form424b3.htm
Prospectus Supplement Filed Pursuant to Rule 424(b)(3)
Registration No. 333-182729


PROSPECTUS SUPPLEMENT NO. 2
DATED MARCH 11, 2013
(To Prospectus Dated and Declared Effective on August 30, 2012)

LIQUIDMETAL TECHNOLOGIES, INC.
 
36,892,194 Shares
 
Common Stock
 
This Prospectus Supplement No. 2 supplements information contained in, and should be read in conjunction with, that certain Prospectus, dated August 30, 2012, of Liquidmetal Technologies, Inc., as supplemented by that certain Prospectus Supplement No. 1, dated September 7, 2012 (“Supplement No. 1”), relating to the offer and sale, from time to time, by the selling stockholders named therein, of up to 36,892,194 shares of our common stock.  This Prospectus Supplement No. 2 is not complete without, and may not be delivered or used except in connection with, the original Prospectus and Supplement No. 1.  

This Prospectus Supplement No. 2 includes the following documents, as filed by us with the Securities and Exchange Commission:

 
·
The attached Current Report on Form 8-K of Liquidmetal Technologies, Inc., as filed with the Securities and Exchange Commission on March 4, 2013; and
 
 
·
The attached Current Report on Form 10-K of Liquidmetal Technologies, Inc., as filed with the Securities and Exchange Commission on February 26, 2013.
 
The Securities and Exchange Commission and state securities regulators have not approved or disapproved these securities or determined if this Prospectus Supplement No. 2 (or the original Prospectus or Supplement No. 1) is truthful or complete.  Any representation to the contrary is a criminal offense.


The date of this Prospectus Supplement No. 2 is March 11, 2013.

 
 

 
 


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549



FORM 8-K

CURRENT REPORT
Pursuant to Section 13 or 15(d) of the
Securities Exchange Act of 1934
 
Date of Report (Date of earliest event reported):  February 28, 2013
 
LIQUIDMETAL TECHNOLOGIES, INC.
(Exact name of registrant as specified in its charter)
 
Delaware
(State or other jurisdiction of incorporation)
001-31332
(Commission File Number)
33-0264467
(I.R.S. Employer Identification No.)

30452 Esperanza
Rancho Santa Margarita, California 92688
(Address of Principal Executive Offices; Zip Code)

Registrant’s telephone number, including area code: (949) 635-2100

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:
 
o
Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
 
o
Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)
 
o
Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2-(b))
 
o
Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))



 
 

 
 
LIQUIDMETAL TECHNOLOGIES, INC.

FORM 8-K
 
Item 5.03.
Changes to the Articles of Incorporation or Bylaws; Change in Fiscal Year..
 
As described more fully below under Item 5.07 of this Current Report on Form 8-K, on February 28, 2013, the stockholders of Liquidmetal Technologies, Inc. (the “Company”) approved an amendment to the Certificate of Incorporation of the Company (the “Amendment”) increasing the number of authorized shares of common stock from 400 million shares to 500 million shares.
 
The description of the Amendment described above is qualified in its entirety by the actual text of the Amendment attached hereto as Exhibit 3.1 and incorporated herein by reference.
 
Item 5.02.
Submission of Matters to a Vote of Security Holders.
 
On February 28, 2013, the Company held a special meeting of stockholders (the “Special Meeting”). At the Special Meeting, the Company’s stockholders approved an amendment to the Company’s Certificate of Incorporation to increase the number of authorized shares of common stock from 400 million to 500 million shares, with the votes being cast at the Special Meeting as follows:
 
FOR
AGAINST
ABSTAIN
BROKER NON-VOTES
143,872,838
61,311,708
557,274
0
 
Item 9.01.
Financial Statements and Exhibits.
 
See the Exhibit Index set forth below for a list of exhibits included with this Form 8-K.
 
 
1

 
 
SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

 
LIQUIDMETAL TECHNOLOGIES, INC.
 
       
 
By:
/s/ Tony Chung
 
   
Tony Chung
 
   
Chief Financial Officer
 

Date:  March 5, 2013
 
 
 

 
 
EXHIBIT INDEX
 
Exhibit Number
 
Description
     
3.1
 
Third Certificate of Amendment to the Certificate of Incorporation of Liquidmetal Technologies, Inc.
 
 
 

 
 
Exhibit 3.1
 
THIRD CERTIFICATE OF AMENDMENT
TO the CERTIFICATE OF INCORPORATION OF
Liquidmetal Technologies, Inc.

Liquidmetal Technologies, Inc., a corporation organized and existing under and by virtue of the General Corporation Law of the State of Delaware (the “General Corporation Law”), does hereby certify as follows:

FIRST:  That the original Certificate of Incorporation of Liquidmetal Technologies, Inc. (the “Corporation”) was filed with the Secretary of State of the State of Delaware on May 15, 2003, and that a Certificate of Ownership and Merger of Liquidmetal Technologies (a California corporation) with and into the Corporation was filed with the Secretary of State of the State of Delaware on May 21, 2003.

SECOND:  That a Certificate of Amendment to the Certificate of Incorporation was filed with the Secretary of State of the State of Delaware on August 4, 2009, and a Second Certificate of Amendment to the Certificate of Incorporation was filed with the Secretary of State of the State of Delaware on June 28, 2012.

THIRD:  That, at a meeting of the Board of Directors of the Corporation, resolutions were duly adopted setting forth a proposed amendment to the Certificate of Incorporation of the Corporation, declaring said amendment to be advisable, and calling a meeting of the stockholders of the Corporation for consideration thereof.  The resolution setting forth the proposed amendments is as follows:

RESOLVED, that the Certificate of Incorporation of this Corporation be amended by changing Article IV thereof so that, as amended, Article IV shall be and read as follows:

“The Corporation shall have authority to issue Five Hundred Ten Million (510,000,000) shares of capital stock, consisting of Five Hundred Million (500,000,000) shares of common stock, $0.001 par value per share  (the “Common Stock”), and Ten Million (10,000,000) shares of preferred stock, $0.001 par value per share (the “Preferred Stock”), of which One Million Eight Hundred Seventy-Five Thousand (1,875,000) shares are hereby designated as “Series A-1 Preferred Stock” and Three Million Two Hundred Eighty-One Thousand Two Hundred Fifty-Three (3,281,253) shares are hereby designated as “Series A-2 Preferred Stock.”  The Preferred Stock authorized by the Certificate of Incorporation, as amended, may be issued from time to time in one or more series.  The Board of Directors is hereby authorized to fix or alter the rights, preferences, privileges and restrictions granted to or imposed upon any series of Preferred Stock, and the number of shares constituting any such series and the designation thereof, or any of them.  The voting powers, designations, preferences and other special rights, and qualifications, limitations and restrictions of the Series A-1 Preferred Stock and Series A-2 Preferred Stock (collectively, the “Series A Preferred Stock”) are set forth in an Amended and Restated Certificate of Designation, Preferences, and Rights previously filed by the Corporation with the Secretary of State of Delaware on November 2, 2010 (the “Series A Certificate of Designation”).”
 
 
 

 
 
FOURTH:  That thereafter, pursuant to a resolution of the Board of Directors of the Corporation, a special  meeting of the stockholders of the Corporation was duly called and held upon notice in accordance with Section 222 of the General Corporation Law at which meeting the necessary number of shares as required by statute were voted in favor of the amendments.

FIFTH:  That said amendments were duly adopted in accordance with the provisions of Section 242 of the General Corporation Law.

SIXTH:  That said amendments shall be effective upon filing in the Office of the Secretary of State of the State of Delaware.

IN WITNESS WHEREOF, the Corporation has caused this Certificate of Amendment to be signed by a duly authorized officer this 5th day of March, 2013.

 
LIQUIDMETAL TECHNOLOGIES, INC.
 
       
 
By:
/s/ Tony Chung
 
   
Name: Tony Chung
 
   
Title: Chief Financial Officer
 
 
 
 

 
 


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
FORM 10-K
 
 
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2012
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the transition period from ____________ to ___________
Commission File No. 000-31332

LIQUIDMETAL TECHNOLOGIES, INC.
(Exact name of Registrant as specified in its charter)
Delaware
 
33-0264467
(State or other jurisdiction of incorporation or
organization)
 
(I.R.S. Employer
Identification No.)
30452 Esperanza
Rancho Santa Margarita, CA 92688
(Address of principal executive offices, zip code)
Registrant’s telephone number, including area code: (949) 635-2100
Securities registered pursuant to Section 12(b) of the Act: None
Securities registered pursuant to Section 12(g) of the Act:
Title of each Class
Common Stock, $0.001 par value
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o  No x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o  No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes  x   No  o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes  o   No  o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K   x
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer o
Accelerated filer o
Non-accelerated filer o
Smaller reporting company x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o  No x
 
The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant as of June 30, 2012 was approximately $24,652,119. For purposes of this calculation only, (i) shares of common stock are deemed to have a market value of $0.30 per share, the closing price of the common stock as reported on the OTC Bulletin Board on June 30, 2012 and (ii) each of the executive officers, directors and persons holding more than 10% of the outstanding common stock as of June 30, 2012 is deemed to be an affiliate.  The number of shares of common stock outstanding as of February 20, 2013 was 255,929,106.
 


 
 

 
 
TABLE OF CONTENTS
 
 
 
 
Page
PART I
 
 
Item 1.
3
  Item 1A. 
12
  Item 1B.
20
 
Item 2.
20
 
Item 3.
20
PART II
 
 
Item 5.
21
 
Item 7. 
22
 
Item 8.
29
  Item 9.
29
  Item 9A.
30
  Item 9B. 30
PART III
 
 
Item 10.
31
 
Item 11.
33
 
Item 12.
36
  Item 13.
40
  Item 14. 
42
PART IV
 
 
Item 15. 
43
 
 
PART I

Forward-Looking Statements

This Annual Report on Form 10-K of Liquidmetal Technologies, Inc. contains “forward-looking statements” that may state our management’s plans, future events, objectives, current expectations, estimates, forecasts, assumptions or projections about the company and its business. Any statement in this report that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believes,” “estimates,” “projects,” “expects,” “intends,” “may,” “anticipate,” “plans,” “seeks,” and similar expressions identify forward-looking statements. Forward-looking statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or result. These statements are not guarantees of future performance, and undue reliance should not be placed on these statements.  It is important to note that our actual results could differ materially from what is expressed in our forward-looking statements due to the risk factors described in the section of this report entitled “Risk Factors” (Item 1A of this report) as well as the following risks and uncertainties:

 
·
Our ability to fund our operations in the short and long term through financing transactions on terms acceptable to us, or at all;
 
·
Our history of operating losses and the uncertainty surrounding our ability to achieve or sustain profitability;
 
·
Our limited history of developing and selling products made from our bulk amorphous alloys;
 
·
Lengthy customer adoption cycles and unpredictable customer adoption practices;
 
·
Our ability to identify, develop, and commercialize new product applications for our technology;
 
·
Competition from current suppliers of incumbent materials or producers of competing products;
 
·
Our ability to identify, consummate, and/or integrate strategic partnerships;
 
·
The potential for manufacturing problems or delays; and
 
·
Potential difficulties associated with protecting or expanding our intellectual property position.

We undertake no obligation to update publicly any forward-looking statements, whether as a result of new information, future events or otherwise.

Item 1. Business

In this Annual Report on Form 10-K, unless the context indicates otherwise, references to “the Company”, “Liquidmetal Technologies”, “our Company”, “we”, “us”, and similar references refer to Liquidmetal Technologies, Inc. and its subsidiaries.

Overview

We are a materials technology company that develops and commercializes products made from amorphous alloys.  Our Liquidmetal® family of alloys consists of a variety of proprietary bulk alloys and composites that utilize the advantages offered by amorphous alloy technology. We design, develop and sell products and components from bulk amorphous alloys to customers in various industries.  We also partner with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products. We believe that our proprietary bulk alloys are the only commercially viable bulk amorphous alloys currently available in the marketplace.

Amorphous alloys are, in general, unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structure that forms in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that we believe will make them preferable to other materials in a variety of applications. The amorphous atomic structure of our alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, our zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. We believe these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a variety of applications. Moreover, we believe these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.
 
 
General Corporate Information

We were originally incorporated in California in 1987, and we reincorporated in Delaware in May 2003.  Our principal executive office is located at 30452 Esperanza, Rancho Santa Margarita, California 92688. Our telephone number at that address is (949) 635-2100. Our Internet website address is www.liquidmetal.com and all of our filings with the Securities and Exchange Commission (“SEC”) are available free of charge on our website.

Our Technology
 
The performance, processing, and potential cost advantages of Liquidmetal alloys are a function of their unique atomic structure and their proprietary material composition.
 
Unique Atomic Structure
 
The atomic structure of Liquidmetal alloys is the fundamental feature that differentiates them from other alloys and metals. In the molten state, the atomic particles of all alloys and metals have an amorphous atomic structure, which means that the atomic particles appear in a completely random structure with no discernible patterns. However, when non-amorphous alloys and metals are cooled to a solid state, their atoms bond together in a repeating pattern of regular and predictable shapes or crystalline grains. This process is analogous to the way ice forms when water freezes and crystallizes. In non-amorphous metals and alloys, the individual crystalline grains contain naturally occurring structural defects that limit the potential strength and performance characteristics of the material. These defects, known as dislocations, consist of discontinuities or inconsistencies in the patterned atomic structure of each grain. Unlike other alloys and metals, bulk Liquidmetal alloys can retain their amorphous atomic structure throughout the solidification process and therefore do not develop crystalline grains and the associated dislocations. Consequently, bulk Liquidmetal alloys exhibit superior strength and other superior performance characteristics compared to their crystalline counterparts.

Prior to 1993, commercially viable amorphous alloys could be created only in thin forms, such as coatings, films, or ribbons. However, in 1993, researchers at the California Institute of Technology (Caltech) developed the first commercially viable amorphous alloy in a bulk form. Today, bulk Liquidmetal alloys can be formed into objects that are up to one inch thick, and we are not aware of any other commercially available amorphous alloys that can achieve this thickness. We obtained the exclusive right to commercialize the bulk amorphous alloy through a license agreement with Caltech and have developed the technology to enable the commercialization of the bulk amorphous alloys.

Proprietary Material Composition

The constituent elements and percentage composition of Liquidmetal alloys are critical to their ability to solidify into an amorphous atomic structure. We have several different alloy compositions that have different constituent elements in varying percentages. These compositions are protected by various patents that we own or exclusively license from third parties, including Caltech. The raw materials that we use in Liquidmetal alloys are readily available and can be purchased from multiple suppliers.

Advantages of Liquidmetal Alloys

Liquidmetal alloys possess a unique combination of performance, processing and cost advantages that we believe makes them superior in many ways to other commercially available materials for a variety of existing and potential future product applications.

Performance Advantages

Our bulk Liquidmetal alloys provide several distinct performance advantages over other materials, and we believe that these advantages make the alloys desirable in applications that require high yield strength, strength-to-weight ratio, elasticity and hardness.

The comparatively high yield strength of bulk Liquidmetal alloys means that a high amount of stress must be exerted to create permanent deformation. However, because the yield strength is so high, the yield strength of many of our bulk Liquidmetal alloys compositions is very near their ultimate strength, which is the measure of stress at which total breakage occurs. Therefore, very little additional stress may be required to break an object made of bulk Liquidmetal alloys once the yield strength is exceeded. Although we believe that the yield strength of many of our bulk alloys exceeds the ultimate strength of most other commonly used alloys and metals, our bulk alloys may not be suitable for certain applications, such as pressurized tanks, in which the ability of the material to yield significantly before it breaks is more important than its strength advantage. Additionally, although our bulk alloys show a high resistance to crack initiation because of their very high strength and hardness, certain of our bulk alloys are sensitive to crack propagation under certain long-term, cyclical loading conditions. Crack propagation is the tendency of a crack to grow after it forms. We continue to develop new alloy compositions that have improved material properties to overcome these limitations.
 
 
Processing Advantages

The processing of a material generally refers to how a material is shaped, formed, or combined with other materials to create a finished product. Bulk Liquidmetal alloys possess processing characteristics that we believe make them preferable to other materials in a wide variety of applications. In particular, our alloys are amenable to processing options that are similar in many respects to those associated with plastics. For example, we believe that bulk Liquidmetal alloys have superior net-shape casting capabilities as compared to high-strength crystalline metals and alloys.  “Net-shape casting” is a type of casting that permits the creation of near-to-net shaped products that reduce costly post-cast processing or machining. Additionally, unlike most metals and alloys, our bulk Liquidmetal alloys are capable of being thermoplastically molded in bulk form. Thermoplastic molding consists of heating a solid piece of material until it is transformed into a moldable state, although at temperatures much lower than the melting temperature, and then introducing it into a mold to form near-to-net shaped products.  Accordingly, thermoplastic molding can be beneficial and economical for net shape fabrication of high-strength products.

Bulk Liquidmetal alloys also permit the creation of composite materials that cannot be created with most non-amorphous metals and alloys. A composite is a material that is made from two or more different types of materials. In general, the ability to create composites is beneficial because constituent materials can be combined with one another to optimize the composite’s performance characteristics for different applications. In other metals and alloys, the high temperatures required for processing could damage some of the composite’s constituent materials and therefore limit their utility. However, the relatively low melting temperatures of bulk Liquidmetal alloys allow mild processing conditions that eliminate or limit damage to the constituent materials when creating composites. In addition to composites, we believe that the processing advantages of Liquidmetal alloys will ultimately allow for a variety of other finished forms, including sheets and extrusions.

Notwithstanding the foregoing advantages, our bulk Liquidmetal alloys possess certain limitations relative to processing. The beneficial processing features of our bulk alloys are made possible in part by the alloys’ relatively low melting temperatures. Although a lower melting temperature is a beneficial characteristic for processing purposes, it renders certain bulk alloy compositions unsuitable for certain high-temperature applications, such as jet engine exhaust components. Additionally, the current one-inch thickness limitation of our zirconium-titanium bulk alloy renders our alloys currently unsuitable for use as structural materials in large-scale applications, such as load-bearing beams in building construction. We continue to engage in research and development with the goal of developing processing technology and new alloy compositions that will enable our bulk alloys to be formed into thicker objects.

Cost Advantages

Liquidmetal alloys have the potential to provide cost advantages over other high-strength metals and alloys in certain applications. Because bulk Liquidmetal alloys have processing characteristics similar in some respects to plastics, which lends itself to near-to-net shape casting and molding, Liquidmetal alloys can in many cases be shaped efficiently into intricate, engineered products. This capability can eliminate or reduce certain post-casting steps, such as machining and re-forming, and therefore has the potential to significantly reduce processing costs associated with making parts in high volume.
 
Our Strategy

The key elements of our strategy include:
 
 
Focusing Our Marketing Activities on Select Products with Optimized Gross-Margins.  We have and continue to focus our marketing activities on select products with optimized gross margins for the long term.  This strategy is designed to align our product development initiatives with our processes and cost structure, and to reduce our exposure to more commodity-type product applications that are prone to unpredictable demand and fluctuating pricing.  Our focus is primarily on products that possess design features that take advantage of our existing and developing manufacturing technology and that command a price commensurate with the performance advantages of our alloys.  In addition, we will continue to engage in prototype manufacturing, both for internally manufactured products and for products that will ultimately be licensed to or manufactured by third parties.
 
 
 
Pursuing Strategic Partnerships In Order to More Rapidly Develop and Commercialize Products.  We have and continue to actively pursue and support strategic partnerships that will enable us to leverage the resources, strength, and technologies of other companies in order to more rapidly develop and commercialize products.  These partnerships may include licensing transactions in which we license full commercial rights to our technology in a specific application area, or they may include transactions of a more limited scope in which, for example, we outsource manufacturing activities or grant limited licensing rights.  We believe that utilizing such a partnering strategy will enable us to reduce our working capital burden, better fund product development efforts, better understand customer adoption practices, leverage the technical and financial resources of our partners, and more effectively handle product design and process challenges.
 
 
Advancing the Liquidmetal® Brand. We believe that building our corporate brand will foster continued adoption of our technology.  Our goal is to position Liquidmetal alloys as a superior substitute for materials currently used in a variety of products across a range of industries. Furthermore, we seek to establish Liquidmetal alloys as an enabling technology that will facilitate the creation of a broad range of commercially viable new products. To enhance industry awareness of our company and increase demand for Liquidmetal alloys, we are engaged in various brand development strategies that could include collaborative advertising and promotional campaigns with select customers, industry conference and trade show appearances, public relations, and other means.
 
Applications for Liquidmetal Alloys

We have focused our commercialization efforts for Liquidmetal alloys on four identified product areas.  We believe that these areas are consistent with our strategy in terms of market size, building brand recognition, and providing an opportunity to develop and refine our processing capabilities. Although we believe that strategic partnership transactions could create valuable opportunities beyond the parameters of these target markets, we anticipate continuing to pursue these markets both internally and in conjunction with partners.

Components for Non-Consumer Electronic Products

We design, develop and produce components for non-consumer electronic devices utilizing our bulk Liquidmetal alloys and believe that our alloys offer enhanced performance and design benefits for these components in certain applications.  Our strategic focus is primarily on parts that command a price commensurate with the performance advantages of our alloys.  These product categories in the non-consumer electronics field include, but are not limited to, parts for high end printers, commercial imaging devices, aerospace components, medical devices, automotive components and industrial machines.  We believe that there are multiple applications and opportunities in the non-consumer electronics product category for us to produce parts that command the higher margin and premium prices consistent with our core business strategy.

We believe that the continued miniaturization of, and the introduction of advanced features to non-consumer electronic devices is a primary driver of growth, market share, and profits in our industry.  The high strength-to-weight ratio and elastic limit and the processing advantages of bulk Liquidmetal alloys enable the production of smaller, thinner, but stronger electronic parts.  We also believe that the strength characteristics of our alloys could facilitate the creation of a new generation of non-consumer electronic devices which currently may not be viable because of strength limitations of conventional metal parts in the marketplace today.  Lastly, we believe that our alloys offer style and design flexibility, such as shiny metallic finishes, to accommodate the changing tastes of our customers.

On August 5, 2010, we entered into a license transaction with Apple Inc. (“Apple”) pursuant to which, for a one time license fee, we granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize our intellectual property in the field of “consumer electronic” products, as defined in the license agreement.  As a result, we will not pursue application of our bulk Liquidmetal alloys in the consumer electronics field.  However, we continue to work with Apple to develop and advance research and development in the amorphous alloy space to benefit both consumer and non-consumer electronics fields.  For more information regarding our transaction with Apple, see “ – Significant Transactions” below.

Aerospace and Defense

We design and develop components for aerospace and defense customers to meet their requirements for complex, high strength parts with precision tolerances through our near net-shape molding process. Some of the parts we have developed cannot be made by any other conventional fabrication process, offering designers of high performance, mission critical systems unique alternatives.
 
 
Because of the high degree of uniformity and consistency of our volume molding process, we are able to reduce significant costs associated with machining and verifying the dimensional tolerances of high precision parts and post-fabrication steps required to apply highly polished surfaces. Additional key properties for the aerospace and defense market are Liquidmetal’s tensile strength, hardness, wear resistance, resistance to corrosion, and Liquidmetal’s unique properties associated with explosives and munitions.
 
The many high value and specialized applications within the aerospace and defense industry present significant opportunities for our technology and solutions, and as they are designed into key systems, will provide us with potential long-term revenue streams.

Sporting Goods and Leisure Products

We are developing a variety of applications for Liquidmetal alloys in the sporting goods and leisure products area.

In the sporting goods industry, we believe that the high strength, hardness, and elasticity of our bulk alloys have the potential to enhance performance in a variety of products including but not limited to golf clubs, tennis rackets and skis.  We further believe that many sporting goods products are conducive to our strategy of focusing on high-margin products that meet our design criteria.

In the leisure products category, we believe that bulk Liquidmetal alloys can be used to efficiently produce intricately engineered designs with high-quality finishes, such as premium watchcases, and we further believe that Liquidmetal alloy technology can be used to make high-quality, high-strength jewelry from precious metals.  We have successfully produced prototype rings made from an amorphous Liquidmetal platinum alloy that is harder (and hence more scratch resistant) than conventional platinum jewelry.

Medical Devices

We are engaged in product development efforts relating to various medical devices that could be made from bulk Liquidmetal alloys. We believe that the unique properties of bulk Liquidmetal alloys provide a combination of performance and cost benefits that could make them a desirable replacement to incumbent materials, such as stainless steel and titanium, currently used in various medical device applications.  Our ongoing emphasis has been on surgical instrument applications for Liquidmetal alloys. These include, but are not limited to, specialized blades, orthopedic instruments utilized for implant surgery procedures, dental devices, and general surgery devices. The potential value offered by our alloys is higher performance in some cases and cost reduction in others, the latter stemming from the ability of Liquidmetal alloys to be net shape cast into components, thus reducing costs of secondary processing. The status of most components in the prototyping phase is subject to non-disclosure agreements with our customers.

We believe that our future success in the medical device market will be driven largely by strategically aligning ourselves with well-established companies that are uniquely positioned to facilitate the introduction of Liquidmetal alloys into this market, especially as it relates to the unique processing challenges and stringent material qualification requirements that are prevalent in this industry.  We also believe that our prospects for success in this market will be enhanced through our focus on optimizing existing alloy compositions and developing new alloy compositions to satisfy the industry’s rigorous material qualification standards.

Licensing Transactions

Transaction with Visser Precision Cast, LLC

On June 1, 2012, the Company entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

Under the manufacturing/sublicense component of the Visser MTA Agreement, the Company has agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions.  Further, the Company has agreed to sublicense to Visser, on a fully-paid up, royalty-free, irrevocable, perpetual, worldwide basis, all intellectual property rights held by the Company.  In addition, Visser has a right of first refusal over any proposed transfer by the Company of its technology pursuant to any license, sublicense, sale or other transfer, other than a license to a machine or alloy vendor.
 
 
Under the Visser MTA Agreement, the Company issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000,000 and (ii) warrants to purchase 15,000,000 shares of common stock at an exercise price of $0.22 per share which expire on June 1, 2017. All of the shares of common stock issuable upon exercise of the warrants is subject to a lock-up period through December 31, 2016.

Apple License Transaction

On August 5, 2010, the Company entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) the Company contributed substantially all of its intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to the Company a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use.  Additionally, in connection with the license transaction, Apple required the Company to complete a statement of work related to the exchange of Liquidmetal intellectual property information.  The Company recognized a portion of the one-time license fee upon receipt of the initial payment and completion of the foregoing requirements under the license transaction.  The remaining portion of the one-time license fee was recognized at the completion of the required statement of work.

Under the agreements relating to the license transaction with Apple, the Company is obligated to contribute all intellectual property that it developed through February 2012 (and subsequently amended to extend through February 2014) to CIP. The Company is also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

Other License Transactions

On January 31, 2012, the Company and Engel Austria Gmbh (“Engel”) entered into a Supply and License Agreement for a five year term whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to the Company’s licensees.

On November 16, 2011, the Company and Materion Brush Inc. (“Materion”) entered into a Development Agreement to evaluate, analyze and develop amorphous alloy feedstock to be supplied in commercial quantities.  Further, on June 17, 2012, the Company entered into a Sales Representation Agreement with Materion whereby Materion shall promote the sale of Liquidmetal’s products for certain commissions.  This agreement is for a two year initial term with annual, automatic renewals.

