Form 20-F
Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 


FORM 20-F

 


(Mark One)

¨ Registration statement pursuant to Section 12(b) or 12(g) of the Securities Exchange Act of 1934

or

 

x Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the fiscal year ended December 31, 2006

or

 

¨ Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

or

 

¨ Shell company report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

Commission file number: 001-327734

TERNIUM S.A.

(Exact Name of Registrant as Specified in its Charter)

N/A

(Translation of registrant’s name into English)

Grand Duchy of Luxembourg

(Jurisdiction of incorporation or organization)

46a, Avenue John F. Kennedy—2nd floor

L-1855 Luxembourg

(Address of registrant’s principal executive offices)

 


Securities registered or to be registered pursuant to Section 12(b) of the Act:

 

Title of Each Class

 

Name of Each Exchange On Which Registered

American Depositary Shares   New York Stock Exchange
Ordinary Shares, par value USD1.00 per share   New York Stock Exchange*

 


* Ordinary shares of Ternium S.A. are not listed for trading but only in connection with the registration of American Depositary Shares which are evidenced by American Depositary Receipts.

 


Securities registered or to be registered pursuant to Section 12(g) of the Act:

None

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act:

None

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report.

2,004,743,442 ordinary shares, par value USD1.00 per share

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes    ¨                    No    x

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.

Yes    ¨                    No    x

Note—checking the box above will not relieve any registrant required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 from their obligations under those Sections.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes    x                    No    ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act (Check one):

Large accelerated filer    ¨            Accelerated Filer    ¨            Non-accelerated filer    x

Indicate by check mark which financial statement item the registrant has elected to follow.

Item 17    ¨                    Item 18    x

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes    ¨                    No    x

Please send copies of notices and communications from the Securities and Exchange Commission to:

 

Cristián J.P. Mitrani

Mitrani Caballero Ojam Abogados

Alicia Moreau de Justo 400, 3 rd Floor

C1007AAH—Buenos Aires, Argentina

(54-11) 4590-8600

 

Carlos J. Spinelli-Noseda, Esq.

Sullivan & Cromwell LLP

125 Broad Street

New York, New York 10004

(212) 558-4000

 


 


Table of Contents

TABLE OF CONTENTS

 

PART I         6
    Item 1.    Identity of Directors, Senior Management and Advisers    6
    Item 2.    Offer Statistics and Expected Timetable    6
    Item 3.    Key Information    6
    Item 4.    Information on the Company    23
    Item 4A.    Unresolved Staff Comments    58
    Item 5.    Operating and Financial Review and Prospects    58
    Item 6.    Directors, Senior Management and Employees    83
    Item 7.    Major Shareholders and Related Party Transactions.    94
    Item 8.    Financial Information    97
    Item 9.    The Offer and Listing    99
    Item 10.    Additional Information    100
    Item 11.    Quantitative and Qualitative Disclosures About Market Risk    111
    Item 12.    Description of Securities Other Than Equity Securities    115
PART II       116
    Item 13.    Defaults, Dividend Arrearages and Delinquencies    116
    Item 14.    Material Modifications to the Rights of Security Holders and Use of Proceeds    116
    Item 15.    Controls and Procedures    116
    Item 16A.    Audit Committee Financial Expert    116
    Item 16B.    Code of Ethics    116
    Item 16C.    Principal Accountant Fees and Services    117
    Item 16D.    Exemptions from the Listing Standards for Audit Committees    118
    Item 16E.    Purchases of Equity Securities by the Issuer and Affiliated Purchasers    118
PART III       118
    Item 17.    Financial Statements    118
    Item 18.    Financial Statements    118
    Item 19.    Exhibits    119

 

i


Table of Contents

CERTAIN DEFINED TERMS

In this annual report, unless otherwise specified or if the context so requires:

 

   

References to “the Company”, “we”, “us” or “our” are exclusively to Ternium S.A., a joint stock corporation (société anonyme holding) organized under the laws of the Grand Duchy of Luxembourg;

 

   

References to “Ternium” refer to the flat and long steel manufacturing, processing and distribution businesses of various companies under the common control of San Faustín N.V. As part of a corporate reorganization, these companies were reorganized as our subsidiaries. See notes 1 and 2 to our consolidated financial statements included elsewhere in this annual report and Item 4. “Information on the Company—History and Corporate Organization”;

 

   

References to “Siderar” are to Siderar S.A.I.C., a corporation (sociedad anónima industrial y comercial) organized under the laws of the Republic of Argentina (“Argentina”) and a subsidiary of the Company;

 

   

References to “Amazonia” refer to Consorcio Siderurgia Amazonia Ltd., a holding company organized under the laws of the Cayman Islands and a subsidiary of the Company that holds a 59.73% interest in Sidor;

 

   

References to “Sidor” are to Sidor C.A., a corporation (compañía anónima) organized under the laws of the Bolivarian Republic of Venezuela (“Venezuela”) and a subsidiary of the Company;

 

   

References to “Hylsamex” are to Hylsamex, S.A. de C.V., a corporation (sociedad anónima de capital variable) organized under the laws of the United Mexican States (“Mexico”) and a subsidiary of the Company;

 

   

References to “Ylopa” are to Ylopa Serviços de Consultadoría Lda., a company established under the laws of Portugal and registered in the Madeira Free Zone;

 

   

References to “the Ternium companies” are to Ternium’s manufacturing subsidiaries, namely Siderar, Sidor and Hylsamex and their respective subsidiaries;

 

   

References to “Usiminas” are to Usinas Siderurgicas de Minas Gerais S/A—USIMINAS, a company organized under the laws of Brazil and a shareholder of the Company;

 

   

References to “Tenaris” are to Tenaris S.A., a joint stock corporation (société anonyme holding) organized under the laws of Luxembourg and a shareholder of the Company;

 

   

References to “ISL” are to Inversora Siderurgica Limited, a company organized under the laws of Gibraltar and the Company’s principal direct shareholder;

 

   

References to “San Faustín” are to San Faustín N.V., a corporation organized under the laws of the Netherlands Antilles and the Company’s indirect controlling shareholder;

 

   

References to the “Ternium internacional commercial network”, the “Ternium network” or “Ternium Internacional” are to an international group of companies, formerly known as Techintrade or the Techintrade network, that markets and provides worldwide distribution services for products offered primarily by Ternium.

 

   

References to “ADSs” are to the American Depositary Shares which are evidenced by American Depositary Receipts;

 

   

References to “tons” are to metric tons; one metric ton is equal to 1,000 kilograms, 2,204.62 pounds or 1.102 U.S. (short) tons; and

 

   

References to “billions” are to thousands of millions, or 1,000,000,000.

 

1


Table of Contents

PRESENTATION OF CERTAIN FINANCIAL AND OTHER INFORMATION

Accounting Principles

We prepare our consolidated financial statements in conformity with International Financial Reporting Standards, or IFRS. IFRS differ in certain significant respects from generally accepted accounting principles in the United States, commonly referred to as U.S. GAAP. See note 34 to our audited consolidated financial statements included in this annual report, which provides a description of the principal differences between IFRS and U.S. GAAP as they relate to the Company and a reconciliation of net income and shareholders’ equity for the years and at the dates indicated.

Our audited consolidated financial statements as of, and for the years ended December 31, 2006, 2005 and 2004 included in this annual report consolidate, in addition to the consolidated results and other financial data of Siderar, Ylopa, and Ternium Internacional, the results and other financial data of Amazonia and Hylsamex, which companies came under the control of San Faustín on February 15, 2005 and August 22, 2005, respectively. As a result of the consolidation of Amazonia’s and Hylsamex’s results and other financial data, Ternium’s results and other financial data for the year ended December 31, 2006 varied significantly from the results and other financial data for the years ended December 31, 2005 and 2004. For a list of our subsidiaries, see note 2 to our audited consolidated financial statements included in this annual report. For comparative purposes, the audited combined consolidated financial data of Ternium as of December 31, 2005 and 2004 and for the years then ended included in this annual report combine and consolidate the results and other financial data of each of Siderar, Ylopa and Ternium Internacional, and recognize the investment in Amazonia under the equity method, as of each such dates and for each of the years then ended, on the basis that such companies were under the common control of San Faustín as of each such dates and for each such years. The effect of this presentation is to show the combined historical results, financial condition and other data of the various companies under the common control of San Faustín as though these companies had been our subsidiaries at the dates and during the periods presented. For more information, see notes 1, 2 and 3 to our audited consolidated financial statements included in this annual report.

 

2


Table of Contents

Currencies

In this annual report, unless otherwise specified or the context otherwise requires:

 

   

“dollars”, “U.S. dollars” or “USD” each refers to the United States of America dollar;

 

   

“€”, “EUR” or “euros” each refers to the Euro;

 

   

“Argentine pesos” or “ARP” each refers to the Argentine peso;

 

   

“Venezuelan bolívares” or “VEB” each refers to the Venezuelan bolívar; and

 

   

“Mexican pesos” or “MXN” each refers to the Mexican peso.

On December 29, 2006, the exchange rate between the Argentine peso and the U.S. dollar (as published by Banco Central de la República Argentina, or the Argentine Central Bank), was ARP3.0695=USD1.00; the noon buying rate for the Venezuelan bolívar as certified for customs purposes by the Federal Reserve Bank of New York was VEB2,144.60=USD1.00; and the noon buying rate for the Mexican peso as published by the Federal Reserve Bank of New York was MXN10.7995=USD1.00. Those rates may differ from the actual rates used in preparation of Ternium’s consolidated financial statements. We do not represent that any of these currencies could have been or could be converted into U.S. dollars or that the U.S. dollars could have been or could be converted into any of these currencies.

Rounding; Comparability of Data

Certain monetary amounts, percentages and other figures included in this annual report have been subject to rounding adjustments. Accordingly, figures shown as totals in certain tables may not be the arithmetic aggregation of the figures that precede them, and figures expressed as percentages in the text may not total 100% or, as applicable, when aggregated may not be the arithmetic aggregation of the percentages that precede them.

Our Internet Site is Not Part of This Annual Report

We maintain an Internet site at www.ternium.com. Information contained in or otherwise accessible through this website is not a part of this annual report. All references in this annual report to these Internet sites are inactive textual references to these URLs, or “uniform resource locators” and are for your informational reference only. We assume no responsibility for the information contained on these sites.

 

3


Table of Contents

CAUTIONARY STATEMENT CONCERNING FORWARD-LOOKING STATEMENTS

This annual report and any other oral or written statements made by us to the public may contain “forward-looking statements” within the meaning of and subject to the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. This annual report contains forward-looking statements, including with respect to certain of our plans and current goals and expectations relating to Ternium’s future financial condition and performance.

Sections of this annual report that by their nature contain forward-looking statements include, but are not limited to, Item 3. “Key Information,” Item 4. “Information on the Company,” Item 5. “Operating and Financial Review and Prospects” and Item 11. “Quantitative and Qualitative Disclosures About Market Risk.”

We use words such as “aim,” “will likely result,” “will continue,” “contemplate,” “seek to,” “future,” “objective,” “goal,” “should,” “will pursue,” “anticipate,” “estimate,” “expect,” “project,” “intend,” “plan,” “believe” and words and terms of similar substance to identify forward-looking statements, but they are not the only way we identify such statements. All forward-looking statements are management’s present expectations of future events and are subject to a number of factors and uncertainties that could cause actual results to differ materially from those described in the forward-looking statements. In addition to the risks related to Ternium’s business discussed under Item 3. “Key Information—D. Risk Factors,” other factors could cause actual results to differ materially from those described in the forward-looking statements. These factors include, but are not limited to:

 

   

our ability to successfully implement our business strategy;

 

   

our ability to successfully integrate the operations of future acquisitions (for example, Grupo Imsa) into the operations of Ternium;

 

   

uncertainties about the degree of growth in the number of consumers in the markets in which Ternium operates and sells its products;

 

   

the impact of existing and new competitors in the markets in which Ternium operates, including competitors that may effect Ternium’s customer mix, profitability and revenue and/or offer less expensive products and services, desirable or innovative products, or have extensive resources or better financing;

 

   

other factors or trends affecting the flat and long steel industry generally and our financial condition in particular;

 

   

general economic and political conditions in the countries in which Ternium operates or other countries which have an impact on Ternium’s business activities or investments;

 

   

the monetary and interest rate policies of the countries in which Ternium operates;

 

   

inflation or deflation in the countries in which Ternium operates;

 

   

unanticipated volatility in interest rates;

 

   

foreign exchange rates;

 

   

the performance of the financial markets globally and in the countries in which Ternium operates;

 

   

changes in domestic and foreign laws, regulations and taxes;

 

   

changes in competition and the pricing environments in the countries in which Ternium operates;

 

   

regional or general changes in asset valuations; and

 

4


Table of Contents
   

raw material and energy price increases or difficulties in acquiring raw materials or energy supply cut-offs.

By their nature, certain disclosures relating to these and other risks are only estimates and could be materially different from what actually occurs in the future. As a result, actual future gains or losses that may affect Ternium’s financial condition and results of operations could differ materially from those that have been estimated. You should not place undue reliance on the forward-looking statements, which speak only as of the date of this annual report. Except as required by law, we are not under any obligation, and expressly disclaim any obligation, to update or alter any forward-looking statements, whether as a result of new information, future events or otherwise.

 

5


Table of Contents

PART I

 

Item 1. Identity of Directors, Senior Management and Advisers

Not applicable.

 

Item 2. Offer Statistics and Expected Timetable

Not applicable.

 

Item 3. Key Information

A. Selected Financial Data

The selected consolidated financial data set forth below have been derived from our audited consolidated financial statements for each of the years and at the dates indicated. Our consolidated financial statements were prepared in accordance with IFRS and were audited by Price Waterhouse & Co. S.R.L., Argentina, an independent registered public accounting firm and a member firm of PricewaterhouseCoopers. IFRS differ in certain significant respects from U.S. GAAP. See note 34 to our audited consolidated financial statements included in this annual report, which provide a description of the principal differences between IFRS and U.S. GAAP as they relate to the Company and a reconciliation to U.S. GAAP of net income and shareholders’ equity for the years and at the dates indicated therein.

The audited consolidated financial statements of Ternium as of December 31, 2006, 2005 and 2004 and for the years then ended included in this annual report consolidate, in addition to the consolidated results and other financial data of each of Siderar, Ylopa and Ternium Internacional, the results and other financial data of Amazonia and Hylsamex, which companies came under the control of San Faustín on February 15, 2005 and on August 22, 2005, respectively. As a result of the consolidation of Amazonia’s and Hylsamex’s results and other financial data, Ternium’s results and other financial data for the year ended December 31, 2006 varied significantly from the results and other financial data for the years ended December 31, 2005 and 2004. The audited combined consolidated financial data of Ternium as of December 31, 2005 and 2004 and for the years then ended included in this annual report combine and consolidate the results and other financial data of each of Siderar, Ylopa and Ternium Internacional, and recognize the investment in Amazonia under the equity method, as of each such dates and for each of the years then ended, on the basis that such companies were under the common control of San Faustín as of each such dates and for each such years. The effect of this presentation is to show the combined historical results, financial condition and other data of the various companies under the common control of San Faustín as though these companies had been our subsidiaries at the dates and during the years presented. For more information, see notes 1, 2 and 3 to our audited consolidated financial statements included in this annual report. For a discussion of the currencies used in this annual report, exchange rates and accounting principles affecting the financial information contained in this annual report, see “Presentation of Certain Financial and Other Information—Accounting Principles” and “Currencies.”

 

6


Table of Contents

In thousands of U.S. dollars

(except number of shares and per share data)

   For the year ended December 31,  
   2006     2005(1) (2)     2004(1) (2)     2003(1) (2)  

Selected consolidated income statement data

        

IFRS

        

Net sales

   6,568,975     4,447,680     1,598,925     1,056,566  

Cost of sales

   (4,301,384 )   (2,488,980 )   (965,004 )   (671,720 )
                        

Gross profit

   2,267,591     1,958,700     633,921     384,846  

Selling, general and administrative expenses

   (623,772 )   (500,590 )   (116,626 )   (115,662 )

Other operating expenses, net

   (7,250 )   (65,949 )   (3,124 )   (4,402 )
                        

Operating income

   1,636,569     1,392,161     514,171     264,782  
                        

Interest expense

   (112,918 )   (81,608 )   (18,257 )   (39,980 )

Interest income

   52,554     32,324     8,911     6,036  

Other financial (expenses) income, net

   (322,417 )   (261,452 )   211,635     109,550  

Excess of fair value of net assets acquired over cost

   —       188,356     —       —    

Equity in earnings of associated companies

   4,534     21,524     209,201     110,250  
                        

Income before income tax expense

   1,258,322     1,291,305     925,661     450,638  

Income tax expense

   (262,356 )   (218,492 )   (177,486 )   (94,087 )
                        

Net income for the year(3)

   995,966     1,072,813     748,175     356,551  

Attributable to:

        

Equity holders of the Company

   795,424     704,406     457,339     218,215  

Minority interest

   200,542     368,407     290,836     138,336  
                        
   995,966     1,072,813     748,175     356,551  
                        

Depreciation and amortization

   424,495     316,405     99,192     85,479  

Weighted average number of shares outstanding(4)

   1,936,833,060     1,209,476,609     1,168,943,632     1,168,943,632  

Basic earnings per share for profit attributable to the equity holders of the Company(4)

   0.41     0.58     0.39     0.19  

Diluted earnings per share for profit attributable to the equity holders of the Company(5)

   0.41     0.54     0.39     0.19  

Dividends per share declared(6)

   0.05     —       —       —    

U.S. GAAP

        

Net sales

   6,568,975     4,447,680     1,598,925     1,056,566  

Net income for the year(7)

   841,018     559,305     424,655     264,173  

Weighted average number of shares outstanding(4)

   1,936,833,060     1,209,476,609     1,168,943,632     1,168,943,632  

Basic earnings per share for profit attributable to the equity holders of the Company(4)

   0.43     0.46     0.36     0.23  

Diluted earnings per share for profit attributable to the equity holders of the Company(5)

   0.43     0.43     0.36     0.23  

(1) Combined consolidated financial information on the basis of common control. See note 2 to our audited consolidated financial statements.
(2) Certain comparative amounts for 2005, 2004 and 2003 have been reclassified to conform to changes in presentation in the current period.
(3) For IFRS purposes, net income for the year is shown gross of the interest of minority shareholders in controlled subsidiaries. The portion of net income attributable to the equity holders of the Company and to minority shareholders is disclosed separately. Under U.S. GAAP, net income for the year is shown net of minority interest.
(4) As discussed in note 29 to our audited consolidated financial statements, in October 2005, Usiminas exchanged its 5.3% equity interest in Siderar, its 16.6% equity interest in Amazonia and its 19.1% equity interest in Ylopa and other items for 227,608,254 new shares of the Company. Upon the consummation of this exchange, capital increased to USD1,396.6 million, represented by 1,396,551,887 shares of USD1.00 nominal value each. Pursuant to certain provisions contained in a subordinated convertible loan agreement, on February 6, 2006 the Company exchanged certain subordinated convertible loans (including interest accrued through January 31, 2006) held by ISL and converted them into shares at a conversion price of USD2 per share, resulting in the issuance of 302,962,261 new shares on February 9, 2006. As provided in the Corporate Reorganization Agreement, on February 9, 2006, ISL contributed all of its assets and liabilities (including its interest in Amazonia) to the Company in exchange for 959,482,775 newly-issued shares of the Company after the settlement of its initial public offering. In connection with the over-allotment described in note 1 to our audited consolidated financial statements, on March 1, 2006, the Company issued 22,981,360 new shares. Upon consummation of the transactions discussed above, as of December 31, 2006, the capital of the Company was increased to USD2,004.7 million, represented by 2,004,743,442 shares, each having a nominal value of USD1.00. Ternium’s combined earnings per share for the year ended December 31, 2004 and 2003 have been calculated based on the assumption that 1,168,943,632 shares were issued and outstanding in each of the periods presented. For fiscal years 2006 and 2005, the weighted average of shares outstanding totaled 1,936,833,060 shares and 1,209,476,609 shares, respectively.
(5) Diluted earnings per share have been calculated giving effect to the conversion of the Subordinated Convertible Loans. See note 1 to our audited consolidated financial statements.
(6) On June 6, 2007, at the Ternium’s annual general shareholders meeting a dividend of USD0.05 per share (USD0.50 per ADS), or approximately USD100 million, was approved. Ternium paid the dividend on June 12, 2007.
(7) We are not presenting net income from continuing operations since it is identical to net income for all periods presented.

 

7


Table of Contents

In thousands of U.S. dollars

(except number of shares and per share data)

   At December 31,
   2006    2005(2)    2004(1) (2)    2003(1)

Selected consolidated balance sheet data

           

IFRS

           

Non-current assets

   6,117,284    6,116,423    1,728,410    1,610,810

Property, plant and equipment, net

   5,420,683    5,463,871    1,244,691    1,275,699

Other non-current assets(3)

   696,601    652,552    483,719    335,111

Current assets

   2,653,255    2,543,558    918,220    576,078

Cash and cash equivalents

   643,352    765,630    194,875    129,020

Other current assets

   2,002,861    1,774,768    723,345    447,058

Non-current assets classified as held for sale

   7,042    3,160    —      —  

Total assets

   8,770,539    8,659,981    2,646,630    2,186,888

Capital and reserves attributable to the Company’s equity holders(4)

   3,757,558    1,842,454    1,026,725    701,821

Minority interest

   1,729,583    1,733,465    745,126    550,264

Non-current liabilities

   1,875,894    3,691,288    359,510    677,649

Borrowings

   548,401    2,399,878    1,008    283,914

Deferred income tax

   985,155    1,048,188    337,473    374,907

Other non-current liabilities

   342,338    243,222    21,029    18,828

Current liabilities

   1,407,504    1,392,774    515,269    257,154

Borrowings

   508,694    516,399    121,998    80,238

Other current liabilities

   898,810    876,375    393,271    176,916

Total liabilities

   3,283,398    5,084,062    874,779    934,803

Total equity and liabilities

   8,770,539    8,659,981    2,646,630    2,186,888

Number of shares outstanding(5)

   2,004,743,442    1,396,551,886    1,168,943,632    1,168,943,632

U.S. GAAP

           

Total assets

   8,181,931    7,938,086    2,115,271    1,201,734

Non-current liabilities

   1,938,505    3,699,842    44,647    311,054

Total shareholders’ equity

   3,435,516    1,436,638    954,255    382,703

(1) Combined consolidated financial information on the basis of common control. See note 2 to our audited consolidated financial statements.
(2) Certain comparative amounts for 2005 and 2004 have been reclassified to conform to changes in presentation in the current period.
(3) As of December 31, 2006 and 2005, includes goodwill related to the acquisition of Hylsamex for a total amount of USD397.9 million and USD399.7 million, respectively. See note 3(e) to our audited financial statements.
(4) The Company’s common stock as of December 31, 2006, 2005, 2004 and 2003 was represented by 2,004,743,442, 1,396,551,887, 1,168,943,632 and 1,168,943,632, par value USD1.00 per share, for a total amount of USD2,004.7 million, USD1,396.6 million, USD1,168.9 million and USD1,168.9 million, respectively.
(5) As described in note 29 to our audited consolidated financial statements, after the completion of the Company’s initial public offering, the conversion of the subordinated convertible loans, the exercise of the over-allotment option granted to the underwriters of the initial public offering and the consummation of the transactions contemplated in the Corporate Reorganization Agreement, 2,004,734,442 shares were outstanding. In October 2005, Usiminas exchanged its 5.3% equity interest in Siderar, its 16.6% equity interest in Amazonia and its 19.1% equity interest in Ylopa and other items for 227,608,254 new shares of the Company. Upon the consummation of this exchange, capital increased to USD1,396.6 million, represented by 1,396,551,887 shares of USD1.00 nominal value per share. Pursuant to certain provisions contained in a subordinated convertible loan agreement, on February 6, 2006 the Company exchanged certain subordinated convertible loans (including interest accrued through January 31, 2006) held by ISL and converted them into shares at a conversion price of USD2 per share, resulting in the issuance of 302,962,261 new shares on February 9, 2006. As provided in the Corporate Reorganization Agreement, on February 9, 2006, ISL contributed all of its assets and liabilities (including its interest in Amazonia) to the Company in exchange for 959,482,775 newly-issued shares of the Company after the settlement of its initial public offering. In connection with the over-allotment described in note 1 to our audited consolidated financial statements, on March 1, 2006, the Company issued 22,981,360 new shares. Upon consummation of the transactions discussed above, as of December 31, 2006, the capital was increased to USD2,004.7 million, represented by 2,004,743,442 shares, each having a nominal value of USD1.00.

B. Capitalization and Indebtedness

Not applicable.