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf.  This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf.  Liquidmetal Technologies owns 79% of the outstanding common stock in Liquidmetal Golf.

In June 2003, the Company entered into an exclusive license agreement with LLPG, Inc. (“LLPG”).  Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG.  The exclusive license agreement with LLPG expires on December 31, 2021.

In March 2009, the Company entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a perpetual non-exclusive license to the Company’s technology to produce and market watches and certain other luxury products.  In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches, and the Company’s license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. The Company will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch.  The license agreement with Swatch will expire on the expiration date of the last licensed patent.

Our Intellectual Property

Pursuant to our transaction with Apple described under “ – Significant Transactions” above, we license substantially all our intellectual property from our wholly-owned subsidiary, Crucible Intellectual Property, LLC.  Our intellectual property consists of patents, trade secrets, know-how, and trademarks. Protection of our intellectual property is a strategic priority for our business, and we intend to vigorously protect our patents and other intellectual property. Our intellectual property portfolio includes 55 owned or licensed U.S. patents and numerous patent applications relating to the composition, processing, and application of our alloys, as well as various foreign counterpart patents and patent applications.
 
 
Our initial bulk amorphous alloy technology was developed by researchers at the California Institute of Technology (“Caltech”). We have acquired patent rights that provide us with the exclusive right to commercialize the amorphous alloy and other amorphous alloy technology developed at Caltech through a license agreement (“Caltech License Agreement”) with Caltech.  In addition to the patents and patent applications that we license from Caltech, we are building a portfolio of our own patents to expand and enhance our technology position. These patents and patent applications primarily relate to various applications of our bulk amorphous alloys and the processing of our alloys. The patents expire on various dates between 2013 and 2028. Our policy is to seek patent protection for all technology, inventions, and improvements that are of commercial importance to the development of our business, except to the extent that we believe it is advisable to maintain such technology or invention as a trade secret.

In order to protect the confidentiality of our technology, including trade secrets, know-how, and other proprietary technical and business information, we require that all of our employees, consultants, advisors and collaborators enter into confidentiality agreements that prohibit the use or disclosure of information that is deemed confidential. The agreements also obligate our employees, consultants, advisors and collaborators to assign to us developments, discoveries and inventions made by such persons in connection with their work with us.

Research and Development

We are engaged in ongoing research and development programs that are driven by the following key objectives:
 
 
Enhance Material Processing and Manufacturing Efficiencies. We are working with our strategic partners to enhance material processing and manufacturing efficiencies.  We plan to continue research and development of processes and compositions that will decrease our cost of making products from Liquidmetal alloys.
 
 
Optimize Existing Alloys and Develop New Compositions.  We believe that the primary technology driver of our business will continue to be our proprietary alloy compositions. We plan to continue research and development on new alloy compositions to generate a broader class of amorphous alloys with a wider range of specialized performance characteristics.  We believe that a larger alloy portfolio will enable us to increase the attractiveness of our alloys as an alternative to incumbent materials and, in certain cases, drive down product costs.  We also believe that our ability to optimize our existing alloy compositions will enable us to better tailor our alloys to our customers’ specific application requirements.
 
 
Develop New Applications. We will continue the research and development of new applications for Liquidmetal alloys. We believe the range of potential applications will broaden by expanding the forms, compositions, and methods of processing of our alloys.
 
We conduct our research and development programs internally and also through strategic relationships that we enter into with third parties. As of December 31, 2012, our internal research and development efforts are conducted by a team of four scientists and engineers each of whom we either employ directly or engage as a consultant.

In addition to our internal research and development efforts, we enter into cooperative research and development relationships with leading academic institutions.  We have entered into development relationships with other companies for the purpose of identifying new applications for our alloys and establishing customer relationships with such companies. Some of our product development programs are partially funded by our customers. We are also engaged in negotiations with other potential customers regarding possible product development relationships. Our research and development expenses for the years ended December 31, 2012, and 2011 were $0.943 million and $1.1 million, respectively.

Raw Materials

Liquidmetal alloy compositions are comprised of many elements, all of which are generally available commodity products. We believe that each of these raw materials is readily available in sufficient quantities from multiple sources on commercially acceptable terms. However, any substantial increase in the price or interruption in the supply of these materials could have an adverse effect on our business.
 
 
Manufacturing
 
Our current manufacturing strategy is to partner with global companies that are contract manufacturers and alloy producers.  We are seeking third party companies with a proven track record of success and that can gain specialized skills and knowledge of our alloys through close collaborations with our team of scientists and engineers.  We believe that partnering with these global companies will allow us to forgo the capital intensive requirements of maintaining our own manufacturing facilities and allow us to focus on our core business which is to expand our patent portfolio of intellectual property and develop long term relationships with our customers.

Under the manufacturing/sublicense component of the Visser MTA Agreement, the Company has agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions.

Customers

During 2012, there were 3 major customers, who together accounted for 70% of our revenue.  During 2011, there were three major customers, who together accounted for 66% of our revenue.  In the future, we expect that a significant portion of our revenue may continue to be concentrated in a limited number of customers, even if our bulk alloys business grows.

Competition

Other than our authorized licensees, we are not aware of any other company or business that manufactures, markets, distributes, or sells bulk amorphous alloys or products made from bulk amorphous alloys. We believe it would be difficult to develop a competitive bulk amorphous alloy without infringing our patents. However, our bulk Liquidmetal alloys face competition from other materials, including metals, alloys, plastics and composites, which are currently used in the commercial applications that we pursue. For example, we face significant competition from plastics, zinc and stainless steel in our non-consumer electronics components business, and titanium and composites will continue to be used widely in medical devices and sporting goods. Many of these competitive materials are produced by domestic and international companies that have substantially greater financial and other resources than we do.  Based on our experience with developing products for a variety of customers, we believe that the selection of materials by potential customers will continue to be product-specific in nature, with the decision for each product being driven primarily by the performance needs of the application and secondarily by cost considerations and design flexibility. Because of the relatively high strength of our alloys and the design flexibility of our process, we are most competitive when the customer is seeking a higher strength as well as greater design flexibility than currently available with other materials. However, if currently available materials, such as plastics, are strong enough for the application, our alloys are often not competitive in those applications with respect to price. We also believe that our alloys are generally not competitive with the cost of some of the basic metals, such as steel, aluminum or copper, when such basic metals can be used in specific applications, but our alloys are generally more competitive with price on more exotic metals, such as titanium. Our alloys could also face competition from new materials that may be developed in the future, including new materials that could render our alloys obsolete.

We will also experience indirect competition from the competitors of our customers. Because we will rely on our customers to market and sell finished goods that incorporate our components or products, our success will depend in part on the ability of our customers to effectively market and sell their own products and compete in their respective markets.

Backlog

Because of the minimal lead-time associated with orders of bulk alloy parts, we generally do not carry a significant backlog.  The backlog as of any particular date gives no indication of actual sales for any succeeding period.

Sales and Marketing

We direct our marketing efforts towards customers that will incorporate our components and products into their finished goods. To that end, we have hired additional business development personnel who, in conjunction with engineers and scientists, will actively identify potential customers that may be able to benefit from the introduction of Liquidmetal alloys to their products.  We currently have 3 full-time employees and 1 contractor engaged in sales and marketing activities.

Employees

As of December 31, 2012, we had 19 full-time employees. As of that date, none of our employees were represented by a labor union.  We have not experienced any work stoppages and we consider our employee relations to be favorable.
 
 
Governmental Regulation
 
Government regulation of our products will depend on the nature and type of product and the jurisdictions in which the products are sold.  For example, medical instruments incorporating our Liquidmetal alloys will be subject to regulation in the United States by the FDA and corresponding state and foreign regulatory agencies.  Medical device manufacturers to whom we intend to sell our products may need to obtain FDA approval before marketing their medical devices that incorporate our products and may need to obtain similar approvals before marketing these medical device products in foreign countries.

Environmental Law Compliance

Beryllium is a minor constituent element of some of our alloys.  The processing of beryllium can result in the release of beryllium into the workplace and the environment and in the creation of beryllium oxide as a by-product. Beryllium is classified as a hazardous air pollutant, a toxic substance, a hazardous substance, and a probable human carcinogen under environmental, safety, and health laws, and various acute and chronic health effects may result from exposure to beryllium.  We are required to comply with certain regulatory requirements and to obtain a permit from the U.S. Environmental Protection Agency or other government agencies to process beryllium.

Our operations are subject to other national, state, and local environmental laws in the United States.  We believe that we are in material compliance with all applicable environmental regulations.  While we continue to incur costs to comply with environmental regulations, we do not believe that such costs will have a material effect on our capital expenditures, earnings, or competitive position.

Golf Subsidiary

From 1997 until September 2001, we were engaged in the retail marketing and sale of golf clubs through a majority owned subsidiary, Liquidmetal Golf. The retail business of Liquidmetal Golf was discontinued in September 2001. However, in December 2012, we recommenced activities and discussions with potential partners regarding the development of golf club components for golf original equipment manufacturers that will integrate these components into their own clubs and then sell them under their respective brand names. Liquidmetal Technologies owns 79% of the outstanding common stock in Liquidmetal Golf.

Our Liquidmetal Golf subsidiary has the exclusive right and license to utilize our Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf. This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf. In consideration of this license, Liquidmetal Golf has issued 4,500,000 shares of Liquidmetal Golf common stock to Liquidmetal Technologies, which comprises of Liquidmetal Technologies’ 79% ownership interest in Liquidmetal Golf.
 
 
Item 1A. Risk Factors

Investing in our securities involves a high degree of risk. The risks described below are not the only ones facing us. Additional risks not currently known to us or that we currently believe are immaterial also may impair our business, operations, liquidity and stock price materially and adversely. You should carefully consider the risks and uncertainties described below in addition to the other information included or incorporated by reference in this Annual Report on Form 10-K. If any of the following risks actually occur, our business, financial condition or results of operations would likely suffer. In that case, the trading price of our common stock could fall and you could lose all or part of your investment
 
We have limited funds to support our current operations.
 
We anticipate that our current capital resources, together with anticipated cash from operations, will be sufficient to fund our operations through the end of 2013.  We have a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale. Furthermore, Visser’s ability to produce our products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of its control, including the nature and design of the component, the customer’s specifications, and required delivery schedules. Such factors may require that we raise additional funds to support our operations beyond 2013. If funding is insufficient at any time in the future, we may be required to alter or reduce the scope of our operations.

Our indebtedness reduces our financial flexibility and could impede out ability to operate.

In a private placement completed on July 2, 2012, we issued an aggregate of $12.0 million in principal amount of senior convertible notes (the “Convertible Notes”).  The Convertible Notes are payable in twelve equal monthly installments which began in October 2012.  Although the Convertible Notes are payable through the issuance of shares of our common stock to holders of the Convertible Notes, the ability to issue stock in satisfaction of the note payments is subject to various conditions (including trading volume conditions) that we may not be able to meet.  In such event, we could be required to use cash to repay some or all of a portion of the Convertible Notes, and we may not have the funds to make such payments when due.

To date, we have not met the conditions for paying the installment payments under the Convertible Notes in shares of stock, but the holders of such notes have waived such conditions, and there is no assurance that they will continue to waive such conditions in the future.  Even if we do have the funds to make cash payments in satisfaction of the installment payments due under the Convertible Notes, the payments may adversely affect our ability to fund our operations.  Additionally, documents relating to the issuance of the Convertible Notes impose certain restrictive covenants on us that may impede our ability to operate our company.  For example, they prevent us from incurring additional debt, with certain exceptions, while the Convertible Notes are still outstanding.  Even if we have the right to satisfy the Convertible Notes by issuing shares of our common stock, the shares issued to the holders of the Convertible Notes could be highly dilutive to our shareholders.

We anticipate that we will make payments on the Convertible Notes in shares of our common stock, which could be highly dilutive to holders of our common stock.

We do not believe that we have the financial ability to make all payments on the Convertible Notes in cash when due. Accordingly, we intend to make such payments in shares of our common stock to the greatest extent possible. Because the price at which we will issue shares to the notes will vary with the market price of our common stock, the repayment of the Convertible Notes with shares of our common stock will be highly dilutive.

We have incurred significant operating losses in the past and may not be able to achieve or sustain profitability in the future.

We have experienced significant cumulative operating losses since our inception.  Our operating loss for the fiscal year ended December 31, 2012 was $11.8 million while our operating loss for the fiscal year ended December 31, 2011 was $6.5 million.  We had an accumulated deficit of approximately $189.9 million at December 31, 2012. Of this accumulated deficit, $52.1 million was attributable to losses generated by our discontinued parts manufacturing and coatings businesses.  We anticipate that we may continue to incur operating losses for the foreseeable future.  Consequently, it is possible that we may never achieve positive earnings and, if we do achieve positive earnings, we may not be able to achieve them on a sustainable basis.
 
 
We have a limited history of developing and selling products made from our bulk amorphous alloys.
 
We have a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale.  Furthermore, our supplier’s ability to produce our products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of its control, including the nature and design of the component, the customer’s specifications, and required delivery timelines.
 
We rely on assumptions about the markets for our products and components that, if incorrect, may adversely affect our profitability.
 
We have made assumptions regarding the market size for, and the manufacturing requirements of, our products and components based in part on information we received from third parties and also from our limited history. If these assumptions prove to be incorrect, we may not achieve anticipated market penetration revenue targets or profitability.
 
Our historical results of operations may not be indicative of our future results.
 
As a result of our limited history of developing and marketing bulk amorphous alloy components and products, as well as our new manufacturing strategy of partnering with contract manufacturers and alloy producers, our historical results of operations may not be indicative of our future results.
 
We have entered into an exclusive manufacturing arrangement with Visser Precision Cast, LLC.
 
Pursuant to the terms of a manufacturing services agreement dated June 1, 2012 (the “Visser Manufacturing Services Agreement”) between the Company and Visser Precision Cast, LLC (“Visser”), we have engaged Visser as our exclusive manufacturer of conventional products and components and licensed products and components, which are products and components using or incorporating any of our intellectual property for all fields of use other than consumer electronic products and fields of use covered by exclusive licenses and sublicenses existing on the date of the Visser Manufacturing Services Agreement (such intellectual property, the “LMT Technology”).  We have further agreed that we will not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations using the LMT Technology, except for certain limited exceptions.  The term of the Visser Manufacturing Services Agreement is perpetual.  Pursuant to the terms of a sublicense agreement dated June 1, 2012 between our company and Visser, we agreed to sublicense to Visser, on a fully-paid up, royalty-free, irrevocable, perpetual, worldwide basis, all rights held by us in the LMT Technology.  In addition, Visser has a right of first refusal over any proposed transfer by us of LMT Technology pursuant to any license, sublicense, sale or other transfer, other than a license to a machine or alloy vendor.
 
A disruption of the operations of Visser could cause significant delays in shipments of our products and may adversely affect our revenue, cost of goods sold and results of operations.  Furthermore, Visser’s ability to produce our products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of its control, including the nature and design of the component, the customer’s specifications, and required delivery timelines.
 
We primarily rely on sole source suppliers for mold making, manufacturing and alloying of our bulk amorphous alloy and parts, as well as the manufacturing of our bulk amorphous alloy production machines.
 
We currently have one supplier who fulfills the mold making and manufacturing of our bulk amorphous alloy parts.  Our supplier may allocate its limited capacity to fulfill the production requirements of its other customers.  In the event of a disruption of the operations of our supplier, we may not have a secondary manufacturing source immediately available. Such an event could cause significant delays in shipments and may adversely affect our revenue, cost of goods sold and results of operations.
 
We currently have one supplier who fulfills our alloying/manufacturing of bulk amorphous alloys. In the event of a disruption of the operations of our alloy supplier, we may not have a secondary alloying source immediately available. Such an event could cause significant delays in shipments and may adversely affect our revenue, cost of goods sold and results of operations.
 
Our bulk amorphous alloy production machines are manufactured by limited suppliers.  Orders for additional machines are estimated to be built with a 26-week lead time.  If our bulk alloy parts supplier requires more production machines to manufacture customer parts due to an unexpected demand, we may experience delays in shipment, increased cost of goods sold or loss in revenues.  Additionally, in the event of a disruption in the operations of our production machine suppliers, our bulk alloy parts supplier may not have a secondary machine manufacturer immediately available.  Such an event could cause significant delays in fulfilling customers’ orders and may adversely affect our revenue, cost of goods sold and results of operations.
 
 
We rely on a supplier that has limited experience in manufacturing our products, and our supplier may encounter manufacturing problems or delays or may be unable to produce sufficient, high-quality products at acceptable costs.
 
We rely on our supplier to manufacture all of our Liquidmetal alloy products, including products that we develop in conjunction with our customers.  Our supplier has limited experience in manufacturing our products and may be required to manufacture a range of products in high volumes while ensuring high quality and consistency.  We cannot assure you that our supplier will be able to meet all of our manufacturing needs.  We also cannot assure you that our supplier will be able to produce the intended products with the production yields, quality controls, and production costs that we currently assume.
 
If we cannot establish and maintain relationships with customers that incorporate our components and products into their finished goods, we will not be able to increase our revenue and commercialize our products.
 
Our business is based upon the commercialization of a new and unique materials technology. Our ability to increase our revenues will depend on our ability to successfully maintain and establish relationships with customers who are willing to incorporate our proprietary alloys and technology into their finished products. However, we believe that the size of our company and the novel nature of our technology and manufacturing process may continue to make it challenging to maintain and establish such relationships. In addition, we rely and will continue to rely to a large extent on the manufacturing, research, and development capabilities, as well as the marketing and distribution capabilities, of our customers in order to commercialize our products. Our future growth and success will depend in large part on our ability to enter into these relationships and the subsequent success of these relationships. Even if our products are selected for use in a customer’s products, we still may not realize significant revenue from that customer if that customer’s products are not commercially successful.
 
It may take significant time and cost for us to develop new customer relationships, which may delay our ability to generate additional revenue or achieve profitability.
 
Our ability to generate revenue from new customers is generally affected by the amount of time it takes for us to, among other things:
 
 
identify a potential customer and introduce the customer to Liquidmetal alloys;
 
 
work with the customer to select and design the parts to be fabricated from Liquidmetal alloys;
 
 
make the molds and tooling to be used to produce the selected part;
 
 
make prototypes and samples for customer testing;
 
 
work with our customers to test and analyze prototypes and samples; and
 
 
with respect to some types of products, such as medical devices, obtain regulatory approvals.
 
We believe that our average sales cycle (the time we deliver a proposal to a customer until the time our customer fully integrates our Liquidmetal alloys into its product) could be a significant period of time. Our history to date has demonstrated that the sales cycle could extend beyond two years. The time it takes to transition a customer from limited production to full-scale production runs will depend upon the nature of the processes and products into which our Liquidmetal alloys are integrated.  Moreover, we have found that customers often proceed very cautiously and slowly before incorporating a fundamentally new and unique type of material into their products.
 
 
After we develop a customer relationship, it may take a significant amount of time for that customer to develop, manufacture, and sell finished goods that incorporate our components and products.
 
Our experience has shown that our customers will perform numerous tests and extensively evaluate our components and products before incorporating them into their finished products. The time required for testing, evaluating, and designing our components and products into a customer’s products, and in some cases, obtaining regulatory approval, can be significant, with an additional period of time before a customer commences volume production of products incorporating our components and products, if ever. Moreover, because of this lengthy development cycle, we may experience a delay between the time we accrue expenses for research and development and sales and marketing efforts and the time when we generate revenue, if any. We may incur substantial costs in an attempt to transition a customer from initial testing to prototype and from prototype to final product. If we are unable to minimize these transition costs, or to recover the costs of these transitions from our customers, our operating results will be adversely affected.
 
A limited number of our customers generate a significant portion of our revenue.
 
For the near future, we expect that a significant portion of our revenue may be concentrated in a limited number of customers.  A reduction, delay, or cancellation of orders from one or more of these customers or the loss of one or more customer relationships could significantly reduce our revenue and harm our business. Unless we establish long-term sales arrangements with these customers, they will have the ability to reduce or discontinue their purchases of our products on short notice.
 
We expect to rely on our customers to market and sell finished goods that incorporate our products and components, a process over which we will have little control.
 
Our future revenue growth and ultimate profitability will depend in part on the ability of our customers to successfully market and sell their finished goods that incorporate our products. We will have little control over our customers’ marketing and sales efforts. These marketing and sales efforts may be unsuccessful for various reasons, any of which could hinder our ability to increase revenue or achieve profitability. For example, our customers may not have or devote sufficient resources to develop, market, and sell their finished goods that incorporate our products. Because we typically will not have exclusive sales arrangements with our customers, they will not be precluded from exploring and adopting competing technologies. Also, products incorporating competing technologies may be more successful for reasons unrelated to the performance of our customers’ products or the marketing efforts of our customers.
 
Our growth depends on our ability to identify, develop, and commercialize new applications for our technology.
 
Our future growth and success will depend in part on our ability to identify, develop, and commercialize, either alone or in conjunction with our customers, new applications and uses for Liquidmetal alloys. If we are unable to identify and develop new applications, we may be unable to develop new products or generate additional revenue. Successful development of new applications for our products may require additional investment, including costs associated with research and development and the identification of new customers. In addition, difficulties in developing and achieving market acceptance of new products would harm our business.
 
We may not be able to effectively compete with current suppliers of incumbent materials or producers of competing products.
 
The future growth and success of our Liquidmetal alloy business will depend in part on our ability to establish and retain a technological advantage over other materials for our targeted applications. For many of our targeted applications, we will compete with manufacturers of similar products that use different materials many of which have substantially greater financial and other resources than we do. These different materials may include plastics, zinc, titanium alloys, or stainless steel, among others, and we will compete directly with suppliers of the incumbent material. In addition, in each of our targeted markets, our success will depend in part on the ability of our customers to compete successfully in their respective markets. Thus, even if we are successful in replacing an incumbent material in a finished product, we will remain subject to the risk that our customer will not compete successfully in its own market.
 
Our bulk amorphous alloy technology is still at an early stage of commercialization relative to many other materials.
 
Our bulk amorphous alloy technology is a relatively new technology as compared to many other material technologies, such as plastics and widely-used high-performance crystalline alloys.  Historically, the successful commercialization of a new materials technology has required the persistent improvement and refining of the technology over a sometimes lengthy period of time.  Accordingly, we believe that our company’s future success will be dependent on our ability to continue expanding and improving our technology platform by, among other things, constantly refining and improving our processes, optimizing our existing amorphous alloy compositions for various applications, and developing and improving new bulk amorphous alloy compositions.  Our failure to further expand our technology base could limit our growth opportunities and hamper our commercialization efforts.
 
 
Future advances in materials science could render Liquidmetal alloys obsolete.
 
Academic institutions and business enterprises frequently engage in the research and testing of new materials, including alloys and plastics. Advances in materials science could lead to new materials that have a more favorable combination of performance, processing, and cost characteristics than our alloys. The future development of any such new materials could render our alloys obsolete and unmarketable or may impair our ability to compete effectively.
 
Our growth depends upon our ability to retain and attract a sufficient number of qualified employees.
 
Our business is based upon the commercialization of a new and unique materials technology. Our future growth and success will depend in part on our ability to retain key members of our management and scientific staff, who are familiar with this technology and the potential applications and markets for it. We do not have “key man” or similar insurance on any of the key members of our management and scientific staff.  If we lose their services or the services of other key personnel, our financial results or business prospects may be harmed. Additionally, our future growth and success will depend in part on our ability to attract, train, and retain scientific engineering, manufacturing, sales, marketing, and management personnel. We cannot be certain that we will be able to attract and retain the personnel necessary to manage our operations effectively. Competition for experienced executives and scientists from numerous companies and academic and other research institutions may limit our ability to hire or retain personnel on acceptable terms. In addition, many of the companies with which we compete for experienced personnel have greater financial and other resources than we do. Moreover, the employment of otherwise highly qualified non-U.S. citizens may be restricted by applicable immigration laws.
 
We may not be able to successfully identify, consummate, or integrate strategic partnerships.
 
As a part of our business strategy, we intend to pursue strategic partnering transactions that provide access to new technologies, products, markets, and manufacturing capabilities. These transactions could include licensing agreements, joint ventures, or business combinations. We believe that these transactions will be particularly important to our future growth and success due to the size and resources of our company and the novel nature of our technology. For example, we may determine that we may need to license our technology to a larger manufacturer in order to penetrate a particular market. In addition, we may pursue transactions that will give us access to new technologies that are useful in connection with the composition, processing, or application of Liquidmetal alloys. We may not be able to successfully identify any potential strategic partnerships. Even if we do identify one or more potentially beneficial strategic partners, we may not be able to consummate transactions with these strategic partners on favorable terms or obtain the benefits we anticipate from such a transaction.
 
We may derive some portion of our revenue from sales outside the United States which may expose the Company to foreign commerce risks.
 
We may sell a portion of our products to customers outside of the United States, and our operations and revenue may be subject to risks associated with foreign commerce, including transportation delays and foreign tax/legal compliance. Moreover, customers may sell finished goods that incorporate our components and products outside of the United States, which exposes us indirectly to additional foreign commerce risks.
 
A substantial increase in the price or interruption in the supply of raw materials for our alloys could have an adverse effect on our profitability.
 
Our proprietary alloy compositions are comprised of many elements, all of which are generally available commodity products. Although we believe that each of these raw materials is currently readily available in sufficient quantities from multiple sources on commercially acceptable terms, if the prices of these materials substantially increase or there is an interruption in the supply of these materials, such increase or interruption could adversely affect our profitability. For example, if the price of one of the elements included in our alloys substantially increases, we may not be able to pass the price increase on to our customers.
 
 
Our business could be subject to the potential adverse consequences of exchange rate fluctuations.
 
We expect to conduct business in various foreign currencies and will be exposed to market risk from changes in foreign currency exchange rates and interest rates. Fluctuations in exchange rates between the U.S. dollar and such foreign currencies may have a material adverse effect on our business, results of operations, and financial condition and could specifically result in foreign exchange gains and losses. The impact of future exchange rate fluctuations on our operations cannot be accurately predicted. To the extent that the percentage of our non-U.S. dollar revenue derived from international sales increases in the future, our exposure to risks associated with fluctuations in foreign exchange rates will increase further.
 
Our inability to protect our licenses, patents, trademarks, and proprietary rights in the United States and foreign countries could harm our business.
 
We own several patents relating to amorphous alloy technology, and we have other rights to amorphous alloy patents through an exclusive license from the California Institute of Technology (“Caltech”).  Our success depends in part on our ability to obtain and maintain patent and other proprietary right protection for our technologies and products in the United States and other countries. If we are unable to obtain or maintain these protections, we may not be able to prevent third parties from using our proprietary rights. Specifically, we must:
 
 
protect and enforce our owned and licensed patents and intellectual property;
 
 
exploit our owned and licensed patented technology; and
 
 
operate our business without infringing on the intellectual property rights of third parties.
 
Our licensed technology is comprised of several issued United States patents covering the composition and method of manufacturing of the family of Liquidmetal alloys. We also hold several United States and corresponding foreign patents covering the manufacturing processes of Liquidmetal alloys and their use. Those patents have expiration dates between 2013 and 2028.  The laws of some foreign countries do not protect proprietary rights to the same extent as the laws of the United States, and we may encounter significant problems and costs in protecting our proprietary rights in these foreign countries.
 
In August 2010, we entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) we contributed substantially all of our intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, and (iii) CIP granted back to us a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use.
 
Patent law is still evolving relative to the scope and enforceability of claims in the fields in which we operate. Our patent protection involves complex legal and technical questions. Our patents and those patents for which we have license rights may be challenged, narrowed, invalidated, or circumvented. We may be able to protect our proprietary rights from infringement by third parties only to the extent that our proprietary technologies are covered by valid and enforceable patents or are effectively maintained as trade secrets. Furthermore, others may independently develop similar or alternative technologies or design around our patented technologies. Litigation or other proceedings to defend or enforce our intellectual property rights could require us to spend significant time and money and could otherwise adversely affect our business.
 
Other companies or individuals may claim that we infringe their intellectual property rights, which could cause us to incur significant expenses or prevent us from selling our products.
 
Our success depends, in part, on our ability to operate without infringing on valid, enforceable patents or proprietary rights of third parties and without breaching any licenses that may relate to our technologies and products. Future patents issued to third parties may contain claims that conflict with our patents and that compete with our products and technologies, and third parties could assert infringement claims against us. Any litigation or interference proceedings, regardless of their outcome, may be costly and may require significant time and attention of our management and technical personnel. Litigation or interference proceedings could also force us to:
 
 
stop or delay using our technology;
 
 
stop or delay our customers from selling, manufacturing or using products that incorporate the challenged intellectual property;
 
 
 
pay damages; or
 
 
enter into licensing or royalty agreements that may be unavailable on acceptable terms.
 
Evolving regulation of corporate governance and public disclosure may result in additional expenses and continuing uncertainty.
 
Changing laws, regulations and standards relating to corporate governance and public disclosure, including the SEC XBRL mandate, new SEC regulations and International Financial Reporting Standards (IFRS), are creating uncertainty for public companies. As a result of these new rules and the size and limited resources of our company, we will incur additional costs associated with our public company reporting requirements, and we may not be able to comply with some of these new rules.  In addition, these new rules could make it more difficult or more costly for us to obtain certain types of insurance, including director and officer liability insurance, and this could make it difficult for us to attract and retain qualified persons to serve on our board of directors.
 
We are presently evaluating and monitoring developments with respect to new and proposed rules and cannot predict or estimate the amount of the additional costs we may incur or the timing of such costs. These new or changed laws, regulations, and standards are subject to varying interpretations, in many cases due to their lack of specificity, and as a result, their application in practice may evolve over time as new guidance is provided by regulatory and governing bodies. This could result in continuing uncertainty regarding compliance matters and higher costs necessitated by ongoing revisions to disclosure and governance practices.
 
We are committed to maintaining high standards of corporate governance and public disclosure. As a result, we intend to invest resources to comply with evolving laws, regulations, and standards, and this investment may result in increased general and administrative expenses and a diversion of management time and attention from revenue-generating activities to compliance activities. If our efforts to comply with new or changed laws, regulations, and standards differ from the activities intended by regulatory or governing bodies due to ambiguities related to practice, regulatory authorities may initiate legal proceedings against us and our business may be harmed.
 
The time and cost associated with complying with government regulations to which we could become subject could have a material adverse effect on our business.
 
Some of the applications for our Liquidmetal alloys that we have identified or may identify in the future may be subject to government regulations. For example, any medical devices made from our alloys likely will be subject to extensive government regulation in the United States by the Food and Drug Administration (“FDA”). Any medical device manufacturers to whom we sell Liquidmetal alloy products may need to comply with FDA requirements, including premarket approval or clearance under Section 510(k) of the Food Drug and Cosmetic Act before marketing Liquidmetal alloy medical device products in the United States. These medical device manufacturers may be required to obtain similar approvals before marketing these medical devices in foreign countries. Any medical device manufacturers with which we jointly develop and sell medical device products may not provide significant assistance to us in obtaining required regulatory approvals. The process of obtaining and maintaining required FDA and foreign regulatory approvals could be lengthy, expensive, and uncertain. Additionally, regulatory agencies can delay or prevent product introductions. The failure to comply with applicable regulatory requirements can result in substantial fines, civil and criminal penalties, stop sale orders, loss or denial of approvals, recalls of products, and product seizures.
 
In addition, the processing of beryllium, a minor constituent element of some of our alloys, can result in the release of beryllium into the workplace and the environment and in the creation of beryllium oxide as a by-product. Beryllium is classified as a hazardous air pollutant, a toxic substance, a hazardous substance, and a probable human carcinogen under environmental, safety, and health laws, and various acute and chronic health effects may result from exposure to beryllium. We are required to comply with certain regulatory requirements and to obtain a permit from the U.S. Environmental Protection Agency or other government agencies to process beryllium. Our failure to comply with present or future governmental regulations related to the processing of beryllium could result in suspension of manufacturing operations and substantial fines or criminal penalties.
 
To the extent that our products have the potential for dual use, such as military and non-military applications, they may be subject to import and export restrictions of the U.S. government, as well as other countries. The process of obtaining any required U.S. or foreign licenses or approvals could be time-consuming, costly, and uncertain. Failure to comply with import and export regulatory requirements can lead to substantial fines, civil and criminal penalties, and the loss of government contracting and export privileges.
 
 
The existence of minority stockholders in our Liquidmetal Golf subsidiary creates potential for conflicts of interest.
 
We directly own 79% of the outstanding capital stock of Liquidmetal Golf, our subsidiary that has the exclusive right to commercialize our technology in the golf market.  The remaining 21% of the Liquidmetal Golf stock is owned by approximately 95 stockholders of record. As a result, conflicts of interest may develop between us and the minority stockholders of Liquidmetal Golf. To the extent that our officers and directors are also officers or directors of Liquidmetal Golf, matters may arise that place the fiduciary duties of these individuals in conflicting positions.
 
Our executive officers, directors and insiders and entities affiliated with them hold a significant percentage of our common stock, and these shareholders may take actions that may be adverse to your interests.
 
As of December 31, 2012, our executive officers, directors and insiders and entities affiliated with them will, in the aggregate, beneficially own approximately 36% of our common stock and 63% of our preferred stock. As a result, these shareholders, acting together, will be able to significantly influence all matters requiring shareholder approval, including the election and removal of directors and approval of significant corporate transactions such as mergers, consolidations and sales of assets. They also could dictate the management of our business and affairs. This concentration of ownership could have the effect of delaying, deferring or preventing a change in control or impeding a merger or consolidation, takeover or other business combination, which could cause the market price of our common stock to fall or prevent you from receiving a premium in such a transaction.
 
Our stock price has experienced volatility and may continue to experience volatility.
 
During 2012, the highest bid price for our common stock was $0.63 per share, while the lowest bid price during that period was $0.10 per share.  The trading price of our common stock could continue to fluctuate widely due to:
 
 
limited current liquidity and the possible need to raise additional capital;
 
 
quarter-to-quarter variations in results of operations;
 
 
announcements of technological innovations by us or our potential competitors;
 
 
changes in or our failure to meet the expectations of securities analysts;
 
 
new products offered by us or our competitors;
 
 
announcements of strategic relationships or strategic partnerships;
 
 
future sales of common stock, or securities convertible into or exercisable for common stock;
 
 
adverse judgments or settlements obligating us to pay damages;
 
 
future issuances of common stock in connection with acquisitions or other transactions;
 
 
acts of war, terrorism, or natural disasters;
 
 
industry, domestic and international market and economic conditions, including the global macroeconomic downturn over the last three years and related sovereign debt issues in certain parts of the world;
 
 
low trading volume in our stock;
 
 
developments relating to patents or property rights;
 
 
government regulatory changes; or
 
 
other events or factors that may be beyond our control.
 
 
In addition, the securities markets in general have experienced extreme price and trading volume volatility in the past. The trading prices of securities of many companies at our stage of growth have fluctuated broadly, often for reasons unrelated to the operating performance of the specific companies. These general market and industry factors may adversely affect the trading price of our common stock, regardless of our actual operating performance.  If our stock price is volatile, we could face securities class action litigation, which could result in substantial costs and a diversion of management’s attention and resources and could cause our stock price to fall.
 
Future sales of our common stock could depress our stock price.
 
Sales of a large number of shares of our common stock, or the availability of a large number of shares for sale, could adversely affect the market price of our common stock and could impair our ability to raise funds in additional stock offerings. In the event that we propose to register additional shares of common stock under the Securities Act of 1933 for our own account, certain shareholders are entitled to receive notice of that registration and to include their shares in the registration, subject to limitations described in the agreements granting these rights.
 
We have never paid dividends on our common stock, and we do not anticipate paying any cash dividends in the foreseeable future.
 
We have paid no cash dividends on our common stock to date. We currently intend to retain our future earnings, if any, to fund the development and growth of our businesses, and we do not anticipate paying any cash dividends on our capital stock for the foreseeable future. In addition, the terms of existing or any future debts may preclude us from paying dividends on our stock. As a result, capital appreciation, if any, of our common stock will be the sole source of gain for the foreseeable future for our common stockholders.
 
Antitakeover provisions of our certificate of incorporation and bylaws and provisions of applicable corporate law could delay or prevent a change of control that you may favor.
 
Provisions in our certificate of incorporation, our bylaws, and Delaware law could make it more difficult for a third party to acquire us, even if doing so would be beneficial to our stockholders. These provisions could discourage potential takeover attempts and could adversely affect the market price of our shares. Because of these provisions, you might not be able to receive a premium on your investment. These provisions:
 
 
authorize our board of directors, without stockholder approval, to issue up to 10,000,000 shares of “blank check” preferred stock that could be issued by our board of directors to increase the number of outstanding shares and prevent a takeover attempt;
 
 
limit stockholders’ ability to call a special meeting of our stockholders; and
 
 
establish advance notice requirements to nominate directors for election to our board of directors or to propose matters that can be acted on by stockholders at stockholder meetings.
 
The provisions described above, as well as other provisions in our certificate of incorporation, our bylaws, and Delaware law could delay or make more difficult transactions involving a change in control of us or our management.
 
Item 1B. Unresolved Staff Comments

None.

Item 2. Properties

Our principal executive office and principal research and development offices are located in Rancho Santa Margarita, California and consist of approximately 15,000 square feet. We occupy this facility pursuant to a lease agreement that expires in April 2016.  We currently expect that the foregoing facility will meet our anticipated research, warehousing, and administrative needs for the foreseeable future.
 
Item 3. Legal Proceedings

The Company has no material legal proceedings currently pending.
 
 
PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Our common stock is currently quoted on the OTC Bulletin Board under the symbol “LQMT.”  On February 20, 2013, the last reported sales price of our common stock was $0.09 per share.  As of February 20, 2013, we had 216 active record holders of our common stock.

The following table sets forth, on a per share basis, the range of high and low bid information for the shares of our common stock for each full quarterly period within the two most recent fiscal years and any subsequent interim period for which financial statements are included, as reported by the OTC Bulletin Board.  These quotations reflect inter-dealer prices, without retail mark-up, mark-down or commission and may not necessarily represent actual transactions.

2012
 
High
   
Low
 
Fourth Quarter
  $ 0.19     $ 0.10  
Third Quarter
  $ 0.33     $ 0.18  
Second Quarter
  $ 0.63     $ 0.15  
First Quarter
  $ 0.35     $ 0.12  
 
2011
 
High
   
Low
 
Fourth Quarter
  $ 0.23     $ 0.12  
Third Quarter
  $ 0.51     $ 0.17  
Second Quarter
  $ 0.63     $ 0.41  
First Quarter
  $ 0.84     $ 0.42  

We have never paid a cash dividend on our common stock. We do not anticipate paying any cash dividends on our common stock in the foreseeable future, and we plan to retain our earnings to finance our operations and future growth.

Securities Authorized for Issuance Under Equity Compensation Plans

For information regarding the securities authorized for issuance under our equity compensation plans, please see Item 12 of Part III of this Annual Report on Form 10-K.
 
 
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

This management’s discussion and analysis should be read in the conjunction with the consolidated financial statements and notes included elsewhere in this report on Form 10-K.

This management’s discussion and analysis, as well as other sections of this report on Form 10-K, may contain “forward-looking statements” that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, estimates, forecasts, assumptions or projections. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believe,” “estimate,” “ project,” “expect,” “intend,” “may,” “anticipate,” “plan,” “seek,” and similar expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to, the matters discussed under the caption “Risk Factors” in Item 1A of this report and other risks and uncertainties discussed in filings made with the Securities and Exchange Commission (including risks described in subsequent reports on Form 10-Q, Form 10-K, Form 8-K, and other filings). Liquidmetal Technologies, Inc. disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.

OVERVIEW

We are a materials technology company that develops and commercializes products made from amorphous alloys.  Our Liquidmetal® family of alloys consists of a variety of proprietary bulk alloys and composites that utilize the advantages offered by amorphous alloy technology. We design, develop and sell products and components from bulk amorphous alloys to customers in various industries.  We also partner with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products. We believe that our proprietary bulk alloys are the only commercially viable bulk amorphous alloys currently available in the marketplace.
 
Amorphous alloys are in general unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structure that forms in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that we believe will make them preferable to other materials in a variety of applications. The amorphous atomic structure of our alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, our zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. We believe these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a wide variety of applications. Moreover, we believe these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.
 
Our revenues are derived from i) selling our bulk Liquidmetal alloy products, which include non-consumer electronic devices, medical products, automotive components, and sports and leisure goods; ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development;  iii) product licensing and royalty revenue, and iv) research and development revenue.  We expect that these sources of revenue will continue to significantly change the character of our revenue mix.
 
Our cost of sales consists primarily of the costs of outsourcing our manufacturing to third parties. Selling, general, and administrative expenses currently consist primarily of salaries and related benefits, travel, consulting and professional fees, depreciation and amortization, insurance, office and administrative expenses, and other expenses related to our operations.
 
Research and development expenses represent salaries, related benefits expense, depreciation of research equipment, consulting and contract services, expenses incurred for the design and testing of new processing methods, expenses for the development of sample and prototype products, and other expenses related to the research and development of Liquidmetal bulk alloys. Costs associated with research and development activities are expensed as incurred. We plan to enhance our competitive position by improving our existing technologies and developing advances in amorphous alloy technologies. We believe that our research and development efforts will focus on the discovery of new alloy compositions, the development of improved processing technology, and the identification of new applications for our alloys.
 
Change in Value of Warrants consists of changes to the fair value of warrants outstanding at each period.  The warrants have been accounted for as a liability as well as equity in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 815-10, Derivatives and Hedging, and FASB ASC 815-40, Contracts in Entity’s Own Equity, due to their price-based anti-dilution rights, with the change in fair values reported in earnings. The fair values are determined using a Black-Scholes pricing model and fluctuations in our stock price have had the greatest impact on the valuation of outstanding warrants.
 
 
SIGNIFICANT TRANSACTIONS
 
July 2012 Private Placement
 
On July 2, 2012, we entered into a private placement transaction (the “July 2012 Private Placement”) for $12 million in principal amount of senior convertible notes due on September 1, 2013.  The notes are convertible at any time at the option of the holders into shares of our common stock at a conversion price of $0.352 per share.  In the event that we issue or sell shares of our common stock for a price per share that is less than the conversion price then in effect, the conversion price then in effect will be decreased to such lower price, subject to customary exceptions.  The notes bear interest at 8% per annum and are payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012.  Each monthly installment payment may be made in cash, shares of our common stock, or a combination thereof.  If paid in shares, such shares will be valued at the lower of (i) the then applicable conversion price or (ii) a price that is 87.5% of the arithmetic average of the ten (or in some cases fewer) lowest weighted average prices of our common stock during the twenty trading day period ending on the payment date or the date on which we elect to pay in shares, whichever is lower (the “Measurement Period”).  Our ability to make such payments with shares of our common stock will be subject to certain conditions, including (i) a minimum of $250,000 in average daily trading volume during the Measurement Period, (ii) a minimum of $150,000 in daily trading volume during each day during the Measurement Period, with certain exceptions, and (iii) the effectiveness of a resale registration statement with respect to the shares.  As of December 31, 2012, we issued 50,171,418 shares of common stock in satisfaction of five monthly installments that were due during 2012 under the July 2012 Private Placement.

As a part of the July 2012 Private Placement, we issued warrants to purchase 18,750,000 shares of our common stock at an exercise price of $0.384 per share, and such warrants first became exercisable within six months of the issuance date thereof.  In the event that we issue or sell shares of our common stock for a price per share that is less than the exercise price then in effect, the exercise price of the warrants will be reduced based on a weighted-average formula. In addition, on the two year anniversary of the issuance date, the then applicable exercise price may be reset to equal the lesser of (i) the then current exercise price or (ii) 87.5% of the arithmetic average of the ten lowest weighted average prices of the common stock during the twenty trading day period ending two trading days immediately preceding the reset date.  All of the warrants will expire on July 2, 2017.
 
June 2012 Visser MTA Agreement

On June 1, 2012, we entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

Under the manufacturing and service component of the Visser MTA Agreement, we have agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions.  Further, we have agreed to sublicense to Visser, on a fully-paid up, royalty-free, irrevocable, perpetual, worldwide basis, all intellectual property rights held by us.  In addition, Visser has a right of first refusal over any proposed transfer of our technology pursuant to any license, sublicense, sale or other transfer, other than a license to a machine or alloy vendor.

Under the financing component of the Visser MTA Agreement, we issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3.0 million , (ii) warrants to purchase 15,000,000 shares of common stock at an exercise price of $0.22 per share which expire on June 1, 2017 and (iii) a secured convertible promissory note (the “Promissory Note”) in the aggregate principal amount of up to $2.0 million which was convertible into shares of common stock at a conversion rate of $0.22 per share.  The Promissory Note was issued pursuant to a $2.0 million loan facility made available by Visser, but no borrowings were made by us under this loan facility, as the deadline for making borrowings under the facility expired on November 15, 2012. All of the shares of common stock issuable upon exercise of the warrants is subject to a lock-up period through December 31, 2016.

On January 17, 2012, February 27, 2012, March 28, 2012 and April 25, 2012, we issued 8% unsecured, bridge promissory notes to Visser that were due upon demand in the amount of $200,000, $200,000, $350,000 and $300,000, respectively.  The aggregate principal amount of $1,050,000 and accrued interest under the bridge promissory notes were all paid off on June 1, 2012 by utilizing a portion of the proceeds received under the financing component of the Visser MTA Agreement.

Apple License Transaction

On August 5, 2010, we entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) we contributed substantially all of our intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to us a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use.  Additionally, in connection with the license transaction, Apple required us to complete a statement of work related to the exchange of Liquidmetal intellectual property information.  We recognized a portion of the one-time license fee upon receipt of the initial payment and completion of the foregoing requirements under the license transaction.  The remaining portion of the one-time license fee was recognized at the completion of the required statement of work.
 
 
Under the agreements relating to the license transaction with Apple, we are obligated to contribute all intellectual property that we developed through February 2012 (which was subsequently amended to extend through February 2014) to CIP. We are also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

Other License Transactions

On January 31, 2012, we entered into a Supply and License Agreement with Engel Austria Gmbh (“Engel”) for a five year term whereby we granted Engel a non-exclusive license to manufacture and sell injection molding machines to our licensees.

On November 16, 2011, we entered into a Development Agreement with Materion Brush Inc. (“Materion”) to evaluate, analyze and develop amorphous alloy feedstock to be supplied in commercial quantities.  Further, on June 17, 2012, we entered into a Sales Representation Agreement with Materion whereby Materion shall promote the sale of our products for certain commissions.  This agreement is for a two year initial term with annual, automatic renewals.

Our Liquidmetal Golf subsidiary has the exclusive right and license to utilize our Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf.  This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf.  We own 79% of the outstanding common stock in Liquidmetal Golf.

In June 2003, we entered into an exclusive license agreement with LLPG, Inc. (“LLPG”).  Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  We, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG.  The exclusive license agreement with LLPG expires on December 31, 2021.

In March 2009, we entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a perpetual non-exclusive license to our technology to produce and market watches and certain other luxury products.  In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches, and our license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. We will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch.  The license agreement with Swatch will expire on the expiration date of the last licensed patent.
 
 
RESULTS OF OPERATIONS

Comparison of the years ended December 31, 2012 and 2011
 
   
For the years
ended December 31,
 
   
2012
         
2011
       
   
in 000's
   
% of Revenue
   
in 000's
   
% of Revenue
 
                         
                         
Revenue:
                       
Products
  $ 591           $ 572        
Licensing and royalties
    59             400        
Total revenue
    650             972        
                             
Cost of revenue
    354       54 %     373       38 %
Gross margin
    296       46 %     599       62 %
                                 
Selling, marketing, general and administrative
    4,850       746 %     4,243       437 %
Research and development
    943       145 %     1,120       115 %
Manufacturing contract costs
    6,300       969 %     -       -  
Settlement expense
    -       -       1,713       176 %
Total operating expense
    12,093               7,076          
                                 
Operating loss
    (11,797 )             (6,477 )        
                                 
Change in value of warrants, gain
    6,547               1,328          
Change in value of embedded conversion feature liability, gain
    4,931               -          
Debt discount amortization expense
    (11,949 )             -          
Financing costs
    (1,355 )             -          
Other income
    34               26          
Interest expense
    (459 )             (90 )        
Interest income
    23               22          
Gain on disposal of subsidiary, net
    -               12,109          
Loss from operations of discontinued operations, net
    -               (763 )        
                                 
Net income (loss)
  $ (14,025 )           $ 6,155          
 
In discussing our results of our operations, we have categorized the specific items of our statements of operations into various categories to facilitate the understanding of our core business operations.  Explanations of each category as well as analyses of specific items contained in that category are discussed below:

Operating revenue and expenses

Operating revenue and expenses category of statements of operations items represent those items that pertain to our core operations in the bulk alloy manufacturing and licensing business as follows:

Revenue. Our revenues are segregated into two types representing i) Products which contain revenues related to our bulk alloy manufacturing business and ii) Licensing and royalties which contain revenues related to our bulk alloy licensing business.

Total revenue decreased by $322 thousand to $650 thousand for the year ended December 31, 2012 from $972 thousand for the year ended December 31, 2011.  The decrease is primarily attributable to a one-time license fee from Swatch in the amount of $381 thousand that was recognized in 2011.  This decrease was slightly offset by an increase in our Products revenue from prototype and other revenue from our manufacturing business in 2012.

Cost of revenue, products.  Cost of revenue was $354 thousand, or 54% of total revenue, for the year ended December 31, 2012 from $373 thousand, or 38% of total revenue, for the year ended December 31, 2011. The cost to manufacture parts from our bulk alloys manufacturing business is variable and differs based on the unique design of each product. In addition, much of our current product mix consists of prototype parts and other revenue which have variable cost percentages relative to revenue. As we begin increasing our revenues with shipments of routine, commercial parts through our third party contract manufacturer, we expect our cost of revenue percentages to stabilize and be more predictable.
 
Gross margin.  Our gross margin decreased by $303 thousand from $599 thousand as of December 31, 2011 to $296 thousand as of December 31, 2012.  Our gross margin percentage decreased from 62% as of December 31, 2011 to 46% as of December 31, 2012.  These decreases are primarily the result of the $381 thousand one-time Swatch license recognized in 2011.
 
 
In order to evaluate our margins more thoroughly, we must look to revenue and costs related to our products category of revenue.   So excluding Licensing and royalties revenue in our gross margin calculation, the gross margin for our Products category of revenue is $237 thousand or 40% for the year ended December 31, 2012 and $199 thousand or 35% for the year ended December 31, 2011.
 
Selling, marketing, general, and administrative expenses. Selling, marketing, general, and administrative expenses increased by $607 thousand to $4.9 million, or 746% of revenue, for the year ended December 31, 2012 from $4.2 million, or 437% of revenue, for the year ended December 31, 2011.  The increase from the prior year was mainly due to additional payroll and recruiting expenses for new hires including an Executive Vice President of Business Development and Operations and a Sales Engineer to facilitate the adoption of our technology.  We also paid board fees for 2011 and 2012 in fiscal year 2012.  We expect to invest further in our selling efforts by expanding our marketing and sales programs, as well as adding new headcount in our sales department.
 
Research and Development Expenses. Research and development expenses decreased by $177 thousand to $943 thousand, or 145% of revenue, for the year ended December 31, 2012, from $1.1 million, or 115% of revenue, for the year ended December 31, 2011.  We spent less in production supplies and consulting services resulting in the decrease in this expense category, but we continue to perform research and development of new Liquidmetal alloys and related processing capabilities, develop new manufacturing techniques, and contract with consultants to advance the development of Liquidmetal alloys.  We have hired a new Vice President of Engineering at the end of 2012, and we expect to invest further in our research and development efforts to facilitate the adoption of our technology.
 
Manufacturing contract costs.  Manufacturing contract costs consist of a one-time $6.3 million non-cash expense for the year ended December 31, 2012 related to the discount pricing that Visser received under the Visser MTA Agreement. The $6.3 million was determined by taking the $0.21 difference between our weighted average $0.31 stock price at the time of issuances of our common stock and the $0.10 per share actual purchase price, multiplied by the 30,000,000 shares issued to Visser.

Settlement expense.  Settlement expense consists of a one-time expense of $1.7 million for the year ended December 31, 2011, in satisfaction of a legal settlement with SAGA.  We did not incur any settlement expense for the year ended December 31, 2012.

Operating loss.  Operating loss increased by $5.3 million from $6.5 million for the year ended December 31, 2011 to $11.8 million for the year ended December 31, 2012.  Excluding the one-time manufacturing contract costs and settlement expense, Operating loss increased by $733 thousand from a loss of $4.8 million for the year ended December 31, 2011 to a loss of $5.5 million for the year ended December 31, 2012.  As discussed above, the increase in our operating loss, excluding one-time expenses, is primarily related to a decrease in Total revenue and an increase in operating expense categories from 201l to 2012.
 
We continue to invest in our technology infrastructure to expedite the adoption of our technology, but we have experienced long sales lead times for customer adoption of our technology.  Until that time where we can either i) increase our revenues with shipments of routine, commercial parts through our third party contract manufacturer or ii) obtain significant licensing revenues, we expect to have operating losses for the foreseeable future.

Non-operational expenses

Our income statement contains various, significant items that are non-operational in nature.  These categories of expenses may have significant gains and losses based on the volatility of our stock price as follows:

Change in value of warrants, gain.  The change in value of warrants was a non-cash gain of $6.5 million, for the year ended December 31, 2012, which resulted from periodic valuation adjustments for warrants issued in connection with the Visser MTA Agreement and the July 2012 Private Placement. The significant increase during the year ended December 31, 2012 compared to the gain of $1.3 million during the year ended December 31, 2011 was primarily due to the decrease in our stock price during the second half of 2012 from $0.32 as of June 30, 2012 to $0.10 as of December 31, 2012.  Changes in the value of our warrants are non-cash and do not affect the operations of our business.
 
 
Change in value of embedded conversion feature liability, gain. Change in value of embedded conversion feature liability was a non-cash gain of $4.9 million for the year ended December 31, 2012. The change in value of embedded conversion feature liability is mainly due to changes in our stock price, similar to the foregoing fluctuation in the change in value of warrants, associated with the valuation of our embedded conversion feature liability related to convertible note under the July 2012 Private Placement (see “--Significant Transactions").

Financing costs.  Financing costs consist of $1.4 million of non-cash expense for the year ended December 31, 2012, related to the booking of our warrant liability for the issuance of 15,000,000 warrants to Visser at an exercise price of $0.22 per share under the Visser MTA Agreement (see “--Significant Transactions”).