 

8


Table of Contents

C. Reasons for the Offer and Use of Proceeds

Not applicable.

D. Risk Factors

You should carefully consider the risks and uncertainties described below, together with all other information contained in this annual report, before making any investment decision. Any of these risks and uncertainties could have a material adverse effect on our business, financial condition and results of operations, which could in turn affect the price of the Company’s shares and ADSs.

Risks Relating to the Steel Industry

The demand for Ternium’s products is cyclical.

The steel industry is highly cyclical in nature and is characterized by intense competition. The financial condition and results of operations of steel companies are generally affected by various factors, including fluctuations in gross domestic product, related market demand, global production capacity, tariffs, cyclicality in the industries that purchase steel products and other factors beyond Ternium’s control. The demand for and prices of Ternium’s products are directly affected by these fluctuations. For example, the Ternium companies depend on construction activity within their primary markets for a large proportion of their sales. Construction activity is cyclical and significantly affected by changes in global and local economic conditions. A prolonged recession in the construction sector, or in any of the other industry sectors that purchase Ternium’s products, in Argentina, Venezuela or Mexico, where most of Ternium’s operations are conducted and domestic sales are targeted, could result in a significant decrease in Ternium’s operational and sales performance. In addition, like other manufacturers of steel-related products, the Ternium companies have fixed and semi-fixed costs that cannot adjust rapidly to fluctuations in the demand for their products. If demand for Ternium’s products falls significantly, the impossibility of rapidly adjusting these costs could adversely affect Ternium’s profitability.

Like other steel companies, Ternium is vulnerable to events affecting the steel industry as a whole, such as imbalances between supply and demand. For example, the impact of new production facilities could result in imbalances between supply and demand. Moreover, due to high start-up costs, the economics of operating a steel mill continuously could encourage mill operators to maintain high levels of output, even in times of low demand, which exacerbates the pressures on industry profit margins. Although the demand for steel has grown in recent years, the world steel industry has been affected in the past by generally sluggish demand and substantial excess worldwide steel production. As a result of the general excess capacity in the industry, the world steel industry was subject to substantial downward pricing pressure, which negatively impacted the results of steel companies in the second half of 2000 and the entire year of 2001. For example, as a result of these adverse trends, Sidor experienced significant financial losses and consequently restructured its debt in 2000 and again in 2003. International steel prices generally improved beginning in 2003. However, this new period of high prices for steel has encouraged reactivation of and investment in production capacity and, consequently, oversupply has led to a decline in steel prices beginning in the last quarter of 2004 and continuing through 2005. Nevertheless, prices in 2005 reached generally higher levels than those prevailing in 2001 through 2003. Steel prices began to recover in 2006, exceeding those of 2005, as a result of better global economic performance, but slightly decreasing towards the second half of the year. If an event occurs that has a negative effect on the steel industry, such as excess production capacity or increased competition in the main steel markets, Ternium’s ability to expand sales and increase production in general will be constrained, and as a result, it may not be able to maintain its recent rate of growth in revenues. Furthermore, due to the highly cyclical nature of the steel industry, recent results may not be indicative of future performance, and historical results may not be comparable to future results. Investors should not rely on the results of a single period, particularly a period of peak prices, as an indication of Ternium’s annual results or future performance.

Demand for Ternium’s products could decline as a result of fluctuations in Ternium’s customers’ inventory levels which could, in turn, cause a decline in Ternium’s sales and revenue.

Inventory levels of steel products held by companies that purchase Ternium’s products can vary significantly from period to period. These fluctuations can temporarily affect the demand for Ternium’s products, as customers draw from existing inventory during periods of low investment in construction and the other industry sectors that purchase Ternium’s

 

9


Table of Contents

products and accumulate inventory during periods of high investment and, as a result, these companies may not purchase additional steel products or maintain their current purchasing volume. Accordingly, Ternium may not be able to increase or maintain its current levels of sales volumes or prices.

Price fluctuations or shortages in the supply of raw materials and energy could adversely affect Ternium’s profits.

Like other manufacturers of steel-related products, Ternium’s operations require substantial amounts of raw materials and energy from domestic and foreign suppliers. In particular, the Ternium companies consume large quantities of iron ore, scrap, ferroalloys, electricity, coal, natural gas, oxygen and other gases in operating their blast and electric furnaces. The availability and price of a significant portion of the raw materials and energy Ternium requires are subject to market conditions and government regulation affecting supply and demand. For example, shortages of natural gas in Argentina and the consequent supply restrictions imposed by the government could lead to higher costs of production and eventually to production cutbacks at Ternium’s facilities in Argentina. See “—Risks Relating to the Countries in Which We Operate—Argentina—Restrictions on the supply of energy to Ternium’s operations in Argentina could curtail Ternium’s production and negatively impact Ternium’s results of operations.” In the past, Ternium has been able to procure sufficient supplies of raw materials and energy inputs to meet its production needs; however, it could be unable to procure adequate supplies in the future. Any protracted interruption, discontinuation or other disruption of the supply of principal inputs to the Ternium companies (including as a result of strikes, lockouts or other problems) would result in lost sales and would have a material adverse effect on Ternium’s business. For further information related to raw materials and energy requirements, see Item 4. “Information on the Company—Raw Materials and Energy.”

Furthermore, estimated amounts of reserves of iron ore from Hylsamex’s mines or from those of Ternium’s suppliers may not be recovered, and these suppliers may revise their reserve estimates based on actual production experience. Reserves may not conform to geological, metallurgical or other expectations, and the volume and quality of iron ore recovered may be below the expected levels.

As the steel industry is highly competitive with respect to price, product quality, customer service and technological advances, worldwide competition in the steel industry has frequently limited the ability of steel producers to raise the price of finished products to recover higher raw material and energy costs. Moreover, in some cases, the governments of some countries are reluctant (as is currently the case in Argentina) to accept price increases of products which are used as raw materials for the manufacture of other goods, as such increases could ultimately impact the inflation rate and in the prices paid by “end consumers” of those goods (e.g., tinplate for cans). Accordingly, increased purchase costs of raw materials and energy might not be recoverable through increased product prices, which would reduce Ternium’s gross profit and revenues. Furthermore, limited availability could cause Ternium to curtail production, which could adversely affect Ternium’s sales and profitability. For further information related to raw materials, see Item 4. “Information on the Company—Raw Materials and Energy.”

The Ternium companies depend on a limited number of key suppliers.

The Ternium companies depend on certain key suppliers for their requirements of raw materials and energy. The Ternium companies have entered into long-term contracts for the supply of a substantial portion of their principal inputs, and it is expected that they will maintain and, depending on the circumstances, renew these contracts. However, if any of the key suppliers fails to deliver or there is a failure to renew these contracts, the Ternium companies could face limited access to raw materials and energy, higher costs and delays resulting from the need to obtain their raw material and energy requirements from other suppliers.

For example, expenditures for iron ore constitute one of Sidor’s largest individual raw material costs. Currently, Sidor purchases all of its iron ore from a single producer in Venezuela at agreed-upon formula prices under a long-term supply agreement expiring in 2017. If Sidor is not able to continue this long-term relationship or to continue purchasing iron ore from such supplier at the agreed-upon prices, it could be unable to obtain sufficient quantities of iron ore from alternative suppliers at prices comparable to those offered by its current supplier and, accordingly, its gross profit could decline. In 2005, following a public announcement by the Venezuelan government that sought to pressure Sidor to renegotiate the terms of the agreement for the supply of iron ore, as permitted under the contract’s hardship provision, Sidor and Venezuelan state-owned CVG Ferrominera del Orinoco, C.A. (“FMO”) amended the pricing terms of the contract. The amended formula increased Sidor’s cost of iron ore for 2006 by 63% and for 2007 by 9.5%. Furthermore, under the revised contract, the

 

10


Table of Contents

pricing formula may be adjusted every two years, on the basis of public policy, Sidor’s competitiveness and the evolution of international steel prices. See “—Risks Relating to the Countries in Which We Operate—Venezuela” and Item 4. “Information on the Company—Raw Materials and Energy—Venezuela—Iron Ore,” “—Electricity” and “—Natural gas.”

Intense competition could cause Ternium to lose its share in certain markets and adversely affect its sales and revenues.

Ternium’s subsidiaries have a substantial market share in their countries of operation where they maintain long-term relationships with their clients. Any fall in demand in these markets due to weak economic conditions or other reasons could adversely affect the operations of these subsidiaries and could redirect sales and the focus of Ternium’s business to other markets. Competition in the global and regional markets could also be affected by antidumping and countervailing duties imposed on some producers in major steel markets and by the removal of barriers to imported products in those countries where the Ternium companies direct their sales. For further information please refer to Item 4. “Information on the Company—Regulation—Trade regulations.” Also, Ternium’s foreign competitors would benefit from any fall in the value of their domestic currencies relative to the U.S. dollar, reducing their operating costs and making their products more competitive.

The market for Ternium’s steel products is highly competitive, particularly with respect to price, quality and service. In both the global and regional markets, Ternium competes against other global and local producers of flat and long steel products, which in some cases have greater financial and operating resources. In addition, several competitors are implementing modernization programs and expanding their production capacity for products that could compete with those of Ternium. To the extent that these producers become more efficient, Ternium could confront stronger competition and could fail to preserve its current shares of the relevant geographic or product markets. See Item 4. “Information on the Company—Competition.” Moreover, competition from alternative materials (including plastic, aluminum, ceramics, glass, wood and concrete) could adversely affect the demand for, and consequently the market prices of, certain steel products and, accordingly, could affect the sales volume and revenue of Ternium and its subsidiaries.

In addition, there has been a trend in recent years toward steel industry consolidation among Ternium’s competitors, and smaller competitors in the steel market today could become larger competitors in the future. For example, Aceralia, Arbed and Usinor merged in February 2002 to create Arcelor, and LNM Holdings and Ispat International merged in October 2004 to create Mittal Steel, which subsequently acquired International Steel Group. Furthermore, in June 2006, Mittal Steel and Arcelor merged to create the world’s largest steel company, Arcelor Mittal. In April 2007, Tata Steel completed the acquisition of Corus. Competition from global steel manufacturers with expanded production capacity such as Arcelor Mittal and new market entrants, especially from China, could result in significant price competition, declining margins and reductions in revenue. Ternium’s larger competitors could use their resources against Ternium in a variety of ways, including by making additional acquisitions, investing more aggressively in product development and capacity and displacing demand for Ternium’s products in certain markets. As a result of such increased competition, Ternium may also lose market share and its sales and revenues could decline.

The steel industry is capital intensive and if Ternium is not able to obtain the capital resources required to continue to modernize and upgrade its facilities, Ternium’s results of operations and growth prospects may be adversely affected.

The production of steel is capital intensive and some of Ternium’s competitors have announced plans to make substantial investments in new equipment and to upgrade existing production facilities. In order to maintain its competitive strengths, Ternium would typically be expected to continue to modernize its production processes, plant and equipment, which would require on-going capital investments. Moreover, as a result of its acquisitions and internal growth, Ternium’s business may require capital expenditures in the future. Ternium may not have adequate sources of funds for any future capital expenditures, and additional financing, if needed, may not be available to Ternium or, if available, may not be obtained on terms acceptable to Ternium and within the limitations contained in Ternium’s existing debt instruments or any future financings. Failure to obtain the required funds could delay or prevent the completion of some of Ternium’s capital projects, which could result in decreased sales.

 

11


Table of Contents

Risks Relating to our Business

If Ternium does not successfully implement its business strategy, its opportunities for growth and its competitive position could be adversely affected.

Ternium plans to continue implementing its business strategy of further integrating the operating and marketing activities of the Ternium companies, developing value-added products, providing services to a wider range of clients in the local and export markets and continuing to pursue strategic acquisition opportunities. Any of these components or Ternium’s overall business strategy could be delayed or abandoned or could cost more than anticipated, any of which could impact its competitive position and reduce its revenue and profitability. For example, Ternium could fail to develop its commercial network and lose market share in its export markets. Even if Ternium successfully implements its business strategy, it may not yield the desired goals.

Recent and future acquisitions, significant investments and strategic alliances could disrupt Ternium’s operations and adversely affect its profits. Ternium may not realize the benefits it expects from these business decisions.

A key element of Ternium’s business strategy is to identify and pursue growth-enhancing strategic opportunities. As part of this growth strategy, Ternium has acquired interests in various companies and engaged in strategic alliances, such as the acquisition of a 49.8% participation in Matesi, Materiales Siderúrgicos S.A. (“Matesi”), an iron ore briquette producer that supplies Sidor with part of its raw material requirements; the acquisition of Hylsamex, one of the main steel producers in Mexico, the acquisition of the assets and facilities of Acindar Industria Argentina de Aceros S.A. (“Acindar”), related to the production of welded steel pipes in the province of Santa Fe in Argentina; the acquisition of 100% of the issued and outstanding shares of Impeco S.A. (“Impeco”), which in turn owned a plant located in the province of San Luis in Argentina, and the acquisition of the 50% interest not previously owned by Hylsamex in Acerex S.A. de C.V. (“Acerex”), a service center in Mexico that processes steel to produce short length and thin steel sheets in various widths.

On April 29, 2007, we entered into a definitive agreement, pursuant to which Ternium, or any of its subsidiaries, is expected to obtain control over Grupo Imsa S.A.B. de C.V., or Grupo IMSA (“Grupo Imsa”), a steel manufacturer with operations in Mexico, United States and Guatemala. The transaction is subject to Mexican and U.S. antitrust clearances and other customary conditions, and is expected to close in the third quarter of 2007. For more information, see Item 5. “Operating and Financial Review and Prospects—G. Recent Developments—(a) Agreement to obtain control over Grupo Imsa”.

We will continue actively to consider other strategic acquisitions and partnerships from time to time. We must necessarily base any assessment of potential acquisitions and alliances on assumptions with respect to operations, profitability and other matters that may subsequently prove to be incorrect. Our Grupo Imsa acquisition, if and when consummated, and other future acquisitions, significant investments and alliances may not perform in accordance with our expectations and could adversely affect our operations and profitability. Furthermore, we may fail to find suitable acquisition targets or fail to consummate our acquisitions under favorable conditions, or could be unable to successfully integrate any acquired businesses into our operations.

These risks, and the fact that integration of any acquired businesses will require a significant amount of the time and resources of Ternium’s management and employees, could disrupt Ternium’s ongoing business and could have a material adverse effect on its business, financial condition and results of operations.

Ternium may be required to record a significant charge to earnings if it must reassess its goodwill or other amortizable intangible assets.

In accordance with IFRS, management must test all of Ternium’s assets, including goodwill and other intangibles, annually for impairment, or more frequently if there are indicators of impairment, and recognize a non-cash charge in an amount equal to the impairment. In connection with the acquisition of Hylsamex completed on August 22, 2005, Ternium recorded USD397.9 million in goodwill as of December 31, 2006. If Ternium’s management were to determine in the future that the goodwill from its acquisition of Hylsamex was impaired, Ternium would be required to recognize a non-cash charge

 

12


Table of Contents

to write down the value of this goodwill, which would adversely affect Ternium’s financial condition and results of operations. If we complete the acquisition of Grupo Imsa referred to elsewhere in this annual report, we are likely to record additional goodwill or other intangibles, which would be subject to the same accounting treatment and potencial consequences.

Ternium’s related party transactions with companies controlled by San Faustin may not always be on terms as favorable as those that could be obtained from unaffiliated third parties.

Some of Ternium’s sales and purchases are made to and from other controlled by San Faustin. These sales and purchases are primarily made in the ordinary course of business, and Ternium believes that they are made on terms no less favorable than those it could obtain from unaffiliated third parties. Ternium will continue to engage in related party transactions in the future, and these transactions may not be on terms as favorable as those that could be obtained from unaffiliated third parties. For information concerning the principal transactions between Ternium and related parties, see Item 7. “Major Shareholders and Related Party Transactions—B. Related Party Transactions.”

Ternium’s transactions with certain business partners and shareholders may not always be on terms as favorable as those that could be obtained from unaffiliated third parties.

Some of Ternium’s sales and purchases are made to and from certain partners and shareholders of its subsidiaries. For example, Sidor has a variety of trade and services-related contractual relationships with entities owned by its minority shareholder, the government of Venezuela, including the purchase of iron ore from, and the sale of pellets to, the state-owned steel company Corporación Venezolana de Guayana (“CVG”). Although we believe that each of its business relationships with business partners and shareholders is on an arm’s length basis, any of these arrangements may not provide terms to Ternium that are substantially similar to, or as favorable as, those that might have been obtained from unaffiliated third parties.

Labor disputes at Ternium’s operating subsidiaries could result in work stoppages and disruptions to Ternium’s operations.

A substantial majority of Ternium’s employees at its manufacturing subsidiaries are represented by labor unions and are covered by collective bargaining or similar agreements, which are subject to periodic renegotiation. Strikes or work stoppages could occur prior to or during the negotiations leading to new collective bargaining agreements, during wage and benefits negotiations or, occasionally, during other periods for other reasons.

The various measures that Ternium’s subsidiaries Siderar and Hylsamex have taken in order to become more competitive have not resulted in significant labor unrest. However, its subsidiary Sidor has from time to time suffered labor disruptions, including the plant stoppages in 2003, 2004 and the strikes and work slowdowns in 2006. Ternium could suffer additional plant stoppages or strikes as a result of future workforce reductions in connection with its productivity improvement and cost reduction plans. Ternium may not be able to maintain a satisfactory relationship with its employees, and any future stoppage, strike, disruption of operations or new collective bargaining agreements could result in lost sales and could increase Ternium’s costs. For more information on labor relations, see Item 6. “Directors, Senior Management and Employees—D. Employees.”

The Ternium companies’ ability to hedge risks could be limited by contractual and regulatory restrictions.

The international operations of the Ternium companies expose them to a variety of financial risks, including the effects of changes in foreign currency, exchange rates and interest rates. A portion of Ternium’s business is carried out in currencies other than the U.S. dollar. As a result of this foreign currency exposure, exchange rate fluctuations impact the Ternium companies’ results as reported in their income statements in the form of both translation risk and transaction risk. In addition, interest rate movements create a degree of risk by affecting the amount of the Ternium companies’ interest payments. Other than those imposed by legal or monetary control entities (like the Argentine Central Bank or the exchange and transfer control entity CADIVI in Venezuela), Ternium’s subsidiaries (other than Sidor) have no restrictions on the use of derivative agreements for hedging purposes. Sidor, however, is limited by both contractual and regulatory restrictions for these types of derivatives contracts. These restrictions and regulations could cause the Ternium companies to be more vulnerable to market fluctuations than they would be if their hedging activities were unlimited. In the ordinary course of business, the Ternium

 

13


Table of Contents

companies (other than Sidor) from time to time enter into exchange rate and interest rate derivatives agreements to manage their exposure to exchange rate and interest rate changes. Future regulatory or financial restrictions in the countries where Ternium operates may affect its ability to mitigate its exposure to financial risks, and thus cause an adverse impact on Ternium’s results of operations and financial condition.

Ternium’s results of operations and financial condition could be adversely affected by movements in exchange rates.

The revenues of the Ternium companies are primarily U.S. dollar-denominated (other than revenues from domestic sales in Mexico), while a significant portion of their costs are denominated in local currency in the markets where they operate. As a result, movements in the exchange rate of the U.S. dollar against these local currencies can have a significant impact on Ternium’s revenue, results and financial condition. A rise in the value of the local currencies relative to the U.S. dollar will increase Ternium’s relative production costs, thereby creating a competitive disadvantage for Ternium relative to some of its competitors. Conversely, a decrease in the value of the local currencies relative to the U.S. dollar will decrease their relative production costs.

Volatility in the exchange rates between the U.S. dollar and the Argentine peso and between the U.S. dollar and the Mexican peso as well as changes to the exchange rate between the U.S. dollar and the Venezuelan bolívar are likely to continue in the future. Such fluctuations will affect Ternium’s production costs, revenues and financial results

A significant rise in interest rates could adversely affect Ternium’s business and results.

Changes in interest rates affect the amount of Ternium’s interest payments as well as the value of its fixed rate debt. Most of Ternium’s long-term borrowings are at variable rates, and accordingly, Ternium is exposed to the risk of increased interest expense in the event of a significant rise in interest rates. Moreover, a substantial rise in interest rates in developed economies such as the United States of America could adversely affect the economies in the countries where Ternium conducts its operations and markets its products and would increase Ternium’s debt service requirements for its floating rate debt.

Risks Relating to the Structure of the Company

As a holding company, our ability to pay dividends and obtain financing depends on the results of operations and financial condition of our subsidiaries and could be restricted by legal, contractual or other limitations.

We conduct all of our operations through our subsidiaries. Dividends or other intercompany transfers of funds from our subsidiaries are expected to be our primary source of funds to pay our expenses, debt service and dividends. We will not be conducting operations at the holding company level.

The ability of our subsidiaries to pay dividends and make other payments to us will depend on their results of operations and financial conditions and could be, including in the circumstances described below, restricted by, among other things, applicable corporate and other laws and regulations, including those imposing foreign exchange controls, and agreements and commitments of such subsidiaries. In addition, our ability to pay dividends is subject to legal and other requirements and restrictions at the holding company level. For example, we may only make distributions out of net profits, retained earnings and available reserves and premiums, each as defined under Luxembourg regulations.

The Company’s controlling shareholder may be able to take actions that do not reflect the will or best interests of other shareholders.

As of March 30, 2007, San Faustín beneficially owned 59.06% of our outstanding voting stock. San Faustín is controlled by Rocca & Partners. As a result, Rocca & Partners is indirectly able to elect a substantial majority of the members of our board of directors and has the power to determine the outcome of most actions requiring shareholder approval, including, subject to the requirements of Luxembourg law, the payment of dividends by us. The decisions of the controlling shareholder, may not reflect the will or best interests of other shareholders. For example, our articles of

 

14


Table of Contents

association permit our board of directors to waive, limit or suppress preemptive rights in certain cases. Accordingly, our controlling shareholder may cause our board of directors to approve an issuance of shares for consideration without preemptive rights, thereby diluting the minority interest in the Company. See “—Risk Factors—Risks Relating to our ADSs—Holders of our shares and ADSs in the United States may not be able to exercise preemptive rights in certain cases.”

Remaining minority interests in the Company’s subsidiaries could delay or impede our ability to complete our strategy.

We do not own one hundred percent of the interests in our subsidiaries. As of May 31, 2007, approximately 32.6% of Siderar was publicly held and approximately 6.5% was held by certain Siderar employees. As of the same date, approximately 20.4% of Sidor was held by the Venezuelan government and Banco de Desarrollo Económico y Social de Venezuela, or BANDES (a bank owned by the Venezuelan government), and approximately 19.9% was held by certain Sidor employees. To the extent that other interests in Siderar, Sidor and Hylsamex remain outstanding, those remaining minority shareholders could prevent Ternium from taking actions that, while beneficial to us at the holding company level, might not be beneficial at the level of any of our individual subsidiaries. As a result, we could be delayed or impeded in the full implementation of our strategy or the maximization of Ternium’s competitive strengths.

We will be subject to a capital duty on any capital increase in connection with our corporate reorganization if the relief obtained from the Luxembourg tax authorities is successfully challenged.

Under Luxembourg law, any increase in the capital of a Luxembourg company is subject to a 1% capital duty. Capital contributions to a Luxembourg company involving all of the assets and liabilities of a company organized in a European Union, or EU, member country are exempt from such capital duty. Our corporate reorganizations in late 2005 and early 2006, consisting of a series of such contributions of assets and liabilities by EU companies, including ISL (which is organized in Gibraltar), to the Company had qualified for such exemption and we obtained confirmation from the Luxembourg tax authorities on the availability of the exemption with respect to each such contribution. However, if the relief granted is successfully challenged, we will be subject to a 1% capital duty on the amount of the corresponding capital increase, plus any applicable penalties.

Our tax-exempt status will terminate on December 31, 2010. If we are unable to mitigate the consequences of the termination of our preferential tax regime, we or our shareholders may be subject to a higher tax burden in the future.

We were established as a société anonyme holding under Luxembourg’s 1929 holding company regime and the “billionaire” provisions relating thereto. 1929 holding companies are exempt from certain business taxes on earnings and on payments. Following a decision by the European Commission, the Grand-Duchy of Luxembourg has terminated its 1929 holding company regime, effective January 1, 2007. However, under the implementing legislation, pre-existing publicly-listed companies -including us- are entitled to continue benefiting from their current tax regime until December 31, 2010. If we are unable to mitigate the consequences of the termination of our preferential tax regime by that year, we or our shareholders may be subject to a higher tax burden in the future.

Risks Relating to the Countries in Which We Operate

Negative economic, political and regulatory developments in certain markets where Ternium has a significant portion of its operations and assets could hurt Ternium’s financial condition, revenues and sales volume and disrupt its manufacturing operations, thereby adversely affecting its results of operations and financial condition.