Other income.  Other income was $34 thousand for the year ended December 31, 2012, and $26 thousand for the year ended December 31, 2011. Other income is primarily due to gains on settlements on accounts payable for less than face value.

Debt discount amortization expense. Debt discount amortization expense was $11.9 million of non-cash expense for the year ended December 31, 2012. Debt discount amortization expense primarily relates to the amortization of $12 million of original debt discount over the term of the senior convertible notes issued as part of the July 2012 Private Placement along with its issuance costs. The amount includes amortization of debt discount of $7.4 million under the effective interest method and a one-time amortization of debt discount of $1.9 million for the year ended December 31, 2012.

Interest expense. Interest expense was $459 thousand for the year ended December 31, 2012 and was $90 thousand for the year ended December 31, 2011. Interest expense for the year ended December 31, 2012 consists of the 8% interest related to the senior convertible notes issued as part of the July 2012 Private Placement. Interest expense for the year ended December 31, 2011 primarily consisted of interest accrued on the $1.7 million SAGA promissory note.
 
Interest income. Interest income was $23 thousand and $22 thousand for the year ended December 31, 2012 and 2011, respectively, from interest earned on cash deposits.

Gain on disposal of subsidiaries.  Gain on disposal of subsidiaries of $12.1 million for the year ended December 31, 2011 was due to the sale of Advanced Metals Materials (“AMM”), our China subsidiary, the sale of Liquidmetal Technologies, Korea (“LMTK”), our Korea subsidiary, and the divestment of Liquidmetal Coatings (“LMC”), our Coatings subsidiary.  The gain on disposal was mainly attributed to the write-off of net liabilities of $10.7 million related to LMC upon deconsolidation and $2.9 million net write-off of investments in AMM and LMC and foreign exchange translation related to LMTK offset by a $1.4 million of loss from write-off of investment and net assets in LMTK. Our gains on disposals of our subsidiaries were mainly the result of write-offs of assets and liability accounts and are non-cash in nature.

Loss from discontinued operations. Loss from discontinued operations of $763 thousand for the year ended December 31, 2011 consisted of the losses from operations of our discontinued subsidiaries. Our discontinued subsidiaries were either sold or de-consolidated as of December 31, 2011.

Net income (loss).  Due to the significant impact of our non-recurring, non-cash and non-operating expenses discussed above, our net loss of $14.0 million as of December 31, 2012 and net income of $6.2 million as of December 31, 2011 are reflective of significant fluctuations that are unrelated to the operations of our bulk alloy business.  Our “Operating loss, excluding non-recurring expenses” should be reviewed in conjunction with our net income (loss) for a more thorough review of our core business operations.

LIQUIDITY AND CAPITAL RESOURCES

Our cash used in continuing operations was $5.2 million for the year ended December 31, 2012, while cash used in continuing operations was $5.1 million for the year ended December 31, 2011.  Our cash used in investing activities was $86 thousand for the year ended December 31, 2012 primarily from purchase of property and equipment. Our cash provided by financing activities of continuing operations was $12.3 million for the year ended December 31, 2012 primarily from convertible debt issuance.  As of December 31, 2012, our cash balance was $7.2 million.
 
On July 2, 2012, we entered into definitive agreements relating to a private placement of $12.0 million in principal amount of Senior Convertible Notes due on September 1, 2013 and Warrants to the purchasers of such Convertible Notes giving such purchasers the right to purchase up to an aggregate of 18,750,000 shares of our common stock at an exercise price of $0.384 per share.  At December 31, 2012, the outstanding principal and accrued but unpaid interest under the Convertible Notes was $7.0 million.

We anticipate that our current capital resources, together with income from operations, will be sufficient to fund our operations through the end of 2013.  We have a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale.  Furthermore, Visser’s ability to produce our products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of our control, including the nature and design of the component, the customer’s specifications, and required delivery timelines.  Such factors will likely require that we raise additional funds to support our operations beyond 2013.  There is no assurance that we will be able to raise such additional funds on acceptable terms, if at all.  If we raise additional funds by issuing securities, existing stockholders may be diluted.  If funding is insufficient at any time in the future, we may be required to alter or reduce the scope of our operations or to cease our operations entirely.  As a result of these and other factors, our independent registered public accounting firm has indicated, in their audit opinion on our 2012 consolidated financial statements, that there is substantial doubt about our ability to continue as a going concern.
 
 
OFF-BALANCE SHEET ARRANGEMENTS

An off-balance sheet arrangement is any transaction, agreement or other contractual arrangement involving an unconsolidated entity under which a company has (1) made guarantees, (2) a retained or a contingent interest in transferred assets, (3) an obligation under derivative instruments classified as equity, or (4) any obligation arising out of a material variable interest in an unconsolidated entity that provides financing, liquidity, market risk or credit risk support to our company, or that engages in leasing, hedging, or research and development arrangements with our company.  As of December 31, 2012, the Company did not have any off-balance sheet arrangements.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and assumptions that affect reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. These estimates and assumptions are based on historical experience and various other factors that are believed to be reasonable under the circumstances. Actual results could differ materially from these estimates under different assumptions or conditions.

We believe that the following accounting policies are the most critical to our consolidated financial statements since these policies require significant judgment or involve complex estimates that are important to the portrayal of our financial condition and operating results:

 
We recognize revenue pursuant to applicable accounting standards including FASB ASC Topic 605 (“ASC 605”), Revenue Recognition. ASC 605 summarize certain points of the SEC staff’s views in applying generally accepted accounting principles to revenue recognition in financial statements and provide guidance on revenue recognition issues in the absence of authoritative literature addressing a specific arrangement or a specific industry.

Our revenue recognition policy complies with the requirements of ASC 605.  Revenue is recognized when i) persuasive evidence of an arrangement exists, ii) delivery has occurred, iii) the sales price is fixed or determinable, iv) collection is probable and v) all obligations have been substantially performed pursuant to the terms of the arrangement. Revenues primarily consist of the sales and prototyping of Liquidmetal mold and bulk alloys, licensing and royalties for the use of the Liquidmetal brand and bulk Liquidmetal alloys.  Revenue is deferred and included in liabilities when the Company receives cash in advance for goods not yet delivered or if the licensing term has not begun.

License revenue arrangements in general provide for the grant of certain intellectual property rights for patented technologies owned or controlled by the Company. These rights typically include the grant of an exclusive or non-exclusive right to manufacture and/or sell products covered by patented technologies owned or controlled by us.  The intellectual property rights granted may be perpetual in nature, extending until the expiration of the related patents, or can be granted for a defined period of time.

Licensing revenues that are one time fees upon the granting of the license are recognized when i) the license term begins in a manner consistent with the nature of the transaction and the earnings process, ii) when collectability is reasonably assured or upon receipt of an upfront fee, and iii) when all other revenue recognition criteria have been met.  Pursuant to the terms of these agreements, we have no further obligation with respect to the grant of the license.   Licensing revenues that are related to royalties are recognized as the royalties are earned over the related period.

 
We value our long-lived assets at lower of cost or fair market value.  Management reviews long-lived assets to be held and used in operations for impairment whenever events or changes in circumstances indicate that the carrying value of an asset may be impaired. An impairment loss is recognized when the estimated fair value of the assets is less than the carrying value of the assets.  There were no impairment losses during the years ended December 31, 2012 and 2011.
 
 
 
We record valuation allowances to reduce our deferred tax assets to the amounts estimated to be realized. While we consider taxable income in assessing the need for a valuation allowance, in the event we determine we would be able to realize our deferred tax assets in the future in excess of the net recorded amount, an adjustment would be made and income increased in the period of such determination. Likewise, in the event we determine we would not be able to realize all or part of our deferred tax assets in the future, an adjustment would be made and charged to income in the period of such determination.

 
We account for our outstanding warrants and the embedded conversion feature of our senior convertible notes as derivatives in accordance with FASB ASC 815-10, Derivatives and Hedging, and FASB ASC 815-40, Contracts in Entity’s Own Equity.  Fair values of warrants and embedded conversion features are measured at each period end using Black-Scholes and Monte Carlo Simulation pricing models and changes in fair value during the period are reported in our earnings.

 
We record debt discount based on a valuation that is derived from a combination of the fair value of warrants and embedded conversion features in accordance with FASB ASC 815-10, Derivatives and Hedging, and FASB ASC 815-40, Contracts in Entity’s Own Equity.  Once the original valuation is determined, we utilize the effective interest method to amortize the debt discount over the life of our senior convertible notes.
 
 
We account for share-based compensation in accordance with the fair value recognition provisions of FASB ASC Topic 718, Share-based Payment, which requires all share-based payments to employees, including grants of employee stock options, to be recognized in the consolidated financial statements based on their fair values. The fair value of stock options is calculated by using the Black-Scholes option pricing formula that requires estimates for expected volatility, expected dividends, the risk-free interest rate and the term of the option. If any of the assumptions used in the Black-Scholes model change significantly, share-based compensation expense may differ materially in the future from that recorded in the current period.

RECENT ACCOUNTING PRONOUNCEMENTS

In June 2011, the FASB, issued guidance regarding the presentation of comprehensive income. The new guidance eliminates the current option to report other comprehensive income and its components in the statement of changes in equity. Instead, an entity will be required to present either a continuous statement of net income and other comprehensive income or in two separate but consecutive statements of net income.  The updated guidance is effective on a retrospective basis for financial statements issued for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2011.  Our adoption of this guidance on January 1, 2012 did not have a significant impact on our consolidated financial statements.

In May 2011, the FASB issued additional guidance on fair value measurements that clarifies the application of existing guidance and disclosure requirements, changes certain fair value measurement principles and requires additional disclosures about fair value measurements. The updated guidance is effective on a prospective basis for financial statements issued for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2011.  Our adoption of this guidance on January 1, 2012 did not have a significant impact on our consolidated financial statements.

In April 2010, the FASB codified the consensus reached in Emerging Issues Task Force Issue No. 08-09, “Milestone Method of Revenue Recognition.” FASB ASU No. 2010-17 “Revenue Recognition – Milestone Method (Topic 605)” provides guidance on defining a milestone and determining when it may be appropriate to apply the milestone method of revenue recognition for research and development transactions. FASB ASU No. 2010 – 17 is effective on a prospective basis for milestones achieved after the adoption date. Our adoption of this guidance on January 1, 2011 did not have a significant impact on our consolidated financial statements.

Other recent accounting pronouncements issued by the FASB (including its Emerging Issues Task Force), the AICPA and the SEC did not or are not believed by management to have a material impact on our present or future consolidated financial statements.

Item 8. Financial Statements and Supplementary Data

The financial statements required by this item are located in Consolidated Financial Statements in Item 15 of this report.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosures
 
None.
 
 
Item 9A. Controls and Procedures
 
Evaluation of Disclosure Controls and Procedures.  Under the supervision and with the participation of our management, including our Chief Executive Officer (Principal Executive Officer) and Chief Financial Officer (Principal Financial Officer), we conducted an evaluation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15(d)-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)).  Based on this evaluation, our Chief Executive Officer (Principal Executive Officer) and Chief Financial Officer (Principal Financial Officer) concluded that our disclosure controls and procedures were effective as of December 31, 2012 (the end of the period covered by this report).
 
Changes in Internal Controls. Based on a restatement of our consolidated financial statements disclosed in our 2011 Form 10K, our independent registered public accounting firm had identified a material weakness in the Company’s internal control assessment process in relation to the financial statement impact of issuance and modification of equity instruments as of December 31, 2011.

During 2012, we have changed our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) to mitigate the risk of material misstatements related to the issuance and modification of equity instruments.  We believe that these changes provide the basis of our assessment of internal controls as indicated in our evaluation of internal controls over financial reporting as of December 31, 2012 below.
 
Management’s Report on Internal Control over Financial Reporting.  The company’s management is responsible for establishing and maintaining adequate internal control over financial reporting for the company. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the company’s assets, (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that the company’s receipts and expenditures are being made only in accordance with authorizations of the company’s management and directors, and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

As required by Section 404 of the Sarbanes-Oxley Act of 2002 and the related rule of the SEC, management assessed the effectiveness of the company’s internal control over financial reporting using the Internal Control-Integrated Framework developed by the Committee of Sponsoring Organizations of the Treadway Commission.

Based on this assessment, management concluded that the company’s internal control over financial reporting was effective as of December 31, 2012. Management has not identified any material weaknesses in the company’s internal control over financial reporting as of December 31, 2012.
 
This Annual Report on Form 10-K does not include an attestation report by our registered public accounting firm regarding internal control over financial reporting.  Management’s report was not subject to attestation by our registered public accounting firm pursuant to rules of the SEC that permit us to provide only our management’s report in this Annual Report on Form 10-K.
 
Item 9B. Other Information
 
None.
 
 
PART III

Item 10. Directors, Executive Officers and Corporate Governance

Set forth below is a table identifying our directors and executive officers as of February 26, 2013:

Name
Age
Position
     
Thomas Steipp
63
President, Chief Executive Office and Director
     
Tony Chung
43
Chief Financial Officer
     
Ricardo Salas
49
Executive Vice-President and Director
     
Bruce Bromage
59
Executive Vice-President of Business Development and Operations
     
Abdi Mahamedi
50
Chairman of the Board
     
Mark Hansen
58
Director
     
Scott Gillis
59
Director
     
Bob Howard-Anderson
56
Director
 
Thomas Steipp was elected by our board of directors to serve as our President and Chief Executive Officer in August 2010 and was also elected to our board of directors in August 2010.  Mr. Steipp previously served in various roles at Symmetricom, Inc., a publicly traded provider of products for communications infrastructure and systems.  Mr. Steipp served as Symmetricom’s Chief Executive Officer from December 1998 to June 2009, Chief Financial Officer from December 1998 to October 1999, and President and Chief Operating Officer of Telecom Solutions, a division of Symmetricom, from March 1998 to December 1998.  Mr. Steipp also served on Symmetricom’s Board of Directors from 1998 to 2009.  During his employment with Symmetricom, Mr. Steipp worked to transform the company from a technology holding company into a telecommunications hardware focused company, served as the company’s spokesman in working with investors, implemented a new business model, worked to reduce operating expenses, and led acquisition activities.  Mr. Steipp has also served on the board of directors of Alpha and Omega Semiconductors Limited, a publicly traded designer, developer and global supplier of a broad range of power semiconductors, since November 2006.  Mr. Steipp received his B.S. in electrical engineering from the Air Force Academy and M.S. in industrial administration from Purdue University.  Our board of directors believes that Mr. Steipp’s experience and background make him a qualified and valuable member of our board of directors.  In particular, Mr. Steipp’s experience and background in working with publicly traded, technology-based industrial products companies, recruiting executives, working with investors, implementing new business models, and leading acquisition activities make him a valuable resource for the Company.

Tony Chung was elected by our board of directors to serve as our Chief Financial Officer in December 2008.  Most recently, Mr. Chung served as Chief Financial Officer at BETEK Corporation, a real estate and investment subsidiary of SK Engineering and Construction from February 2008 to December 2008 and as Chief Financial Officer of Solarcity, a company providing advanced solar technology and installation services, from March 2007 to January 2008.  Mr. Chung’s primary role was to manage the overall financial operations of both companies.  Previously, Mr. Chung was employed by us as our Vice President of Finance from May 2004 to February 2007. Mr. Chung is a Certified Public Accountant and served eight years at KPMG as an Audit and Consulting Manager for several large multinational companies.  He received his B.S. degree in Business Administration from University of California Berkeley’s Haas School of Business in 1992.  Mr. Chung is also an Attorney at Law and received his J. D. degree from Pacific Coast University School of Law in 2006.

Ricardo Salas began serving as our Executive Vice President in December 2008 and began serving on our board of directors in October 2010.  He previously served as our Chief Executive Officer and President from December 2005 through October 2006 and from October 2006 to December 2008, he served as an independent consultant to the Company.  Mr. Salas also served on our board of directors from April 1995 to May 2003.  From January 2000 through June 2005, Mr. Salas served as Chief Executive Officer of iLIANT Corporation, an information technology and outsourcing service firm in the health care industry.  He served as a director of CyberDefender Corporation which provides Internet security technology and remote PC repair services to the consumer and small business market, and MED3000 Group, Inc., a national provider of healthcare management and technology services.  He currently serves as Director of VillageEDOCS, a technology company providing software-as-a-service to financial services, healthcare and various other industries.  Mr. Salas received a B.A. degree in Economics from Harvard College in 1986.  Our board of directors believes that Mr. Salas’ experience and background make him a qualified and valuable member of our board of directors.  In addition to Mr. Salas’s prior experience as our director and executive officer, he has extensive knowledge working with technology-based companies.  His background working with investors, leading acquisition activities and negotiating transactions make him a valuable resource for our Company.
 
 
Bruce Bromage was elected by our board of directors to serve as Executive Vice President of Business Development and Operations in November 2012 after serving as a Strategic Marketing and Operations consultant with the company since June 2012. From April 2002 to August 2010, Dr. Bromage served as Executive Vice President and General Manager of Symmetricom, a publicly traded provider of products for communications infrastructure and systems and was an Officer of the Company. Responsibilities during his eight years with the company included Corporate Strategy, M&A Integration, Information Technology, and General Management of the Timing, Test and Measurement Division and the Technology Realization Center.  Prior to Symmetricom, Dr. Bromage held senior executive positions with two high-technology startups and managed Strategic Business Development with Hewlett Packard. Dr. Bromage received his Ph.D. in Cognitive Psychology from the University of California, Santa Barbara in 1981 and has completed executive programs with the Stanford Graduate School of Business. Our board of directors believes that Dr. Bromage’s experience and background make him a qualified and valuable member of our executive management team.  In particular, his prior experience in start-up companies, developing new technologies and business models and his extensive knowledge in acquisitions and negotiations make him a valuable resource for our Company.

Abdi Mahamedi has served as a director since May 2009 and became Chairman of the Board in March 2010.  Since 1987, Mr. Mahamedi has served as the President and Chief Executive Officer of Carlyle Development Group of Companies (“CDG”), which develops and manages residential and commercial properties in the United States on behalf of investors worldwide.  At CDG, Mr. Mahamedi evaluates and supervises all of the investment activities and management personnel.  Prior to joining CDG, Mr. Mahamedi founded Emanuel Land Company, a subsidiary of Emanuel & Company, a Wall Street investment banking firm, and served as a managing director for Emanuel Land Company from 1986 to 1987.  In 1983, Mr. Mahamedi received his B.S.E. degree in Civil and Structural Engineering from the University of Pennsylvania, and in 1984 he received his M.S.E. degree in Civil and Structural Engineering from the University of Pennsylvania.  Our board of directors believes that Mr. Mahamedi experience and background make him a qualified and valuable member of our board of directors.  In particular, his knowledge in working with global investment companies and leading acquisition activities makes him a valuable resource for our Company.
 
Mark Hansen began serving on our board of directors in February 2011 and has been the chairman of the compensation committee and nominating and corporate governance committee and a member of the audit committee of our board of directors since August 2011.  Mr. Hansen brings thirty plus years of executive management experience serving consumers through retail, foodservice and consumer package goods venues.  Mr. Hansen has been with Cobalt Development Partners, LLC since 2003 and is presently the Managing Partner.  The firm focuses on the development of emerging consumer and intellectual property companies.  From June 1997 to September 1998, Mr. Hansen served as the President and CEO of SAM’s Club, which generated $23 billion in revenue with 75,000 employees and from November 1989 to June 1997, the President and CEO of PETsMART, the country’s largest retailer of pet supplies and services.  Mr. Hansen’s previous and present board of director positions include Applebee’s Restaurants, Amazon.com, Swander Pace Capital, Pet360.com and Arizona State University Business School Dean’s Counsel.  Mr. Hansen received his Bachelor’s Degree in Fine Arts from Roosevelt University in 1976.  Our board of directors believes that Mr. Hansen’s experience and background make him a qualified and valuable member of our board of directors.  In particular, Mr. Hansen’s background working with multi-million dollar corporations and other experience in the service sector including pharmacy, optical, veterinary hospitals and small business service centers make him a valuable resource for the Company.

Scott Gillis currently serves as an operations & systems executive for American International Group, Inc., as Global Head of its SAP Center of Excellence. Before assuming this role in 2012, Mr. Gillis served AIG's Life & Retirement business, SunAmerica Financial Group, as Senior Vice President of Finance, as Treasurer, and as CFO of SunAmerica's retirement services businesses. He has served many years on the boards of a number of SunAmerica companies, including SunAmerica Life Insurance Company, SunAmerica Annuity and Life Assurance Company, First SunAmerica Life Insurance Company, Variable Annuity Life Insurance Company, AIG Advisor Group Inc, SunAmerica Affordable Housing Partners Inc, SunAmerica Investments Inc., SunAmerica Capital Services Inc.  and Western National Life Insurance Company. Mr. Gillis began his career at SunAmerica as Director of Audit.  From 1989 to 1995 he served as Vice President and Controller of the SunAmerica Life Companies. He was promoted to Senior Vice President and Controller in 1996, elected a director in 2000, and then CFO in 2003.  He was elected Vice President of SunAmerica Inc. in 1998, made Controller in 2000, promoted to Senior Vice President in 2001 and named CFO in 2004.  In 2011, he was named a Senior Vice President of SunAmerica Financial Group.  Our board of directors believes that Mr. Gillis’ experience and background make him a qualified and valuable member of our board of directors.  In particular, Mr. Gillis’ background working in multi-million dollar companies in the financial industry and experience in the financial sector make him a valuable resource for the Company.  In addition, our board of directors believes that his 37 years of experience with financial reporting and financial statements, and two decades of experience with SEC filings and financial statements will make him a valuable member of the audit committee of our board of directors.
 
 
Bob Howard-Anderson began serving on our board of directors in February 2013. Since 2002, Mr. Howard-Anderson served as President and CEO of Occam Networks, a leading provider of broadband access solutions, until its acquisition by Calix Inc. in February 2011. Previously, Mr. Howard-Anderson served as Vice President of Product Operations at Procket Networks from 2000 to 2002, where he was responsible for R&D, product management and manufacturing operations. Prior to that, Mr. Howard-Anderson was Vice President of Engineering for Sun Microsystems Inc., responsible for developing and introducing a broad portfolio of products. Prior to Sun Microsystems, he served as Vice President of Engineering at First Pacific Networks as well as Network Equipment Technology. He also held management positions at Bolt Baranek and Newman (BBN) and Octocom Inc. Mr. Howard-Anderson holds a BS in Electrical Engineering and Physics from Tufts University. Our board of directors believes that Mr. Howard-Anderson’s experience and background make him a qualified and valuable member of our board of directors.  In particular, his more than 30 years of experience in the data and telecommunication equipment industries managing large R&D and product development initiatives, as well as his experience managing startup companies to profitability will make him a valuable member of our board of directors.

Term of Office for Directors

Each director serves a term of one-year until the next ensuing annual stockholder meeting or until his successor is duly elected or his earlier resignation or removal.

Director Independence
 
Our board of directors presently has six members. Our board of directors has determined that three of its current members, Mr. Hansen, Mr. Gillis and Mr. Howard-Anderson, are “independent directors” as defined under the rules of the NASDAQ Stock Market, Inc. and Rule 10A-3(b)(i) under the Securities Exchange Act of 1934, as amended.

Audit Committee

Our board of directors maintains a standing Audit Committee.  Mr. Gillis serves as the chairman, and Mr. Hansen and Mr. Howard-Anderson serve as a member of the Audit Committee. Mr. Gillis is an “audit committee financial expert” as defined by the rules of the NASDAQ Stock Market, Inc. and Rule 10A-3(b)(i) under the Securities Exchange Act of 1934 applicable to members of an audit committee.  The Audit Committee is appointed by our board of directors to assist our board of directors in monitoring (1) the integrity of our financial statements, (2) our compliance with legal and regulatory requirements, and (3) the independence and performance of our internal and external auditors.

Section 16(a) Beneficial Ownership Reporting Compliance

Section 16(a) of the Securities Exchange Act of 1934, as amended (the “1934 Act”) requires the Company’s directors and officers, and persons who own more than 10% of a registered class of the Company’s equity securities, to file initial reports of ownership and reports of changes in ownership with the SEC.  Such persons also are required to furnish the Company with copies of all Section 16(a) reports they file.

Based solely on its review of the copies of such reports received by it with respect to fiscal year 2012 or written representations from certain reporting persons, the Company believes that all filing requirements applicable to its directors and officers and persons who own more than 10% of a registered class of the Company’s equity securities have been complied with, on a timely basis, for fiscal year 2012.

Code of Ethics

Our board of directors has adopted a written Code of Ethics for Chief Executive Officer and Senior Financial and Accounting Officers that applies to our Principal Executive Officer, Principal Financial Officer, Principal Accounting Officer or Controller, or persons performing similar functions. In addition, we intend to post on our website, www.liquidmetal.com all disclosures that are required by law concerning any amendments to, or waivers from, any provision of the Code of Ethics for Chief Executive Officer and Senior Financial and Accounting Officers.
 
Item 11.  Executive Compensation

Executive Benefits and Perquisites

Set forth below is information regarding compensation earned by or paid or awarded to the following executive officers of the company during the year ended December 31, 2012: (i) Thomas Steipp, our President and Chief Executive Officer; (ii) Tony Chung, our Chief Financial Officer; and (iii) Rick Salas, our Executive Vice-President.  These persons are hereafter referred to as our “named executive officers.”  The identification of such named executive officers is determined based on the individual’s total compensation for the year ended December 31, 2012, as reported below in the Summary Compensation Table.
 
 
Summary Compensation Table

The following table sets forth for each of the named executive officers: (i) the dollar value of base salary and bonus earned during the years ended December 31, 2012 and 2011; (ii) the aggregate grant date fair value of stock and option awards granted during 2012 and 2011, computed in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) Topic 718 (R); (iii) the dollar value of earnings for services pursuant to awards granted during 2012 and 2011 under non-equity incentive plans; (iv) non-qualified deferred compensation earnings during 2012 and 2011; (v) all other compensation for 2012 and 2011; and, finally, (vi) the dollar value of total compensation for 2012 and 2011.
 
Name and Principal Position
 
Year
 
 
Salary
   
Stock
Awards
   
Option
Awards
   
Total
 
Thomas Steipp,
2012
  $ 300,000       --       --     $ 300,000  
President and Chief Executive Officer
2011
  $ 300,000       --       --     $ 300,000  
                                   
Tony Chung,
2012
  $ 162,000       --       --     $ 162,000  
Chief Financial Officer
2011
  $ 160,000       --       --     $ 160,000  
                                   
Ricardo Salas
2012
  $ 240,000       --       --     $ 240,000  
Executive Vice President
2011
  $ 240,000       --       --     $ 240,000  
 
For a description of the material terms of employment agreements with our named executive officers, see “Employment Agreements” below.

Outstanding Equity Awards at 2012 Fiscal Year-End

The following table sets forth information on outstanding option and stock awards held by the named executive officers at December 31, 2012, including the number of shares underlying both exercisable and unexercisable portions of each stock option as well as the exercise price and expiration date of each outstanding option.
 