The results of Ternium’s operations are subject to the risks of doing business in emerging markets, including Argentina, Mexico and Venezuela, and have been, and could in the future be, affected from time to time to varying degrees by political developments, events, laws and regulations, such as forced divestiture of assets; restrictions on production, imports and exports; interruptions to essential energy inputs; exchange and/or transfer restrictions; inflation; devaluation; war or other international conflicts; civil unrest and local security concerns that threaten the safe operation of company facilities; direct and indirect price controls; tax increases; changes in interpretation or application of tax laws and other retroactive tax claims or challenges; expropriation of property; changes in laws, or regulations; cancellation of contract rights; delays or denial of government approvals; and environmental regulations. Both the likelihood of such occurrences and their overall effect upon Ternium vary greatly from country to country and are not predictable. Realization of these risks could have an adverse impact on the results of operations and financial condition of Ternium’s subsidiaries located in the affected country.

 

15


Table of Contents

Argentina

Ternium has significant manufacturing operations and assets located in Argentina and a significant portion of its sales are made in Argentina. Ternium’s main revenues from its Argentine operations, therefore, are indirectly related to market conditions in Argentina and to changes in Argentina’s gross domestic product, or GDP, and per capita disposable income. Accordingly, Ternium’s business could be materially and adversely affected by economic, political, fiscal and regulatory developments in Argentina.

Economic and political instability resulted in a severe recession in 2002, which has had a lasting effect on Argentina’s economy.

In 2001, a sustained period of economic contraction culminated in severe social, monetary and financial turmoil and the resignation of President Fernando de la Rúa. An interim administration adopted a series of emergency measures affecting Argentina’s monetary and fiscal policies, as a result of which the Argentine peso experienced significant devaluation in 2002.

President Kirchner, who was elected in 2003, and enjoys high levels of popular support and the economy, has recovered to levels last attained in 1998, with growth of the country’s gross domestic product, or GDP, averaging 9% per annum since 2003. During 2005, the Argentine government restructured most of the country’s defaulted debt, and unemployment rates have dropped to 8.7% in 2006 from a peak of 24.1% in 2002. Furthermore, the Argentine economy continues to benefit strongly from high international commodity prices, low international interest rates and high levels of global liquidity.

Siderar’s business and results of operations has closely followed macroeconomic conditions in Argentina. Siderar’s sales in the domestic market were severely affected by Argentina’s recession during 2001 and 2002. Domestic sales as a percentage of total sales decreased to 47% in 2001 and 35% in 2002. The domestic economic recovery over the 2003 – 2006 period, with sustained growth in industrial activity, agriculture, construction and a significant improvement in the automobile industry, increased Siderar’s domestic sales as a percentage of total sales to 55% in 2003, 72% in 2004, 71% in 2005 and 85% in 2006.

Despite the progress to date, several significant issues remain to be addressed by the government. Inflation increased significantly during 2005 to 12%, and the economy has been affected by supply constraints as capacity idled during the economic crisis has been utilized. In 2006 the rate of inflation decreased to 9.8%, in part due to several actions implemented by the Argentine government to control inflation and monitor prices for most relevant goods and services, which included price support arrangements agreed to by the Argentine government and private sector companies in several industries and markets. Uncertainty surrounding future inflation and the status of the price support agreements implemented in 2006 could slow the rebound in the economy.

In addition, capital investment in general has lagged due to political uncertainties and government’s actions, including price controls and other measures limiting the private conduct of business. Decline capital investment may affect growth and, accordingly, cause the demand for Siderar’s products in the domestic market to drop.

Economic conditions in Argentina have deteriorated rapidly in the past and may deteriorate rapidly in the future. Should the current favorable conditions reverse, inflation becomes a problem or supply constraints hinder future growth, the Argentine economy may not continue to grow at current rates. Our business and operations in Argentina could be adversely affected by rapidly changing economic conditions in Argentina or by the Argentine government’s policy response to such conditions.

 

16


Table of Contents

The Argentine Central Bank has imposed restrictions on the transfer of funds outside of Argentina and other exchange controls in the past and may do so in the future, which could prevent Ternium from paying dividends or other amounts from cash generated by its Argentine operations.

In 2001 and 2002 and until February 7, 2003, the Argentine Central Bank restricted Argentine individuals and corporations from transferring U.S. dollars abroad without its prior approval. In 2003 and 2004, the government reduced some of these restrictions, including those requiring the Argentine Central Bank’s prior authorization for the transfer of funds abroad in order to pay principal and interest on debt obligations. Nevertheless, significant government controls and restrictions remain in place, and the Argentine government may impose new restrictions on foreign exchange in the future. On June 10, 2005, the Argentine government issued Decree No. 616/2005 establishing certain restrictions on capital inflows into Argentina. The existing controls and restrictions, and any additional restrictions of this kind that may be imposed in the future, could impair Ternium’s ability to transfer funds generated by Ternium’s Argentine operations in U.S. dollars outside Argentina to fund the payment of dividends or other amounts and to undertake investments and other activities that require payments in U.S. dollars. Furthermore, these restrictions could affect Ternium’s ability to finance its investments and operations in Argentina. For additional information on current Argentine exchange controls and restrictions, see Item 10. “Additional Information—D. Exchange Controls”.

In addition, Ternium is currently required to repatriate U.S. dollars collected in connection with exports from Argentina (including U.S. dollars obtained through advance payment and pre-financing facilities) into Argentina and convert them into Argentine pesos at the market-based floating exchange rate applicable on the conversion date. This requirement and any similar requirement that may be imposed in the future, subjects Ternium to the risk of losses arising from an abrupt devaluation of the Argentine peso.

The Argentine government has increased taxes on Ternium’s operations in Argentina and could further increase the fiscal burden on its operations in Argentina in the future.

Since 1992, the Argentine government has not permitted the application of an inflation adjustment on the value of fixed assets for tax purposes. Since the substantial devaluation of the Argentine peso in 2002, the amounts that the Argentine tax authorities permit Ternium to deduct as depreciation for its past investments in plant, property and equipment have been substantially reduced, resulting in a higher effective income tax charge. In addition, in 2002, the Argentine government imposed a 5% tax on the export of manufactured products. If the Argentine government continues to increase the tax burden on Ternium’s operations in Argentina, Ternium’s results of operation and financial condition could be adversely affected.

Restrictions on the supply of energy to Ternium’s operations in Argentina could curtail Ternium’s production and negatively impact Ternium’s results of operations.

As a result of several years of recession, the forced conversion into Argentine pesos at the one-to-one exchange rate and the subsequent freeze of gas and electricity tariffs, there has been a lack of investment in gas and electricity supply and transport capacity in Argentina in recent years. Over the course of the last several years, demand for natural gas has increased substantially, driven by a recovery in economic conditions and low prices in comparison with alternative fuel sources.

Although the Argentine government is taking a number of measures to alleviate the short-term impact of supply restrictions on residential and industrial users (including measures to limit the growth of residential consumption, to increase the price of compressed natural gas and to import natural gas from Bolivia, electricity from Brazil and Uruguay and fuel oil from Venezuela) and has announced several measures intended to address the situation in the medium- and long-term (including creating a new state-owned energy company to fund, or otherwise promote, investments in expanding existing pipeline transportation capacity and building new pipelines and additional power generation capacity and entering into negotiations with electricity and gas producers) supply restrictions and shortages are likely to continue. Two new power plants are currently under construction, which are expected to increase the system capacity by 8%, if and when they become operative in 2009. If the measures that the Argentine government is taking to alleviate the short-term impact of the crisis prove to be insufficient, or if the investment that is required to increase natural gas generation, energy production and transportation capacity and power generation capacity over the medium- and long-term fails to materialize on a timely basis, Ternium’s production in Argentina (or that of its main suppliers), could be curtailed, and Ternium’s sales and revenues could

 

17


Table of Contents

decline. Although Ternium is taking measures, like the purchase of alternative fuels such as fuel oil, to limit the effect of supply restrictions on its operations in Argentina, such efforts may not be sufficient to avoid any impact on Ternium’s production in Argentina (or that of its main suppliers) and Ternium may not be able to similarly limit the effect of future supply restrictions. See “—Risks Relating to the Steel Industry—Price fluctuations or shortages in the supply of raw materials and energy could adversely affect Ternium’s profits” above.

Venezuela

Ternium has manufacturing operations and assets located in Venezuela and a significant portion of its sales are made in Venezuela. Ternium’s revenues derived from its Venezuelan operations, therefore, are indirectly related to market conditions in Venezuela and to changes in its GDP and per capita disposable income. Ternium’s business could be materially and adversely affected by economic, political and regulatory developments in Venezuela.

In prior years, events in Venezuela produced significant social and political tensions, which could worsen and have an adverse effect on us.

Between 2002 and 2004, Venezuela experienced intense political and social turmoil involving groups that opposed and those that supported the administration of President Hugo Chávez. Although the political scene remains divided, President Chávez won the December 2006 presidential elections with 63% of the popular vote and controls all the seats in the National Assembly (formerly the Venezuelan Congress), as well as most state governments, and enjoys broad support. There can be no assurance that the significant domestic instability evident during 2002 though 2004 will not reemerge. Such instability could have a material adverse effect on Venezuela’s economic growth and as a result on Sidor (and consequently Ternium’s) financial condition and results of operations.

The Venezuelan government could take measures related to the Venezuelan steel industry in general, or Sidor in particular, that could affect Ternium’s operations in Venezuela.

The Venezuelan government traditionally has exercised, and continues to exercise, significant influence over many other aspects of the Venezuelan economy. Venezuelan governmental actions (including those related to taxes, price and exchange controls and transfer restrictions) have had in the past, and could have in the future, significant effects on the financial condition and results of operations of Venezuelan companies, including Sidor.

On January 31, 2007, the Venezuelan National Assembly passed an enabling law, or the Enabling Law, granting President Chávez the power to govern by decree with the force of law in various matters, including the industrial and energy sectors, for 18 months.

Following the December 2006 elections and the enactment of the Enabling Law, the Venezuelan government threatened expropriations and took a number of significant measures, including the cancellation of mining concessions, the re-nationalization of public utilities, such as CANTV and Electricidad de Caracas, and forced renegotiation of contracts with oil and gas companies. In this context, officials in the Venezuelan administration have made statements about the possibility of Sidor’s re-nationalization, without adopting, as of the date of this annual report, a definitive resolution on this matter. If political or economic measures such as expropriation, nationalization, price controls or renegotiation or nullification of contracts (like those for the supply of raw materials or energy) were implemented on or in connection with Sidor, its operations and revenues, and consequently Ternium’s financial results, could be adversely affected.

In addition, the Venezuelan government owns a minority stake in Sidor, and, as a minority shareholder, could be able to intervene in Sidor’s business. For example, the approval of the Venezuelan government is required for (i) investments worth USD85 million or more, (ii) dispositions of material assets, (iii) guarantees in an amount of USD15 million or more, (iv) related-party transactions other than on an arm’s length basis, (v) certain material amendments of Sidor’s articles of association. In exercising any such rights, the Venezuelan government could delay the implementation of Ternium’s business strategies in Venezuela or otherwise affect Sidor’s operations.

Other actions by the Venezuelan government may have an impact on Sidor. For example, the Venezuelan government has announced its decision to finance and form state-controlled industrial companies that could have direct or indirect effect on Sidor, including a plant dedicated to concentration or iron ore mined by the state-owned company Ferrominera del

 

18


Table of Contents

Orinoco or FMO, a seamless pipe production facility, an integrated steel production facility and a scrap distribution company. If any of these governmental projects were to be implemented, Sidor’s revenues, and consequently Ternium’s results, could be affected.

Furthermore, Sidor’s operations rely on a number of trade- and services-related contractual relationships with entities owned by the Venezuelan government, including the purchase of iron ore from FMO, the purchase of electricity from Electrificadora del Caroní, C.A. (“EDELCA”) and the purchase of natural gas from PDVSA Gas, S.A. (“PDVSA Gas”). Accordingly, Sidor could suffer from any potential increase in the prices of other raw materials or supplies. In 2005, following a public announcement by the Venezuelan government that sought to pressure Sidor to renegotiate the terms of the agreement for the supply of iron ore, as permitted under the contract’s hardship provision, on November 11, 2005, Sidor and FMO amended the pricing terms of the contract, increasing its prices payable by Sidor by approximately 9.5%. Any subsequent price increases could affect Sidor’s costs and, consequently, Ternium’s results of operations. See “—Risks relating to the steel industry—The Ternium companies depend on a limited number of key suppliers.” and Item 4. “Information on the Company—Raw Materials and Energy—Venezuela”.

While Sidor and the Venezuelan government have engaged in conversations regarding the price and other conditions at which Sidor will suplly its domestic market, it is not possible to predict the outcome of such conversations or to determine what effect existing or future government decisions could have on Sidor’s current ownership or its business.

Several measures imposed by the Venezuelan government, such as exchange controls and transfer restrictions, have affected and may further affect the operations of Ternium’s subsidiaries in Venezuela and could prevent Ternium from paying dividends or other amounts from cash generated by its Venezuelan operations.

In February 2003, after a significant devaluation in 2002 and a sharp decline in economic activity, the Venezuelan government and the Central Bank of Venezuela suspended the trading of foreign currencies and adopted a series of exchange regulations that established a new exchange control regime. A new commission, referred to as the Comisión de Administración de Divisas, or CADIVI, was created for establishment and administration of the new exchange control regime. Under the new regime, the Ministry of Finance, together with the Central Bank of Venezuela, sets the exchange rate with respect to the U.S. dollar and other currencies and has discretion to modify, at any time, the existing exchange control regime or the free float of the bolívar. The new regime centralizes the purchase and sale of foreign currencies, by permitting such sales to be made only through the Central Bank.

Under current regulations, entities that incur or maintain indebtedness denominated in foreign currencies and wish to obtain U.S. dollars from the Central Bank of Venezuela to pay principal, interest and other amounts in respect of such indebtedness must obtain approval from, and have the indebtedness registered with, CADIVI. In accordance with these regulations, Sidor has registered its external indebtedness and trade account payables. Any modification to the registered use of proceeds at CADIVI will require additional approval. If Sidor fails to obtain any required approvals or to register any debt under these regulations, CADIVI could impose penalties which could negatively affect its business.

In addition to the foregoing approval, Sidor must obtain from CADIVI a separate approval for the purchase from the Central Bank of foreign currency necessary to make payments under their registered indebtedness. These approvals may only be obtained at or around the time each payment becomes due under such indebtedness. Pursuant to the current regulations, CADIVI’s approval for the purchase or sale of foreign currency from the Central Bank is subject to the availability of such foreign currency at the time of such request, and any foreign currency obtained may only be utilized for the purposes previously approved by CADIVI. If CADIVI fails to issue such approvals with respect to amounts due under the indebtedness or if Sidor fails to obtain such approval prior to the dates on which such amounts are due and payable, it may not be able to pay its debt under the agreed conditions. Moreover, if timely payments in respect of the indebtedness cannot be made due to delays in obtaining the CADIVI approvals, certain of Sidor’s creditors will have the right to accelerate its indebtedness. A delay in payments made to suppliers could also result in requests for additional payment guarantees from Sidor or other assurances of payment, or could otherwise adversely affect Sidor’s commercial relationship with suppliers and affect its business opportunities.

Mexico

 

19


Table of Contents

Ternium has significant manufacturing operations and assets located in Mexico and a significant portion of its sales are made in Mexico. Ternium’s main revenues derived from its Mexican operations, therefore, are indirectly related to market conditions in Mexico and to changes in its GDP and per capita disposable income. Ternium’s business could be materially and adversely affected by economic, political and regulatory developments in Mexico.

Economic conditions and government policies in Mexico could negatively impact Ternium’s business and results of operation.

In the past, Mexico has experienced several periods of slow or negative economic growth, high inflation, high interest rates, currency devaluation and other economic problems. Furthermore, the Mexican national economy tends to reflect changes in the economic environment in the United States. If problems such as deterioration in Mexico’s economic conditions, social instability, political unrest, reduction in government spending or other adverse social developments reemerge in the future, they could lead to increased volatility in the foreign exchange and financial markets, and, depending on their severity and duration, could adversely affect the business, results of operations, financial condition, liquidity or prospects of Ternium. For example, adverse economic conditions in Mexico could result in higher interest rates accompanied by reduced opportunities for refunding or refinancing, foreign exchange losses associated with dollar-denominated debt, increased raw materials and operating costs, reduced domestic consumption of Ternium’s products, decreased operating results and delays in capital expenditures dependent on U.S. dollar purchases of equipment. Severe devaluation of the Mexican peso may also result in disruption of the international foreign exchange markets, hindering Ternium’s ability to convert Mexican pesos into U.S. dollars and other currencies for the purpose of making purchases of raw materials or equipment.

Mexican government policies will likely significantly affect the economy and as a result, Ternium’s Mexican operations.

Future actions of the Mexican government or the effect in Mexico of international events could adversely affect Ternium’s results and financial condition. The Mexican government has exercised, and continues to exercise, significant influence over the Mexican economy. Mexican government actions concerning the economy could have adverse effects on private sector entities in general and on Ternium in particular. Economic plans of the Mexican government in the past have not always fully achieved their objectives. Beginning in 1994, and continuing through 1995, Mexico experienced an economic crisis characterized by exchange rate instability, a devaluation of the Mexican peso, high inflation, high domestic interest rates, economic contraction, a reduction of international capital flows, reduced consumer purchasing power and high unemployment. In response to the economic crisis, the Mexican government implemented broad economic reform programs, which improved economic conditions until growth declined again in 2001, accompanied by increased inflation rates in 2000, 2001 and 2002. It is not possible to determine what effect existing or future government economic plans or their implementation could have on the Mexican economy or on Ternium’s financial condition or results of operations.

Certain Regulatory Risks and Litigation Risks

International trade actions or regulations and trade-related legal proceedings could adversely affect Ternium’s sales, revenues and overall business.

International trade-related legal actions and restrictions pose a constant risk for Ternium’s international operations and sales throughout the world. Additionally, increased global trade liberalization, with many countries forming free trade blocs or otherwise reducing restrictions on imported goods, including flat steel products, and persistent excess global steel capacity have increased competition in many markets in which Ternium sells flat steel products. Such risks and increased competition are likely to continue into the foreseeable future.

Increased trade liberalization has reduced certain of Ternium’s imported input costs and increased Ternium’s access to many foreign markets. However, greater trade liberalization has also increased competition for Ternium in its domestic markets. Consequently, Ternium’s domestic market share could be eroded in the face of foreign imports if tariffs and other barriers are reduced or eliminated in Ternium’s domestic markets. Ternium’s increased exports to foreign markets where

 

20


Table of Contents

import barriers have been reduced may not completely offset domestic market share losses resulting from increased foreign competition.

Countries can impose restrictive import duties and other restrictions on imports under various national trade laws. The timing and nature of countries’ imposition of trade-related restrictions potentially affecting Ternium’s exports are unpredictable. Ternium’s international operations are vulnerable to such trade actions or restrictions that surface in any country to which Ternium exports or potentially could export. Trade restrictions on Ternium’s exports could adversely affect Ternium’s ability to sell products abroad and, as a result, Ternium’s profit margins, financial condition and overall business could suffer.

One significant source of trade restrictions results from countries’ imposition of so-called “antidumping” and “countervailing” duties, as well as “safeguard measures.” These additional duties can be quite high and, as a result, severely limit or altogether impede an exporter’s ability to export to important markets such as the United States of America and Europe. In several of Ternium’s major export destinations, such as the United States of America or Europe, safeguard duties and other protective measures have been imposed against a broad array of steel imports in certain periods of excess global production capacity. Furthermore, certain domestic producers have filed antidumping and/or countervailing duty actions against particular steel imports. Some of these actions have led to restrictions on Ternium’s exports of certain types of steel products to some steel markets. As domestic producers’ filing of such actions is largely unpredictable, additional antidumping, countervailing duty or other such import restrictions could be imposed in the future, limiting Ternium’s export sales to and potential growth in those markets. See Item 4. “Information on the Company—Regulation—Trade regulations.”

Potential environmental, product liability and other claims could create significant liabilities for Ternium that could adversely affect its business, financial condition, results of operations and prospects.

Some of the activities for which the Ternium companies supply products, such as canning for consumption, construction and the automotive industry are subject to inherent risks that could result in death, personal injury, property damage or environmental pollution. Furthermore, Ternium’s products are also sold to, and used in, certain safety-critical appliances. Correspondingly, defects in Ternium’s products or an inconsistency with the specifications of an order or the requirements of an application, could result in death, personal injury, property damage, environmental pollution, damage to equipment or disruption to a customer’s production lines. Actual or claimed defects in the products of the Ternium companies could give rise to claims against Ternium or its subsidiaries for losses and expose it to claims for damages, including significant consequential damages. In addition, the Ternium companies are subject to a wide range of local, provincial and national laws, regulations, permits and decrees relating to the protection of human health and the environment, and remediation or other environmental claims could be asserted against Ternium. The insurance maintained by Ternium may not be adequate or available to protect it in the event of a claim or its coverage could be canceled or otherwise terminated. A major claim for damages related to products sold could have a material adverse effect on Ternium’s business, financial condition, results of operations or prospects.

Labor regulations in the countries in which Ternium operates could result in higher labor costs and mandatory allowances for employee participation, resulting in lower net income for Ternium.

Certain legal obligations require Ternium’s operating subsidiaries to contribute certain amounts to retirement funds and pension plans and restrict their ability to dismiss employees. The Ternium companies are also subject to other obligations, such as those in Venezuela and Mexico, under which such subsidiaries are required to distribute a percentage of their annual income calculated on a fiscal basis to their employees. In addition, certain Venezuelan courts have recently ruled in favor of an increase in benefits payable to retired employees of other Venezuelan companies. Future regulations or court interpretations established in the countries in which Ternium conducts its operations could increase its costs and reduce net income.

Risks Relating to our ADSs

The market price for our ADSs could be highly volatile.

Volatility in the price of our ADSs may be caused by factors outside of our control and may be unrelated or disproportionate to Ternium’s operating results. In particular, announcements of potentially adverse developments, such as

 

21


Table of Contents

proposed regulatory changes, new government investigations or the commencement or threat of litigation against Ternium, as well as announced changes in Ternium’s business plans or those of its competitors could adversely affect the trading price of our ADSs, regardless of the likely outcome of those developments or proceedings. Broad market and industry factors could adversely affect the market price of our ADSs, regardless of its actual operating performance.

Furthermore, the trading price of our ADSs could suffer as a result of developments in emerging markets. Although the Company is organized as a Luxembourg corporation, all of its assets and operations are located in Latin America. Financial and securities markets for companies with a substantial portion of their assets and operations in Latin America are, to varying degrees, influenced by politic, economic and market conditions in emerging market countries. Although market conditions are different in each country, investor reaction to developments in one country can have significant effects on the securities of issuers with assets or operations in other emerging markets, including Argentina, Venezuela and Mexico. Prices of Latin American securities were adversely affected by, among other things, the economic crises in Russia and in Brazil in the second half of 1998, by the collapse of the exchange rate regime in Turkey in February 2001 and by the Argentine crisis in 2001.

In deciding whether to purchase, hold or sell our ADSs, you may not be able to access as much information about us as you would in the case of a U.S. company.

There may be less publicly available information about us than is regularly published by or about U.S. issuers. Also, Luxembourg regulations governing the securities of Luxembourg companies may not be as extensive as those in effect in the United States, and Luxembourg law and regulations in respect of corporate governance matters might not be as protective of minority shareholders as state corporation laws in the United States. Furthermore, the accounting standards in accordance with which Ternium’s consolidated financial statements, as well as the consolidated financial statements of its operating subsidiaries, are prepared differ in certain material aspects from the accounting standards used in the United States.

Holders of our ADSs may encounter difficulties in the exercise of dividend and voting rights.

You may encounter difficulties in the exercise of some of your rights with respect to shares if you hold ADSs rather than shares. If we make a distribution in the form of securities, the depositary is allowed, in its discretion, to sell on your behalf those securities and instead distribute the net proceeds to you. Also, under some circumstances, such as our failure to provide the depositary with voting materials on a timely basis, you may not be able to vote by giving instructions to the depositary.

Holders of our shares and ADSs in the United States may not be able to exercise preemptive rights in certain cases.

Pursuant to Luxembourg corporate law, existing shareholders of the Company are generally entitled to preemptive subscription rights in the event of capital increases and issues of shares against cash contributions. Under the Company’s articles of association, the board of directors has been authorized to waive, limit or suppress such preemptive subscription rights until October 26, 2010. The Company, however, may issue shares without preemptive rights only if the newly-issued shares are issued:

 

   

for, within, in conjunction with or related to, an initial public offering of the shares of the Company on one or more regulated markets (in one or more instances);

 

   

for consideration other than cash;

 

   

upon conversion of convertible bonds or other instruments convertible into shares of the Company; provided, however, that the pre-emptive subscription rights of the then existing shareholders shall apply in connection with any issuance of convertible bonds or other instruments convertible into shares of the Company for cash; and

 

   

subject to a certain maximum percentage, as compensation to directors, officers, agents or employees of the Company, its direct or indirect subsidiaries or its affiliates, including without limitation the direct issuance of shares or the issuance of shares upon exercise of options, rights convertible into shares or similar instruments convertible or exchangeable into shares issued or created to provide compensation or incentives to directors, officers, agents or employees of the Company, its direct or indirect subsidiaries or its affiliates.

 

22


Table of Contents

For further details, see Item 10. “Additional Information—B. Memorandum and Articles of Association.”

Furthermore, holders of our shares and ADSs in the United States may, in any event, not be able to exercise any preemptive rights, if granted, for shares unless those shares are registered under the U.S. Securities Act of 1933, as amended (the “Securities Act”) with respect to those rights or an exemption from registration is available. We intend to evaluate, at the time of any rights offering, the costs and potential liabilities associated with the exercise by holders of shares and ADSs of the preemptive rights for shares, and any other factors we consider appropriate at the time, and then to make a decision as to whether to register additional shares. We may decide not to register any additional share, requiring a sale by the depositary of the holders’ rights and a distribution of the proceeds thereof. Should the depositary not be permitted or otherwise be unable to sell preemptive rights, the rights may be allowed to lapse with no consideration to be received by the holders of the ADSs.

It may be difficult to obtain or enforce judgments against the Company in U.S. courts or courts outside of the United States.

The Company is a corporation organized under the laws of Luxembourg, and most of its assets are located outside of the United States of America. Furthermore, most of the Company’s directors and officers named in this annual report reside outside the United States of America. As a result, investors may not be able to effect service of process within the United States of America upon the Company or its directors or officers or to enforce against the Company or them in U.S. courts judgments predicated upon the civil liability provisions of U.S. federal securities law. There is doubt as to the enforceability in original actions in Luxembourg courts of civil liabilities predicated solely upon U.S. federal securities law, and the enforceability in Luxembourg courts of judgments entered by U.S. courts predicated upon the civil liability provisions of U.S. federal securities law will be subject to compliance with procedural requirements under Luxembourg law, including the condition that the judgment does not violate Luxembourg public policy.

 

Item 4. Information on the Company

Overview

Ternium is one of the leading steel companies in the Americas, with a strategic presence in several major steel markets through a network of distribution, sales and marketing services. We believe Ternium is among the largest producers of crude steel in Latin America, with manufacturing, processing and finishing facilities, which produced nearly ten million tons of crude steel in 2006. The Company believes that it is one of the lowest cost steel producers in the Americas due to its integrated operations, state-of-the-art steel production facilities, access to diversified sources of low-cost raw materials and other production inputs and operating efficiencies.

Ternium produces and distributes a broad range of semi-finished and finished steel products, including value-added steel products such as tinplate, cold rolled coils and sheets, galvanized and electrogalvanized sheets, pre-painted sheets, welded pipes, hot rolled pickled and annealed and tailor-made flat products. Ternium also produces long steel products such as bars and wire rod.

Ternium primarily sells its steel products in the regional markets of North, Central and South America, where its manufacturing facilities are located, allowing it to provide specialized products and delivery services to its clients. We believe that Ternium is the leading supplier of flat steel products in Argentina and of flat and long steel products in Venezuela, a significant competitor in the Mexican market for flat and long steel products, and a competitive player in the international steel market for flat and long steel products. Ternium maintains a strategic presence in other major steel markets, such as Europe and Asia through its network of commercial offices, which allows it to reach clients outside its regional markets and place products in case of slower demand in domestic economies, achieve improved effectiveness in the supply of its products and maintain a fluid commercial relationship with its clients by providing continuous services and assistance.

Approximately 56.4% of Ternium’s sales were made to South and Central America, 42.1% to North America and 1.5% to Europe and other markets.

 

23


Table of Contents

In 2006, Ternium’s net sales were USD6.6 billion, gross profit was USD2,267.6 million, and net income attributable to equity holders was USD795.4 million, which amounts reflect the consolidation of all the subsidiaries for the full fiscal year.

A. History and Corporate Organization

The Company’s legal and commercial name is Ternium S.A. The Company was organized as a joint stock corporation (societé anonyme holding) in the Grand Duchy of Luxembourg on December 22, 2003. Our registered office is located at 46a, Avenue John F. Kennedy – 2nd floor, L-1855 Luxembourg and our telephone number is +352 2668 31 52. Its agent for U.S. federal securities law purposes is Ternium International Corp., located at 2200 West Loop South, 7th floor, Houston, TX 77027.

As a part of a multiple-step corporate reorganization in 2005, San Faustin reorganized its investments in flat and long steel manufacturing, processing and distribution businesses by contributing its controlling interests in Siderar, Sidor (through Amazonia and Ylopa) and Ternium Internacional to the Company.

On August 22, 2005, we acquired, together with Siderar, an indirect 99.3% interest in the Mexican company Hylsamex and its subsidiaries and the equity stakes owned by Hylsamex’s former controlling shareholder, Alfa, S.A. de C.V., or Alfa, in Amazonia and Ylopa. We subsequently purchased additional shares of Hylsamex in the open market, subject to applicable law, thereby increasing our and Siderar’s indirect interest in Hylsamex to 99.8%.

On September 9, 2005, Tenaris exchanged with ISL its 21.2% interest in Amazonia and its 24.4% interest in Ylopa for shares of the Company, and on October 27, 2005, Usiminas Europa A/S, a Danish wholly owned subsidiary of Usiminas, assigned and contributed to the Company all of its assets (then including a 5.3% interest in Siderar, a 16.6% interest in Amazonia and a 19.1% interest in Ylopa) and liabilities in exchange for shares of the Company.

Similarly, on November 17, 2005, Siderúrgica del Turbio S.A. “SIDETUR” (“Sidetur”), a subsidiary of Siderúrgica Venezolana “SIVENSA”, S.A. (“Sivensa”), exchanged with ISL its 3.4% interest in Amazonia for shares of the Company.As a result of the foregoing transactions, as of December 31, 2005, the Company owned a 56.07% interest in Siderar, a 59.73% interest in Sidor (through Amazonia and Ylopa), a 99.8% in Hylsamex and a 100% interest in Ternium International.

On January 11, 2006 the Company launched an initial public offering of 24,844,720 American Depositary Shares, each representing 10 shares of the Company (each an “ADS”), in the United States. In connection with the offering, the Company granted the underwriters of the Company’s initial public offering an option to purchase up to 3,726,708 additional ADSs to cover over-allotments in the sale of the ADSs. The offering was settled on February 6, 2006.

On December 28, 2006, we acquired an additional 4.85% interest in Siderar from CVRD Internacional S.A., a wholly-owned subsidiary of Companhia Vale do Rio Doce (“CVRD”), thereby increasing our ownership in Siderar to 60.93%.

On April 29, 2007, we entered into a definitive agreement pursuant to which, Ternium, or any of its subsidiaries, is expected to obtain control over Grupo Imsa, a steel manufacturer with operations in Mexico, United States and Guatemala. The transaction is subject to Mexican and U.S. antitrust clearances and and other customary conditions, and is expected to close in the third quarter of 2007. For more information, see Item 5. “Operating and Financial Review and Prospects—G. Recent Developments—(a) Agreement to obtain control over Grupo Imsa”.

B. Business Overview

Our Business Strategy

Our main strategic objective is to enhance shareholder value by strengthening Ternium’s position as a low cost producer of steel products in a manner consistent with minority shareholder rights, while further consolidating Ternium’s position as a leading flat and long steel producer in Latin America and a strong competitor in the Americas with strategic presence in several other major steel markets.

The main elements of this strategy are:

 

24


Table of Contents
   

Further integrate Ternium’s operations. We have changed our functional organization from three independent companies to one company organized under business units with specific functional responsibilities, and if we consummate the Grupo Imsa transaction referred to elsewhere in this annual report, we expect to integrate Grupo Imsa into that functional organization. Integrating the operations of our subsidiaries has allowed Ternium to better serve its clients, to increase the diversification of its products, to benefit from enhanced flexibility and operative synergies and to rationalize its cost structure;

 

   

Enhance Ternium’s position as a low cost producer. We believe that further integration of Ternium’s operating facilities should improve utilization levels of its plants, increase efficiency and further reduce production costs from levels that we already consider to be among the most competitive in the steel industry;

 

   

Implementing Ternium’s best practices. We believe that the implementation of Ternium’s commercial and production best practices in acquired new businesses should generate additional benefits and savings. For example, the implementation of Ternium’s cost control procedures and performance analysis in Hylsamex improved control over its production variables and led to higher cost savings;

 

   

Focus on higher margin value-added products. We intend to continue to shift Ternium’s sales mix towards higher margin value-added products, such as cold rolled sheets and coated and tailor-made products, and services, such as just-in-time delivery and inventory management. In this regard, the Hylsamex acquisition in 2005 allowed Ternium to expand its offerings of value-added products, such as galvanized products and panels, and the Grupo Imsa transaction referred to elsewhere in this annual report, if and when consummated, is expected to expand our offerings of flat and value-added products such as galvanized products;

 

   

Maximize the benefits arising from Ternium’s broad distribution network. We intend to maximize the benefits arising from Ternium’s broad network of distribution, sales and marketing services to reach clients in major steel markets with a comprehensive range of value-added products and services and to continue to expand its customer base and improve its product mix. For example, the acquisition of Hylsamex allowed us to increase Ternium’s participation in the North American market; and the Grupo Imsa transaction referred to elsewhere in this annual report, if and when consummated, is expected further to increase that participation; and

 

   

Pursue strategic growth opportunities. San Faustin has a history of strategically growing its businesses through acquisitions. In addition to strongly pursuing organic growth, we intend to identify and pursue growth-enhancing strategic opportunities to consolidate Ternium’s presence in its markets, expand its offerings of value-added products and increase its distribution capabilities. On April 29, 2007, we entered into a definitive agreement with Grupo Imsa, a steel manufacturer with operations in Mexico, United States and Guatemala. Pursuant to this transaction, Ternium, or any of its subsidiaries, is expected to obtain control over Grupo Imsa. The transaction is subject to Mexican and U.S. antitrust clearances and other customary conditions, and is expected to close in the third quarter of 2007. For more information, see Item 5. “Operating and Financial Review and Prospects—G. Recent Developments—(a) Agreement to obtain control over Grupo Imsa”.

Our Competitive Strengths

We believe that the following competitive strengths distinguish Ternium from its competitors and enhance its leading market position:

 

   

State-of-the-art, low cost producer. The combination of a portfolio of state-of-the-art, low cost steel production mills (some of which are located near proprietary iron ore mines), access to diversified sources of low-cost raw materials and cost-competitive energy and labor sources and other production inputs and operating efficiencies makes Ternium a low cost producer of steel and value-added products;

 

   

Strong market position and extensive market reach. Ternium has leading market participation in Argentina and Venezuela and has a strong market position in Mexico. The location of its production facilities gives Ternium favorable access to some of the most important regional markets in the Americas, including the North American

 

25


Table of Contents
 

Free Trade Agreement, or NAFTA, Mercado Común del Sur, or Mercosur, and the Comunidad Andina de Naciones, or Andean Community;

 

   

Experienced and committed management team. Our management team has extensive experience in, and knowledge of, the steel industry, which enhances Ternium’s reputation in the global steel markets. A large percentage of our senior managers have spent their entire careers working within the steel businesses of San Faustin and its affiliates. Our management team has substantial experience in increasing productivity and reducing costs, as well as in identifying, evaluating and pursuing growth opportunities and integrating acquisitions; and

 

   

Strong financial position. We believe that, since the completion of our initial public offering in February 2006, Ternium has maintained a solid financial position. In particular, our relatively low debt to equity capital structure, together with our strong cash flow generation, provides us with the flexibility and resources to enhance existing businesses through investment projects and to make strategic investments and acquisitions.

Our Products

The Ternium companies produce mainly finished and semi-finished flat and long steel products which are sold either directly to steel processors or to end-users, after different value-adding processes. Flat steel products include hot rolled coils and sheets, cold rolled coils and sheets, tin plate, hot dipped galvanized and electrogalvanized sheets and pre-painted sheets. Galvanized and pre-painted sheets can be further processed into a variety of corrugated sheets, trapezoidal sheets, corrugated and galvanized steel guard rails and drains and other tailor-made products to serve its customers’ requirements. Long steel products include billets (steel in its basic, semi-finished state), wire rod and bars.

Flat steel products

Slabs: Slabs are semi-finished steel forms that are used as inputs for the production of flat steel products such as hot rolled coils, cold rolled coils, and the coated and tailor-made products described below. A slab is different from a billet (the semi-finished product used for long steel production) mainly in its dimensions. Both slabs and billets are generally continually casted. The use of slabs is determined by its dimensions and by its chemical and metallurgical characteristics.

Hot rolled products: Hot rolled products are used by a variety of industrial consumers in applications such as the manufacturing of wheels, auto parts, pipes, gas cylinders and containers. They are also directly used for the construction of buildings, bridges and railroad cars, and for the chassis of trucks and automobiles. Hot rolled products can be supplied as coils or as sheets cut to a specific length. These products also serve as inputs for the production of cold rolled products.

Cold rolled products: Cold rolled products are applied mainly to the automotive, home appliance and capital goods industries, as well as to galvanizers, drummers, distributors and service centers. Cold rolled coils are sold as coils or cut into sheets or blanks to meet customers’ needs.

Tin plate and tin free: Given its resistance to corrosion and its mechanical and chemical characteristics, tin plate is mainly sold to the packaging industry for food canning, sprays and paint containers. Tin plate and tin free are produced by coating cold rolled coils with a layer of tin and thin crome, respectively, that is attached by an electroplating continous process.

Hot dipped galvanized and pre-painted sheets: The construction industry is the main market for hot dipped galvanized products. Hot dipped galvanized sheets are produced by adding a layer of zinc to cold rolled coils, which are afterwards cut into sheets. Galvanized sheets can also be pre-painted, resulting in a product that is mainly sold to the construction industry for building coverings, manufacturing of ceiling systems, panels, air conditioning ducts and several other uses. Ternium also offers a distinctive type of galvanized product with the trademark “CINCALUM.” This product is manufactured by adding layers of zinc and aluminum to cold rolled coils that improve product performance for construction industry, including rural, industrial and marine sites.

Electrogalvanized and pre-painted sheets: Electro-galvanized and pre-painted sheets are sold not only to customers in the automotive and home appliance industries, but also to clients working in the construction of road-defenses, sewage systems, bridges and other infrastructure projects. Electro-galvanized and pre-painted sheets are produced from cold rolled coils by adding a layer of zinc that is attached by an electroplating continous process, in one or both sides. The electro-galvanized

 

26


Table of Contents

coils are subsequently cut and sold either as sheets or are further processed with a color coating to produce pre-painted sheets. Electro-galvanization provides products with a longer useful life and more resistance to corrosion.

Long steel products

Steel billets: Billets are semi-finished steel forms that are used as inputs in the production of long steel products such as bars, channels or other structural shapes. A billet is different from a slab mainly in its dimensions. Both billets and slabs are generally cast using the continuous casting method.

Wire rod: Rods are round, thin, semi-finished steel products that are rolled from a billet and coiled for further processing. Rods are commonly drawn into wire products or used to make bolts and nails. Wire rod can be produced in different qualities according to clients’ demands.

Bars: Bars are long steel products that are rolled from billets. Two of the most common types of bars produced are merchant bars and reinforcing bars (rebar). Merchant bars include specific shape features such as rounds, flats, angles, squares and channels that are used by clients to manufacture a wide variety of products such as furniture, stair railings and farm equipment. Rebar is used to strengthen concrete highways, bridges and buildings.

Other products

Steel pipes and tubular products: Welded steel pipe is typically used for the transport of water, air, gas and other liquids. Tubular products include galvanized pipes for liquid conduction, structural and industrial applications and light structural shapes which can be used for a variety of applications, including the transport of other forms of gas and liquids under high pressure, pipe for electrical cable conduits and also for oil and gas applications.

We also produce pig iron and pellets.

Within each of the basic product categories there is a range of different “items” of varying qualities and prices that are produced either to meet the particular requirements of end users or sold as commodity items.

Production Process and Facilities

Ternium operates state-of-the-art steelmaking facilities. We consider Ternium to be among the lowest cost producers in the Americas, as a result of:

 

   

strategically located plants;

 

   

favorable access to raw materials, some purchased under long-term contracts and others available at proprietary mines, and access to cost competitive energy and labor sources;

 

   

operating history of almost 40 years, which translates into solid industrial know-how;

 

   

constant benchmarking and best-practices sharing among the different facilities; and

 

   

intensive use of information technology in its production processes.

Our main steel production facilities are located in Argentina, Venezuela and Mexico. If and when we consummate the Grupo Imsa transaction referred to elsewhere in this annual report, we will add production facilities in Mexico, the United States and Guatemala. The following map shows Ternium’s manufacturing centers and commercial network offices around the world as of the date of this annual report.

 

27


Table of Contents

LOGO

Ternium’s aggregate production capacity of hot rolled steel products for the year ended December 31, 2006 was 8.1 million tons. Ternium’s aggregate production capacity of long steel products (wire rod and rebar) was 2.1 million tons for the same year. In this annual report, annual production capacity is calculated based on standard productivity, estimated product mix allocations and considering the maximum number of possible working shifts and a continued flow of supplies to the production process.

Argentina

Ternium’s subsidiary Siderar is located in Argentina and conducts its operations through production facilities at the five locations described below. Each facility is owned by Siderar and located in the Province of Buenos Aires, Argentina.

The following table presents the annual production capacity of the major operational units of the facilities located in Argentina as of December 31, 2006, the year in which operations started for the relevant units and the year of the last major overhaul:

 

     Capacity    Start year    Year of last
major overhaul
     (Thousand tpy)          

Coke Plants

   1,070    1974    1996

Sinter Plant

   1,430    1972    2006

Blast Furnace No. 1

   1,340    1960    2006

Blast Furnace No. 2

   2,260    1974    1995

Continuous Casting

   2,850    1984    2003

Hot Rolling Mills

   2,750    1962    2006

Cold Rolling Mills

   1,610    1962(1)/1969(2)    1998(1)/1998(2)

Tinning Mills

      160    1966    2003

Galvanizing Mills

      530    1970(3)/1976(4)    1998(3)/2002(4)

Electro-galvanizing Mill

      120    1993    2006

Painting Facilities

        65    1982    2000

 

28


Table of Contents

(1) Ramallo
(2) Ensenada
(3) Haedo
(4) Canning

Ramallo. Our principal manufacturing facility in Argentina is a fully integrated, strategically located plant on the banks of the Paraná River near the town of San Nicolás in the district of Ramallo, which is approximately 280 kilometers north of the city of Buenos Aires. This plant was acquired in the privatization of the state-owned company Somisa in 1992. The Ramallo facility produces all of Siderar’s crude steel and has an effective annual production capacity of 2.8 million tons per year (“tpy”). The Ramallo facility includes:

 

   

two coke oven plants, one composed of two compound coke batteries, with a total of 80 ovens and the other with one battery of 45 ovens. The coke ovens have an aggregate capacity of 1.1 million tpy;

 

   

a continuous feed sinter plant with a total capacity of 1.4 million tpy;

 

   

two blast furnaces: No. 2 with a total capacity of 2.3 million tpy and No. 1 with a capacity of 1.3 million tpy. Blast Furnace No. 1 was fired up in October 2004, after 9 years of inactivity, to cover the production requirements of the steel complex during the relining of Blast Furnace No. 2;

 

   

a steel making plant, with three 200-ton basic oxygen converters, a ladle furnace and one two-strand slab continuous casting machine with a capacity of 2.8 million tpy;

 

   

a hot rolling mill, comprised of an 11-stand continuous wide hot strip roller with a total capacity of 2.75 million tpy;

 

   

a cold rolling mill, with a pickling line, a four-stand tandem cold reduction line with a capacity of 0.6 million tpy, an electrolytic cleaning line, two annealing bays, and two temper/skin pass lines;

 

   

an electrolytic tinning mill with a total capacity of 160 thousand tpy;

 

   

two service centers: one for tin plated products, with a current capacity of 155 thousand tpy and another for hot rolled product with a capacity of 130 thousand tpy;

 

   

a 27 foot deep, two-dock port on the Paraná river used for the reception of raw materials (mainly iron ore and coal) and for the shipment of finished products; and

 

   

auxiliary services such as a thermo-electric plant, an oxygen, nitrogen and argon gas-separation plant, lime kilns, a maintenance shop and computer and training centers.

Ensenada. The Ensenada plant has a capacity of up to 1.0 million tpy of cold rolled uncoated sheets and coils. The hot rolled coils it uses come from the Ramallo facility, located at a distance of 330 kilometers by land and approximately 300 kilometers by river. The plant is located on the bank of the River Plate at Ensenada, approximately 70 kilometers south of Buenos Aires. The facility includes:

 

   

a cold rolling mill with a pickling line, a four-stand tandem cold reduction line, an annealing line, a one-stand temper/skin pass line, one tension flattening line and one inspection line for sheet and coil; and

 

   

a private port with one freight platform of 150 meters capable of unloading vessels of up to 35 thousand tons and other auxiliary installations for maintenance and administrative activities.

 

29


Table of Contents

Florencio Varela. This facility is located in Florencio Varela, 30 kilometers south of Buenos Aires at a distance of 35 kilometers and 295 kilometers from Ensenada and Ramallo, respectively. This plant receives cold rolled coils from Ensenada and Ramallo as raw material for its own processes. The facility in this location includes:

 

   

Sidercolor, which is an electrolytic galvanizing plant with a capacity of 120 thousand tpy of electrogalvanized sheet and includes one soluble anode electrolytic galvanizing line, one cut-to-length line and auxiliary installations.

 

   

two service centers that produce blanks, skelp and sheets, which are customized steel shapes cut from flat steel products for use by customers in the manufacture of finished products. Ternium’s production of customized products enables its customers to shorten their lead time for their own production. The service centers have a production capacity of 290 thousand tpy of blanks and customized products and operate cut-to-length lines, a flattening line, a slitting line and a packaging line for sheet and auxiliary installations comprised of a maintenance shop and an office building.

Haedo. The Haedo plant is located at a distance of 90 kilometers from the Ensenada facility and 270 kilometers from Ramallo. Crude cold rolled sheets used at the plant are received from the Ramallo and Ensenada facilities. The Haedo plant includes a continuous hot dipped galvanizing line with a capacity of 180 thousand tpy of coated sheets. The facility also operates a cut-to-length line, four shapers and five presses. In addition, its auxiliary installations include a maintenance shop, a laboratory and an office building.

Canning (formerly Comesi). This facility is located in Canning, approximately 40 kilometers south of the city of Buenos Aires. This facility includes:

 

   

a galvanizing line with a capacity of 350 thousand tpy used for the production of hot dipped galvanized steel and products under the trademark “CINCALUM.”

 

   

a continuous painting line for coils with a capacity of 65 thousand tpy fully dedicated to the construction and home appliance markets.

 

   

a cut-to-length line and corrugating machines for the production of a variety of corrugated products.

Rosario (formerly Laminfer). This facility is located in Rosario, Santa Fe province, approximately 300 kilometers north of the city of Buenos Aires. This facility provides steel tubes welded by electrical resistance with a capacity of 95 thousand tpy for structural used.

San Luis (formerly Impeco). This facility is located in San Luis, San Luis province approximately 800 kilometers north west of the city of Buenos Aires. This facility provides steel tubes welded by electrical resistance with a capacity of 45 thousand tpy for structural used.

Venezuela

Sidor is Ternium’s Venezuelan integrated steel manufacturing complex with flat and long steel production capabilities. It is located close to the city of Puerto Ordaz, in the industrial zone of Matanzas on the banks of the Orinoco River. This prime location connects the facilities directly to the Atlantic Ocean.

The following table presents the annual production capacity of the major operational units of the complex located in Venezuela as of December 31, 2006, the year in which operations started for the relevant units and the year of the last major overhaul:

 

30


Table of Contents
     Capacity    Start year    Year of last
major overhaul
     (Thousand tpy)          

Pelletizing Plant

   8,000    1979    2004

Direct Reduction Plant

   4,800    1976/1978/1980(1)    2006

Slabs Steel Shop

   3,600    1978    2004

Hot Rolling Mills

   2,800    1973    2005

Cold Rolling Mills

   1,700    1974    2005

Tinning Mills

   200    1973    2005

Billets Steel Shop

   1,400    1979    2003

Wire Rod

   600    1979    2004

Bar Mill

   460    1979    2000

(1) The three years correspond to the start years of the three direct reduction modules.