   
Option Awards
   
Stock Awards
 
Name
 
Number of
Securities
Underlying
Unexercised
Options
Exercisable
   
Number of
Securities
Underlying
Unexercised
Options 
Unexercisable
 
   
Equity
Incentive
Plan
Awards:
Number of
Securities
Underlying
Unexercised
Unearned
Options
   
Option
Exercise
Price
   
Option
Expiration
Date
   
Number
of Shares
 or Units
of Stock
That
Have Not
Vested
   
Market
Value of
Shares or
Units of
Stock That
Have Not
Vested
 
   
Equity
Incentive Plan
Awards:
Number of
Unearned
Shares, Units
or Other
Rights That
Have Not
Vested
   
Equity
Incentive Plan
Awards:
Market or
Payout Value
of Unearned
Shares, Units
or Other
Rights That
Have Not
Vested
 
Thomas Steipp
    --       --       --       --       --       3,600,000     $ 360,000       --       --  
Tony
    160,000       40,000 (1)     --     $ 0.09    
11/30/2018
      --       --       --       --  
Chung
    100,000       150,000 (2)     --     $ 0.12    
07/11/2020
      --       --       --       --  
Ricardo Salas
    300,000       900,000 (3)     --     $ 0.12    
07/11/2020
      --       --       --       --  
 
 
(1)
The shares underlying this option vest 20% per year starting with the vesting commencement date on December 1 2009 and thereafter.
 
(2)
The shares underlying this option vest 20% per year starting with the vesting commencement date on July 12, 2011 and thereafter.
 
(3)
The shares underlying this option vest 20% per year starting with the vesting commencement date on July 12, 2011 and thereafter.
 
 
Employment Agreements

On August 3, 2010, we entered into employment agreement with Thomas Steipp, our Chief Executive Officer.  Under his employment agreement, Mr. Steipp receives a base salary of $300,000, which may be adjusted upward in the sole discretion of our board of directors on an annual basis.  In addition, Mr. Steipp is entitled to bonuses or additional compensation as may be granted by our board of directors or chairman or our board of directors, in their sole discretion. No discretionary bonus was paid to Mr. Steipp for 2012 or 2011.  The employment agreement provides that we can terminate Mr. Steipp’s employment at any time and for any reason, provided that if his employment is terminated without “Cause” (as specifically defined in the agreement), then he will continue to be entitled to his base salary and health and welfare benefits for a period of twelve months after termination.  In the event that Mr. Steipp terminates his own employment within thirty days after a change in control of the company, we will be obligated to pay him a lump-sum severance payment equal to his base salary for the remainder of the five-year term.  The employment agreement provides that Mr. Steipp will not be entitled to any severance compensation if he voluntarily leaves the employment of the company or is terminated for “Cause.”  In addition, Mr. Steipp was also granted an aggregate of 6,000,000 restricted shares of our common stock, which will vest in increments of 1,200,000 shares on each anniversary of his employment with us.  In the event that Mr. Steipp ceases to be employed by us prior to the fifth anniversary of his employment as a result of (i) death, (ii) termination of by us without “Cause,” or (iii) termination by Mr. Steipp within thirty days of a change in control of our company, any unvested shares will immediately vest.  In the event that Mr. Steipp ceases to be employed by us prior to the fifth anniversary of his employment for any other reason, he will forfeit any unvested shares.

401(k) Savings Plan

We have adopted a tax-qualified employee savings and retirement plan, or 401(k) plan that covers all of our employees. Pursuant to our 401(k) plan, participants may elect to reduce their current compensation, on a pre-tax basis, by up to the statutorily prescribed annual limit, whichever is lower, and have the amount of the reduction contributed to the 401(k) plan. The 401(k) plan permits us, in our sole discretion, to make additional employer contributions to the 401(k) plan. However, we do not currently make employer contributions to the 401(k) plan and may not do so in the future. As such, contributions by employees or by us to the 401(k) plan, and the income earned on plan contributions, are not taxable to employees until withdrawn from the 401(k) plan, and we can deduct our contributions, if any, at the time they are made.

Pension Benefits

We do not sponsor any qualified or non-qualified defined benefit plans.

Nonqualified Deferred Compensation

We do not maintain any non-qualified defined contribution or deferred compensation plans. The compensation committee, which is comprised solely of “outside directors” as defined for purposes of Section 162(m) of the Internal Revenue Code, may elect to provide our officers and other employees with non-qualified defined contribution or deferred compensation benefits if the compensation committee determines that doing so is in our best interests.

Director Compensation

The following table sets forth information regarding the compensation received by each of our non-employee directors serving during the years ended December 31, 2012:
 
Name
 
Year
 
 
Fees
Earned
or
Paid in
Cash ($)
   
Stock
Awards
($)
   
Option
Awards
($)
   
Non-
Equity
Incentive P
lan
Compensa
tion
($)
   
Nonqualified
Deferred
Compensation
Earnings
($)
   
All Other
Compensation
($)
   
Total
($)
 
Abdi Mahamedi
2012
  $ 24,000       --     $ 4,100 (1)     --       --       --     $ 28,100  
Mark Hansen
2012
  $ 99,000       --     $ 18,600 (2)     --       --       --     $ 117,600  
 
 
(1)
Mr. Mahamedi had 20,000 stock option grants outstanding as of December, 31, 2012.
 
(2)
Mr. Hansen had 70,000  stock option grants outstanding as of December 31, 2012.
 
 
 
Our non-employee directors receive certain compensation for their services and are reimbursed for expenses incurred in attending board and committee meetings, as determined by the board of directors.

We have a 2012 Equity Incentive Plan pursuant to which our non-employee directors are entitled to receive stock options.  All options granted under the plan have an exercise price equal to the fair market value of our common stock on the date of the grant.  These stock options have a 10-year term and are exercisable pursuant to an equal 5-year vesting schedule, and remain exercisable for certain periods of time after a person is no longer a director.

No director who is an employee will receive separate compensation for services rendered as a director.  However, our employee directors are eligible to participate in our 2012 Equity Incentive Plan.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The following table sets forth certain information regarding the beneficial ownership of our common stock as of February 20, 2013 by:
 
 
each person known by us to be a beneficial owner of more than 5.0% of our outstanding common stock;
 
each of our directors;
 
each of our named executive officers; and
 
all of our directors and executive officers as a group.

The number and percentage of shares beneficially owned is determined under the rules of the SEC and the information is not necessarily indicative of beneficial ownership for any other purpose. Under such rules, beneficial ownership includes any shares as to which the individual has sole or shared voting power or investment power and also any shares which the individual has the right to acquire beneficial ownership of within 60 days of February 20, 2013 through the exercise of any stock option or other right. Unless otherwise indicated in the footnotes, each person has sole voting and investment power with respect to the shares shown as beneficially owned.
 
A total 255,929,106 shares of our common stock were issued and outstanding as of February 20, 2013.  Unless otherwise indicated, the address of all directors and named executive officers is 30452 Esperanza, Rancho Santa Margarita, California 92688.
 
 
   
Common Stock
   
Series A-1
Preferred Stock
   
Series A-2
Preferred Stock
 
Name of Beneficial Owner
 
Number
of Shares(1)
   
Percent
of Class(1)
   
Number
of Shares(2)
   
Percent
of Class(2)
   
Number
of Shares(3)
   
Percent
of Class(3)
 
                                     
Directors
and Named Executive Officers
                                   
Abdi Mahamedi
    21,629,615 (4)     8.0 %     58,600       55.7 %     260,710       64.9 %
Thomas Steipp
    7,610,893 (5)     3.0 %     -       -       -       -  
Ricardo Salas
    11,128,947 (6)      4.2 %     -       -       -       -  
Mark Hansen
    -       -       -       -       -       -  
Scott Gillis
    11,700 (7)     *       -       -       -       -  
Bob Howard-Anderson
    -       -       -       -       -       -  
Bruce Bromage
    -       -       -       -       -       -  
Tony Chung
    1,080,447 (8)      *       -       -       -       -  
All directors and executive
officers as a group (8 persons)
    41,461,602       14.9 %     58,600       55.7 %     260,710       64.9 %
5% Shareholders
                                               
Carlyle Holdings, LLC
    15,972,782 (9)     6.0 %     48,600       46.2 %     144,495       36.0 %
2700 Westchester Ave., Ste. 303
                                               
Purchase, NY 10577
                                               
Jack Chitayat
    15,387,268 (10)     5.8 %     -       -       -       -  
1836 Camino Del Teatro
                                               
La Jolla, CA 92037
                                               
Silver Lake Group, LLC
    3,501,130 (11)     1.3 %     -       -       -       -  
64 Ritz Cove Drive
                                               
Monarch Beach, CA 92629
                                               
Atlantic Realty Group
    6,228,087 (12)     2.5 %     -       -       -       -  
1836 Camino Del Teatro
                                               
La Jolla, CA 92037
                                               
Chitayat Holdings LLC
    3,935,673 (13)     1.6 %     28,928       27.5 %     109,528       27.3 %
1836 Camino Del Teatro
                                               
La Jolla, CA 92037
                                               
Norden LLC
    7,870,307 (14)     3.1 %     -       -       -       -  
5641 N Broadway
                                               
Denver, CO 80216
                                               
Visser Precsion Cast, LLC
    44,000,000 (15)     16.2 %     -       -       -       -  
5641 N Broadway
                                               
Denver, CO 80216
                                               
Furniture Rowe, LLC
    51,870,307 (16)     19.1 %     -       -       -       -  
5641 N Broadway
                                               
Denver, CO 80216
                                               
 
*Less than one percent 

 
 
(1)
Shares of common stock beneficially owned and the respective percentages of beneficial ownership of common stock assumes the exercise or conversion of all options, warrants and other securities convertible into common stock, including shares of Series A-1 Preferred Stock and Series A-2 Preferred Stock, beneficially owned by such person or entity currently exercisable or exercisable within 60 days of February 20, 2013. Shares issuable pursuant to the exercise of stock options and warrants exercisable within 60 days of February 20, 2013, or securities convertible into common stock within 60 days of February 20, 2013 are deemed outstanding and held by the holder of such shares of common stock, options, warrants, or other convertible securities, including shares of Series A-1 Preferred Stock and Series A-1 Preferred Stock, for purposes of computing the percentage of outstanding common stock beneficially owned by such person, but are not deemed outstanding for computing the percentage of outstanding common stock beneficially owned by any other person. The percentage of beneficial ownership of common stock beneficially owned is based on 255,929,106 shares of common stock outstanding as of February 20, 2013. Each outstanding share of Series A-1 Preferred Stock is presently convertible into 50 shares of common stock. Each outstanding share of Series A-2 Preferred Stock is presently convertible into 22.7 shares of common stock. The shares of common stock beneficially owned and the respective percentages of beneficial ownership of common stock stated in these columns assume conversion of shares of Series A-1 Preferred Stock and Series A-2 Preferred Stock at these ratios.
 
 
 
(2)
Each outstanding share of Series A-1 Preferred Stock is presently convertible into 50 shares of common stock. The shares of Series A-1 Preferred Stock beneficially owned and the respective percentages of beneficial ownership of Series A-1 Preferred Stock stated in these columns reflect ownership of shares of Series A-1 Preferred Stock, and not shares of common stock issuable upon conversion of shares of Series A-1 Preferred Stock at this ratio.

 
(3)
Each outstanding share of Series A-2 Preferred Stock is presently convertible into 22.7 shares of common stock. The shares of Series A-2 Preferred Stock beneficially owned and the respective percentages of beneficial ownership of Series A-2 Preferred Stock stated in these columns reflect ownership of shares of Series A-2 Preferred Stock, and not shares of common stock issuable upon conversion of shares of Series A-2 Preferred Stock at this ratio.

 
(4)
Includes:

 
(a)
5,221,025 shares of common stock, 5,037,780 shares issuable pursuant to currently exercisable warrants and 5,713,977 shares of common stock issuable pursuant to currently convertible Series-A Preferred Stock held of record by Carlyle Holdings, LLC.  Mr. Mahamedi has the power to direct the voting and disposition of such shares as the president and a sole shareholder of Carlyle Development Group, Inc., which is a managing member of Carlyle Holdings, LLC;

 
(b)
759,428 shares of common stock, 1,756,155 shares issuable pursuant to currently exercisable warrants and 3,141,250 shares of common stock issuable pursuant to currently convertible Series A Preferred Stock held of record by Mr. Mahamedi.

 
(5)
Includes:

 
(a)
3,500,688 shares of common stock and 3,600,000 shares of restricted stock awards which vest ratably over four years on August 3, 2013, 2014 and 2015 held of record by Mr. Steipp; and

 
(b)
510,205 shares issuable pursuant to currently exercisable warrants held of record by Mr. Steipp.

 
(6)
Includes:

 
(a)
3,501,130 shares issuable pursuant to currently exercisable warrants held of record by Silver Lake Group, LLC.  Mr. Salas has the power to direct the voting and disposition of such shares as the sole shareholder of Silver Lake Group, LLC;

 
(b)
5,097,611 shares of common stock, 2,230,206 shares issuable pursuant to currently exercisable warrants held of record by Mr. Salas; and

 
(c)
300,000 shares issuable pursuant to outstanding stock options which are exercisable currently or within 60 days of February 26, 2013.  Does not include 1,200,000 shares that are issuable pursuant to outstanding stock options that are not exercisable currently or within 60 days of February 20, 2013.

 
(7)
Includes 7,000 shares held of record by Mr. Gillis and 4,700 shares held of record by Mr. Gillis’s child and spouse.  Mr. Gillis continues to beneficially own all such shares.

 
(8)
Includes:

 
(a)
565,344 shares of common stock and 255,103 shares issuable pursuant to currently exercisable warrants held of record by Mr. Chung;

 
(b)
260,000 shares issuable pursuant to outstanding stock options that are exercisable currently or within 60 days of February 26, 2013. Does not include 190,000 shares that are issuable pursuant to outstanding stock options that are not exercisable currently or within 60 days of February 20, 2013.

 
(9)
Includes 5,221,025 shares of common stock, 5,037,780 shares issuable pursuant to currently exercisable warrants and 5,713,977 shares of common stock issuable pursuant to currently convertible Series-A Preferred Stock held of record by Carlyle Holdings, LLC.
 
 
 
 
(10)
Includes:
 
 
(a)
3,873,325 shares of common stock, 2,354,762 shares issuable pursuant to currently exercisable warrants held of record by Atlantic Realty Group, Inc.  Mr. Chitayat has the power to direct the voting and disposition of such shares as the president and a sole shareholder of Atlantic Realty Group, Inc.;
 
 
(b)
2,544,289 shares of common stock, 1,929,219 shares issuable pursuant to currently exercisable warrants held of record by Mr. Chitayat;

 
(c)
3,935,673 shares of common stock issuable pursuant to currently convertible Series-A Preferred Stock held of record by Chitayat Holdings LLC.

 
(d)
750,000 shares issuable pursuant to outstanding stock options which are currently exercisable.

 
(11)
Includes 3,501,130 shares issuable pursuant to currently exercisable warrants.

 
(12)
Incudes 3,873,325 shares of common stock and 2,354,762 shares issuable pursuant to currently exercisable warrants.

 
(13)
Incudes 3,935,673 shares of common stock issuable pursuant to currently convertible Series-A Preferred Stock.

 
(14)
Includes 7,870,307 shares of common stock.

 
(15)
29,000,000 of restricted common stock and 15,000,000 shares issuable under warrants.  Both are subject to a lock-up period through December 31, 2016.
 
 
(16)
Includes:
 
 
(a)
7,870,307 shares of common stock that are held of record by Norden LLC.  Furniture Rowe, LLC has the power to direct the voting and disposition of such shares as the sole shareholder of Norden LLC;

 
(b)
29,000,000 of restricted common stock and 15,000,000 shares issuable under warrants that are held of record by Visser Precision Cast, LLC. Furniture Rowe, LLC has the power to direct the voting and disposition of such shares as the sole shareholder of Vissar Precision Cast, LLC.

Equity Compensation Plans Information

Our executive officers, directors, and all of our employees are allowed to participate in our equity incentive plans.  We believe that providing them with the ability to participate in such plans provides them with a further incentive towards ensuring our success and accomplishing our corporate goals.

The following table provides information regarding the securities authorized for issuance under our equity compensation plans as of December 31, 2012:

 
 
 
 
Plan Category
 
 
Number of securities
to be issued upon
exercise of
outstanding options,
warrants, and rights
[a]
   
 
Weighted-average
exercise price of
outstanding options, w
arrants, and rights
[b]
   
Number of securities
remaining available for
future issuance under equity
compensation plans
(excluding securities
reflected in column [a])
[c]
 
Equity compensation plans approved by stockholders
    3,722,000     $ 0.36       35,822,000  
Equity compensation plans not approved by stockholders
    --       --       --  
Total
    3,722,000               35,822,000  

The number of securities and types of plans available for future issuances of stock options as of December 31, 2012 were as follows:

Plan Name
 
Options and Warrants for Common Shares
 
   
Authorized
   
Exercised
   
Outstanding
   
Available
 
2002 Equity Incentive Plan
    10,000,000       456,000       3,392,000       6,152,000  
2012 Equity Incentive Plan
    30,000,000       --       330,000       29,670,000  
Total Stock Options
    40,000,000       456,000       3,722,000       35,822,000  
 
 
2002 Equity Incentive Plan

Our 2002 Equity Incentive Plan (the “2002 Plan”), which was adopted by our board of directors and approved by our stockholders in April 2002, provides for the grant of stock options to officers, employees, consultants, and directors of our company and its subsidiaries. The 2002 Plan provides for the granting to employees of incentive stock options within the meaning of Section 422 of the Internal Revenue Code of 1986, as amended, and for the granting to employees and consultants of non-statutory stock options. In addition, the 2002 Plan permits the granting of stock appreciation rights, or SARs, with or independently of options, as well as stock bonuses and rights to purchase restricted stock. A total of 10 million shares of our common stock may be granted under the 2002 Plan.

There were 3,392,000 outstanding options or stock awards at a weighted average price of $0.37 under the 2002 Plan as of December 31, 2012.  There were 1,866,000 options exercisable and 456,000 shares had been issued upon exercise of options under the 2002 Plan as of December 31, 2012.

The 2002 Plan expired by its terms in April 2012.  The 2002 Plan will remain in effect only with respect to the equity awards that have been granted under the 2002 Plan prior to its expiration.

2012 Equity Incentive Plan

On June 28, 2012, the Company adopted the 2012 Equity Incentive Plan (“2012 Plan”), with the approval of the shareholders, which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries.  The purpose of the 2012 Plan is to advance the interests of our stockholders by enhancing our ability to attract, retain, and motivate persons who make or are expected to make important contributions to our company and its subsidiaries by providing such persons with equity ownership opportunities and performance-based incentives, thereby better aligning their interests with those of our stockholders.

The 2012 Plan provides for the granting to employees of incentive stock options within the meaning of Section 422 of the Internal Revenue Code of 1986, as amended, and for the granting to employees and consultants of non-statutory stock options. In addition, it permits the granting of stock appreciation rights, or SARs, with or independently of options, as well as stock bonuses and rights to purchase restricted stock.  A total of 30 million shares of our common stock may be granted under the 2012 Plan, and all options granted under this plan had exercise prices that were equal to the fair market value on the date of grant.

There were 330,000 stock option awards issued and outstanding at a weighted average price of $0.28 under the 2012 Plan during and as of December 31, 2012.

Item 13. Certain Relationships and Related Transactions, and Director Independence

Certain Relationships and Related Transactions

On August 1, 2010, we entered into an agreement with John Kang, our former Chairman, to provide consulting services.  We terminated this agreement as of July 31, 2011.  The Company paid $0 and $210 thousand for his services during the years ended December 31, 2012 and 2011, respectively.

On October 14, 2010, we signed an agreement with Innovative Materials Group, LLC (“IMG”), a California limited liability company, which is majority owned by Mr. Kang.  Under the agreement, we received a deposit of $520 thousand from IMG to purchase on behalf of IMG, machinery and equipment located in China.  The transaction was based on the potential negotiation and completion of a non-exclusive license agreement with IMG under which the machinery and equipment would be transferred to IMG either directly or through the transfer of ownership of our former Chinese subsidiary, Advanced Metals Materials (“AMM”), that owned the equipment.

On August 5, 2011, we signed a Stock Purchase Agreement (the “Stock Purchase Agreement”) with IMG to sell all of the stock of AMM for $720 thousand (the “Purchase Price”) where IMG will apply to the payment of the Purchase Price the $520 thousand deposit previously paid to us and the $200 thousand balance of the Purchase Price was paid in the form of a Promissory Note due August 5, 2012, bearing an interest rate of 8% per annum. In conjunction with the Stock Purchase Agreement, we also entered into a license agreement with IMG (“IMG License Agreement”) to license certain patents and technical information for the limited purpose of manufacturing certain licensed products with our existing first generation, die cast machines.  The IMG License Agreement grants a non-exclusive license to certain product categories, as well as an exclusive license to specific types of consumer eyewear products, and obligates IMG to pay to us a running royalty based on its sales of Licensed Products.  The license will expire on August 5, 2021.   We recognized $26 thousand and $19 thousand in royalty revenues from IMG during the years ended December 31, 2012 and December 31, 2011, respectively.
 
 
On December 31, 2012, we signed an amendment to the IMG License Agreement whereby the $200 thousand Promissory Note from IMG along with accrued interest of $21 thousand was forgiven in exchange for the return of the eyewear license to us.  We accounted for this transaction as an exchange of non-monetary assets and re-classed the $221 thousand to eyewear license fee. While we continue to maintain an active interest in leveraging the eyewear license for prospective opportunities in the eyewear industry from both a products and licensing perspective, we determined that there was insufficient historical market data on the potential license applications presently available to provide a reasonable basis to fair value the license and its period of useful life.  Therefore, we recognized a $221 thousand impairment loss for accounting purposes as of December 31, 2012.

On December 20, 2011, Rockwall Holdings, Inc., a company controlled by Mr. Kang, entered into a transaction as one of the primary investors in Liquidmetal Coatings, LLC (“LMC”), our former subsidiary.

During the years ended December 31, 2012 and 2011, we incurred $2 thousand and $154 thousand in legal fees, respectively, to defend Mr. Kang, as the former Representative Director of our Korean subsidiary, against allegations relating to our Korean subsidiary’s involvement in customs reporting violations in South Korea that allegedly occurred in 2007 and 2008.  We agreed to reimburse Mr. Kang’s legal fees incurred on this issue through December 31, 2012.

In October 2009, Thomas Steipp, our President and Chief Executive Officer, Ricardo Salas, our Executive Vice President and Director, Tony Chung, our Chief Financial Officer, and Mr. Kang acquired a total of 100,000 shares of our Series A-1 Preferred Stock and warrants to purchase 2,500,000 shares of our common stock for an aggregate cash price of $495 thousand.  The Series A-1 Preferred Stock is convertible into our common stock at a conversion price of $0.10 per common share.  Furthermore, the warrants can be exercised for shares of our common stock at an exercise price of $0.49 per share and will expire on July 31, 2015. In April 2011, Mr. Steipp converted his 20,000 shares of Series A-1 Preferred Stock into a total of 1,130,688 shares of our common stock, including dividends received in the form of common stock.  In July 2011, Mr. Salas and Mr. Kang converted 50,000 and 19,000 respective shares of Series A-1 Preferred Stock into a total of 2,826,720 and 1,074,154 shares of our common stock, respectively, including dividends received in the form of common stock. Additionally, Mr. Salas remains as a member LMC’s board of director as of December 31, 2012.  On February 1, 2012, Mr. Chung converted his 10,000 shares of Series A-1 Preferred Stock into a total of 565,344 shares of our common stock, including dividends received in the form of common stock.

We have an exclusive license agreement with LLPG, Inc. (“LLPG”), a corporation owned principally by Jack Chitayat, our former director who ceased to be director in 2005.  Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  We, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG.    The exclusive license agreement with LLPG expires on December 31, 2021.  There were no revenues recognized from product sales and licensing fees from LLPG during the years ended December 31, 2012 and 2011.  There are no outstanding trade receivables due from LLPG as of December 31, 2012 and 2011.  As of December 31, 2012, Mr. Chitayat is a greater-than-5% beneficial owner of the Company.

On August 3, 2010, Tom Steipp received 6,000,000 restricted shares of our stock as part of his employment agreement with us.  These shares shall vest annually in 20% increments on each anniversary date of the employment agreement.  On July 27, 2011, the employment agreement was amended to defer the first anniversary vesting date from August 3, 2011 to December 15, 2011.  On July 31, 2012, the employment agreement was amended to defer the second anniversary vesting date from August 3, 2012 to December 15, 2012.

On June 1, 2012, we entered into a Master Transaction Agreement with Visser Precision Cast, LLC relating to a strategic transaction for manufacturing services and financing (see Significant Transactions).  As of December 31, 2012, Vissar Precision Cast, LLC is a greater-than-5% beneficial owner of the Company.

We believe that each of the foregoing transactions was consummated on terms at least as favorable to us as we would have expected to negotiate with unrelated third parties.

Review, Approval or Ratification of Transactions with Related Persons

Our policy is to require that any transaction with a related party required to be reported under applicable SEC rules, other than compensation-related matters, be reviewed and approved or ratified by the audit committee of our board of directors.  The audit committee of our board of directors has not adopted specific procedures for review of, or standards for approval of, these transactions, but instead reviews such transactions on a case by case basis.  Our policy is to require that all compensation-related matters be recommended for board approval by the compensation committee of our board of directors.  During the last fiscal year, no transactions with a related party have occurred that required a waiver of this policy nor have any transactions with a related party occurred in which we did not follow this policy.
 
 
Director Independence
 
Our board has determined that Mr. Hansen, Mr. Gillis, and Mr. Howard-Anderson are “independent directors” as such term is defined by the rules of the NASDAQ Stock Market, Inc. and Rule 10A-3(b)(i) under the Securities Exchange Act of 1933.

Item 14. Principal Accountant Fees and Services

The following table summarizes the aggregate fees billed to the Company by SingerLewak, LLP and Choi, Kim & Park, LLP, our principal accountants for professional services during the years ended December 31, 2012 and December 31, 2011, respectively:

Fees
  2012    
2011
 
Audit Fees (1)
  $
198,480
    $
162,592
 

(1) Audit Fees.

Fees for audit services billed in 2012 consisted of:
 
Audit of the Company’s financial statements for 2011; and
 
Review of the Company’s quarterly financial statements for 2012

No fees were paid to our current principal accountants during the year ended December 31, 2011.
 
 
PART IV

Item 15. Exhibits, Financial Statement Schedules
 
(a)  The following documents are filed as a part of this report:
 
1. Financial Statements. See the Index to Consolidated Financial Statements on page ­48.
 
2. Exhibits. See Item 15(b) below.
 
 
(b)  Exhibits.
The exhibits listed on the Exhibit Index, which appears at the end of this Item 15, are filed as part of, or are incorporated by reference into, this report.
 
(c)   Financial Statement Schedules. See Item 15(a)(2) above.
 
 
EXHIBIT INDEX
Exhibit
Number
Document Description
 
 
3.1
Certificate of Incorporation (incorporated by reference to Exhibit 3.1 to the Form 10-Q filed on August 14, 2003).
 
 
3.2
Bylaws (incorporated by reference to Exhibit 3.2 to the Form 10-Q filed on August 14, 2003).
 
 
3.3
Certificate of Designations, Preferences and Rights of Series A Preferred Stock of Liquidmetal Technologies, Inc. (incorporated by reference to Exhibit 3.1 to the Form 8-K filed on May 6, 2009).
 
 
3.4
Certificate of Amendment to the Certificate of Incorporation (incorporated by reference to Exhibit 3.1 to the Form 8-K filed on August 6, 2009).
 