The complex includes:

 

   

a pellet plant that produces pellets used as raw materials in the production of direct reduction iron, or DRI, with a total capacity of 8.0 million tpy;

 

   

three types of direct reduction technologies to produce DRI: a continuous bed reduction technique using Midrex I (1.1 million tpy) and Midrex II (3.0 million tpy) technologies with an aggregate production capacity of 4.1 million tpy; and one fixed bed reduction technique using HYL II technology with a total production capacity of 0.7 million tpy;

 

   

a steel making plant, that comprises four 200-ton electric arc furnaces, two 190-ton electric arc furnaces for secondary metallurgy and three two-strand continuous slab casting machines with a capacity of 3.6 million tpy;

 

   

a hot rolling mill, that comprises a six-strand continuous hot strip roller with a capacity of 2.8 million tpy;

 

   

a cold rolling mill with a capacity of 1.7 million tpy, with two pickling lines, one electrolytic cleaning line, two five-stand tandem cold reduction lines, two annealing bays, three temper/skin pass scissors lines and finishing lines;

 

   

facilities for the production of billets that include two 150-ton electric arc furnaces and two six-stand continuous billets casting machines with a capacity of 1.4 million tpy;

 

   

facilities for the production of wire rod, that comprise an eight-stand rolling mill with two lines and finishing rolling facilities with a capacity of 0.6 million tpy;

 

   

facilities for the productions of bars that comprise a finishing four-stand rolling line with a capacity of 0.46 million tpy; and

 

   

a port located on the Orinoco River, 195 miles from the Atlantic Ocean, that operates 11 cranes for the loading and unloading of finished products and raw materials, respectively. The dock is 1,037 meters long and allows the docking of six ships of up to 20 thousand tons.

Mexico

Ternium conducts operations through facilities located in the Mexican cities of Monterrey, Apodaca and Puebla. Furthermore, Ternium sources all of the iron ore used in its Mexican facilities from its mines located in Colima and Michoacán, and refines that iron ore into DRI using proprietary technology. If and when we consummate the Grupo Imsa transaction referred to elsewhere in this annual report, we will add additional production facilities in Mexico.

 

31


Table of Contents

Monterrey. Ternium’s facilities at San Nicolás de los Garza, located in Monterrey’s metropolitan area, include:

 

   

a steel making plant that comprises two electric arc furnaces, two ladle furnaces, two thin-slab continuous casters and a hot rolling mill (Mill No. 2);

 

   

a hot rolling mill (Mill No. 1);

 

   

two DRI facilities: one adjacent to Mill No. 2 that includes the latest DRI HYL® technology advances, such as Hytemp®, which permits the hot discharge of the DRI to the electric arc furnace generating significant energy savings and improving productivity;

 

   

two pickling lines, four reversing cold mills, annealing ovens, two temper mills, a skin-pass mill and tension leveling equipment, each of which is shared by both mills;

 

   

three galvanizing lines with a total annual capacity of 500,000 tons;

 

   

three painting lines with a total annual capacity of 300,000 tons;

 

   

ten tubing mills with an annual capacity of 290,000 tons;

 

   

three panel lines with a total annual capacity of 2.5 million square meters; and

 

   

a steel service center that produces a variety of specialized products, with a total annual capacity of 544,000 tons.

The following table summarizes the annual production capacity as of December 31, 2006 (which does not represent the combined capacity of all the lines operating simultaneously) for the different flat steel production lines at the Monterrey facilities:

 

Facility

  

Product

   Capacity
          (Thousands tpy)

Direct Reduction Plants

   DRI    1,620

Mill No. 1 Hot Rolling Mill

   Hot rolled coils       650

Mill No. 2 Continuous Casting Mill

   Hot rolled coils, ultra-thin hot band    1,850

4 Cold Mills

   Cold rolled coils       790

3 Galvanizing Lines

   Galvanized and coated sheets       510

3 Painting Lines

   Pre-painted sheets       240

10 Tubing Mills

   Thin tubing       320

3 Panel Lines

   Insulated steel panels   

    2,500(1)


(1) Measured in square meters.

The primary raw materials required for the Monterrey facilities’ production of steel include DRI, which Ternium produces in its own direct reduction facilities, and/or other iron material in combination with steel scrap that Ternium buys in the domestic or international markets. Ternium’s materials procurement policy is described in greater depth in the section entitled “—Raw Materials and Energy.”

Next to Ternium’s Monterrey facilities is the Acerex service center dedicated to processing steel to produce slitted and cut to length products in various widths and lengths. Acerex has a total annual capacity of 544 thousand tons. Acerex was a joint venture and in April 2006, Ternium acquired (through its subsidiary Hylsa) the remaining 50% ownership interest. Hylsamex (through its subsidiary Hylsa) owns 100% of Acerex. Acerex functions as a cutting and processing plant for Ternium’s Mexican operations and an independent processor for other entities.

The North Plant—Apodaca. Located in Apodaca, Nuevo León (near Monterrey, Mexico), the North Plant is dedicated exclusively to the production of rebar. This plant uses 100% steel scrap as metallic input for its operations, and includes an

 

32


Table of Contents

electric arc furnace, a continuous caster, a reheating furnace and a rolling mill. Installed production capacities for the different production lines of the North Plant are set forth in the following table:

 

Facility

  

Product

   Capacity
          (Thousands tpy)

Billets Steel Plant

   Billet    580

Rolling Mill

   Rebar    460

The Puebla Plant—Xoxtla. Located in Xoxtla, Puebla (120 km from Mexico City), the Puebla Plant produces both rebar and wire rod, including high-carbon, low-carbon and micro-alloyed wire rod. The Puebla Plant has a direct reduction facility to produce DRI, one electric arc furnace, a ladle furnace, a vacuum degassing station, one continuous caster, a reheating furnace and rolling and finishing mills. Installed production capacities for the different production lines of the Puebla Plant are set forth in the following table:

 

Facility

  

Product

   Capacity
          (Thousands tpy)

Direct Reduction Plant

   DRI    840

Billets Steel Plant

   Billet    760

Rolling Mill

   Rebar and wire rod    580

Las Encinas mines. Las Encinas is composed of three separate iron ore mines: Aquila and Cerro Náhuatl, which are in operation and El Encino, which is currently idle. All of them are located near its pelletizing plant, in the Mexican State of Colima, with a maximum annual capacity of 1.8 million metric tons.

 

   

Aquila is an open-pit mine in Michoacán, Mexico, which began operations in 1998 and is the largest mine at the Las Encinas site. Aquila has the highest percentage of iron content among the Las Encinas mines, and has the option of producing raw iron ore lump that can be used directly in the DRI plants mixed with pellets. Ore mined at Aquila is transported to the pelletizing facility by rail and truck.

 

   

Cerro Náhuatl is an open-pit mine in Colima, Mexico, which began operations in 1988. Cerro Náhuatl has the lowest percentage of iron content among all of Ternium’s mines at Las Encinas, and therefore has the lowest ore processing efficiency. Ore mined at Cerro Náhuatl is transported to Ternium’s pelletizing facility through a seven kilometer slurry pipe and then 42 kilometers by rail.

 

   

El Encino is an underground mine in Jalisco, Mexico, which began operations in 1998 and is not currently in use, as the Aquila mine is a less expensive option for supplying iron ore. An open-pit mine called El Encino was previously operated on the same site from 1970 to 1998. Ore mined at El Encino is shipped to the pelletizing facility by gondola cable cars.

Ternium’s mining operations at Las Encinas are flexible, giving Ternium the ability to halt production at one or more of its mines from month to month depending on market conditions. Annual production capacities for the different production lines of the Las Encinas mines are set forth in the following table:

 

Facility

  

Product

   Capacity
          (Thousands tpy)

Crushing Plant

   Crushed ore    4,800

Concentration Plant

   Concentrated    1,920

Pelletizing Plant

   Pellet    1,900

For further information please refer to “—Production Process—Mexico.”

 

33


Table of Contents

Peña Colorada mine. The Peña Colorada mine consists of a single large mining site located in Minatitlán, Colima, Mexico. The mine is an open-pit mine which began operations in 1975, and has a production capacity of 8.5 million tons of crushed iron ore per year. There is one pelletizing plant serving the Peña Colorada mine, with a total installed production capacity of 4.0 million tons of iron ore pellets per year plus and additional 0.4 million tons per year of pellet feed. Peña Colorada has convenient access to seaport and railroad facilities that enables the distribution of the iron ore pellets to the domestic and international markets.

Peña Colorada is operated by Consorcio Minero Benito Juárez Peña Colorada, S.A. de C.V., which has two shareholders—Hylsamex and Mittal Steel Lazaro Cárdenas (“MSLC”), a subsidiary of the Mittal Steel group. Through Hylsamex, Ternium holds 50% plus one share of Peña Colorada and MSLC holds the remainder. Hylsamex purchases one half of the mine’s production. See “—Raw Materials and Energy—Mexico—Iron ore.” Annual production capacities for the different production lines of the Peña Colorada mine are set forth in the following table:

 

Facility

  

Product

   Capacity
          (Thousands tpy)

Crushing Plant

   Crushed ore    8,500

Concentration Plant

   Concentrated    4,400

Pelletizing Plant

   Pellet    4,000

For further information please refer to “—Production Process—Mexico.”

Production process

Ternium specializes in manufacturing and processing flat and long steel products. In the case of flat products, slabs are reheated and taken to rolling temperature. This treatment removes minor superficial defects and softens the steel to permit its transformation in the hot rolling mill to defined specifications. Hot rolled coils and sheets can be processed with or without scaling, according to the clients’ uses and needs.

Hot rolled products can also be put under a deformation process at normal temperature (cold rolling) to reduce their thickness and obtain cold rolled products. These products can be sold in crude form to the market (full hard) or processed in the reheating ovens, annealing bays and tempers lines, to modify their metallurgic and geometric characteristics. The tempered products can be sold as coils or sheets or processed with chromium or tin coverings.

In the production of long products, billets are reheated and taken to rolling temperature. As in the case of slabs, this treatment removes minor superficial defects and softens the steel to permit its transformation in the rolling trains to obtain wire rods and bars as final products.

The production processes in Ternium’s facilities in Argentina, Venezuela and Mexico differ in certain respects. We include a brief description of the different processes below.

Argentina

Ternium’s Argentine subsidiary, Siderar, is the primary integrated manufacturer of flat steel products in Argentina. Siderar produces crude steel through the use of blast furnaces, which are large chambers lined with refractory bricks used to make pig iron through the melting of pellets, sinter (a mixture of iron ore and limestone) and coke. The molten pig iron is then mixed with steel scrap and limestone in a basic oxygen furnace through a process that removes impurities from the pig iron by injecting pure oxygen at high pressure into the molten metal, burning-off carbon and other elements. The molten steel is then cast using the continuous casting method into slabs. The steel slabs are then sent to a hot rolling mill to be reheated and rolled into hot rolled coils.

Depending on its final use, the hot rolled coil is then scaled, tempered and pickled, before being sent for sale as coil or cut into steel sheet. Alternatively, the hot rolled coils may be sent to a cold rolling mill for use as an input in the production of

 

34


Table of Contents

cold rolled coils. In certain cases, cold rolled coils are processed in an electrolytic cleaning line, an annealing line and a two-stand temper mill to produce thin steel used to produce tin plate.

Cold rolled coils can be further processed into galvanized or electro galvanized sheets (by adding a thin layer of zinc to the products through different processes), tin plate (by adding a thin layer of tin) or pre-painted products. Siderar can also process its production into cut-to-length and tailor made products according to its customers’ needs.

Venezuela

In Venezuela, Ternium’s subsidiary Sidor manufactures a wide variety of steel products ranging from semi-finished products such as slabs and billets to finished products such as hot, cold and coated flat products and wire rod and bar long products.

Sidor produces steel through the direct reduction of iron ore, and the use of electric arc furnaces that are complemented by secondary metallurgy equipment to assure product quality.

The first step of the production process is the agglomeration of iron ore minerals in the pellet plant. The pellets obtained are further processed in the direct reduction furnaces, to obtain DRI that can be used as raw material in the electric arc furnaces to produce steel.

The resulting molten steel, which is obtained using primarily DRI, has a high quality and low content of residues and impurities. The molten steel is then refined in the secondary metallurgic facilities, where it is mixed with ferroalloys. The steel is afterwards casted into semi-finished products (slabs or billets) that are destined for the production of flat or long products, respectively.

Mexico

In Mexico, Ternium’s subsidiary Hylsamex manufactures a variety of steel products, including hot rolled coils and sheets, cold rolled coils and sheets, rebar and wire rod, tubular products, such as welded pipes, and processed steel products including galvanized steel, pre-painted steel, mechanical tubular products and insulated panels.

The production process begins with the sourcing of iron ore from Ternium’s own mines in Mexico. The extraction consists of drilling, loading and transporting the iron ore to a grinding facility in order to reduce it to a specified size and quality through the grinding process and the separation of ore with low iron content.

The ore is then shipped to the pelletizing plant, where is gradually fed into a grinding mill to be reduced to a certain size. After grinding, the ore goes through magnetic drums that separate the iron from the sterile material. The grinding and concentration processes are repeated two more times in order to eliminate all the possible sterile material, concentrate the iron to obtain a pellet with high iron content. These processes are carried out using water as an auxiliary element. Excess water is afterwards eliminated, leaving only the necessary humidity for the formation of pellets using pelletizing disks. Pellets are separated according to their size and are then hardened in ovens. The processed pellets are then shipped to the steel producing facilities for the DRI process. Next, the electric arc furnaces melt a combination of steel scrap and DRI to produce liquid steel.

For flat products, molten steel is casted into slabs using state-of-the-art technology that produces thin slabs, which then are rolled into hot and cold rolled coils. The steel is then further processed to higher value-added products such as galvanized and prepainted steels, as well as tubing, insulated panels andarchitectural panels, etc.

Finally, for long products, molten steel is cast into steel billets that are rolled into rebar and wire rod, such as tire cord and cold heading qualities.

One of Monterrey’s DRI plants includes the latest DRI HYL® technological advances, such as Hytemp®, which permits the hot discharge of the DRI to the electric arc furnace generating significant energy savings and improving productivity. The use of state-of-the-art proprietary technology allows Hylsamex’s production in Mexico to accommodate higher proportions of steel scrap and other metallic charge when high natural gas prices make DRI more expensive to produce.

 

35


Table of Contents

Sales and Marketing

Net Sales

Ternium primarily sells its steel products in the regional markets of North America and Central and South America, where it can leverage its strategically-located manufacturing facilities to provide specialized products and delivery services to its clients.

Our total net sales amounted to USD6.6 billion in 2006, USD4.4 billion in 2005 and USD1.6 billion in 2004. For further information on our net sales see Item 5. “Operating and Financial Review and Prospects—A. Results of Operations”.

The following table shows Ternium’s total consolidated net sales by product and geographical region in terms of U.S. dollars for the years indicated:

 

In thousands of U.S. dollars

   For the year ended December 31,
   2006    2005    2004

Flat Steel Product Sales

        

South and Central America

   3,038,369    2,384,649    999,567

North America

   1,960,793    948,852    94,299

Europe and Other

   48,365    326,926    172,331
              

Total Flat Steel Products Sales

   5,047,527    3,660,427    1,266,197
              

Long Steel Product Sales

        

South and Central America

   526,780    370,634    —  

North America

   735,823    252,576    —  

Europe and Other

   —      2,158    —  
              

Total Long Steel Product Sales

   1,262,603    625,368    —  
              

Trading Sales(1)

        

South and Central America

   —      —      116,624

North America

   —      —      136,530

Europe and Other

   —      —      72,073
              

Total Trading Sales

   —      —      325,227
              

Total Other Sales(2)

   258,845    161,885    7,501
              

Total Sales

   6,568,975    4,447,680    1,598,925
              

(1) The item “Trading Sales” includes mainly trading activities for the year ended December 31, 2004. The consolidation of Amazonia’s results since February 15, 2005 resulted in the elimination of intercompany sales between Sidor and Ternium’s subsidiaries, following which trading activities are no longer material.
(2) The item “Other Sales” includes mainly sales of pig iron and iron ore.

 

In thousands of tons

(unaudited)

   For the year ended December 31,
   2006    2005    2004

Flat Steel Product Sales Volume

        

South and Central America

   4,361    3,463    1,718

North America

   2,413    1,406    147

Europe and Other

   88    514    311
              

Total Flat Steel Product Sales Volume

   6,861    5,383    2,176
              

Long Steel Product Sales Volume

        

South and Central America

   948    709    —  

North America

   1,225    503    —  

Europe and Other

   —      5    —  
              

Total Long Steel Product Sales Volume

   2,174    1,218   

Trading Sales Volume(1)

        

South and Central America

   —      —      159

North America

   —      —      246

Europe and Other

   —      —      142
              

Trading Sales Volume

   —      —      546
              

Total Sales Volume(2)

   9,035    6,600    2,722
              

(1) The item “Trading Sales Volume” includes mainly trading activities for the year ended December 31, 2004. The consolidation of Amazonia’s results since February 15, 2005 resulted in the elimination of intercompany sales between Sidor and Ternium’s subsidiaries, following which trading activities are no longer material.
(2) The “Total Sales Volume” does not include the tons of Other sales.

 

36


Table of Contents

South and Central America

Sales to customers in South and Central America accounted for 56.4% of Ternium’s consolidated sales during 2006, 63.1% during 2005 and 70.3% during 2004. See Item 5. “Operating and Financial Review and Prospects—A. Results of Operations—Fiscal year ended December 31, 2006 compared to fiscal year ended December 31, 2005—Net sales” and —Fiscal year ended December 31, 2005 compared to fiscal year ended December 31, 2004—Net sales.”

Ternium’s sales are oriented toward the construction and agriculture industry, the packaging and canning sector (especially for food, paints and sprays), the tube and pipe sector (related to liquids and gas transportation and distribution networks), the automotive industry, the home appliances sector and service centers that further process Ternium’s steel products to attend to particular requirements of steel users.

Ternium serves industrial clients (such as those of the automotive industry) that require customized products that it can produce through its service centers and finishing facilities, as well as commercial clients that further process steel. The customer base in South and Central America consists primarily of independent small- and medium-sized companies and distributors, which in turn process or retail the products to their customers in different market sectors.

Ternium’s principal clients in the region are located in Argentina and Venezuela. Its sales in these countries are sensitive to the general economic conditions and government actions and policies, such as the restrictions in Argentina and Venezuela on certain foreign currency transfers. For further information on the risks related to an investment in Argentina or Venezuela please refer to Item 3. “Key Information—Risk Factors—Risks Relating to the Countries in Which We Operate.” We also sell to clients in other South American countries, including Colombia, Ecuador, Chile and Peru.

North America

Sales to customers in North America accounted for 42.1% of Ternium’s consolidated sales during 2006, 29.0% during 2005 and 14.4% during 2004. See Item 5. “Operating and Financial Review and Prospects—A. Results of Operations—Fiscal year ended December 31, 2006 compared to fiscal year ended December 31, 2005—Net sales” and —Fiscal year ended December 31, 2005 compared to fiscal year ended December 31, 2004—Net sales.”

Ternium’s largest markets in North America are Mexico and the United States.

Most of Ternium’s Mexican customers are located near its plants in Puebla and Monterrey. The main markets for flat steel in Mexico are the construction industry, industrial customers in the packaging, electric motors, service center industries, distributors and auto parts manufacturers. The principal segments in the Mexican coated steel market are construction, manufacturing (air conditioning, lamps and furniture), appliances and auto parts. Ternium generally serves industrial clients that require high quality specifications, as well as commercial clients through service centers and warehouses. The rebar and wire rod markets in Mexico are generally characterized by a large number of orders of small volume, and competition is largely based on price. The customer base for bar and rod products in Mexico consists primarily of independent dealers and

 

37


Table of Contents

distributors, who in turn retail the products to their customers in the construction industry. Ternium markets its tubular products mainly through Mexican independent distributors, and the balance is sold directly to industrial clients.

Clients in the United States of America are served directly through the commercial offices, distribution and service centers of Ternium, which manage transport and logistics issues and provide local services and assistance. The Gulf Coast and a large portion of the West Coast, in particular, are fast growing regions in which our Hylsa’s facility is highly competitive. The main markets in the United States are the construction industry and the energy market and its related steel consumption.

Europe and Other

Sales to customers in Europe and other markets accounted for 1.5% of Ternium’s consolidated sales during 2006, 7.9% during 2005 and 15.3% during 2004. See Item 5. “Operating and Financial Review and Prospects—A. Results of Operations—Fiscal year ended December 31, 2006 compared to fiscal year ended December 31, 2005—Net sales” and —Fiscal year ended December 31, 2005 compared to fiscal year ended December 31, 2004—Net sales.”

Ternium’s largest markets in Europe are Spain and Italy. Clients in Europe are mainly independent, small- and medium-sized companies dedicated to steel processing. A large part of their purchases are of cold rolled coils and coated products, which are mainly produced in Argentina. Their production is generally directed toward the construction, furniture and appliance industries. Ternium’s sales to Europe are carried out through the Ternium commercial network. While Ternium profits from a long-term relationship with most of its European clients, sales orders are in general received on a monthly basis at spot prices.

Sales to Asia are generally made on a spot basis and include overrolling materials.

Pricing

The prices of our steel products generally reflect international market prices for similar products. We adjust prices for our products periodically in response to changes in the import prices of foreign steel, export prices, and supply and demand. See Item 5. “Operating and Financial Review and Prospects—Overview.” The actual sales prices that we obtain for our products are also subject to the specifications, sizes and quantity of the products ordered.

Marketing

Our marketing strategy is to:

 

   

continue to shift Ternium’s sales mix towards higher margin value-added products and services. We expect to increase Ternium’s offerings of value-added products such as cold rolled sheets and coated and tailor-made products, and services, such as just-in-time deliveries and inventory management. In order to do so, Ternium will continue to work with clients to anticipate their needs and develop customized products for particular applications; and

 

   

maximize the benefits arising from Ternium’s broad network of distribution, sales and marketing services. We expect to continue to expand Ternium’s customer base and to increase its services in major steel markets. We plan to develop Ternium’s sales and logistic services through its commercial network, including import operations, stock administration, and delivery and storage programs.

Ternium maintains a strategic presence in several major steel markets through its network of commercial offices, which allows it to reach clients principally outside its regional markets.

Ternium adapts its strategy according to the different regions it serves. Its sales force specializes in different regional requirements ranging from product specifications to transport logistics.

In order to increase Ternium’s participation in regional markets and improve services provided to customers, Ternium consolidated its international sales and marketing activities through Ternium Internacional’s network of commercial offices. Ternium Internacional develops its services through branches, which are 100% fully owned by Ternium Internacional and are

 

38


Table of Contents

strategically located in the Ternium’s key markets. Ternium Internacional has a strong presence in the main steel markets such as the Americas and Europe and has extensive experience promoting steel products. Its marketing expertise helps Ternium to expand its position in current markets and in developing new ones.

South and Central America

A principal component of Ternium’s marketing strategy in South and Central America is establishing lasting and close relationships with customers. This allows Ternium to provide assistance to its customers in their use of steel products and to obtain downstream information that can be applied to future product development.

In 2003, Ternium’s Argentine subsidiary Siderar established a department focused on the development of small- and medium-sized companies, under a program created by the Techint Group for the development of its clients and the local industry. The objective of the program is to improve the competitiveness of clients and suppliers, to increase their exports and allow them to substitute imports for local products. Nearly 140 companies are part of this program, which provides support for the commercial, financial, industrial and institutional requirements of these companies. Propymes was also implemented in Venezuela in 2004, with the same objective of promoting local industry.

Ternium’s sales force in this region is oriented toward serving the specific needs of different market sectors, such as the construction industry, the packaging and canning sector (especially for food, paints and sprays), the tube and pipe sector (related to liquids and gas transportation and distribution), the automotive industry, the home appliances sector and steel processors. Through its service centers, Ternium can cut, paint or conform its products to specific client requirements. Customized products include metallic roofing, auto parts, steel for agricultural machinery, different types of tin used to produce sprays and food containers and cut-to-length products used in the home appliance and construction industries.

In addition to its offices located in Argentina and Venezuela, Ternium has commercial and administrative offices in Brazil, Colombia, Ecuador, Peru and Uruguay. These offices generally provide commercial services such as the development and maintenance of contacts with clients and end users, analysis of businesses opportunities, assistance to buyers before and after sales, participation in price negotiations, analysis of the market and competitors and assistance in the design and organization of the commercial and promotional strategy for sales in the respective countries.

North America

The North American steel market is highly competitive, since most major international steel producers’ direct part of their sales efforts to this region. The 2005 Hylsamex acquisition significantly increased North America’s importance to Ternium’s overall sales. We expect that our sales of flat steel products will increase significantly if we complete the acquisition of Grupo Imsa. On April 29, 2007, we entered into a definitive agreement pursuant to which we expect to obtain control over Grupo Imsa, a steel manufacturer with operations in Mexico, United States and Guatemala. The transaction is subject to Mexican and U.S. antitrust clearances, and other customary conditions. For more information, see Item 5. “Operating and Financial Review and Prospects—G. Recent Developments—(a) Agreement to obtain control over Grupo Imsa”.

In Mexico, where Hylsamex’s production facilities are located, it can provide customized services and deliveries. Ternium’s principal steel clients in Mexico are in the construction and manufacturing industries (including steel furniture, automotive and electric and home appliances).

Mexico’s steel market is strongly oriented toward end users, representing 54% of Hylsamex’s domestic sales in both 2005 and 2006. In addition, several Mexican steel producers compete with Hylsamex in the flat and long steel markets, including Ahmsa, Grupo Imsa, Arcelor Mittal, DeAcero S.A. de C.V., or DeAcero, and Aceros San Luis S.A. de C.V., or Aceros San Luis. Ternium’s experienced sales force specializes in the needs of each market sector and focuses on value-added products and services. In this competitive and end-user oriented market, the extensive use of well-known commercial brands allows customers to clearly recognize Ternium’s products. Ternium seeks to increase its competitive advantage by providing value-added services, including the Technical assistance related to steel use and production, and developing new steel products.

 

39


Table of Contents

Ternium has a commercial presence in the United States, including offices and warehouses in Houston, Atlanta, Laredo and Phoenix. From these locations, Ternium provides steel products and related services: logistics, stock management and customer assistance.

Europe and Other

Sales to Europe and the other markets are carried out through a commercial office located in Spain. This office is focused on activities such as trading. It is also responsible for the development of commercial and marketing activities in order to expand Ternium’s client base, the organization of provision programs and activities to promote steel products and the assistance in the purchase process for finished and semi-finished steel for Ternium. It also provides services related to other commercial requirements, such as credit risk analysis and credit risk insurance, follow up on orders and other customer support.

Competition

Global Market

The steel industry operates predominantly on a regional basis, with large industry participants selling the bulk of their steel production in their home countries or regions, where they have natural advantages and are able to more effectively market value-added products and provide additional customized services. Despite the limitations associated with significant transportation costs, as well as the restrictive effects of protective tariffs and other trade restrictions, international trade of steel has generally increased in the last decade as production has shifted towards low-cost production regions. In addition, since 2002, several large steel manufacturers have merged with each other or acquired steel companies in other parts of the world. This wave of consolidation has resulted in a number of large, global producers with significant operations in several regions and/or continents, contributing to the increasing globalization of the steel industry. Considered as a whole, however, the steel industry still remains considerably fragmented, compared to certain key suppliers and customers, e.g. iron ore suppliers and the automotive industry.

Steel consumption has historically been centered in developed economies such as the United States of America, Western Europe and Japan. However, in recent years steel consumption in Asia, and in particular China, has increased significantly. Moreover, while production in Europe, Japan and the United States remains significant, steel producers in those regions have increasingly focused on the rolling and finishing of semi-finished products.

There has been a trend in recent years toward steel industry consolidation among Ternium’s competitors. For example, Aceralia, Arbed and Usinor merged in February 2002 to create Arcelor, and LNM Holdings and Ispat International merged in October 2004 to create Mittal Steel, which subsequently acquired International Steel Group. Furthermore, in June 2006, Mittal Steel and Arcelor merged to create the world’s largest steel company, Arcelor Mittal. In April 2007, Tata Steel completed the acquisition of Corus. Despite this trend, the global steel market remains highly fragmented. In 2004, the five largest producers (Mittal Steel, Arcelor, Nippon Steel, JFE and POSCO) accounted for approximately 19% of total worldwide steel production, with Arcelor Mittal, the largest, accounting for less than 10%. Also in 2006 and 2005, the five largest steel producers accounted for 19% and 18%, respectively, of total worldwide steel production (compared to 15% in 2000).

Steel prices in general, including for both flat and long products, have undergone significant volatility in recent years. From 2000 to 2002, the industry, especially in North America, experienced fluctuating capacity, low demand growth levels and other adverse conditions, which led to depressed steel prices and also adversely impacted many steel producers’ profitability. In 2003 and 2004, steel prices increased worldwide, due to higher economic growth in most regions, particularly China and other developing countries, as well as higher raw material prices (iron ore, ferroalloys and energy). Prices decline in the last quarter of 2004 and the first half of 2005, partially due to inventory liquidation, but recovered in the second half. Although prices in 2005 were below the 2004 peak, they remained well above the ones from 2000 to 2002. In 2006, prices increased in the first half of the year due to better global economic performance and declined in the second half, but remained on average above 2005 levels. In 2007, the construction and automotive industry’s activity in the United States of America experienced a slightly increase, which affected the international steel prices.

 

40


Table of Contents

Given the strong competition that characterizes the flat steel industry; several countries have imposed trade restrictions to protect their domestic steel industries from imports at below market conditions, commonly referred to as “dumping.” For a summary description of some of these regulations, see “—Regulation—Trade regulations.”

South and Central America

Ternium competes against importers of flat steel products in Argentina and Venezuela, countries in which Ternium is a leading domestic producer. Producers of flat steel products usually enjoy a strong competitive position in their domestic markets due to logistical and other advantages that allow them to offer value-added services and maintain strong relationships with domestic customers. Ternium’s subsidiaries have established strong ties with major consumers of flat steel products in their home markets, which have been reinforced by customized delivery arrangements.

Argentina. Ternium’s subsidiary Siderar is the main producer in Argentina of flat rolled steel products and faces little competition from domestic steel producers across the majority of its product lines. Its main competition in the Argentine flat steel market is limited to imports, mainly from Brazil. The main Brazilian producers of flat steel value-added products are Usiminas (a shareholder of the Company), Companhía Siderúrgica Nacional and Companhia Siderúrgica de Tubarão (part of the created Arcelor Brasil). In the market for intermediate products for the manufacture of structural pipes, Ternium competed in the past with Acindar, an Argentine company mainly dedicated to the production of long steel products which had a minor share in the flat steel market. On January 31, 2006, Siderar acquired assets and facilities of Acindar related to the production of welded steel pipes in the province of Santa Fe in Argentina and 100% of the issued and outstanding shares of Impeco S.A., which in turn owns a plant located in the province of San Luis in Argentina for a total purchase price paid of USD55.2 million. These two plants have an annual production capacity of 140 thousand tpy of tubes to be used in the construction, agricultural and manufacturing industries.

We believe that the threat of new competitors entering the Argentine flat steel market is mitigated by:

 

   

Ternium’s substantial domestic market share;

 

   

the specialized service provided locally;

 

   

the high capital investment required to construct an integrated manufacturing facility;

 

   

the scarcity of good quality scrap in Argentina for use in an electric arc furnace “mini-mill”;

 

   

Ternium’s low production costs and its potential ability to expand capacity at a relatively low investment cost compared to building and installing an electric arc furnace “mini-mill”; and

 

   

the significant freight costs in exporting to Argentina, and especially the Buenos Aires area, where most of the flat steel demand is concentrated.

Although Siderar has been the principal flat steel provider in Argentina since its foundation, its market share has been affected by the economic and trade conditions in the country. During the 1990s, Siderar faced increased competitive challenges from outside Argentina as a result of the Argentine government’s trade liberalization policies. See “—Regulation—Trade regulations.”

We believe that Siderar has a competitive advantage over potential foreign competitors based on its ability to customize products to customer specifications, including size and quality. Its position was further improved by the Argentine crisis of 2002 and subsequent devaluation that benefited national industry competiveness.

Venezuela. Ternium’s subsidiary Sidor is the sole producer of flat steel products in Venezuela. Sidor’s only source of competition in the flat steel markets comes from imports. However, imported flat steel products do not account for a significant portion of the Venezuelan market, representing only, on average, an 10% and 8% market share in Venezuela for the year ended December 31, 2006 and 2005, respectively.

 

41


Table of Contents

Sidor is the main producer in Venezuela of long steel products, but it faces competition from other domestic producers of long products. Sidetur, a subsidiary of Sivensa and a minority shareholder of the Company, is Ternium’s primary competitor in the domestic long steel products market. Siderúrgia Zuliana C.A., or Sizuca, also competes, to a lesser extent, for Ternium’s share of the domestic market for long products and, in particular, rebar.

We believe that the threat of new competitors entering the Venezuelan flat and long steel markets is mitigated by:

 

   

Ternium’s substantial domestic market share;

 

   

the high capital investment required to construct an integrated blast furnace manufacturing facility;

 

   

the scarcity of good quality scrap metal in Venezuela for use in an electric arc furnace “mini-mill”; and

 

   

Sidor’s low production costs and its long term agreements with local raw material suppliers. See Item 3. “Key Information—D. Risk Factors—Risks Relating to the Steel Industry.”

The Venezuelan government has announced that it will finance and build an integrated steel complex located in Ciudad Piar, 150 kilometers from Puerto Ordaz, where Sidor is located. The Venezuelan administration has stated that this project, which is still in a preliminary stage, will not compete against Sidor. To the date of this annual report, there have been no developments in connection with this announcement.

North America

Mexico. Ternium’s subsidiary Hylsamex has strong domestic competitors in the Mexican steel market and faces increasing competition from imports. Total imports of flat steel products have increased sharply in recent years and according to Canacero, the Mexican chamber of the iron and steel industry, accounted for 32.7% and 28.8% of the Mexican market in 2006 and 2005, respectively.

The largest Mexican competitor in the flat products market is AHMSA, an integrated steel producer located in Monclova, Coahuila that produces a wide variety of steel products. Another significant domestic competitor in this sector is APM, S.A. de CV., which is a subsidiary of Grupo Imsa. APM processes slabs purchased from third parties to produce hot and cold rolled products for the Mexican market and to supply Grupo Imsa’s coating facilities. On April 29, 2007, we entered into a definitive agreement pursuant to which Ternium, or any of its subsidiaries is expected to obtain control over Grupo Imsa. The transaction is subject to Mexican and U.S. regulatory approvals and other customary conditions. If consummated, the transaction is expected to close in the third quarter of 2007. If and when the Grupo Imsa transaction is consummated, Grupo Imsa will no longer be a competitor in this market.

In the rebar market, Ternium’s largest competitor is Siderúrgica Lázaro Cárdenas—Las Truchas S.A. de C.V. (“Sicartsa”), that is currently part of Arcelor Mittal. To a lesser extent, Ternium also faces competition from Aceros San LuisDeAcero and Grupo Vigil. In the low-carbon wire rod market, Ternium’s main competitors are DeAcero, Sicartsa, and to a lesser extent Aceros San Luis, Talleres y Aceros and imports.

The Mexican domestic market for small diameter welded pipe is regional, and competition from imported products is not significant. Orders are usually small and cover a wide range of product specifications. Hylsamex’s leading competitors in this market are Regiopytsa, Arcometal and Tubería Nacional S.A. de C.V.

The primary customers in the Mexican coated steel market are the construction sector and manufacturing companies (e.g. of air conditioners, home appliances and lighting fixtures). Ternium’s main competitors in this market are IMSA and to a lesser extent Zincacero S.A. de C.V. and Galvasid. If and when the Grupo Imsa transaction referred to elsewhere in this annual report is consummated, Grupo Imsa will no longer be a competitor in this market.

We believe that the threat of new competitors entering the Mexican flat steel market is mitigated by:

 

   

the specialized service provided locally;

 

42


Table of Contents
   

the scarcity of good quality scrap and high energy prices in Mexico for use in an electric arc furnace “mini-mill”;

 

   

Ternium’s low production costs, including its supply of iron ore from its own mines; and

 

   

Ternium’s ability to expand capacity at a relatively low investment cost compared to building and installing an electric arc furnace mini-mill.

Capital Expenditure Program

The sum of the capital expenditures of Siderar, Sidor and Hylsamex in 2006 was approximately USD384 million. The main objectives of the capital expenditure program of Ternium are to:

 

   

reduce production costs;

 

   

improve product quality, equipment reliability and productivity;

 

   

comply with applicable environmental standards; and

 

   

provide enhanced customer services.

Ternium’s plans for financing its capital expenditure program are described under Item 5. “Operating and Financial Review and Prospects—B. Liquidity and Capital Resources”. No assurance can be made that Ternium will be able to obtain the financing necessary to fund its projected capital and environmental remediation expenditures.

Argentina

During 2006, Ternium carried out a significant investment program to increase its production capacity and improve the product quality of its facilities in Argentina. Siderar’s investment in fixed assets amounted to USD208 million. The principal investments initiated or carried out were:

 

   

the expansion of the coke oven plant. The construction of battery No.5 began in 2004 and is expected to start production in September 2007 and increase capacity by 210,000 tpy;

 

   

the relining of blast furnace No. 2. The works in blast furnace No.2 began in 2005 and the relining started in October 2006. The start up was in January 2007;

 

   

the revamping of sinter plant. The work began in 2005 and was completed in September 2006, which resulted in an increased capacity of 4,000 tons per day and improved the environmental conditions;

 

   

the installation of slab reheating furnace No.5 in the hot rolling mill. The work carried out in the hot rolling mill allowed Siderar to roll all slabs in a single greater thickness of 200 millimeters. This work, together with the one carried out in the steel shop, enable Siderar to increase hot rolled coils production from 2.6 to 2.8 million tons per year. The start up was in October 2006.

Siderar investment plan contemplates a significant increase in crude steel production capacity from the current 2.9 million tons to 4.0 million tons to facilitate growth of the manufacturing sector in Argentina and, at the same time, allow Ternium to continue to play an active role in international markets. Besides completing those investments initiated in 2004, the principal investments of the plan are focused on the installation of a new continuous caster and metallurgy equipment, the relining of blast furnace No.1 in two steps, the increase of capacity in Siderar’s sinter plant from 4,000 to 5,000 tons per day and the modernization of the facilities for storage and internal transportation of raw materials.

The plans also contemplate the upgrading of present production lines together with the incorporation of new production lines. We expect that the incorporation of automation systems and the use of available capacity in the services area will improve production efficiency by allowing for economies of scale and operating cost reductions.

 

43


Table of Contents

Venezuela

During 2006, Ternium’s investments in fixed assets in Venezuela amounted to USD77.3 million. The most significant investments and projects carried out or initiated were:

 

   

the revamping of module A of Midrex II. This was carried out in September 2006 and resulted in an increase of the annual production up to 1.1 million tpy of DRI;

 

   

the installation and start up of two deburring machines and a marking machine at the delivery side of the continous casting mill No.3. This project boosts the capacity of the plant for slab requiring proper finishing (deburring and marking);

 

   

the second step of the “Piso de Planta” Project: This project develops and implements an integrated real time management system (industrial and technological) for all of the production lines. This new system is already operative in all the main facilities;

 

   

the installation of an oxygen plant. This new plant consists of two modules of 300 oxygen tons each, which have been operative since October 2006. This new equipment provides the necessary gas to comply with the increases in liquid steel production.

During the next five years, we intend to carry out an investment plan for Ternium’s subsidiary Sidor that would allow it to increase crude steel production capacity from 4.0 million tons to 5.5 million tons, to maintain its equipment and to automate control systems. Among the projects that we expect to carry out in the near future are the revamping of the HYL reduction plant, which is actually in the procurement stage, and it is expected to be operative by December 2008; the installation of a new ladle furnace No.3 in the steel mill, which is currently in progress and is expected to be operative in September 2007; the revamping of the steel shop material handling system, the modernization of the delivery side of the slab caster machines.

Mexico

Hylsamex’s subsidiaries underwent a substantial modernization program prior to their acquisition by us. In the last 15 years, Hylsamex has spent approximately USD1.9 billion on projects focused on developing Hylsamex as an integrated manufacturer of value-added products. The main investments carried out were in flat steel mini-mills, the preparation and modernization of mines, the modernization of long steel facilities and the development of DRI plants and coated steel production lines.

During 2006, Hylsamex invested USD97.1 million to increase its hot rolling and galvanizing production capacity. The most significant investments and projects carried out or initiated were:

 

   

the revamping of the hot rolling mill No.1. This includes the installation of a new walking-beam slab furnace expected to start-up during September 2007, and that will provide an additional rolling capacity of 400 million tpy;

 

   

the revamping of the galvanizing line No.3. This project is expected to be operational during July 2007, will provide additional strip galvanizing capacity for 40 thousand tpy.

Some of the main investments planned for in the next five years are the modernization of hot rolling Mill No.1, the opening of the Colomera mine site at Las Encinas complex, the modernization of certain coating facilities and several information technology, or IT, systems projects. In addition to these investments, management is considering capital expenditures aimed at routine maintenance or replacement of equipment. If and when we consummate the Grupo Imsa transaction referred to elsewhere in this annual report, we will re-estimate the costs of our investments in Mexico.

 

44


Table of Contents

Information technology investments

In addition to capital expenditures at its plants, Ternium has invested in the integration of its production, commercial and managerial activities. Some of the main IT investments relate to the development of new software for its management platforms. The first project requires a significant technological change in Ternium’s systems and will provide users with a new set of management tools on a proprietary platform for the manufacturing, selling and distribution of Ternium’s products. Another project is expected to develop technological tools for related sectors such as human resources, finance and other administrative sectors. The Ternium companies invested an aggregate of approximately USD18.4 million in IT projects in 2006.

In 2007-2008, we expect to invest in IT projects that will facilitate the integration and synergies of Ternium’s subsidiaries and improve the security measures over their IT systems, and to continue developing the projects indicated in 2006.

Raw Materials and Energy

At Ternium’s integrated steel facilities in Argentina and Venezuela, the principal raw materials Ternium consumes are iron ore, coal and ferroalloys. These are processed in blast or electric arc furnaces and afterwards in steel shops to obtain either slabs, which are further processed into value-added flat steel products, or billets, which are further processed into wire rods and bars. At Ternium’s electric arc facilities in Mexico, the principal raw materials are pellets and scrap. Another important raw material for Ternium’s production processes is energy. Below is a more complete description of the raw material and energy situation at Ternium’s integrated facilities in these countries. For a description of some of the risks associated with Ternium’s access to raw materials, see Item 3. “Key Information—D. Risk Factors—Risk Relating to the Steel Industry—Price fluctuations or shortages in the supply of raw materials and energy could adversely affect Ternium’s profits.”

Argentina

In Argentina, Ternium’s subsidiary Siderar produces crude steel through the use of blast furnace technology. Siderar is the primary integrated manufacturer of flat steel products in Argentina, with an installed capacity of 2.9 million tons of crude steel. The principal raw materials used to produce steel are iron ore and coal. Important amounts of electricity and natural gas are also used in the manufacturing process.

Iron ore. Iron ore is purchased under long-term agreements from suppliers in neighboring Brazil. Prices under these contracts are determined on an annual basis in accordance with market conditions and follow the prices agreed upon between the major iron ore exporters and their main steel industry clients. Siderar’s aggregate annual consumption of iron ore in Argentina ranges between 3.2 and 3.5 million tons. Approximately 80% of Ternium’s local requirements for iron ore in different forms, such as pellets and sinter feed (iron ore fines smaller than 6 mm) is supplied by Brazil’s Companhia Vale Do Rio Doce, or CVRD. The remaining requirements consist of lump ore (i.e., iron ore within certain size specifications ranging from 6 to 38 mm) from other suppliers located in Brazil, such as Mineração Corumbaense Reunida S.A., or MCR, a Rio Tinto subsidiary. The main contracts for these raw materials are with CVRD and MCR. Siderar’s geographic location provides favorable access to high quality lump produced in Brazil’s iron ore mines which are located in the Pantanal Region (Mato Grosso do Sul state) through the Paraguay and Paraná Rivers. The use of barges to haul this lump ore, reduces the raw material costs associated with the provision of iron ore since those mines are outside of the international seaborne trade. The costs for iron ore in the seaborne trade, which represents imports from Brazil into Argentina, has steadily increased since 2003, with successive price hikes in the following years up to an increase of more than 71% for some types of iron ore. However, 2006 prices depicts the price correction operated in the international markets with significant increases of almost 20% for some types of iron ore and decreases of up to 3% for others.

Coal. Siderar obtains its coke through the processing of coking coal and petroleum coke in its coke ovens. Siderar requires different types of coal to produce coke. Coal is mainly purchased under annual renewable contracts with long term commercial suppliers. Siderar uses different international suppliers depending on the different types of coal used in the process, including Anglo Coal, BHP Billiton/Mitsui Alliance, Xstrata/Glencore and Jim Walter Resources Inc. The amount purchased from each supplier depends on mainly technical quality requirements of the blast furnace operations and to a lesser

 

45


Table of Contents

degree on commercial conditions. Estimated consumption of coal and petroleum coke is approximately 1.5 million tpy. Petroleum coke is sourced domestically from producers such as Exxon Mobil and Repsol YPF.

Electricity. Siderar consumes large quantities of electricity (approximately 135 Mw) for its manufacturing activities, particularly in its Ramallo and Ensenada facilities. The electricity required to cover most of Siderar’s needs is self-generated by a wholly-owned thermoelectric plant with an installed capacity of 110 Mw located at the Ramallo facility. Most of the energy requirements of the thermoelectric plant are obtained from blast furnace and coke oven gases and from steam that is purchased from a power plant located at the Ramallo facility owned by Siderca S.A.I.C., a subsidiary of Tenaris. The rest of the requirements are covered through the purchase of natural gas from Repsol YPF and Tecpetrol S.A, or with alternative sources of energy such as fuel oil.

OPEL (“Operadora Eléctrica”), a subsidiary of Tenaris, currently manages Siderar’s thermoelectric plant and the plant owned by Siderca. Siderar pays an administration fee for its services. This outsourcing contract is due to terminate in 2015.

Siderar covers electricity shortfalls or sells excesses, as the case may be, at spot prices in the wholesale market. In order to mitigate these shortfalls, Siderar entered into an electricity supply contract with Genelba Power Plant, which is owned by Petrobras, and that covers the Ramallo facilities shortfalls. In addition, Siderar has also entered into a supply contract with Central Puerto Plant, which covers the Ensenada, Florencio Varela and Canning facilities shortfalls.

Natural gas. Siderar also consumes substantial volumes of natural gas in Argentina, particularly to operate its blast furnace and power generation facilities. The average daily consumption of its facilities is approximately 1,700 thousand cubic meters of natural gas.

The relative cost of natural gas in Argentina decreased substantially in 2002 following the Argentine peso devaluation and subsequent freezing of tariffs in local currency terms. However, since 2003, this cost gradually increased due to governmental and private tariff negotiations and the appreciation of the Argentine peso against the U.S. dollar. Currently, the cost of gas and transportation is over 2001 levels, while the cost of distribution is still below the level of 2001. During the last four years, the continuing increase in natural gas demand in Argentina together with a substantial lack of investment in natural gas production and transportation have resulted in shortages of natural gas to industries and private consumers. See Item 3. “Key Information—D. Risk Factors—Risks Relating to the Countries in Which We Operate—Argentina—Restrictions on the supply of energy to Ternium’s operations in Argentina could curtail Ternium’s production and negatively impact Ternium’s results of operations.”

Siderar has long-term supply arrangements with Repsol YPF and Tecpetrol S.A, a company controlled by San Faustin, for the purchase of natural gas. Repsol YPF is Siderar’s main supplier. Tecpetrol supplies it with a significant portion of its natural gas requirements on terms and conditions that are equivalent to those governing the supply of natural gas by Repsol YPF. Siderar’s supply agreement with Repsol YPF extends until December 2006 with prices revised on an annual basis. A new agreement is currently under negotiation, meanwhile YPF is delivering gas under spot basis. In March 2003, Siderar entered into an agreement with Tecpetrol under which Siderar paid USD17.3 million for the advance purchase of a total of 725 million cubic meters (up to 400 thousand daily cubic meters) of natural gas to be delivered over a period of 5 years on pricing terms that will enable it to share through discounts the impact of any increase in natural gas prices over that period with Tecpetrol. Under the terms of the agreement, Siderar will have a minimum guaranteed return on this advance payment equal to LIBOR plus 3.5%. In November 2006, the gas purchased to Tecpetrol covered the total amount paid in March 2003. Since then, no discount has been applied to gas price. Furthermore, in May 2007, Tecpetrol decided to cancel the contract pursuant to the termination clause that allows any party to terminate the contract after the USD17.3 million was paid. Up to date, Tecpetrol is delivering gas under spot basis. A new long-term supply contract is expected to be signed after the negotiations between the Argentinve government and gas producers conclude. Siderar purchases from Tecpetrol in 2006 and 2005 amounted to USD8.9 million and USD7.4 million, respectively. Siderar covers any variation in its requirements for natural gas in the spot market.