 
3.5
Amended and Restated Certificate of Designations, Preferences and Rights of Series A Preferred Stock of Liquidmetal Technologies, Inc. (incorporated by reference to Exhibit 3.1 to the Form 10-Q filed on November 4, 2010).
 
 
3.6
Amendment to ByLaws of Liquidmetal Technologies, Inc. (incorporated by reference to Exhibit 3.1 to the Form 8-K filed on September 21, 2011).
 
 
3.7
Second Certificate of Amendment to the Certificate of Incorporation (incorporated by reference to Exhibit 3.1 to the Form 8-K filed on July 2, 2012).
 
 
4.1
Reference is made to Exhibits 3.1, 3.2, 3.3, 3.4, 3.5, 3.6 and 3.7.
 
 
4.2
Form of Common Stock Certificate (incorporated by reference to Exhibit 4.2 to the Form 10-Q filed on August 14, 2003).
 
 
10.1
Amended and Restated License Agreement, dated September 1, 2001, between Liquidmetal Technologies, Inc. and California Institute of Technology (incorporated by reference to Exhibit 10.1 to the Registration Statement on Form S-1 filed on November 20, 2001 (Registration No. 333-73716)).
 
 
10.2*
1996 Stock Option Plan, as amended, together with form of Stock Option Agreement (incorporated by reference to Exhibit 10.7 to the Registration Statement on Form S-1 filed on November 20, 2001 (Registration No. 333-73716)).
 
 
10.3*
2002 Equity Incentive Plan (incorporated by reference to Exhibit 10.23 to the Registration Statement on Form S-1 (Amendment No. 2) filed on April 5, 2002 (Registration No. 333-73716)).
 
 
10.4*
2002 Non-Employee Director Stock Option Plan (incorporated by reference to Exhibit 10.24 to the Registration Statement on Form S-1 (Amendment No. 2) filed on April 5, 2002 (Registration No. 333-73716)).
 
 
10.5
Form of Indemnity Agreement between Liquidmetal Technologies, Inc. and directors and executive officers (incorporated by reference from Exhibit 10.59 to the Form 10-K filed on March 16, 2006).
 
 
10.6
Standard Industrial / Commercial Single-Tenant Lease, dated February 13, 2007, between Liquidmetal Technologies, Inc. and 30452 Esperanza LLC (incorporated by reference from Exhibit 10.1 to the Form 10-Q filed on May 15, 2007).
 
 
10.7
Lease, dated March 19, 2007, between Liquidmetal Technologies, Inc. and Larry Ruffino and Roland Ruffino (incorporated by reference from Exhibit 10.1 to the Form 10-Q filed on May 15, 2007).
 
 
10.8
Form of Common Stock Purchase Warrant issued in connection with the 8% Senior Secured Convertible Subordinated Notes (incorporated by reference from Exhibit 10.3 to the Form 8-K filed on May 7, 2009).
 
 
10.9
Form of Common Stock Purchase Warrant issued in connection with the Series A Preferred Stock (incorporated by reference from Exhibit 10.4 to the Form 8-K filed on May 7, 2009).
 
 
10.10*
Employment Agreement, dated August 3, 2010, between Thomas Steipp and Liquidmetal Technologies, Inc. (incorporated by reference from Exhibit 10.1 to the Form 10-Q filed on November 4, 2010).
 
 
10.11*
Restricted Stock Agreement, dated August 3, 2010, between Thomas Steipp and Liquidmetal Technologies, Inc. (incorporated by reference from Exhibit 10.2 to the Form 10-Q filed on November 4, 2010).
 
 
10.12**
Master Transaction Agreement, dated August 5, 2010, between Apple Inc., Liquidmetal Technologies, Inc., Liquidmetal Coatings, LLC and Crucible Intellectual Property, LLC (incorporated by reference from Exhibit 10.3 to the Form 10-Q filed on November 4, 2010).
 
 
10.13
Subscription Agreement, dated August 10, 2010, between Liquidmetal Technologies, Inc. and Norden LLC (incorporated by reference from Exhibit 10.4 to the Form 10-Q filed on November 4, 2010).
 
 
10.14
Consent Agreement between Liquidmetal Technologies, Inc. and holders of the Series A-1 Preferred Stock and holders of the Series A-2 Preferred Stock (incorporated by reference from Exhibit 10.5 to the Form 10-Q filed on November 4, 2010).
 
 
10.15
Amendment No. 1 to Restricted Stock Award Agreement, dated July 27, 2011, between Liquidmetal Technologies, Inc. and Thomas Steipp (incorporated by reference from Exhibit 10.2 on the Form 10-Q filed on August 10, 2011).
 
 
10.16
Stock Purchase Agreement, dated August 5, 2011, between Liquidmetal Technologies, Inc. and Innovative Materials Groups, LLC (incorporated by reference from Exhibit 10.3 on the Form 10-Q filed on August 10, 2011).
 
 
10.17**
License Agreement, dated August 5, 2011, between Liquidmetal Technologies, Inc. and Innovative Materials Groups, LLC (incorporated by reference from Exhibit 10.4*on the Form 10-Q filed on August 10, 2011).
 
 
10.18*
Liquidmetal Technologies, Inc. 2012 Equity Incentive Plan (incorporated by reference from Exhibit 10.1 to the Form 8-K filed on July 2, 2012).
 
 
10.19
Securities Purchase Agreement, dated as of July 2, 2012, by and among Liquidmetal Technologies, Inc. and each of the investors named on the Schedule of Buyers attached thereto (incorporated by reference from Exhibit 10.1 to the Form 8-K filed on July 2, 2012).
 
 
10.20
Registration Rights Agreement, dated as of July 2, 2012, by and among Liquidmetal Technologies, Inc. and the investors named on the Schedule of Buyers attached thereto (incorporated by reference from Exhibit 10.2 to the Form 8-K filed on July 2, 2012).
 
 
10.21
Form of Senior Convertible Note (incorporated by reference from Exhibit 10.3 to the Form 8-K filed on July 2, 2012).
 
 
10.22
Form of Warrant to Purchase Common Stock (incorporated by reference from Exhibit 10.4 to the Form 8-K filed on July 2, 2012).
 
 
10.23
Master Transaction Agreement, dated as of June 1, 2012, between Liquidmetal Technologies, Inc. and Visser Precision Cast, LLC. (incorporated by reference from Exhibit 10.32 to the Registration Statement on S-1 filed July 18, 2012)
 
 
10.24**
Manufacturing Services Agreement, dated as of June 1, 2012, between Liquidmetal Technologies, Inc. and Visser Precision Cast, LLC. (incorporated by reference from Exhibit 10.33 to the Registration Statement on S-1 filed July 18, 2012)
 
 
10.25
Subscription Agreement, dated as of June 1, 2012, between Liquidmetal Technologies, Inc. and Visser Precision Cast, LLC. (incorporated by reference from Exhibit 10.34 to the Registration Statement on S-1 filed July 18, 2012)
 
 
10.26
Security Agreement, dated as of June 1, 2012, between Liquidmetal Technologies, Inc. and Visser Precision Cast, LLC. (incorporated by reference from Exhibit 10.35 to the Registration Statement on S-1 filed July 18, 2012)
 
 
10.27
Registration Rights Agreement, dated as of June 1, 2012, between Liquidmetal Technologies, Inc. and Visser Precision Cast, LLC. (incorporated by reference from Exhibit 10.36 to the Registration Statement on S-1 filed July 18, 2012)
 
 
10.28
VPC Sublicense Agreement, dated as of June 1, 2012, between Liquidmetal Technologies, Inc. and Visser Precision Cast, LLC.  (incorporated by reference from Exhibit 10.37 to the Registration Statement on S-1 filed July 18, 2012)
 
 
10.29
6% Senior Secured Convertible Note, dated June 1, 2012, issued to Visser Precision Cast, LLC. (incorporated by reference from Exhibit 10.38 to the Registration Statement on S-1 filed July 18, 2012)
 
 
10.30
Common Stock Purchase Warrant, dated June 1, 2012, issued to Visser Precision Cast, LLC. (incorporated by reference from Exhibit 10.39 to the Registration Statement on S-1 filed July 18, 2012)
 
 
10.31
Common Stock Purchase Warrant, dated June 28, 2012, issued to Visser Precision Cast, LLC. (incorporated by reference from Exhibit 10.40 to the Registration Statement on S-1 filed July 18, 2012)
 
 
10.32
Amendment Number One to Master Transaction Agreement and Other Transaction Documents, dated June 15, 2012, between Apple Inc., Liquidmetal Technologies, Inc., Liquidmetal Coatings, LLC and Crucible Intellectual Property, LLC. (incorporated by reference from Exhibit 10.41 to the o Registration Statement on Form S-1 (Amendent No. 1)  filed on August 3, 2012).
   
10.33
Amendment No. 1 to License Agreement, dated December 31, 2012, between Liquidmetal Technologies, Inc. and Innovative Materials Group, Inc.
   
14
Code of Ethics for Chief Executive Officer and Senior Financial and Accounting Officers (incorporated by reference to Exhibit 14 to the Form 10-K filed on November 10, 2004).
   
16.1
Letter from Choi, Kim, Park, LLP (incorporated by reference from Exhibit 16.1 to the Form 8-K filed on December 8, 2011)
 
 
21.1
Subsidiaries of the Registrant (incorporated by reference from Exhibit 21.1 to the Registration Statement on S-1 filed July 18, 2012).
 
 
23.1
Consent of Registered Independent Public Accounting Firm, SingerLewak LLP.
 
 
23.2
Consent of Registered Independent Public Accounting Firm, Choi, Kim & Park, LLP.
 
 
24.1
Power of Attorney relating to subsequent amendments (included on the signature page(s) of this report).
   
31.1
Certification of Principal Executive Officer pursuant to Rule 13a-14(a) or 15d-14(a) of the Securities Exchange Act of 1934, as amended.
   
31.2
Certification of Principal Financial Officer pursuant to Rule 13a-14(a) or 15d-14(a) of the Securities Exchange Act of 1934, as amended.
   
32.1 Certification pursuant to 18 U.S.C. 1350.
 
101
The following financial statements from Liquidmetal Technologies, Inc.’s Annual Report on Form 10-K for the year ended December 31, 2012, formatted in XBRL (eXtensible Business Reporting Language): (i) Condensed Consolidated Balance Sheets, (ii) Condensed Consolidated Statements of Operations and Comprehensive Income (Loss), (iii) Condensed Consolidated Statements of Shareholder’s Deficiency and (iv) Notes to Condensed Consolidated Financial Statements.
 
 
*
Denotes a management contract or compensatory plan or arrangement.

 
**
Portions of this exhibit have been omitted pursuant to a confidential treatment request. Omitted information has been filed separately with the Securities and Exchange Commission.
 
 
SIGNATURES
 
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
 
 
Liquidmetal Technologies, Inc.
 
     
 
By:
 
/s/ Thomas Steipp
 
   
Thomas Steipp
President and Chief Executive Officer
(Principal Executive officer)

KNOW ALL THESE PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Thomas Steipp and Tony Chung and each of them, jointly and severally, his attorneys-in-fact, each with full power of substitution, for him in any and all capacities, to sign any and all amendments to this Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each said attorneys-in-fact or his substitute or substitutes, may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this Report on Form 10-K has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated:
 
Signature
 
Title
 
Date
 
 
 
 
 
/s/ Thomas Steipp
       
   
Chief Executive Officer
 
February 26, 2013
Thomas Steipp
       
         
/s/ Tony Chung
       
   
Chief Financial Officer
 
February 26, 2013
Tony Chung
       
         
/s/  Bruce Bromage
       
   
Executive Vice President of Business Development and Operations
 
February 26, 2013
Bruce Bromage
       
         
/s/ Abdi Mahamedi
       
   
Chairman of the Board and Director
 
February 26, 2013
Abdi Mahamedi
       
         
/s/ Ricardo Salas
       
   
Executive Vice President and Director
 
February 26, 2013
Ricardo Salas
       
         
/s/ Mark Hansen
       
   
Director
 
February 26, 2013
Mark Hansen
       
         
/s/ Scott Gillis
       
   
Director
 
February 26, 2013
Scott Gillis
       
         
/s/ Bob Howard-Anderson
       
   
Director
 
February 26, 2013
Bob Howard-Anderson
       
 
Certifications provided as Exhibits.
 
 
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
 
 
Page
 
 
 
Report of Independent Registered Public Accounting Firm
49
Consolidated Financial Statements:
 
 
Consolidated Balance Sheets
50
 
Consolidated Statements of Operations and Comprehensive Income (Loss)
51
 
Consolidated Statements of Shareholders’ Equity (Deficit)
52
 
Consolidated Statements of Cash Flows
53
 
Notes to Consolidated Financial Statements
54
 
 
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
To the Board of Directors and Shareholders
Liquidmetal Technologies, Inc.

We have audited the accompanying consolidated balance sheets of Liquidmetal Technologies, Inc. and subsidiaries (collectively, the “Company”) as of December 31, 2012 and 2011, and the related consolidated statements of operations and comprehensive income (loss), shareholders’ equity (deficit), and cash flows for the years then ended. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
 
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of December 31, 2012 and 2011, and the results of its operations and its cash flows for the years then ended in conformity with U.S. generally accepted accounting principles.

The accompanying consolidated financial statements have been prepared assuming that the company will continue as a going concern. As discussed in Note 4 to the consolidated financial statements, the Company has suffered recurring losses from operations and has an accumulated deficit. This raises substantial doubt about the Company's ability to continue as a going concern. Management's plans in regard to these matters are also described in Note 4. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.
 
/s/ SingerLewak LLP

Los Angeles, California
February 26, 2013
 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
(in thousands, except share and per share data)
 
   
December 31,
2012
   
December 31,
2011
 
             
ASSETS
           
             
Current assets:
           
Cash
  $ 7,162     $ 122  
Trade accounts receivable, net of allowance for doubtful accounts of $11 and $0
    64       241  
Related party notes receivable
    -       200  
Prepaid expenses and other current assets
    689       248  
Total current assets
  $ 7,915     $ 811  
Property and equipment, net
    161       162  
Patents and trademarks, net
    869       968  
Other assets
    28       52  
Total assets
  $ 8,973     $ 1,993  
                 
LIABILITIES AND SHAREHOLDERS' DEFICIT
               
                 
Current liabilities:
               
Accounts payable
    154       803  
Accrued liabilities
    248       457  
Accrued dividends
    222       571  
Deferred revenue
    -       67  
Short-term debt
    -       1,712  
Convertible note, net of debt discount of $4,635
    2,365       -  
Embedded conversion feature liability
    3,934       -  
Total current liabilities
  $ 6,923     $ 3,610  
                 
Long-term liabilities
               
Warrant liabilities
    2,766       -  
Other long-term liabilities
    856       609  
Total liabilities
  $ 10,545     $ 4,219  
                 
Shareholders' deficit:
               
Convertible, redeemable Series A Preferred Stock, $0.001 par value; 10,000,000 shares authorized; 506,936 and 1,299,151 shares issued and outstanding at December 31, 2012 and December 31, 2011, respectively
    -       1  
Common stock, $0.001 par value; 400,000,000 shares authorized; 242,074,324 and 134,467,554 shares issued and outstanding at December 31, 2012 and December 31, 2011, respectively
    242       130  
Warrants
    18,179       24,438  
Additional paid-in capital
    169,891       149,064  
Accumulated deficit
    (189,884 )     (175,859 )
Total shareholders' deficit
  $ (1,572 )   $ (2,226 )
                 
Total liabilities and shareholders' deficit
  $ 8,973     $ 1,993  
 
The accompanying notes are an integral part of the consolidated financial statements.
 
 
LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME (LOSS)
(in thousands, except share and per share data)
 
   
Years Ended December 31,
 
   
2012
   
2011
 
             
Revenue
           
Products
  $ 591     $ 572  
Licensing and royalties
    59       400  
Total revenue
    650       972  
                 
Cost of revenue, products
    354       373  
Gross margin
    296       599  
                 
Operating expenses
               
Selling, marketing, general and administrative
    4,850       4,243  
Research and development
    943       1,120  
Manufacturing contract costs
    6,300       -  
Settlement expense
    -       1,713  
Total operating expenses
    12,093       7,076  
Operating loss from continuing operations
    (11,797 )     (6,477 )
                 
Change in value of warrants, gain
    6,547       1,328  
Change in value of embedded conversion feature liability, gain
    4,931       -  
Debt discount amortization expense
    (11,949 )     -  
Financing costs
    (1,355 )     -  
Other income
    34       26  
Interest expense
    (459 )     (90 )
Interest income
    23       22  
                 
Loss from continuing operations before income taxes
    (14,025 )     (5,191 )
                 
Income taxes
    -       -  
                 
Loss from continuing operations
    (14,025 )     (5,191 )
                 
Discontinued operations:
               
Gain on disposal of subsidiary, net of tax
    -       12,109  
Loss from operations of discontinued operations, net of tax
    -       (763 )
                 
Net income (loss)
    (14,025 )     6,155  
                 
Other comprehensive income
               
Foreign exchange translastion gain during the period
    -       -  
Comprehensive income (loss)
  $ (14,025 )   $ 6,155  
                 
Per common share basic and diluted:
               
                 
Net income (loss) per share - basic
               
Loss from continuing operations
  $ (0.07 )   $ (0.04 )
Income from discontinued operations
    -       0.09  
Basic income (loss) per share
  $ (0.07 )   $ 0.05  
                 
Net income (loss) per share - diluted
               
Loss from continuing operations
  $ (0.07 )   $ (0.04 )
Income from discontinued operations
    -       0.07  
Diluted income (loss) per share
  $ (0.07 )   $ 0.03  
                 
Number of weighted average shares - basic
    188,298,113       118,523,228  
Number of weighted average shares - diluted
    188,298,113       163,292,496  
 
The accompanying notes are an integral part of the consolidated financial statements.
 
 
LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY (DEFICIT)
(in thousands, except share and per share data)
 
   
Preferred Shares
   
Common
Shares
   
Preferred Stock
   
Common
Stock
   
Warrants part of Additional Paid-in Capital
   
Additional
Paid-in
Capital
   
Accumulated
Deficit
   
Accumulated
Other
Compre-
hensive
Income (Loss)
   
Non- controlling Interest
   
Total
 
Balance, December 31, 2010
    2,171,760       93,695,375     $ 2     $ 88     $ 24,438     $ 145,247     $ (181,923 )   $ 1,494     $ 2,507     $ (8,147 )
                                                                                 
Conversion of preferred stock
    (872,609 )     36,173,750       (1 )     36       -       (35 )     -       -       -       -  
Common stock issuance
    -       4,496,429       -       4       -       2,796       -       -       -       2,800  
Warrant exercises
    -       -       -       -       -       -       -       -       -       -  
Stock option exercises
    -       102,000       -       -       -       13       -       -       -       13  
Stock-based compensation
    -       -       -       -       -       111       -       -       -       111  
Restricted stock issued to officer
    -       -       -       2       -       440       -       -       -       442  
Dividend distribution
    -       -       -       -       -       492       -       -       -       492  
Foreign exchange translation gain
    -       -       -       -       -       -       -       (1,494 )     -       (1,494 )
Discontinued operations
    -       -       -       -       -       -       (91 )     -       (2,507 )     (2,598 )
Net income
    -       -       -       -       -       -       6,155       -       -       6,155  
                                                                                 
                                                                                 
Balance, December 31, 2011
    1,299,151       134,467,554     $ 1     $ 130     $ 24,438     $ 149,064     $ (175,859 )   $ -     $ -     $ (2,226 )
                                                                                 
Conversion of preferred stock
    (792,215 )     25,669,752       (1 )     26       -       (25 )     -       -       -       -  
Common stock issuance
    -       80,171,418       -       83       -       13,839       -       -       -       13,922  
Warrant exercises
    -       1,411,600       -       1       (6,259 )     6,258       -       -       -       -  
Stock option exercises
    -       354,000       -       1       -       43       -       -       -       44  
Stock-based compensation
    -       -       -       -       -       53       -       -       -       53  
Restricted stock issued to officer
    -       -       -       -       -       310       -       -       -       310  
Dividend distribution
    -       -       -       -       -       349       -       -       -       349  
Net loss
    -       -       -       -       -       -       (14,025 )     -       -       (14,025 )
                                                                                 
                                                                                 
Balance, December 31, 2012
    506,936       242,074,324     $ -     $ 242     $ 18,179     $ 169,891     $ (189,884 )   $ -     $ -     $ (1,572 )
 
The accompanying notes are an integral part of the consolidated financial statements.
 
 
LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
(in thousands, except share and per share data)
 
   
Years Ended December 31,
 
   
2012
   
2011
 
             
Operating activities:
           
Net loss
  $ (14,025 )   $ 6,155  
Gain on disposal of subsidiary, net of tax
    -       (12,109 )
Loss from operations of discontinued operations, net of tax
    -       763  
Net loss attributable to continuing operations
  $ (14,025 )   $ (5,191 )
                 
Adjustments to reconcile net loss attributable to continuing operations to net cash provided (used in) operating activities:
         
Loss on disposal of asset
    -       9  
Gain attributable to noncontrolling interest of discontinued subsidiary
    -       (587 )
Depreciation and amortization
    186       182  
Impairment charge
    221       -  
Stock-based compensation
    53       553  
Resticted stock compensation issued to officer
    310       -  
Gain from change in value of warrants
    (6,547 )     (1,328 )
Gain from change in value of embedded conversion feature liability
    (4,931 )     -  
Manufacturing contract costs
    6,300       -  
Debt discount amortization
    11,949       -  
Non-cash interest expense
    434       -  
Financing costs
    1,355       -  
                 
Changes in operating assets and liabilities:
               
Trade accounts receivable
    177       (192 )
Notes receivable
    -       (200 )
Inventories
    -       7  
Prepaid expenses and other current assets
    (5 )     539  
Other assets
    24       138  
Accounts payable and accrued expenses
    (854 )     1,022  
Deferred revenue
    (67 )     58  
Other liabilities
    247       (73 )
Net cash used in continuing operations
    (5,173 )     (5,063 )
Changes in net assets and liabilities of  discontinued operations
    -       12,134  
Net cash provided by (used in) operating activities
    (5,173 )     7,071  
                 
Investing Activities:
               
Purchases of property and equipment
    (51 )     (178 )
Investment in patents and trademarks
    (35 )     -  
                 
Net cash used in investing activities
    (86 )     (178 )
                 
Financing Activities:
               
Proceeds from short-term debt
    1,050       -  
Repayment of short-term debt
    (2,762 )     -  
Payment of debt issuance costs
    (1,033 )     -  
Proceeds from exercise of stock options
    44       13  
Proceeds from convertible debt issuance
    12,000       -  
Proceeds from stock issuance
    3,000       -  
Net cash provided by continuing operations
    12,299       13  
Net cash used in discontinued operations
    -       (10,363 )
Net cash provided by (used in) financing activities
    12,299       (10,350 )
                 
Effect of foreign exchange translation
    -       (1,493 )
Net increase (decrease) in cash and cash equivalents
    7,040       (4,950 )
                 
Cash and cash equivalents at beginning of period
    122       5,072  
Cash and cash equivalents at end of period
  $ 7,162     $ 122  
                 
                 
Supplemental Schedule of Non-Cash Investing and Financing Activities:
               
Offering cost in relation to common stock issuance
    2,905       -  
Cashless exercise of warrants
    6,259       -  
Pre-installment payment of convertible debt through common stock issuance
    1,240       -  
 
The accompanying notes are an integral part of the consolidated financial statements.
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)

1. Description of Business

Liquidmetal Technologies, Inc. (the “Company”) is a materials technology company that develops and commercializes products made from amorphous alloys.  The Company’s family of alloys consists of a variety of bulk alloys and composites that utilizes the advantages offered by amorphous alloys technology.  The Company designs, develops and sells products and components from bulk amorphous alloys to customers in various industries. The Company also partners with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products.  The Company believes that its proprietary bulk alloys are the only commercially viable bulk amorphous alloys currently available in the marketplace.

Amorphous alloys are in general unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structure that forms in other metals and alloys when they solidify.  Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that the Company believes will make them preferable to other materials in a variety of applications. The amorphous atomic structure of bulk alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. The Company believes these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a wide variety of applications. Moreover, the Company believes these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

The Company’s revenues are derived from i) selling bulk Liquidmetal alloy products, which include non-consumer electronic devices, medical products, automotive components, and sports and leisure goods, ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development: iii) product licensing and royalty revenue, and iv) research and development revenue.  The Company expects that these sources of revenue will continue to significantly change the character of the Company’s revenue mix.

2. Summary of Significant Accounting Policies

Principles of Consolidation. The consolidated financial statements include the accounts of Liquidmetal Technologies, Inc. and its special-purpose wholly-owned subsidiaries, Crucible Intellectual Property and Liquidmetal Golf. All intercompany balances and transactions have been eliminated.

Non-controlling interest.  The result of operations attributable to the non-controlling interest of discontinued operations are presented within equity and are shown separately from the Company’s equity.

Revenue Recognition. Revenue is recognized pursuant to applicable accounting standards including FASB ASC Topic 605 (“ASC 605”), Revenue Recognition. ASC 605 summarize certain points of the SEC staff’s views in applying generally accepted accounting principles to revenue recognition in financial statements and provide guidance on revenue recognition issues in the absence of authoritative literature addressing a specific arrangement or a specific industry.

The Company’s revenue recognition policy complies with the requirements of ASC 605.  Revenue is recognized when i) persuasive evidence of an arrangement exists, ii) delivery has occurred, iii) the sales price is fixed or determinable, iv) collection is probable and v) all obligations have been substantially performed pursuant to the terms of the arrangement. Revenues primarily consist of the sales and prototyping of Liquidmetal mold and bulk alloys, licensing and royalties for the use of the Liquidmetal brand and bulk Liquidmetal alloys.  Revenue is deferred and included in liabilities when the Company receives cash in advance for goods not yet delivered or if the licensing term has not begun.

License revenue arrangements in general provide for the grant of certain intellectual property rights for patented technologies owned or controlled by the Company. These rights typically include the grant of an exclusive or non-exclusive right to manufacture and/or sell products covered by patented technologies owned or controlled by the Company.  The intellectual property rights granted may be perpetual in nature, extending until the expiration of the related patents, or can be granted for a defined period of time.

Licensing revenues that are one time fees upon the granting of the license are recognized when i) the license term begins in a manner consistent with the nature of the transaction and the earnings process, ii) when collectability is reasonably assured or upon receipt of an upfront fee, and iii) when all other revenue recognition criteria have been met.  Pursuant to the terms of these agreements, the Company has no further obligation with respect to the grant of the license.  Licensing revenues that are related to royalties are recognized as the royalties are earned over the related period.
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)

Cash. The Company considers all highly liquid investments with maturity dates of three months or less when purchased to be cash equivalents. The Company limits the amount of credit exposure to each individual financial institution and places its temporary cash into investments of high credit quality with a financial institution that exceeds federally insured limits.  The Company has not experienced any losses related to these balances and believes its credit risk to be minimal.

Trade Accounts Receivable. The Company grants credit to its customers generally in the form of short-term trade accounts receivable. The creditworthiness of customers is evaluated prior to signing a contract with the customer.  As of December 31, 2012, 3 customers represented 96%, or $72, of the total outstanding trade accounts receivable. As of December 31, 2011, three customers represented 67%, or $162, of the total outstanding trade accounts receivable. During 2012, there were 3 major customers, who together accounted for 70% of the revenue. During 2011, there were three major customers, who together accounted for 66% of the revenue.  In the future, the Company expects that a significant portion of the revenue may continue to be concentrated in a limited number of customers, even if the bulk alloys business grows.