Siderar also has separate transportation agreements with Transportadora de Gas del Norte S.A. (TGN), Transportadora de Gas del Sur S.A. (TGS), Camuzzi Gas Pampeana S.A. (Camuzzi), Gas Natural Ban S.A. (Gasban) and Metrogas. The main transportation contract is with TGN, which expires in April 2013. For the final distribution phase, Siderar has several distribution contracts with Litoral Gas (a company partially owned by Tecgas, an affiliate of San Faustin), Camuzzi, Gasban and Metrogas. The principal contract is with Litoral Gas, which after the renegotiation of the contract renewal, will expire in December 2008.

 

46


Table of Contents

Other raw materials. Ternium has an on site oxygen, nitrogen and argon separation plants in order to extract these gases for use in the steelmaking process. In December 1993, Ternium’s subsidiary Siderar entered into a contract with Air Liquide Argentina S.A. for the operation and maintenance of an oxygen separation facility at Ramallo that supplies oxygen, nitrogen and argon. This contract initially had a term of 15 years and was renewable by mutual agreement. It was amended in 2000 and 2002, and its term has been extended until 2021. Under the terms of the contract, Siderar is required to take or pay certain minimum daily amounts of oxygen, nitrogen and argon, which amounts are consistent with Siderar’s production requirements in Argentina. Since 1993, Air Liquide had invested in new equipment in order to increase the plant capacity.

Venezuela

The principal raw materials and energy inputs used in Ternium’s steelmaking activities in Venezuela are iron ore, scrap steel and natural gas. Other inputs used include electricity, oxygen and various other gases.

Venezuela is rich in reserves of raw materials used by Ternium. We believe that Venezuela’s abundance of raw materials, the relatively low cost of these materials and the proximity of Sidor’s facilities to such raw materials provide it with a significant advantage over other international steel producers.

Sidor currently purchases its iron ore, electricity and natural gas through long term arrangements with entities owned by the Venezuelan government which as of May 31, 2007, through CVG, owned 20.3% of the outstanding capital stock of Sidor. Sidor expects to continue to enter into long-term contracts to meet its raw material needs. See Item 3. “Key Information—D. Risk Factors—Risks Relating to the Steel Industry—Price fluctuations or shortages in the supply of raw materials and energy could adversely affect Ternium’s profits.”

Iron ore. On November 12, 1997, Sidor entered into a contract with FMO for the supply of iron ore. Sidor receives an average of 20,000 tons a day of iron ore at its facilities. The mines where the iron ore is extracted are San Isidro, Los Barrancos, Las Pailas and Altamira. Pursuant to this contract, FMO will supply Sidor with 100% of its annual iron ore requirements until 2017. After 2017, the contract is renewable for additional twenty-year periods unless Sidor or FMO object to its renewal at least 90 days prior to its expiration. Under the 1997 contract, prices were fixed on an annual basis according to a formula that resulted in the application of the lower of historical cost adjusted for U.S. inflation and certain market reference prices. The 1997 contract also included a hardship provision, in which each of Sidor and FMO agreed to use its best efforts to resolve inequities arising during the contract’s term. Following a public announcement by the Venezuelan government that sought to pressure Sidor to renegotiate the terms of the 1997 contract, as permitted under the contract’s hardship provision, Sidor and FMO entered into an amendment of the 1997 contract on November 11, 2005. The revised contract sets the iron ore price at the lower of:

 

   

the price charged by FMO to its customers (other than certain newly-created state-owned steel producers) in the Venezuelan domestic market; and

 

   

80% of a market reference price (which percentage may drop to 70%, as described below).

According to the new terms, the price of iron ore would follow the price of Carajas Fines. Due to the amended pricing formula, the cost of iron ore for fiscal years 2006 and 2007 increased by approximately 63% and 9.5%, respectively. Under the revised contract, the pricing formula may be adjusted every two years, on the basis of public policy, Sidor’s competitiveness and the evolution of international steel prices. In conjunction with the changes in price conditions for the supply of iron ore to Sidor by FMO, the Venezuelan government is offering a price reduction on raw materials acquired from state-owned enterprises, such as FMO, that may reach 10% over the agreed market reference price. These preferential supply terms, as established in the applicable Venezuelan regulations, are conditioned on commitments by potential beneficiaries to assist development of the domestic industrial sector and to support certain community needs. In June 2006, Sidor was notified that it had been granted a 7.61% discount on its iron ore price in connection with the initial assessment of Sidor’s proposed industrial development plan. The other terms and conditions of the 1997 contract remain in effect under the revised contract.

Pellets. In connection with the iron ore contract, in 1997 Sidor and FMO entered into another agreement under which Sidor committed to sell, upon the request of FMO, up to 2.0 million tpy of pellets to FMO, at a price based on the sale price at

 

47


Table of Contents

which FMO sells iron ore to Sidor plus a bonus paid to Sidor for the production of pellets, which is determined using market references.

Briquettes. In 2004, to guarantee its supply of raw materials, Sidor, together with Tenaris, organized Matesi, in which they had interests of 49.8% and 50.2%, respectively. In July 2004, Matesi purchased the assets of Posven for USD120 million. Posven owned an idled iron-briquette producing facility located in Ciudad Guayana, Venezuela, with an annual capacity of 1.5 million tons. Matesi began production in October 2004 and is expected to ensure that Sidor can rely on an additional source of high-quality, low-cost iron ore briquettes, enabling crude steel production to exceed 4.5 million tpy.

Scrap. Sidor’s consumption of scrap is approximately 580,000 tpy. In 2006, approximately 61% of the scrap used was obtained internally from products with technological or qualitative defects.

Electricity. Sidor’s production process requires a large amount of electricity. On August 21, 1997, Ternium entered into a twenty-year contract with EDELCA, a Venezuelan state-owned company, for the supply of all of Sidor’s electricity needs. This contract will terminate in 2018. Pursuant to the terms of the contract, Sidor is committed to pay, subject to a most favored nations provision linked to the prevailing prices for other established steel and iron producers in the region, an annual purchase price starting at USD17.14 per MWh, subject to annual adjustments beginning in 2000 of up to 3% and increasing to a fixed price of USD20.06 per MWh for the years 2005 through 2009. The price to be paid after 2009 will be negotiated by Sidor and EDELCA in 2007. In addition, the terms of the contract impose a minimum annual fee equal to 75% of the average estimated fees for the year. The electricity is supplied from one electrical station in Macagua and three electrical stations in Guayana B located south of Sidor’s facilities. The energy is transmitted through four lines primarily from the “Guri” hydroelectric plant, with a capacity of 10,000 megawatts. The inner lines are distributed in seven sub-stations. Two of these sub-stations distribute energy to the electric furnaces and the rest cover the needs of the facility.

Natural gas. Sidor’s DRI production process is heavily reliant upon supplies of natural gas. Sidor buys 100% of its natural gas from PDVSA Gas, a Venezuelan state-owned natural gas supply company. In 1997, Sidor signed a twenty-year contract with PDVSA Gas for the supply, on a take or pay basis, of 230 million cubic meters per month of natural gas (the equivalent of 8.33 million cubic meters per day) of natural gas, and must pay for a minimum quantity of 83.3 million cubic meters of natural gas per month. Sidor and PDVSA Gas may, from time to time, revise the maximum amounts to accommodate Sidor’s actual natural gas requirements and any plans for expansion. Under the terms of this contract, Sidor is required to purchase the gas at a formula price that is capped at the levels paid by other established steel and iron producers in the region. The contract expires in 2017, and is renewable thereafter in five year increments.

Lime. Sidor obtains the majority of its lime from its lime plant. The actual capacity of this plant is 500,000 tpy. The production of lime is subordinated principally to Sidor’s demands and to clients’ demands.

Mexico

In Mexico, Ternium’s process for producing steel relies on electric arc furnaces, which melt a combination of steel scrap and DRI to produce liquid steel, which is then further processed to make its steel products. Ternium’s production process requires extensive use of natural gas and electricity, and energy costs are one of the largest components of production costs.

Iron ore. As described under “—Production Process and Facilities—Mexico” above, Ternium’s subsidiary Hylsamex owns interests in two mining companies in Mexico: 100% of the equity of the Las Encinas mines, and a 50% controlling equity stake in Peña Colorada, which operates Mexico’s largest iron ore mine. In 2006, Ternium’s Mexican facilities sourced 100% of their iron ore requirements from its own mines. Under its arrangement with Peña Colorada, Hylsamex is committed to purchase 50% of the annual production of the mine, which represents approximately 54% of its overall requirements. From the combined iron ore output, approximately 80% went to Hylsamex’s own direct reduction plants, while the remaining 20% was sold in the international market. Most of the iron ore exports were made pursuant to an agreement to supply 2.9 million metric tons of pellets to China over a five-year period until March 2009.

DRI. Hylsamex’s vertical integration strategy in Mexico is centered on synergies created by mining its own iron ore and refining it to produce DRI with its proprietary HYL® direct reduction process. We believe that over the long-term, DRI is the preferable metallic input for the production of steel because under ordinary circumstances it is a less expensive, but better quality, input than steel scrap. Nonetheless, Ternium seeks to maintain flexibility in the mix of steel scrap and DRI that it

 

48


Table of Contents

uses in its electric arc furnaces in Mexico, in order to better respond to fluctuations in raw materials prices. Ternium has the ability to substitute alternative metallics for DRI in periods where economic conditions make DRI more expensive to produce.

Scrap. In keeping with its vertical integration strategy, Hylsamex sources 100% of its steel scrap through its own steel scrap collecting and processing companies. These include subsidiaries Transamerica E. & I., Corp. and Ferropak Comercial, S.A. de C.V. In 2006, most of the scrap used was purchased domestically, with approximately 20% coming from the United States.

Electricity. The electric arc furnaces consume large quantities of electricity. During 2006, 59% of Hylsamex’s total consumption was supplied by the Comisión Federal de Electricidad (“CFE”, Mexico’s state-owned electricity company. The remainder came from Iberdrola, a Spanish utility company with power plants around Monterrey. Hylsamex has a long-term contract for 143 megawatts of capacity.

Natural gas. Natural gas is one of the largest cost components of Ternium’s Mexican production processes. Natural gas is used as a reducing agent for the production of DRI and for the reheating of slabs and billets before the hot rolling process. In Mexico, Hylsamex purchases all of its natural gas from Pemex, the Mexican state-owned oil and gas company that is Mexico’s sole producer of natural gas. These prices are set monthly based on the spot price in southern Texas, adding only the equivalent surcharge for transportation costs plus a margin that is generally less than 5%. Hylsamex currently purchases the entirety of its natural gas requirements from Pemex at market prices and often enters into derivatives contracts with the intention of reducing the effects of volatility on a portion of its natural gas requirements.

Hylsamex’s effective cost for natural gas in 2006 was MXN81.1/MMBtu, 28% higher than the MXN63.4/MMBtu registered in 2005, as a result of hedging most of its requirements for the year. In contrast, Hylsamex’s reference price for natural gas—the South Texas index—decreased 8% on average (MXN68.2/MMBtu in 2006 compared to MXN74.1/MMBtu in 2005). Hylsamex’s effective cost for natural gas increased less than the market price as a result of Hylsamex’s hedging strategies. Hylsamex is constantly monitoring and studying the natural gas markets to manage this exposure.

The reference prices shown above benefited from a decree issued by the Mexican government on September 12, 2005 that temporarily modified the mechanism that sets the price of natural gas in the Mexican market. This mechanism consisted of a fixed price of MXN83.2/MMBtu for September 2005 and a fixed price of MXN78.02/MMBtu plus 21% of the difference between the south Texas price reference and MXN78.02/MMBtu for the following months, with a minimum price of MXN78.02/MMBtu. This decree was the response of the Mexican government to the spike in natural gas prices in the United States resulting from Hurricane Katrina, which affected Mexican natural gas market prices as well. The price fixing mechanism remained in place until January 2006, when the daily natural gas production in the Gulf of Mexico reached a level of 8.0 Bcfs for at least thirty days, which was the condition established by the Mexican government to end the decree.

Product Quality Standards

Ternium develops its products and services with a philosophy of continuous improvement and seeks to excel in its internal quality oversight its products and processes. Ternium’s products are manufactured in accordance with the specifications of the International Organization for Standardization’s specifications, or ISO, and they also must satisfy proprietary standards and customer requirements.

Ternium has designed, developed and implemented the Ternium Quality Management System based on the platform ISO 9001:2000 and ISO/TS 16949:2002 applied to those areas related to automotive supplies (Siderar/Florencio Varela and Hylsa/Coated—shaped), which will be audited by the accredited organism Lloyd’s Register Quality Assurance (“LRQA”) in order to obtain the ISO multisite certification for Ternium. This Ternium Quality System substitutes the individual Quality System and the individual certifications to align the Organization’s Quality criteria and to be the foundation for the Ternium Quality.

On October 2006, LRQA audited and recommended the ISO multisite certification and the ISO/TS certification of Siderar/Florencio Varela facility. During the first months of 2007, Ternium obtained the multisite certification process and LRQA implemented the Ternium Quality Management System.

 

49


Table of Contents

Furthermore, each Ternium subsidiary has obtained the accreditations required by the national and international regulations on its specific products.

Product Development and Research

Ternium’s subsidiary, Sidor, has focused on the development of hot rolled steels for welded tubes used in the oil and gas industries. Sidor has supplied high strength API X65 (“American Petroleum Institute”) grade in heavy gauges to Venezuelan pipeline projects. Also, hot rolled coils for API X42 HIC corrosion resistant tubes and microalloyed ingots for seamless pipe were successfully applied by domestic market customers. For the industrial sector, Sidor, has introduced a hot rolled copper alloy weathering steel for hopper rail cars. Furthermore, high carbon wire rods manufactured according to the Society of Automotive Engineers (“SAE”) standards have been incorporated in the long products portfolio, covering wide spread uses such as wire mesh, barbed wire and coil spring for mattresses.

Ternium’s subsidiary Siderar has focused in the automobile industry, introducing hot and cold rolled and electrogalvanized steels manufactured according to Ford, Toyota and Peugeot standards. In the home appliance sector, prepainted hot dip galvanized were introduced. Moreover, in order to attend modernization of customer’s manufacturing technologies, prepainted materials to be supplied in coils are currently under development.

Ternium’s subsidiary Hylsamex has designed medium carbon, low silicon, hot rolled steels for galvanized pipes production. For the automotive industry, hot rolled steels for chassis and crosspieces, hot rolled medium carbon according to Toyota standards and boron alloyed steels for bumpers supporting pieces, were developed. Furthermore, extra deep drawing and high resistance hot dip galvanized grades, were introduced, together with wire rod steels for suspension springs. Dual phase hot rolled steels are among the main new initiatives.

Research efforts were oriented to continue the extension of a thermo-metallurgical model of Siderar’s hot rolling mill. Moreover, a model that reproduces cold rolling and annealing stages has been extended to allow prediction of mechanical properties of microalloyed steel products.

Regarding coil coated products, accelerated tests continue to be developed to predict service performance.

In the environmentally friendly products, research continues on Chrome VI in order to develop free surface treatment technologies for zinc coated products, and Chrome free tinplate passivation.

The Company continues its association with international consortiums for applied research, aiming to generate knowledge that sets the basis for new product development and improvement. Ternium at present participates at Steel Research Center-McMaster Univertisty, for wire rod, hot rolled and hot dip galvanized steel products, International Lead Zinc Research Organization (ILZRO), for hot dip galvanized and electrogalvanized steels, French Corrosion Institute, for hot dip galvanized and coil coated materials, Interzac, for 55% Aluminum-Zinc coated steels and Tin International for tin plate.

Research and Development

As of December 31, 2006, Sidor applied to the Service of Intellectual Property of Venezuela (SAPI), for a total of 44 patents related to improvements in its equipment, processes and products. Sidor oversees and coordinates the different stages of the patent process, from the origin of the innovating idea and its evaluation and approval to the introduction of the patent application request.

Sidor strives to develop products that will allow its clients to fulfill their continuous changing requirements, such as the products made for PDVSA Gas. PDVSA Gas required special products for the construction of a 300 kilometer gas pipeline network. For this project, Sidor developed a stronger steel product that allows PDVSA Gas to construct a pipe with the thickness necessary to resist the high gas operating pressure.

Hylsamex has developed several types of products and services, with more than 100 registered brands. As an example, Hylsamex developed a proprietary technology, called HYL®, for the reduction of iron ore, which is protected by patents in Mexico, the United States of America and several other countries. In late 2005, Hylsamex transferred to Techint Compagnia

 

50


Table of Contents

Tecnica Internazionale S.p.A., a Techint Group company, (“Techint Technologies”) the rights to market and license the HYL technology to unaffiliated third parties for royalty fees.

We spent USD1.8 million for R&D in 2006, compared to USD2.1 million in 2005.

Regulation

Environmental Regulation

Ternium is subject to a wide range of local, provincial and national laws, regulations, permits and decrees in the countries where it has manufacturing operations concerning, among other things, human health, discharges in the air and water and the handling and disposal of solid and hazardous wastes. Compliance with these environmental laws and regulations is a significant factor in Ternium’s business.

Ternium’s environmental system is supported by a network of people with responsibilities in different areas of the Ternium companies (especially engineering, operations and maintenance sectors), as well as on the corporate level. This network is responsible for environmental permit administration, technical studies and evaluation of environmental aspects for projects, contractors, products, services, processes and raw materials, among others. The environmental area also works closely with Ternium’s health and safety, planning, human relations and communications departments (both internal and external).

Ternium has not been fined for any material environmental violations in 2006, and we are not aware of any current material legal or administrative proceedings pending against it with respect to environmental matters which could have an adverse material impact on Ternium’s financial condition or results of operations.

Hylsamex’s activities in Mexico are subject to Mexican federal and state laws and regulations relating to the protection of the environment. The fundamental environmental law in the Mexican federal system is the Mexican General Law of Ecological Balance and Environmental Protection (the “Ecological Law”). The Ministry of Environment and Natural Resources (Secretaría del Medio Ambiente y Recursos Naturales or “SEMARNAT”) oversees compliance with the federal environmental laws and has the authority to enforce federal environmental laws, concerning water, land, air and noise pollution and hazardous substances.

Under the Ecological Law, a company may request an inspection of its facilities and voluntarily enter into an agreement with the Federal Environment Protection Office (Procuraduría Federal de Protección al Ambiente or “PROFEPA”) through the “Programa Nacional de Auditoría Ambiental Voluntaria” or Voluntary Environmental Audit National Program pursuant to which the company would agree to bring its facilities into compliance with law.

Hylsamex achieved the recertification condition for “Clean Industry Certificate” for its Monterrey plant. The Puebla Plant is currently certified as a “clean industry”, and the Galvak Plant, now identified as Hylsa Recubiertos, also reached the “Clean Industry Certificate” condition. Las Encinas mines and its facilities were voluntarily audited in September 2004. As a result, an improvement action plan was completed in June 2007 which is been implemented with capital expenditures of USD1.4 million in order to attain the “clean industry” condition. Regarding the North Plant, its improvement action plan was defined in December 2006. We believe that Hylsamex is currently in compliance with its obligations under such plans, and we are not aware of any current material legal or administrative proceedings pending against it with respect to environmental matters which could have an adverse material impact on our financial condition or results of operations.

Mining regulations in Mexico

Because its operations in Mexico include mining, Hylsamex is also subject to Mexican regulations relating to mining and mining concessions. Under Mexican law, mineral resources belong to the Mexican nation and a concession from the Mexican federal government is required to explore for or exploit mineral reserves. Pursuant to the Ley Minera (“Mining Law”), mining concessions may only be granted to Mexican individuals and to legal entities incorporated under Mexican law. Foreign investors may hold up to 100% of the shares representing the capital stock of such entities. Ternium’s mineral rights derive from concessions originally granted to Hylsamex.

 

51


Table of Contents

Mining concessions are either granted for exploration or for exploitation. An exploration concession permits its holder to explore for any mineral resources on a specified claim for a six-year period, which is nonrenewable and confers priority with respect to seeking an exploitation concession for the same claim. An exploitation concession permits its holder to extract minerals from a specified claim for a renewable period of up to 50 years, provided that its holder pays a nominal fee and complies with the Mining Law.

Mining concessions grant several specified rights to the concessionaire, including:

 

   

the right to dispose freely of mineral products obtained as a result of the exploitation of the concession;

 

   

the right to obtain the expropriation of, or an easement with respect to, the land where the exploration or exploitation will be conducted; and

 

   

the use of water in the mine to facilitate extraction.

In addition, a concessionaire of a mining concession is obligated, among other things, to explore or exploit the relevant concession, to pay for any relevant mining rights, to comply with all environmental and safety standards, and to provide information to the Secretaría de Economía (“Secretary of Economy” or “SE”) and permit inspections by SE. Mining concessions may be terminated if the obligations of the concessionaire are not satisfied.

A company that holds a concession must be registered with the Public Mining Registry. In addition, mining concessions and permits, assignments, transfers and encumbrances must be recorded with the Public Mining Registry to be enforceable. We believe that its material mining concessions are duly recorded with the Public Mining Registry.

Trade regulations

Intense global competition in the flat steel products industry can lead many countries to impose higher duties or other restrictions on steel product imports to protect their domestic industries from trades that are not made under market conditions or that are otherwise unfair. Such measures protect domestic producers from increased imports sold at dumped or subsided prices.

Some of the main regions to which Ternium sells its products, such as the United States and Europe, implemented these measures as well as general ones (safeguards) during a period of intense competition in 2001. All these safeguards were lifted in December 2003, but the same did not happen with antidumping and countervailing duties. At the same time, bilateral or regional free trade agreements have liberalized trade among some countries, providing for reduced or zero tariffs for many goods, including flat steel products.

Countries’ imposition of trade remedy measures and the entry into force of various free trade agreements can and have both benefited and adversely affected Ternium’s home market and export sales of flat steel products, as described below. See also Item 3. “Key Information—D. Risk Factors—Certain Regulatory Risks and Litigation Risks—International trade actions or regulations and trade-related legal proceedings could adversely affect Ternium’s sales, revenues and overall business.”

 

   

Argentina: The Argentine government has imposed various antidumping measures on certain steel imports that compete directly with Ternium’s sales in Argentina. Although, Ternium’s operations have not been materially affected by the anti-dumping duties imposed by the Argentine government, the following measures are currently in effect:

Hot rolled products. Since December 1999, the Argentine government has imposed anti-dumping measures requiring a minimum import price of USD410/ton for hot rolled steel imports from Brazil and of USD360/ton for hot rolled steel imports from the Russian Federation and Ukraine. Argentina accepted a price undertaking agreement from Brazilian exporters. Argentine authorities conducted a sunset review of these measures and decided to continue them for five more years. In its decision, the Argentine government determined anti-dumping duties for Russian, Ukrainian and Brazilian hot rolled steel exports to Argentina. A price undertaking for Brazilian exports was also accepted by the Argentine authorities.

Argentina has also imposed antidumping measures on hot rolled steel imports from Kazakhstan (39.91%), Romania (40.48%), Slovak Republic (62.09%) and South Africa (55.26%) since April 2002. In May 2007, Argentine authorities initiated a sunset review for these measures, the review is expected to conclude in May 2008.

Cold rolled products. Since March 2001, the Argentine government has imposed anti-dumping measures requiring a minimum freight on board (“FOB”) price of USD534/ton for cold rolled steel imports from Brazil and USD521/ton for cold rolled steel imports from the Russian Federation. The Argentine government accepted a price undertaking from Brazilian exporters in accordance with an agreement with the main exporters. In June 2005, petitioners requested a sunset review but on June 13, 2006, petitioners withdrew their petition and the measures are no longer in effect.

Since January 2003, Argentina has also imposed antidumping measures on cold rolled steel imports from Korea (60.46%), South Africa (83.07%), Kazakhstan (80.61%) and Ukraine (71.22%). The measures are eligible for sunset review in 2008.

Galvanized products. Since May 2003, Argentina has imposed antidumping duties on galvanized steel sheets from South Korea (49.67%), South Africa (27.90%), Australia (70.37%) and Taiwan (33.09%). The Argentine government will conduct sunset review, if petitioner requests it, of these measures in 2008 to determine whether they should continue.