The allowance for doubtful accounts reflects management's best estimate of probable losses inherent in the trade accounts receivable.  Management primarily determines the allowance based on the aging of accounts receivable balances, historical write-off experience, customer concentrations, customer creditworthiness and current industry and economic trends.  The Company's provisions for uncollectible receivables are included in selling, marketing, general and administrative expense in the accompanying consolidated statements of operations and comprehensive loss.

Property and Equipment. Property and equipment are stated at cost less accumulated depreciation and amortization. Additions and major renewals are capitalized. Repairs and maintenance are charged to expense as incurred. Upon disposal, the related cost and accumulated depreciation are removed from the accounts, with the resulting gain or loss included in operating income. Depreciation is provided principally on the straight-line method over the estimated useful lives of the assets, which range from one to five years.

Intangible Assets. Intangible assets consist of the costs incurred to purchase patent rights and costs incurred to internally develop patents and trademarks. Intangible assets are reported net of accumulated amortization. Patents and trademarks are amortized using the straight-line method over a period based on their contractual lives ranging from ten to seventeen years.
 
Impairment of Long-lived Assets. The Company reviews long-lived assets to be held and used in operations for impairment whenever events or changes in circumstances indicate that the carrying value of an asset may be impaired. An impairment loss is recognized when the estimated fair value of the assets is less than the carrying value of the assets.

Fair Value Measurements. The estimated fair values of amounts reported in the consolidated financial statements have been determined using available market information and valuation methodologies, as applicable.  The fair value of cash, trade receivables, prepaid expenses and other current assets, accounts payable, and accrued liabilities approximate their carrying value due to their short maturities.  The fair value of non-current assets and liabilities approximate their carrying value unless otherwise stated. The carry amounts reported for debt obligations approximate fair value due to the effective interest rate of these obligations reflecting the Company’s current borrowing rate.

Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Entities are required to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value based upon the following fair value hierarchy:

Level 1 —
Quoted prices in active markets for identical assets or liabilities;

Level 2 —
Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and

Level 3 —
Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

The Company has one Level 2 financial instrument, warrants that are recorded at fair value on a periodic basis.  Warrants are evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such warrants is estimated using the Black-Scholes option pricing model. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815 (see note 12).
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)

The Company has one Level 3 financial instrument, an embedded derivative that is recorded at fair value on a periodic basis. The embedded derivative is evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such embedded derivative is estimated using the Monte Carlo simulation model. The foregoing embedded derivative has certain anti-dilution and exercise price reset provisions which qualify the embedded derivative to be classified as a liability under FASB ASC 815 (see note 11).

As of December 31, 2012, the following table represents the Company’s fair value hierarchy for items that are required to be measured at fair value on a recurring basis:

   
Fair Value
   
Level 1
   
Level 2
   
Level 3
 
                         
Embedded conversion feature liability
    -       -       -     $ 3,934  
Warrant liabilities
    -       -     $ 2,766       -  
 
Research and Development Expenses. Research and development expenses represent salaries, related benefits expense, expenses incurred for the design and testing of new processing methods and other expenses related to the research and development of Liquidmetal alloys. Development costs incurred in research and development activities are expensed as incurred.

Advertising and Promotion Expenses. Advertising and promotion expenses are expensed when incurred. Advertising and promotion expenses were $41 and $16, for the years ended December 31, 2012 and 2011, respectively.

Legal Costs. Legal costs are expensed as incurred.

Stock-Based Compensation.  The Company accounts for share-based compensation in accordance with the fair value recognition provisions of FASB ASC Topic 718, Share-based Payment, which requires all share-based payments to employees, including grants of employee stock options, to be recognized in the consolidated financial statements based on their fair values. The fair value of stock options is calculated by using the Black-Scholes option pricing formula that requires estimates for expected volatility, expected dividends, the risk-free interest rate and the term of the option. If any of the assumptions used in the Black-Scholes model change significantly, share-based compensation expense may differ materially in the future from that recorded in the current period.

Income Taxes. Income taxes are provided under the asset and liability method as required by FASB ASC Topic 740, Accounting for Income Taxes. Under this method, deferred income taxes are recognized for the tax consequences of “temporary differences” by applying enacted statutory tax rates applicable to future years to differences between the financial statement carrying amounts and the tax basis of existing assets and liabilities. The effect of a tax rate change on deferred taxes is recognized in operations in the period that the change in the rate is enacted. Valuation allowances are established when necessary to reduce net deferred tax assets to the amount expected to be realized.  Under the provision of FASB ASC Topic 740, the Company had no material unrecognized tax benefits and no adjustments to liabilities or operations were required. The Company may recognize interest and penalties related to uncertain tax positions in income tax expense. There was no expense related to interest and penalties for the year ended December 31, 2012.

Earnings Per Share. Basic earnings per share (“EPS”) is computed by dividing earnings (losses) attributable to common shareholders by the weighted average number of common shares outstanding for the periods. Diluted EPS reflects the potential dilution that could occur if securities or other contracts to issue common stock were exercised or converted into common stock.
 
Use of Estimates. The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reported periods. Actual results could differ from those estimates. These management estimates are primarily related to impairment of long-lived assets, inventory valuation, product warranty, allowance for bad debt account balances, and warrant valuation.

Subsequent Events.  In May 2009, the FASB issued a new accounting standard which established general accounting standards and disclosure for subsequent events.  In accordance with this standard, the Company evaluated subsequent events through the filing of its Annual Report on Form 10-K with the SEC.

Reclassification.  During the year ended December 31, 2011, the Company had discontinued and deconsolidated operations of its subsidiaries and had reclassified the related items on its consolidated balance sheets and consolidated statements of operations and comprehensive income (loss) as of December 31, 2011 to conform to the current year presentation.
 

LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)

Recent Accounting Pronouncements.

In June 2011, the FASB, issued guidance regarding the presentation of comprehensive income. The new guidance eliminates the option to report other comprehensive income and its components in the statement of changes in equity. Instead, an entity is required to present either a continuous statement of net income and other comprehensive income or two separate but consecutive statements.  The updated guidance is effective on a retrospective basis for financial statements issued for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2011. The Company adopted the guidance beginning on January 1, 2012.

In May 2011, the FASB issued additional guidance on fair value measurements that clarifies the application of existing guidance and disclosure requirements, changes certain fair value measurement principles and requires additional disclosures about fair value measurements. The updated guidance is effective on a prospective basis for financial statements issued for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2011.  The Company adopted the guidance beginning on January 1, 2012.

Other recent accounting pronouncements issued by the FASB (including its Emerging Issues Task Force), the AICPA and the SEC did not or are not believed by management to have a material impact on the Company's present or future consolidated financial statements.

3.  Significant Transactions

July 2012 Private Placement
 
On July 2, 2012, the Company entered into a private placement transaction (the “July 2012 Private Placement”) for $12 million in principal amount of senior convertible notes due on September 1, 2013.  The notes are convertible at any time at the option of the holders, into shares of the Company’s common stock at a conversion price of $0.352 per share.  In the event that the Company issues or sells shares of the Company’s common stock for a price per share that is less than the conversion price then in effect, the conversion price then in effect will be decreased to such lower price, subject to customary exceptions.  The notes bear interest at 8% per annum and are payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012.  Each monthly installment payment may be made in cash, shares of the Company’s common stock, or a combination thereof.  If paid in shares, such shares will be valued at the lower of (i) the then applicable conversion price or (ii) a price that is 87.5% of the arithmetic average of the ten (or in some cases fewer) lowest weighted average prices of the Company’s common stock during the twenty trading day period ending two trading days before the payment date or the date on which the Company elects to pay in shares, whichever is lower (the “Measurement Period”).  The Company’s ability to make such payments with shares of the Company’s common stock will be subject to certain conditions including (i) a minimum of $250 in average daily trading volume during the Measurement Period, (ii) a minimum of $150 in daily trading volume during each day during the Measurement Period, with certain exceptions, and (iii) the effectiveness of a resale registration statement with respect to the shares. As of December 31, 2012, the Company issued 50,171,418 shares of common stock in satisfaction of five monthly installments that were due during 2012 under the July 2012 Private Placement (see note 11).

As a part of the July 2012 Private Placement, the Company issued warrants to purchase 18,750,000 shares of the Company’s common stock at an exercise price of $0.384 per share, and such warrants first became exercisable within six months of the issuance date thereof.  In the event that the Company issues or sells shares of the Company’s common stock at a price per share that is less than the exercise price then in effect, the exercise price of the warrants will be reduced based on a weighted-average formula. In addition, on the two year anniversary of the issuance date, the then applicable exercise price may be reset to equal the lesser of (i) the then current exercise price or (ii) 87.5% of the arithmetic average of the ten lowest weighted average prices of the common stock during the twenty trading day period ending two trading days immediately preceding the reset date.  All of the warrants will expire on July 2, 2017.
 
June 2012 Visser MTA Agreement

On June 1, 2012, the Company entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

Under the manufacturing/sublicense component of the Visser MTA Agreement, the Company has agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions.  Further, the Company has agreed to sublicense to Visser, on a fully-paid up, royalty-free, irrevocable, perpetual, worldwide basis, all intellectual property rights held by the Company.  In addition, Visser has a right of first refusal over any proposed transfer by the Company of its technology pursuant to any license, sublicense, sale or other transfer, other than a license to a machine or alloy vendor.
 

LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)
 
Under the financing component of the Visser MTA Agreement, the Company issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000, (ii) warrants to purchase 15,000,000 shares of common stock at an exercise price of $0.22 per share which expire on June 1, 2017 and (iii) a secured convertible promissory note (the “Promissory Note”) in the aggregate principal amount of up to $2,000 which was convertible into shares of common stock at a conversion rate of $0.22 per share.  The Promissory Note was issued pursuant to a $2,000 loan facility made available by Visser, but no borrowings were made by the Company under this loan facility, as the deadline for making borrowings under the facility expired on November 15, 2012. All of the shares of common stock issuable upon exercise of the warrants is subject to a lock-up period through December 31, 2016.

The warrants under the Visser MTA Agreement contain certain anti-dilution and exercise price reset provisions which results in liability accounting under FASB ASC 815 (see note 12).  In relation to the financing cost component to the Visser transaction, the Company performed a prorated allocation of the fair value of the warrants on the convertible promissory note and the common stock based on their relative fair values. The Company capitalized deferred financing costs in relation to the convertible promissory note totaling $1,355 and offset additional paid-in capital for $2,905 in relation to the warrant. The Company assessed the value of the deferred financing costs as of the quarter ended June 30, 2012 and determined that the value was impaired due to the limitations on the Company’s ability to request for advances as discussed above. Therefore, the Company expensed the deferred financing costs totaling $1,355 as of the quarter ended June 30, 2012.

In connection with the Visser MTA Agreement, the Company performed a valuation analysis of the manufacturing service and financing components of the Visser MTA Agreement as part of the bundled contract. The Company has assessed and determined that while these components may have market value on stand-alone basis, the values of the manufacturing component and sublicense component were deemed immaterial for accounting purposes. Further, the Company’s weighted average market stock price was approximately $0.31 per share at the time of share issuances to Visser. As the actual share purchase price related to the financing component of the Visser MTA Agreement was $0.10 per share, the $0.21 per share difference was treated as manufacturing contract costs and $6,300 was expensed as operating expenses during the second quarter ended June 30, 2012.

On January 17, 2012, February 27, 2012, March 28, 2012 and April 25, 2012, the Company issued 8% unsecured, bridge promissory notes to Visser that were due upon demand in the amounts of $200, $200, $350 and $300, respectively.  The aggregate principal amount of $1,050 and accrued interest under the bridge promissory notes were all paid off on June 1, 2012 by utilizing a portion of the proceeds received under the financing component of the Visser MTA Agreement.

Apple License Transaction

On August 5, 2010, the Company entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) the Company contributed substantially all of its intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to the Company a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use.  Additionally, in connection with the license transaction, Apple required the Company to complete a statement of work related to the exchange of Liquidmetal intellectual property information.  The Company recognized a portion of the one-time license fee upon receipt of the initial payment and completion of the foregoing requirements under the license transaction.  The remaining portion of the one-time license fee was recognized at the completion of the required statement of work.

Under the agreements relating to the license transaction with Apple, the Company is obligated to contribute all intellectual property that it developed through February 2012 (and subsequently amended to extend through February 2014) to CIP. The Company is also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

Other License Transactions

On January 31, 2012, the Company and Engel Austria Gmbh (“Engel”) entered into a Supply and License Agreement for a five year term whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to the Company’s licensees.

On November 16, 2011, the Company and Materion Brush Inc. (“Materion”) entered into a Development Agreement to evaluate, analyze and develop amorphous alloy feedstock to be supplied in commercial quantities.  Further, on June 17, 2012, the Company entered into a Sales Representation Agreement with Materion whereby Materion shall promote the sale of Liquidmetal’s products for certain commissions.  This agreement is for a two year initial term with annual, automatic renewals.
 

LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf.  This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf.  Liquidmetal Technologies owns 79% of the outstanding common stock in Liquidmetal Golf.

In June 2003, the Company entered into an exclusive license agreement with LLPG, Inc. (“LLPG”).  Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG.  The exclusive license agreement with LLPG expires on December 31, 2021.

In March 2009, the Company entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a perpetual non-exclusive license to the Company’s technology to produce and market watches and certain other luxury products.  In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches, and the Company’s license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. The Company will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch.  The license agreement with Swatch will expire on the expiration date of the last licensed patent.

4. Liquidity and Going Concern Issues

The Company’s cash used in continuing operations was $5,173 for the year ended December 31, 2012, while cash used in continuing operations was $5,063 for the year ended December 31, 2011.  The Company’s cash used in investing activities was $86 for the year ended December 31, 2012 primarily from purchase of property and equipment. The Company’s cash provided by financing activities of continuing operations was $12,299 for the year ended December 31, 2012 primarily from convertible debt issuance.  As of December 31, 2012, the Company’s cash balance was $7,162.
 
On July 2, 2012, the Company entered into definitive agreements relating to a private placement of $12,000 in principal amount of Senior Convertible Notes due on September 1, 2013 and Warrants to the purchasers of such Convertible Notes giving such purchasers the right to purchase up to an aggregate of 18,750,000 shares of the Company’s common stock at an exercise price of $0.384 per share.  At December 31, 2012, the outstanding principal and accrued but unpaid interest under the Convertible Notes was $7,000 (see note 3).

The Company anticipates that the Company’s current capital resources, together with income from operations, will be sufficient to fund the Company’s operations through the end of 2013.  The Company has a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale.  Furthermore, Visser’s ability to produce the Company’s products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of the Company’s control, including the nature and design of the component, the customer’s specifications, and required delivery timelines.  Such factors will likely require that the Company raise additional funds to support the Company’s operations beyond 2013.  There is no assurance that the Company will be able to raise such additional funds on acceptable terms, if at all.  If the Company raises additional funds by issuing securities, existing stockholders may be diluted.  If funding is insufficient at any time in the future, the Company may be required to alter or reduce the scope of the Company’s operations or to cease operations entirely.  As a result of these and other factors, the Company’s independent registered public accounting firm has indicated, in their audit opinion on the Company’s 2012 consolidated financial statements, that there is substantial doubt about the Company’s ability to continue as a going concern.

5. Trade accounts receivable

Trade accounts receivable from continuing operations were comprised of the following:
 
   
December 31,
 
   
2012
   
2011
 
Trade accounts receivable
  $ 75     $ 241  
Less: Allowance for doubtful accounts
    (11 )     -  
Trade accounts receivable, net
  $ 64     $ 241  
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)

6.  Prepaid Expenses and Other Current Assets

On July 2, 2012, the Company entered into the July 2012 Private Placement (see note 3).  In connection with this transaction, the Company capitalized legal and banking fees totaling $1,033 as deferred issuance costs.  These deferred issuance costs are amortized as debt discount amortization over the fourteen month term of the senior convertible notes under the transaction.  Deferred issuance costs are included in prepaid expenses and other current assets in the Company’s consolidated balance sheet and were $399 as of December 31, 2012, reflecting $634 of amortization expensed during the year ended December 31, 2012.

7. Property and Equipment

Property and equipment consist of the following:
 
   
December 31,
 
   
2012
   
2011
 
             
Machinery and equipment
  $ 1,098     $ 1,098  
Computer equipment
    118       70  
Office equipment, furnishings, and improvements
    190       187  
Total
    1,406       1,355  
Accumulated depreciation
    (1,245 )     (1,193 )
Total property and equipment, net
  $ 161     $ 162  
 
Depreciation expense for the years ended December 31, 2012 and 2011 were $52 and $45, respectively and is included in selling, marketing and general and administrative expense in the consolidated statements of operations and comprehensive income (loss).

8. Patents and trademarks, net

Patents and trademarks consist of the following:
 
   
December 31,
 
   
2012
   
2011
 
             
Purchased and licensed patent rights
  $ 566     $ 566  
Internally developed patents
    1,664       1,664  
Trademarks
    126       91  
Total
    2,356       2,321  
Accumulated amortization
  $ (1,487 )   $ (1,353 )
Total intangible assets, net
  $ 869     $ 968  
 
Amortization expense was $134 and $137 for the years ended December 31, 2012 and 2011, respectively.  The estimated aggregate amortization expense for each of the five succeeding years is as follows:
 
December 31,
 
Aggregate Amortization Expense
 
2013
    117  
2014
    102  
2015
    98  
2016
    95  
2017
    82  
Thereafter
    375  
 
 

LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)
 
Accumulated amortization for the years ended December 31, 2012 and 2011 is as follows:
 
   
December 31,
 
   
2012
   
2011
 
             
Purchased and licensed patent rights
  $ (457 )   $ (424 )
Internally developed patents
    (937 )     (847 )
Trademarks
    (93 )     (82 )
Total
  $ (1,487 )   $ (1,353 )
 
The weighted average amortization periods for the years ended December 31, 2012 and 2011 is as follows
 
   
December 31,
 
   
2012
   
2011
 
             
Purchased and licensed patent rights
    17       17  
Internally developed patents
    17       17  
Trademarks
    10       10  
 
Purchased patent rights represent the exclusive right to commercialize the bulk amorphous alloy and other amorphous alloy technology acquired from California Institute of Technology (“Caltech”), through a license agreement with Caltech and other institutions. All fees and other amounts payable by the Company for these rights and licenses have been paid or accrued in full, and no further royalties, license fees or other amounts will be payable in the future under the license agreements.
 
In addition to the purchased and licensed patents, the Company has internally developed patents. Internally developed patents include legal and registration costs incurred to obtain the respective patents. The Company currently holds various patents and numerous pending patent applications in the United States, as well as numerous foreign counterparts to these patents outside of the United States.

9. Other Long-Term Liabilities

Other Long-term Liabilities balance of $856 and $609 as of December 31, 2012 and 2011, respectively, consists of long term, aged payables to vendors, individuals, and other third parties that have been outstanding for more than 5 years.  The Company is in the process of researching and resolving the balances for settlement and/or write-off.

10. Short-term debt

On August 6, 2010, SAGA, SpA in Padova, Italy (“SAGA”), a specialist parts manufacturer, filed a litigation case against the Company claiming damages of $3,200 for payment on an alleged loan and for alleged breach of contract in connection with the formation of joint venture called Liquidmetal SAGA Italy, Srl (“LSI”).  On April 6, 2011 (the “Effective Date”), the Company entered into a Settlement and Equity Interest Purchase Agreement with SAGA pursuant to which (i) the joint venture between the Company and SAGA was terminated, (ii) the Company and SAGA both agreed to cause certain pending legal action against each other to be dismissed with prejudice, (iii) the Company paid SAGA $2,800 in the form of 4,496,429 restricted shares (“Shares”) of the Company’s common stock in exchange for SAGA’s equity interest in LSI, and (iv) the Liquidmetal technology license to LSI was terminated.

The number of Shares issued to SAGA on the Effective Date was based on the 30 day trailing, volume weighted average price of the Company’s stock as of the Effective Date.  An additional provision of the SAGA Settlement and Equity Interest Purchase Agreement was the obligation of the Company to issue a promissory note to compensate for a decrease in the market price of the Company’s common stock over a six month period from the Effective Date of the settlement.  On October 10, 2011, the Company issued to SAGA a promissory note in the principal amount of $1,712 due October 10, 2012, bearing interest of 8% per annum, to account for the decrease in the market price of the Company’s common stock.  The $1,712 principal amount of the note is included in Short Term Debt in the Company’s consolidated balance sheet as of December 31, 2011.

On July 11, 2012, the Company paid $1,743 to SAGA and paid off all amounts owed under the SAGA promissory note.  Interest expense related to the promissory note for the year ended December 31, 2012 and 2011 was $68 and $0,
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)
 
On January 17, 2012, February 27, 2012, March 28, 2012 and April 25, 2012, the Company issued 8% unsecured, bridge promissory notes to Visser that were due upon demand in the amount of $200, $200, $350 and $300, respectively.  The aggregate principal amount of $1,050 and accrued interest under the bridge promissory notes were all paid off on June 1, 2012 by utilizing a portion of the proceeds received under the financing component of the Visser MTA Agreement (see note 3).  Interest expense on the bridge promissory notes was $18 for the year ended December 31, 2012.

11.  Convertible Note and Embedded Conversion Feature Liability

On July 2, 2012, the Company entered into the July 2012 Private Placement for $12,000 in principal amount of senior convertible notes due on September 1, 2013 (see note ­­3).  The notes will be convertible at any time at the option of the holders, into shares of the Company’s common stock at a conversion price of $0.352 per share.  Pursuant to ASC 815-40, due to the anti-dilution provision of the convertible notes, the conversion feature of the convertible notes is not indexed to the Company’s owned stock and should be bifurcated and recognized as a derivative liability in the consolidated balance sheets and measured at fair value.  The notes bear interest at 8% per annum and are payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012.

The embedded conversion feature liability and warrants issued in connection with the senior convertible notes were valued utilizing the Monte Carlo simulation and Black Sholes pricing model at $8,865 and $5,053, respectively, totaling $13,918 as of July 2, 2012.  $12,000 of this total was recorded as debt discount and the excess of the face value of the embedded conversion feature liability and warrants of $1,918 was booked to debt discount amortization on July 2, 2012.

Pursuant to the terms of the senior convertible note, the Company opted to pay the first five installment payments due prior to December 31, 2012 with shares of the Company’s common stock.  As of December 31, 2012, the Company issued 50,171,418 shares of common stock at a weighted average conversion price of $0.1095 for the first five installment payments prior to December 31, 2012 consisting of $5,000 principal and $440 of interest.

Interest expense on the convertible notes was $440 for the year ended December 31, 2012 and the Convertible Note (net of debt discount) was $2,365 as of December 31, 2012 as follows:
 
   
Convertible Note
   
Debt Discount
   
Net Total
 
                   
Beginning Balance - January 1, 2012
  $ -     $ -     $ -  
Original valuation - July 2, 2012
    12,000       (12,000 )     -  
Installment Payments in Shares
    (5,000 )     -       (5,000 )
Amortization
    -       7,365       7,365  
Ending Balance - December 31, 2012
  $ 7,000     $ (4,635 )   $ 2,365  
 
As of December 31, 2012, the Company re-valued the embedded derivatives under the senior convertible note with the Monte Carlo simulation model under the following assumptions; (i) expected life of 0.67 years, (ii) volatility of 144%, (iii) risk-free interest rate of 0.13%, and (iv) dividend rate of 0.  As of December 31, 2012, the embedded derivative was valued at $3,934 and the variance of $4,931 was recorded as a non-cash gain in change in value of embedded conversion feature liability for the year ended December 31, 2012.  The embedded derivatives are classified as embedded conversion feature liability in the consolidated balance sheet as follows:
 
   
December 31, 2012
 
       
Beginning Balance - January 1, 2012
  $ -  
Original valuation - July 2, 2012
    8,865  
Change in value of embedded conversion feature liability, gain
    (4,931 )
Ending Balance - December 31, 2012
  $ 3,934  
 

LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)
 
12. Warrant Liabilities
 
Pursuant to FASB ASC 815, the Company is required to report the value of certain warrants as a liability at fair value and record the changes in the fair value of the warrant liabilities as a gain or loss in its statement of operations and comprehensive loss due to the price-based anti-dilution rights of warrants.

As of December 31, 2011, 4,675,143 warrants were valued as liabilities under FASB ASC 815, and these warrants expired on January 3, 2012.  The Company valued the 4,675,143 warrants using the Black-Scholes valuation model and recorded $0 in warrant liabilities as of December 31, 2011.

During June 2012, the Company issued warrants to purchase a total of 15,000,000 shares to Visser under the Visser MTA Agreement (see note 3). These warrants have an exercise price of $0.22 per share and expire on June 1, 2017 and were originally valued at $4,260.  The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815.  As of December 31, 2012, these warrants were valued at $1,260 under the Black Sholes valuation model utilizing the following assumptions; (i) expected life of 4.42 years, (ii) volatility of 151%, (iii) risk-free interest rate of 0.72%, and (iv) dividend rate of 0.  The change in warrant valuation for these warrants for the year ended December 31, 2012 was a non-cash gain of $3,000 primarily as a result of the decrease in our stock price from $0.32 as of June 30, 2012 to $0.10 as of December 31, 2012.

On July 2, 2012, the Company issued warrants to purchase a total of 18,750,000 shares related to the July 2012 Private Placement (see note 3). These warrants have an exercise price of $0.384 per share and expire on July 2, 2017 and were originally valued at $5,053.  The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815.  As of December 31, 2012, these warrants were valued at $1,506 under the Black Sholes valuation model utilizing the following assumptions; (i) expected life of 4.50  years, (ii) volatility of 152%, (iii) risk-free interest rate of 0.72%, and (iv) dividend rate of 0.  The change in warrant valuation for the year ended December 31, 2012 was a non-cash gain of $3,547 primarily as a result of the decrease in our stock price from $0.32 as of June 30, 2012 to $0.10 as of December 31, 2012.

The following table summarizes the change in the Company’s warrant liability as of December 31, 2012:
 
   
Visser MTA
Agreement
   
July 2, 2012
Private Placement
   
Total
 
                   
Beginning Balance - January 1, 2012
  $ -     $ -       -  
Original valuation - June & July 2012
    4,260       5,053       9,313  
Change in value of warrant liability, gain
    (3,000 )     (3,547 )     (6,547 )
Ending Balance - December 31, 2012
  $ 1,260     $ 1,506     $ 2,766  
 
As of December 31, 2012 and 2011, the Company had 63,529,557 and 44,707,976 warrants outstanding, respectively, and of these, only 33,750,000 and 4,675,143 warrants, respectively, were valued as liabilities under FASB ASC 815.  As of December 31, 2012 and 2011, the Company valued the 33,750,000 and 4,675,143 warrants using the Black-Scholes model and recorded $2,766 and $0, respectively, in warrant liabilities.   The change in fair value of warrants resulted in a total non-cash gain of $6,547 and $1,328 for the years ended December 31, 2012 and 2011, respectively.

The fair value of warrants outstanding for the following periods was computed using the Black-Scholes model under the following assumptions:
 
   
December 31,
 
   
2012
   
2011
 
Expected life in years
    4.42 - 4.50       0.01  
Volatility
    151% - 152 %     82 %
Risk-free interest rate
    0.72 %     0.01 %
Dividend rate
    0       0  
 
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)
 
As of December 31, 2012, outstanding warrants to acquire shares of the Company’s common stock are as follows:
 
Number of Shares
 
Exercise Price
 
Expiration Date
         
208,334
 
$0.480
 
July 15, 2015
29,571,223
 
$0.490
 
July 15, 2015
15,000,000
 
$0.220
 
June 1, 2017
18,750,000
 
$0.384
 
July 2, 2017
63,529,557
       
 
13. Shareholders’ Equity (Deficit)

Common stock

During the year ended December 31, 2011, the Company issued 4,496,429 shares of common stock to settle a lawsuit with SAGA, a former joint venture partner in Italy (see note 10).

In June 2012, the Company issued 30,000,000 shares of common stock to Visser in connection with the Visser MTA Agreement (see note 3).

During the year ended December 31, 2012, the Company issued 50,171,418 shares of common stock at a weighted average conversion price of $0.1095 for the first five installment payments under the July 2012 Private Placement senior convertible note (see notes 3 and 11).

Preferred stock

On May 1, 2009, pursuant to a Securities Purchase and Exchange Agreement, the Company issued 500,000 shares of convertible Series A-1 Preferred Stock with an original issue price of $5.00 per share and 2,625,000 shares Series A-2 Preferred Stock with an original issue price of $5.00 per share as part of a financing transaction.

In connection with the Series A Preferred Stock issuance, the Company issued warrants to purchase 42,329,407 shares of the Company’s common stock at an exercise price of $0.50 per share, which was subsequently adjusted to $0.49 per share due to an anti-dilution calculation. The warrants expired on January 3, 2012.

In October 2009, the Company entered into an agreement with various investors to issue 180,000 shares of Series A-1 Preferred Stock with identical terms as the Series A-1 Preferred Stock issued on May 1, 2009.  In connection with this issuance, the Company issued warrants to purchase up to 4,500,000 shares of common stock with an exercise price of $0.50 per share, which was subsequently adjusted to $0.49 per share due to an anti-dilution calculation.  These warrants also expired on January 3, 2012.

The Series A Preferred Stock formerly accrued cumulative dividends at an annual rate of 8%, which were payable semi-annually.  On November 2, 2010, the Company filed an Amended and Restated Certificate of Designations, Preferences, and Rights (the "Amended Designation") for the Company's Series A Preferred Stock.  The Amended Designation was approved by the requisite vote of the holders of the Company's Series A Preferred Stock and was filed with the Delaware Secretary of State in accordance with a Consent Agreement entered into between the Company and the holders of 2/3 of the Series A Preferred Stock (the "Consent Agreement”).  The Amended Designation amended the terms of the Series A Preferred Stock by providing that (i) dividends ceased accruing thereon as of June 1, 2010, (ii) the liquidation preference and corresponding conversion value on the Series A Preferred Stock was increased from 1.0 to 1.08 of the sum of the issue price and accrued but unpaid dividends, (iii) the Series A Preferred Stock was now mandatorily convertible at any time at the option of the Company without condition, and (iv) the Series A Preferred Stock will no longer have any price-based anti-dilution rights.  The Consent Agreement provided that, in exchange for voting in favor of the Amended Designation, the warrants held by the holders signing the Consent Agreement (to the extent such warrants were issued in connection with the original issuance of the Series A Preferred Stock) would be extended to an expiration date of July 2015 and the price-based anti-dilution rights on such warrants were removed.  Additionally, the Company has the right at any time to redeem the Series A Preferred Stock in whole or in part upon not less than 30 days’ notice at a redemption price equal to the liquidation preference plus any accrued and unpaid dividends.

The Series A Preferred Stock and any accrued and unpaid dividends thereon is convertible, at the option of the holder of the Series A Preferred Stock, into common stock of the Company at a conversion price of $.10 per share in the case of the Series A-1 Preferred Stock and a conversion price of $.22 per share in the case of the Series A-2 Preferred Stock (in both cases subject to adjustments for any stock dividends, splits, combinations and similar events). As of December 31, 2012 and 2011, the Company had accrued dividends of $222 and $571, respectively.
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)

During the year ended December 31, 2012, the holders of the Company’s Series A Preferred Stock converted 792,215 shares of preferred stock into 25,669,752 shares of the Company’s common stock.  The Company had 105,231 and 246,371 shares of the Series A-1 Preferred Stock outstanding at December 31, 2012 and 2011, respectively.  The Company had 401,705 and 1,052,780 shares of the Series A-2 Preferred Stock outstanding at December 31, 2012 and 2011, respectively.

Warrants

The warrant holders who signed the Consent Agreement held warrants to purchase an aggregate of 40,032,833 shares of the Company’s common stock (the “Consent Warrants”).  As of November 2, 2010, the date of the Amended Designation, there were warrants to purchase 47,232,459 shares of the Company’s common stock outstanding. The Consent Warrants were initially recorded as liabilities on the Company’s consolidated financial statements in accordance with FASB ASC 815 due to their price-based anti-dilution rights.  Upon the removal of the anti-dilution rights with the Consent Agreement, the Consent Warrants no longer met the criteria under FASB ASC 815 and were reclassified as equity as of the date of the Amended Designation.  The Company reclassified $24,438 from warrant liabilities into equity on November 2, 2010, and this amount is reflected as Warrants in the consolidated statement of shareholders’ deficit as of December 31, 2011.  Warrants classified as equity was reduced to $18,179 as of December 31, 2012 as a result of the cashless exercise of warrants to purchase 10,253,276 shares of the Company’s common stock in April 2012.

As of December 31, 2012 and 2011, warrants to purchase 29,779,557 and 40,032,833 shares of the Company’s common stock, respectively, were classified as equity. All of such warrants expire on July 15, 2015.

14. Stock Compensation Plan

On April 4, 2002, our shareholders and board of directors adopted the 2002 Equity Incentive Plan (“2002 Plan”). The 2002 Plan provides for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries.  A total of 10,000,000 shares of our common stock may be granted under the 2002 Plan.  The 2002 Plan expired by its terms in April 2012, but it will remain in effect only with respect to the equity awards that have been granted prior to its expiration.  As of December 31, 2012, there were 3,392,000 options outstanding under the 2002 Plan.

On June 28, 2012, the Company adopted the 2012 Equity Incentive Plan (“2012 Plan”), with the approval of the shareholders, which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries.  The 2012 Plan provides for the granting to employees of incentive stock options within the meaning of Section 422 of the Internal Revenue Code of 1986, as amended, and for the granting to employees and consultants of non-statutory stock options. In addition, the Plan permits the granting of stock appreciation rights, or SARs, with or independently of options, as well as stock bonuses and rights to purchase restricted stock.  A total of thirty million shares of our common stock may be granted under the 2012 Equity Incentive Plan, and all options granted under this plan had exercise prices that were equal to the fair market value on the date of grant.  During 2012, the Company granted options to purchase 330,000 shares, and the same was outstanding as of December 31, 2012

FASB ASC 718, Compensation – Stock Compensation, requires all share-based payments to employees, including grants of employee stock options, to be recognized in the financial statements based on their fair values. Under ASC 718, Company is required to measure the cost of employee services received in exchange for stock options and similar awards based on the grant-date fair value of the award and recognize this cost in the income statement over the period during which an employee is required to provide service in exchange for the award.  The Company recorded $363 and $553 for the years ended December 31, 2012 and 2011, respectively, of non-cash charges for stock compensation related to amortization of the fair value of restricted stock and unvested stock options. The total compensation costs related to nonvested awards not yet recognized were $113 and $145 for the years ended December 31, 2012 and 2011, respectively.

On August 3, 2010, in conjunction with an employment agreement with Thomas Steipp, the Company’s Chief Executive Officer, the Company also granted an aggregate of 6,000,000 restricted shares of the Company’s common stock, which will ratably vest each year over five years.  During the years December 31, 2012 and 2011, the Company recorded $310 and $442, respectively, of compensation expense related to Mr. Steipp’s restricted shares.

The fair value of each option grant is estimated on the date of the grant using the Black-Scholes option-pricing model with the assumptions noted in the following table.
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)
 
   
December 31,
 
   
2012
   
2011
 
             
Expected volatility
    140.74% - 143.23 %     133.02% - 136.30 %
Expected dividends
    -       -  
Expected term (in years)
    6.50       6.50  
Risk-free rate
    0.98% - 1.04 %     2.56% - 2.87 %
 
Expected volatilities are based on historical volatility expected over the expected life of the options.  The Company uses historical data to estimate option exercise and employee termination within the valuation model. The expected term of options granted represents the period of time that options granted are expected to be outstanding.  Forfeitures rates  ranging from 5.0% to 28.3% were used for the year ended December 31, 2012 and 2011.  The risk free rate for period within the expected life of the options is based on U.S. Treasury rates in effect at the time of grant.

The following table summarizes the Company’s stock option transactions for the years ended December 31, 2012 and 2011:
 
   
Number of
Shares
   
Weighted Average
Exercise Price
   
Weighted
Average
Remaining
Contractual
Term
   
Aggregate Intrinsic Value
 
                     
(in thousands)
 
Options outstanding at December 31, 2010
    6,472,963       0.67              
Granted
    40,000       0.55              
Exercised
    (102,000 )     0.12              
Forfeited
    (400,000 )     0.50              
Expired
    (1,331,156 )     1.64              
Options outstanding at December 31, 2011
    4,679,807       0.42              
Granted
    330,000       0.28              
Exercised
    (354,000 )     0.12              
Forfeited
    (396,200 )     0.31              
Expired
    (537,607 )     1.00              
Options outstanding at December 31, 2012
    3,722,000     $ 0.36       6.2     $ 3  
Options exercisable at December 31, 2012
    1,866,000     $ 0.57       4.6     $ 2  
Options unvested at December 31, 2012
    1,856,000     $ 0.15       7.9     $ 1  
Options vested or expected to vest at December 31, 2012
    2,978,988     $ 0.41       5.8     $ 3  
 

LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)
 
The following table summarizes the Company’s stock options outstanding and exercisable by ranges of option prices as of December 31, 2012:
 
Options Outstanding
   
Options Exercisable
 
Range of
Exercise Prices
   
Numbers of
options
Outstanding
   
Weighted Average
Remaining Contractual
Life (Years)
   
Weighted
Average
Exercise Price
   
Number of
Options
Exercisable
   
Weighted Average
Remaining Contractual
Life (Years)
   
Weighted
Average
Exercise Price
 
           
 
                         
$ 0.00 - $ 3.00       3,712,000       6.11     $ 0.35       1,856,000       4.46     $ 0.55  
  3.01 - 6.00       10,000       0.32       4.57       10,000       0.32       4.57  
                                                     
Total
      3,722,000                       1,866,000                  
 
The Company’s non-vested options at the beginning and ending of fiscal year 2012 had a weighted-average grant-date fair value of $0.16 and $0.15 per option, respectively.

15.  Discontinued Operations and Long-Lived Assets to be Disposed Of

LMC

On December 20, 2011, the Company’s former majority owned subsidiary, Liquidmetal Coatings, LLC (“LMC”), entered into a transaction pursuant to which LMC issued and sold additional membership interests to a related party and to third-party investors for an aggregate purchase price of $3,000 (the “LMC Investment”).  The LMC Investment was entered into pursuant to a Membership Interest Purchase Agreement between the investors and LMC (the “Purchase Agreement”).  The investors in the LMC Investment were Rockwall Holdings, Inc. (“Rockwall”) and C3 Capital Partners, L.P. and C3 Capital Partners II, L.P. (the “C3 Entities”). The C3 Entities were minority investors in LMC prior to the transaction, and Rockwall is a company controlled by John Kang, a former Chief Executive Officer and Chairman of the Company.

The transactions contemplated by the Purchase Agreement were deemed to be effective as of November 30, 2011.  In connection with the LMC Investment, the Company and C3 Entities agreed to terminate a letter agreement, dated July 30, 2010, under which the Company would have been obligated to contribute additional capital to LMC if requested by LMC.  As a result of the LMC Investment and the termination of such letter agreement, the Company no longer has any contingent obligation to contribute additional capital to LMC and consequently the Company’s equity interest in LMC was reduced from approximately 72.86% to 0.67%.  However, the Company did not sell any of its own membership interests in LMC in the transaction.  As a result of the reduction in the Company’s percentage interest in LMC, the Company no longer consolidates LMC’s financial results with the Company’s financial results, and LMC’s financial results are included as discontinued operations for financial reporting purposes.  However, Ricardo Salas, the Company’s Executive Vice President and Board Member, will continue to serve as a member of LMC’s board of directors.

Summarized operating results of LMC’s discontinued operations are as follows:
 
   
December 31,
 
   
2012
   
2011
 
Revenue
  $ -     $ 9,732  
Gain on disposal of subsidiary, net
    -       11,227  
Loss from discontinued operations
    -       (335 )
 
The $11,227 gain on disposal of subsidiary was primarily due to write-off of LMC’s net liabilities.  Loss from discontinued operations represented the net operating loss of the subsidiary.

There were no balances as of December 31, 2011 due to the deconsolidation of LMC.

 

LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)
 
AMM
 
In June 2010, the Company created a wholly owned subsidiary, Advanced Metals Materials (“AMM”), in Weihei China as a holding company for certain assets that were acquired in China.  During the first quarter of 2011, AMM started production and manufacturing of certain bulk Liquidmetal alloys.  On August 5, 2011, the Company sold all of the stock of AMM to Innovative Materials Group, which is majority owned by John Kang, a former Chief Executive Officer and Chairman of the Company, for $720, of which $200 was paid in the form of a promissory note due August 5, 2012, bearing an interest rate of 8% per annum.  On December 31, 2012 IMG and the Company signed an agreement whereby the $200 Promissory Note along with the accrued interest was forgiven in exchange for the return of the eyewear license to the Company. The results of operations of AMM are included as discontinued operations for financial reporting purposes through August 5, 2011.

Summarized operating results of AMM’s discontinued operations are as follows:

   
December 31,
 
   
2012
   
2011
 
Revenue
  $ -     $ 200  
Gain on disposal of subsidiary, net
    -       370  
Loss from discontinued operations, net
    -       (370 )
 
The $370 gain on disposal of subsidiary was primarily due to $720 of proceeds less the write off net investment in AMM of $350.   Loss from discontinued operations represented the net operating loss of the subsidiary.

LMTK

In 2003, the Company set up a manufacturing plant in South Korea, Liquidmetal Technologies Korea (“LMTK”), to handle its bulk Liquidmetal alloys business which included manufacturing and selling components made out of bulk alloys.  During 2010 and prior years, LMTK experienced net losses and due to the uncertainty surrounding its future cash flows the Company re-evaluated its investment for recoverability. As a result, in November 2010, the Company decided to discontinue LMTK’s operations.  On December 1, 2011, the Company entered into a Share Purchase Agreement (the “Share Purchase Agreement”) with LMTK Holdings, Inc. (“LMTK Holdings”) to sell LMTK.  Under the Share Purchase Agreement, the Company sold all of LMTK’s shares of common stock to LMTK Holdings for an aggregate purchase price of one hundred dollars.  The results of operations of LMTK have been included as discontinued operations in the Company’s consolidated statements of operations and comprehensive loss through December 1, 2011.

Summarized operating results of LMTK’s discontinued operations are as follows:

   
December 31,
 
   
2012
   
2011
 
Revenue
  $ -     $ -  
Gain on disposal of subsidiary, net
    -       512  
Loss from discontinued operations
    -       (58 )
 
The $512 gain on disposal of subsidiary was primarily due to the net write-off of assets and foreign exchange accounts.  Loss from discontinued operations was primarily due to legal fees incurred for the sale of the subsidiary.

16. Income Taxes

Significant components of deferred tax assets are as follows:

   
Years Ended December 31,
 
   
2012
    2011  
             
Loss carry forwards
  $
60,426
    $
55,998
 
Debt discount     (1,523 )     --  
NQSO
    422       100  
Tax credit
    432       434  
Other
   
120
     
72
 
Total deferred tax asset
   
59,877
     
56,604
 
Valuation allowance
   
(59,877
)     (56,604 )
Total deferred tax asset, net
  $ --     $ --  
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)

The following table accounts for the differences between the expected federal tax benefit (based on the statutory U.S. federal income tax rate of 34%) and the actual tax provision:
 
   
Years Ended December 31,
 
   
2012
   
2011
 
             
             
Expected federal tax benefit
    (34 )%   (34 )%
               
Permanent Items
    0.1 %     8.9 %
                 
Net operating loss utilized or expired
    5.5 %     3.6 %
                 
Increase (decrease) in valuation allowance and others
    28.4 %      21.6 %
                 
Total tax provision
    0 %     0 %
 
As of December 31, 2012, the Company had approximately $126.5M of net operating loss (“NOL”) carryforwards for U.S. federal income tax purposes expiring in 2018 through 2032. In addition, the Company has State NOL carryforwards of approximately $100.4M expiring in 2013 through 2032. The Company and Liquidmetal Golf, Inc. filed on a separate company basis for federal income tax purposes. Accordingly, the federal NOL carryforwards of one legal entity are not available to offset federal taxable income of the other. Liquidmetal Golf, Inc. had approximately $35.6 in federal NOL carryforwards, expiring in 2018 through 2027.

As of December 31, 2012, the Company had approximately $189K of Research & Development (“R&D”) credit carryforwards for U.S. federal income tax purposes expiring in 2021 through 2030.  In addition, the Company has California R&D credit carryforwards of approximately $243K, which do not expire under current California law.

Section 382 of the Internal Revenue Code (“IRC”) imposes limitations on the use of NOL’s and credits following changes in ownership as defined in the IRC. The limitation could reduce the amount of benefits that would be available to offset future taxable income each year, starting with the year of an ownership change. The Company has not completed the complex analysis required by the IRC to determine if an ownership change has occurred.
     
The ability to realize the tax benefits associated with deferred tax assets, which includes benefits related to NOL’s, is principally dependent upon the Company’s ability to generate future taxable income from operations.  The Company has provided a full valuation allowance for its net deferred tax assets due to the Company’s net operating losses.

The Company adopted the provisions of FASB ASC Topic 470 – Income Taxes. At the adoption date and as of December 31, 2012, the Company had no material unrecognized tax benefits and no adjustments to liabilities or operations were required. The Company recognizes interest and penalties related to uncertain tax positions in income tax expense which were $0 for the year ended December 31, 2012 and 2011.

As of December 31, 2012, the tax years 2009 through 2011, and 2008 through 2011 are subject to examination by the federal and California taxing authorities, respectively. 

17. Income (Loss) Per Common Share

Basic earnings per share (“EPS”) is computed by dividing earnings (loss) attributable to common shareholders by the weighted average number of common shares outstanding for the periods. Diluted EPS reflects the potential dilution of securities that could share in the earnings.

Options to purchase 3,722,000 shares of common stock at process ranging from $0.09 to $5.00 per share were outstanding at December 31, 2012, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive.

16,896,073 shares of common stock issuable upon conversion of the company’s preferred stocks with conversion process between $0.10 and $0.22 per share outstanding at December 31, 2012 were not included in the computation of diluted EPS for the period as the inclusion would have been antidilutive.
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)
 
   
Years Ended December 31,
 
   
2012
   
2011
 
Amounts attributable to Liquidmetal Technologies, Inc. common
shareholders
           
             
Net income (loss)
    (14,025 )     6,155  
Net income (loss) available (attributable) to common stockholders
    (14,025 )     6,155  
                 
Basic income (loss) per share
    (0.07 )     0.05  
                 
Diluted income (loss) per share
    (0.07 )     0.03  
                 
Number of weighted average shares - basic
    188,298,113       118,523,228  
Number of weighted average shares - diluted
    188,298,113       163,292,496  
 
Basic and diluted net loss per common share was the same for the year ended December 31, 2012, as the impact of all potentially dilutive securities outstanding was anti-dilutive.  The following were outstanding at December 31, 2012 and were included in the computation of diluted EPS for the year ended December 31, 2012.
 
   
For the Years Ended December 31,
 
   
2012
   
2011
 
             
Weighted average basic shares
    188,298,113       118,523,228  
Effect of dilutive securities:
               
Stock options ("in the money")
    -       2,203,443  
Warrants ("in the money")
    -       -  
Conversion of preferred stocks and dividends
    -       42,565,825  
Weighted average diluted shares
    188,298,113       163,292,496  
 
18. Commitments and Contingencies

Operating Leases

The Company leases its offices and warehouse facilities under various lease agreements, certain of which are subject to escalations based upon increases in specified operating expenses or increases in the Consumer Price Index. As of December 31, 2012 and 2011, the Company has recorded $28 and $22, respectively, of deferred rent expenses.  Future minimum lease payments under non-cancelable operating leases during subsequent years are as follows:
 
   
Minimum
 
December 31,
 
Payments
 
       
2013
  $ 197  
2014
    221  
2015
    227  
2016
    77  
Total
  $ 722  
 
Rent expense was $214 and $225 for the years ended December 31, 2012 and 2011, respectively.

19.  401(k) Savings Plan

The Company has a tax-qualified employee savings and retirement plan, or 401(k) plan.  Under the U.S. based 401 (k) plan, participants may elect to reduce their current compensation, on a pre-tax basis, by up to 15% of their taxable compensation or of the statutorily prescribed annual limit, whichever is lower, and have the amount of the reduction contributed to the 401(k) plan. The 401(k) plan permits the Company, in its sole discretion, to make additional employer contributions to the 401(k) plan. However, the Company did not make employer contributions to the 401(k) plan during any of the periods presented in the accompanying consolidated financial statements.
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)

20.  Related Party Transactions

On August 1, 2010, the Company entered into an agreement with John Kang, a former Chief Executive Officer and Chairman of the Company, to provide consulting services.  The Company terminated this agreement as of July 31, 2011.  The Company incurred $0 and $210 for his services during the years ended December 31, 2012 and 2011, respectively.

On October 14, 2010, the Company signed an agreement with Innovative Materials Group, LLC (“IMG”), a California limited liability company, which is majority owned by Mr. Kang.  Under the agreement, the Company received a deposit of $520 from IMG to purchase on behalf of IMG, machinery and equipment located in China.  The transaction was based on the potential negotiation and completion of a non-exclusive license agreement with IMG under which the machinery and equipment would be transferred to IMG either directly or through the transfer of ownership of the Company’s Chinese subsidiary, Advanced Metals Materials (“AMM”), that owns the equipment.

On August 5, 2011, the Company signed a Stock Purchase Agreement (the “Stock Purchase Agreement”) with IMG to sell all of the stock of AMM for $720 (the “Purchase Price”). IMG applied the payment of the Purchase Price the $520 deposit previously paid to the Company and the $200 balance of the Purchase Price was paid in the form of a Promissory Note due August 5, 2012, bearing an interest rate of 8% per annum. In conjunction with the Stock Purchase Agreement, the Company also entered into a License Agreement (the “IMG License Agreement”) with IMG to license certain patents and technical information for the limited purpose of manufacturing certain licensed products with the Company’s existing first generation, die cast machines, as defined by the IMG License Agreement (the “Licensed Products”).  The IMG License Agreement grants a non-exclusive license to certain product categories, as well as an exclusive license to specific types of consumer eyewear products and obligates IMG to pay the Company a running royalty based on its sales of Licensed Products.  The license will expire on August 5, 2021.  The Company recognized $26 and $19 in royalty revenues from IMG during the years ended December 31, 2012 and 2011, respectively.

On December 31, 2012, IMG and the Company signed an amendment to the IMG License Agreement whereby the $200 Promissory Note from IMG along with the accrued interest of $21 was forgiven in exchange for the return of the eyewear license to the Company.  The Company accounted for this transaction as an exchange of non-monetary assets and re-classed the $221 thousand to eyewear license fee. While the Company continues to maintain an active interest in leveraging the eyewear license for prospective opportunities in the eyewear industry from both a products and licensing perspective, the Company determined that there was insufficient historical market data on the potential license applications presently available to provide a reasonable basis to fair value the license and its period of useful life. Therefore, the Company recognized a $221 thousand impairment loss for accounting purposes as of December 31, 2012.

On December 20, 2011, Rockwall Holdings, Inc., a company controlled by Mr. Kang, entered into a transaction as one of the primary investors in Liquidmetal Coatings, LLC (“LMC”), our former subsidiary (see note 15).

During the years ended December 31, 2012 and 2011, the Company incurred $2 and $154 in legal fees, respectively, to defend Mr. Kang, as the former Representative Director of our Korean subsidiary, against allegations relating to the Company’s Korean subsidiary’s involvement in customs reporting violations in South Korea that allegedly occurred in 2007 and 2008. The Company had agreed to reimburse Mr. Kang’s legal fees incurred on this issue through December 31, 2012.

In October 2009, Thomas Steipp, the Company’s President and Chief Executive Officer, Ricardo Salas, the Company’s Executive Vice President and Director, Tony Chung, the Company’s Chief Financial Officer, and Mr. Kang acquired a total of 100,000 shares of the Company’s Series A-1 Preferred Stock and warrants to purchase 2,500,000 shares of the Company’s common stock for an aggregate cash price of $495.  The Series A-1 Preferred Stock is convertible into the Company’s common stock at a conversion price of $0.10 per common share.  Furthermore, the warrants can be exercised for shares of the Company’s common stock at an exercise price of $0.49 per share and will expire on July 31, 2015. In April 2011, Mr. Steipp converted his 20,000 shares of Series A-1 Preferred Stock into a total of 1,130,688 shares of the Company’s common stock, including dividends received in the form of common stock.  In July 2011, Mr. Salas and Mr. Kang converted 50,000 and 19,000 respective shares of Series A-1 Preferred Stock into a total of 2,826,720 and 1,074,154 shares of the Company’s common stock, respectively, including dividends received in the form of common stock.  On February 1, 2012, Mr. Chung converted his 10,000 shares of Series A-1 Preferred Stock into a total of 565,344 shares of the Company’s common stock, including dividends received in the form of common stock.
 
 
LIQUIDMETAL TECHNOLOGIES, INC AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Years Ended December 31, 2012 and 2011
(in thousands, except share and per share data)

The Company has an exclusive license agreement with LLPG, Inc. (“LLPG”), a corporation owned principally by Jack Chitayat, former director of the Company who ceased to be director in 2005.  Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG.    The exclusive license agreement with LLPG expires on December 31, 2021.  There were no revenues recognized from product sales and licensing fees from LLPG during the years ended December 31, 2012 and 2011.  As of December 31, 2012, Mr. Chitayat is a greater-than-5% beneficial owner of the Company.

On August 3, 2010, Tom Steipp received 6,000,000 restricted shares of the Company’s stock as part of his employment agreement with the Company.  These shares shall vest annually in 20% increments on each anniversary date of the employment agreement.  On July 27, 2011, the employment agreement was amended to defer the first anniversary vesting date from August 3, 2011 to December 15, 2011.  On July 31, 2012, the employment agreement was amended to defer the second anniversary vesting date from August 3, 2012 to December 15, 2012.

On June 1, 2012, the Company entered into a Master Transaction Agreement with Visser Precision Cast, LLC relating to a strategic transaction for manufacturing services and financing (see note 3).  As of December 31, 2012, Visser is a greater-than-5% beneficial owner of the Company.
 
 
72