Argentina has signed free trade agreements with several countries or trade blocs aimed at liberalizing trade between them:

In early 1991, the Argentine government reduced import tariffs and eliminated most non-tariff restrictions on trade as part of an effort to open the Argentine economy to foreign competition. In March 1991, Argentina, Brazil, Uruguay and Paraguay established Mercosur, a common market organization whose four members have signed agreements that aim for eventual economic integration and the creation of a free trade zone and common external tariffs. Mercosur has eliminated or significantly reduced over time import duties, tariffs and other barriers to trade among the member nations. Zero tariffs have applied among Mercosur members to steel products since January 1, 2000. The current tariff applicable to flat and long steel products imported from outside Mercosur ranges from 2% to 14%, while the tariff for tubular steel products imported from outside Mercosur generally ranges from 14% to 16%.

In addition, Mercosur has a trade agreement with Chile, pursuant to which all tariffs on steel products have been eliminated. In 1996, Mercosur signed a free trade agreement with Bolivia, pursuant to which all steel products began receiving a 100% tariff preference on January 1, 2006.

In 2005, Mercosur and the Andean Community (Bolivia, Colombia, Ecuador, Peru and Venezuela), signed a free trade agreement aimed at reducing and eventually eliminating tariffs on steel products traded among member countries over a period of 8 to 12 years. Mercosur is also negotiating free-trade agreements with the EU, Mexico, India and South Africa, as well as participating in the Free Trade Area of the Americas, or FTAA, negotiations encompassing virtually all countries in the Americas. However, Venezuela has also announced that it will not be part of the FTAA being promoted by the United States.

In May 2006, Venezuela became a junior member of Mercosur and is currently seeking full membership in the group.

 

   

Mexico: The Mexican government has imposed certain anti-dumping measures on steel import products that are similar to the ones produced by Ternium in Mexico. The following anti-dumping measures are currently in effect.

Hot rolled products. On March 28, 2000, the Mexican government imposed anti-dumping duties on the Russian Federation and Ukraine of 30.31% and 46.66%, respectively. On March 25, 2005 the first sunset review was initiated by the Mexican authorities. On March 17, 2006, the final resolution was issued which extended the anti-dumping duties for an additional five-year period.

Furthermore, since September 2005, Mexico has imposed anti-dumping measures against Ukraine (60.1%), Romania (67.60%) and Russia (36.80%) on cut-to length plate. Mexican authorities are expected to conduct a sunset review of the anti-dumping order in 2010.

Cold rolled products. Since June 1999, Mexico has imposed anti-dumping measures on cold rolled steel sheet from Bulgaria (44.0%-45.0%), the Russian Federation (85.0%-88%) and Kazakhstan (33.0%-34.0%). On December 12, 2005, and as a result of the first sunset review, the Mexican authorities extended the anti-dumping duties for an additional five-year period until June 2009.

Plate in coil. Since June 1996, an anti-dumping duty of 29.3% on imports from Russia has been imposed. In June 2003, the first sunset review resolution concluded the application of the anti-dumping duty. In June 2007, the Ministry of Economy issued the final resolution of the second sunset review, determining the continuation of the anti-dumping duties for an additional five year period.

Long and pipe products. Brazilian imports of reinforcing bars are currently subject to an anti-dumping duty of 57.69%. In June 2006, the first sunset review resolution determined the continuation of anti-dumping duties for an additional five year period. Wire rod imports from Ukraine are subject to a duty of 30.52%, which was imposed in September 2000. In August 2005, domestic producers announced their interest in a second sunset review to the government. Furthermore, a duty of 25.87% is in place over standard pipes imported from Guatemala since 2003. The initiation of the first sunset review is expected in January 2008.

Mexico has signed trade agreements with several countries or trade blocs aimed at liberalizing trade between them:

NAFTA was signed among Canada, Mexico and the United States and came into effect on January 1, 1994. NAFTA provided for the progressive elimination over a ten-year period of duties on, among other things, steel products traded between or among Mexico, the United States and Canada. As a result, zero tariffs currently apply to steel products traded within NAFTA countries. Ternium therefore has greater access to U.S. and Canadian markets but also faces increased competition in Mexico from U.S. and Canadian steel imports. NAFTA provides that NAFTA member companies (for example, Mexican steel producers) can challenge trade restrictions imposed by other NAFTA countries before a bi-national dispute resolution panel.

The Mexican-European Free Trade Agreement, or MEFTA, became effective on July 1, 2000. MEFTA provides for the phase-out and eventual elimination of Mexican duties on all industrial goods, including finished steel products, from the European Union by January 1, 2007. The EU eliminated all import duties on Mexican industrial goods, including finished steel products, as of January 1, 2003. Accordingly, Ternium has increased access to EU markets under MEFTA, but also could face increased competition in Mexico from EU steel imports.

In addition, the Mexican government has signed trade agreements with Venezuela, Colombia, EFTA (Liechtenstein, Norway, Iceland and Switzerland), Japan, Chile, Bolivia, Nicaragua, Costa Rica and Uruguay, among others. However, the Mexico-Venezuela FTA was cancelled in November 2006.

 

   

Peru: Since May 2002, the Peruvian government has imposed a 10% surcharge over CIF (cost, insurance, freight) prices on imports of steel bars from Venezuela, including Ternium’s exports from Venezuela to Peru. Peru imposed the measure as a result of Venezuela’s refusal to allow garlic imports from Peru, as agreed under the Andean Community regulations. Since December 2004, Peru has imposed a 5% surcharge over CIF prices on cold rolled coil imports and some coated products from Venezuela, including Ternium’s exports to Peru, because of Venezuela’s failure to apply agreed-upon import tariffs to Andean Community partners’ goods.

 

   

United States: U.S. authorities have imposed some measures on flat and long steel products from Argentina, Mexico and Venezuela, which restrict Ternium’s exports to that country. Measures that currently are in effect are the following:

Argentina. In August 2001, U.S. Department of Commerce, or DOC, imposed an anti-dumping duty of 44.59% and a CVD duty of 41.69% on hot rolled steel from Argentina following an affirmative injury finding by the U.S. International Trade Commission, or ITC. DOC and ITC initiated a sunset review of these measures in August 2006. A final finding by both of these agencies will result either in the termination or continuance of the duty. Also, cold rolled exports from Argentina to the United States were the subject of anti-dumping and countervailing duty investigations in 2002. These procedures were eventually resolved in favor of Siderar due to a finding of no injury. This decision is now final.

Mexico. Hylsamex’s standard pipes are subject to an anti-dumping duty of 10.38%. This measure has been in place since 1992 and is currently under review as part of a sunset review procedure. Hylsamex’s Oil Country Tubular Goods, or OCTG, products were subject to a 1.48% anti-dumping duty, but on May 31, 2007, ITC revoked the duties against Mexican OCTG. Pipe products were subject to anti-dumping duties since August 1995. This case is under review in two separate proceedings: a NAFTA panel and a World Trade Organization panel. Wire rod products are also currently subject to a duty of 1.81% as a result of the first administrative review.

Venezuela. In October 2001, the International Trade Commission (“ITC”) determined that wire rod imports from Venezuela were not materially injuring the U.S. steel industry. The ITC decision was appealed to the Court of International Trade (“CIT”). Upon remand from the CIT, the ITC issued a remand determination, finding again that imports from Venezuela were negligible. The case is now pending, awaiting a decision from the CIT approving the ITC remand determination.

 

   

Venezuela: The Venezuelan government has imposed various antidumping measures on steel imports that compete directly with Ternium’s sales in Venezuela. Although Ternium’s operations have not been materially affected by the anti-dumping duties imposed by the Venezuelan government, the following measures are currently in effect:

Hot rolled products. Since June 1999, Venezuela has imposed anti-dumping duties of 45.03%, 62.92% and 57.65% on hot rolled steel imported from the Russian Federation, Ukraine and Kazakhstan, respectively. These measures were continued in September 2005, following completion of a five-year review and will be in force until terminated by Venezuela’s Anti-Dumping and Subsidies Commission (“CASS”) in accordance with Venezuelan trade law.

Cold rolled products. Since September 1999, Venezuela has imposed anti-dumping duties of 45.41%, 55.01% and 58.47% on cold rolled steel imported from the Russian Federation, Ukraine and Kazakhstan, respectively. These measures were continued in October 2005, following completion of a five-year review, and will be in force until terminated by CASS in accordance with Venezuelan trade law.

Venezuela has signed trade agreements with several countries or trade blocs aimed at liberalizing the trade between them:

The Andean Community (formerly the Andean Pact) is a trading bloc established in 1969 by Bolivia, Colombia, Ecuador, Peru and Venezuela for the purpose of promoting trade relations among its members and between the Andean Community and the rest of the world (not only the European Community, now the EU). In 2004, Mercosur and the Andean Community merged the two blocs into a South American Free Trade Area. However, as a result of political tensions with member countries, Venezuela left the Andean Community. Venezuela also withdrew its membership from G-3 Trade Agreement, under which it had a free trade with Mexico and Colombia.

 

52


Table of Contents

Insurance

Our subsidiaries carry insurance policies covering property damage (including machinery breakdown and business interruption), general liability and other insurance such as, among others, automobile, marine cargo, life and workers’ compensation insurance. These insurance policies include coverage and contract amounts which are customary in the steel products industry and in line with legal and domestic market requirements. General liability coverage typically includes third party, employers, sudden and accidental seepage and pollution and product liabilities within limits up to USD100 million.

C. Organizational Structure

The Company holds the San Faustin’s investments in flat and long steel manufacturing, processing and distribution businesses, including its controlling direct and indirect equity interests in Argentina’s largest steel company, Siderar, Venezuela’s largest steel company, Sidor and one of Mexico’s largest steel companies, Hylsamex, its controlling direct equity interests in Ternium Internacional and its recently acquired 50% equity interest in Exiros, a purchase agent.

Below is a simplified diagram of Ternium’s corporate structure as of May 31, 2007.

LOGO

 

53


Table of Contents

Subsidiaries

Ternium operates entirely through subsidiaries. For a complete list of its subsidiaries and a description of its investments in other companies, see notes 1 and 2 to our consolidated financial statements included in this annual report.

Siderar

Siderar was created in 1993 and has become the main integrated manufacturer of flat steel products in Argentina with a current total annual production capacity of 2.9 million tons of crude steel.

Siderar operates one integrated steel manufacturing plant with 100% continuous casting capability, one hot strip rolling mill, two cold strip rolling mills, one tin plating plant, two galvanizing plants, one continuous painting plant, one electrolytic galvanizing plant for coils, a pre-painting plant for sheets and four service centers, all located in the province of Buenos Aires, Argentina.

Siderar’s origins began in September 1961 with the founding of Propulsora Siderúrgica, or Propulsora. Propulsora began its operations as a producer of cold rolled coils in December 1969 and in the early 1990s began to evolve through a series of strategic investments oriented to transform Propulsora into an integrated steel producer. Propulsora acquired Aceros Parana, which was formed by the Argentine government in connection with the privatization of Somisa, at that time the main integrated producer of flat steel in Argentina. As part of this privatization, all of Somisa’s productive assets were transferred to Aceros Parana, of which Propulsora acquired a controlling interest in late 1992. On November 29, 1993, Propulsora merged its operations with those of Aceros Parana and its subsidiary company, Sidercrom, a tin plate processing company, and two other steel industry subsidiaries of Propulsora (Aceros Revestidos and Bernal). After the merger, Propulsora changed its name to Siderar S.A.I.C.

As part of the privatization process in 1992, 20% of Siderar’s shares were sold to former employees of state-owned Somisa under the Programa de Propiedad Participada (the “Employee Stock Ownership Plan”). These shares are administered by Inversora Siderúrgica Argentina. At the Siderar shareholders’ meeting held on April 30, 2002, it was decided to convert the employee-held Class B shares to Class A shares that are authorized to be listed and to trade on stock exchanges.

The Company acquired a 56.1% participation in Siderar through the multiple-step reorganization of San Faustin’s holdings in 2005. On October 27, 2005, Usiminas exchanged its 5.3% equity stake in Siderar for shares of the Company. On December 28, 2006, the Company acquired a 4.85% stake in Siderar from CVRD for total purchase price of USD107.5 million.

The main shareholders of Siderar as of May 31, 2007 are set out in the following table, together with the share percentage owned by each shareholder of Siderar:

 

Siderar Shareholders

   % Shares  

Ternium

   60.9 %

Inversora Siderúrgica Argentina (employees)

   6.5 %

Public

   32.6 %
      

Total

   100.0 %
      

Siderar’s shares are listed on the Buenos Aires Stock Exchange, or BASE, under the symbol “ERAR.” The Buenos Aires Stock Market, which is affiliated with the BASE, is the largest stock market in Argentina. On June 25, 2007, the closing price of the Siderar shares on the BASE was ARP22.75 per share, (approximately USD7.34 per share).

Amazonia, Ylopa and Sidor

Amazonia. In November 1997, San Faustin, together with several leading companies related to the steel industry, including Hylsamex, Usiminas and Sivensa, formed Amazonia. Amazonia was established in the Cayman Islands. The principal activity of Amazonia is the holding of long term investments in Sidor. The corporate purpose of Amazonia also

 

54


Table of Contents

includes the providing of technical and management assistance. Sidor is the largest steel company in the Andean Community and the main exporting private company in Venezuela. Sidor’s Venezuelan facilities are one of the largest complexes of their kind in the world.

In December 1997, Amazonia won the bid in the privatization of 70% of the shares of Sidor. The Venezuelan government retained the remaining 30%. In January 1998, Amazonia paid USD1.2 billion for its stake in Sidor. This investment was financed through funds of each member of the consortium and a bank loan for USD500 million, guaranteed by the shares of Amazonia and those acquired from Sidor. Siderar’s share in the investment was USD123 million.

The continuing world-wide steel production crisis, the deterioration of the financial markets, the appreciation of the Bolívar and other adverse factors negatively affected Sidor and Amazonia, which had to undergo debt restructurings in 2000 and 2003.

In June 2003, a restructuring agreement was reached among Sidor, Amazonia and its financial creditors. Pursuant to the restructuring:

 

   

Ylopa bought all the financial debt of Amazonia and part of the bank debt of Sidor for a total amount of USD127.6 million;

 

   

Sidor bought part of its own bank debt for a total amount of USD37.9 million;

 

   

the remaining debt was refinanced with a longer maturity and lower interest rates;

 

   

Ylopa assigned Amazonia all the debt it bought in exchange for a convertible debt of Amazonia representing 67.4% of the equity of Amazonia;

 

   

the Venezuelan government capitalized half its debt in Sidor, increasing the government’s stake to 40.3% while Amazonia’s stake decreased to 59.7%;

 

   

the rest of the government’s debt was refinanced; and

 

   

Sidor would make payments to its creditors based on Sidor’s ability to meet certain financial goals in accordance with the payment mechanism described below.

In connection with the restructuring of Sidor’s debt, a payment mechanism was established that required Sidor to use certain future cash surpluses (calculated on the basis of a predetermined formula) to prepay the debt with BANDES and certain commercial bank creditors and to compensate CVG (the Venezuelan government) and certain partners of Amazonia (through Ylopa) pursuant to the agreements entered into by Sidor in the debt restructuring process that occurred in 2003. The payments were measured and paid semi-annually, until December 2004, when Sidor agreed to calculate the payments quarterly, and distribute the payments paid together with principal installments of its outstanding bank debt. The distribution of these payments began in 2003 and is scheduled to continue until the earlier of December 2016 and the fiscal year before the cancellation in full of the debt with BANDES. Under the agreements, Sidor’s financial creditors receive 30% of the total payments made pursuant to this mechanism, and 70% is paid to Ylopa and CVG (with 59.7% apportioned to Ylopa and 40.3% to CVG). Any distribution collected by Ylopa that exceeds USD324 million must be transferred to Amazonia. This amount was exceeded in March 2005, and any subsequent distributions were transferred to Amazonia.

In February 2005, Ylopa converted the convertible debt it held in Amazonia into equity, and assigned such equity to its shareholders pro rata to their equity interests in Ylopa.

On June 29, 2005, ISL contributed its then-current direct and indirect interests in Siderar, Amazonia, Ternium Internacional and Ylopa to the Company. Through this contribution, the Company acquired a 39.4% indirect interest in Amazonia (including a 14.4% through Siderar’s subsidiary Prosid). Furthermore, on August 22, 2005, with the acquisition of Hylsamex, Ternium acquired the 11.9% equity stake that Hylsamex held directly or indirectly, in Amazonia and the 7.5% that Hylsamex’s former controlling shareholder, Alfa, held in Amazonia. On September 9, 2005, Tenaris transferred its 21.2% equity stake in Amazonia to ISL, which on September 15, 2005 contributed such shares to the Company. On October 27,

 

55


Table of Contents

2005, Usiminas exchanged its 16.6% equity stake in Amazonia for shares of the Company. On November 17, 2005, Sidetur, a subsidiary of Sivensa, exchanged with ISL its 3.4% interest in Amazonia for 33,800,735 shares of the Company. On February 9, 2006, ISL contributed to the Company the 3.4% interest in Amazonia acquired from Sidetur in exchange for Ternium shares. As of May 31, 2007, Ternium owned directly or through wholly owned subsidiaries 85.6% of Amazonia shares and 14.4% indirectly through Siderar (Prosid).

Ylopa. Ylopa is a company established in 2002 under the laws of Portugal and registered in the Madeira Free Zone. The sole purpose of its establishment was to participate in the debt restructuring process of Sidor and Amazonia. Ylopa was formed by the contributions of some of the private partners of Amazonia.

On June 29, 2005, ISL contributed its then-current direct and indirect interests in Siderar, Amazonia, Ternium Internacional and Ylopa to the Company. Through this contribution, Ternium acquired a 34.3% interest in Ylopa. Furthermore, on August 22, 2005, together with the acquisition of Hylsamex, Ternium acquired an 11.1% indirect interest that Hylsamex’s former controlling shareholder, Alfa, held in Ylopa. On September 9, 2005, Tenaris transferred its 24.4% equity stake in Ylopa to ISL, which on September 15, 2005 contributed such shares to the Company. On October 27, 2005, Usiminas exchanged its 19.1% interest in Ylopa for shares of the Company. As of May 31, 2007, Ternium owned directly or through its wholly owned subsidiaries, 88.9% of Ylopa shares and 11.1% indirectly through Siderar (Prosid).

Sidor. Sidor is the main flat steel producer in Venezuela, the largest steel company in the Andean Community and the main exporting private company in Venezuela. The location of its steel plant close to the city of Puerto Ordaz in Venezuela, in the Matanzas industrial zone on the banks of the Orinoco River, provides Sidor with a prime location by connecting it directly to the Atlantic Ocean.

Sidor manufactures steel billets, slabs, wire rod, rebar, hot and cold rolled sheets, coated sheets and coils using direct reduction technology and electric arc furnaces with available natural resources. Sidor has an annual crude steel production capacity of 4.0 million tons.

The main shareholders of Sidor are set out in the following table, together with the share percentage owned by each shareholder of Sidor as of May 31, 2007:

 

Sidor Shareholders

   % Shares  

Amazonia

   59.7 %

CVG (Venezuelan government)

   20.3 %

Banco de Desarrollo Económico y Social de Venezuela

   0.1 %

Employees

   19.9 %
      

Total

   100.0 %
      

In accordance with the Privatization Law, CVG and BANDES were required to transfer a maximum of 20% of their shares of Sidor to present and retired workers of Sidor, under the terms of a special plan called “Program of Workers’ Participation” (Programa de Participación Laboral or “PPL”) and an additional 10% to the plan called “Program of Citizens’ Participation” (Programa de Participación Ciudadana or “PPC”). The transfer of the PPL shares began in May 2004, and, as of the date of this annual report, it has assigned 19.9% of shares identified as Class “B”. As it relates to the PPC plan there is no certainty in connection with the commencement of the plan.

Hylsamex

Our Mexican subsidiary Hylsamex, acquired in August 2005, is a holding company with operating subsidiaries that manufacture and distribute steel products in Mexico. Hylsamex and its subsidiaries operate all of Ternium’s mining and steel production activities in Mexico.

Hylsamex is one of the largest steel companies in Mexico using mini-mill technology and is a strong competitor in each of its principal flat and long steel products, including value-added finished steel products for use mainly in the construction, auto parts and appliance industries. Hylsamex is a holding company and, as such, does not engage directly in production operations. Instead, operations are conducted by Hylsamex’s operating subsidiaries. The two principal subsidiaries of

 

56


Table of Contents

Hylsamex were Hylsa S.A. de C.V. (“Hylsa”) and Galvak, S.A. de C.V. (“Galvak”), of which Hylsamex held one hundred percent of the outstanding shares. Hylsa operated the principal divisions of steel production and Galvak was a leader in the production of coated steel. In the context of a corporate restructuring aimed at simplifying operations and eliminating unnecessary overlaps, on December 31, 2005 the other subsidiaries of Hylsamex (including Galvak) were merged into Hylsa, thereby consolidating under one operating company. As of the date of this annual report, the mergers are all registered in the Public Registry of Commerce.

Hylsa, originally named Hojalata y Lámina, S.A., was formed by investors in 1943 for the purpose of producing steel required in the manufacture of crown caps for local beer-bottling operations in Monterrey, Mexico. In the early 1950s, Hylsa developed a commercial process for making DRI in response to the scarcity of steel scrap that prevailed at the time and to tap its iron ore reserves. Initially, Hylsa was dedicated to the production of flat products, continuously revamping and expanding its operations and product lines. In the 1960s and 1970s, Hylsa expanded its operations by acquiring a rebar facility in Apodaca (the North Plant) and building a greenfield mill for the production of long products close to Puebla, about 200 kilometers away from Mexico City (the Puebla Plant). In the early 1990s, Hylsa initiated a comprehensive modernization and expansion program, disbursing over one billion dollars to bring its facilities to state-of-the-art status. At the core of Hylsa’s modernization program is its Compact Strip Process (CSP) Flat Products Minimill, which commenced operations in 1995 and expanded in 1998 to its current annual capacity of hot rolled coils. Galvak resulted from the acquisition in 1979 of two local coating steel companies growing from a single galvanizing line into a leader in the processing, distribution and marketing of coated steel in Mexico, with an actual capacity of roughly 0.5 million tons of diversified coated products. In the early 1990s, Hylsamex was created by Alfa for the purpose of grouping all of Alfa’s steel-related subsidiaries. Alfa is one of Mexico’s largest companies, with significant holdings in the petrochemicals, food, telecommunications, automotive parts and steel industries. In February 2004, Alfa shareholders approved a two-stage divestiture of Hylsamex from Alfa’s portfolio of businesses.

The main shareholders of Hylsamex are set out in the following table, together with the share percentage owned by each shareholder as of May 31, 2007:

 

Hylsamex Shareholders

   % Shares  

Ternium

     99.9 %

Indirectly through I.I.I. BVI

   70.0 %  

Indirectly through Siderar and its wholly-owned subsidiary Basilea

   29.9 %  

Minority

     0.1 %
        

Total

     100.0 %
        

On December 19, 2005, Hylsamex’s shares were deregistered. As of the date of this annual report, Siderar continues to acquire shares held by the public. Mexican law does not provide for an automatic acquisition of any remaining Hylsamex shares at the expiration of the fiduciary account and does not allow us or Siderar to proceed with such an acquisition unilaterally.

Ternium Internacional Commercial Network

Ternium Internacional and its subsidiaries include eight incorporated companies (Uruguay, Spain, Holland, Panama, Peru, USA and Ecuador), three representative offices (Colombia, Argentina and Mexico) and other assets around the world that market and provide services in relation to the sales of Ternium’s products worldwide. The headquarters of the network are located in Uruguay.

Given its presence in main steel markets, Ternium Internacional is able to provide its clients with marketing assistance for their export sales by aiding in consolidating their position in their present markets and developing new markets according to a jointly defined global strategy. Ternium Internacional services include sales and trading, communication systems, offices and human resources dedicated to export trading, technical assistance, commercial back office and credit analysis.

 

57


Table of Contents

Exiros

Exiros, with presence in USA, Canada, Mexico, Italia, Brazil and Argentina, provides with purchase agency services in connection with Ternium’s purchases of raw materials and other products or services. Until October 2006, Exiros was a wholly-owned subsidiary of Tenaris. In October 2006, Ternium acquired a 50% interest in Exiros, while Tenaris retained the remaining 50%. The objectives of the acquisition are to obtain better purchase conditions and prices as a result of the combined demand of products and services by both companies’ demand, as well as to secure joint control over the purchase process.

D. Property, Plants and Equipment

See “—Business Overview—Production Process and Facilities.”

 

Item 4A. Unresolved Staff Comments

None.

 

Item 5. Operating and Financial Review and Prospects

The following discussion and analysis of our financial condition and results of operations is based on, and should be read in conjunction with, our audited consolidated financial statements and the related notes included elsewhere in this annual report. This discussion and analysis presents our financial condition and results of operations on a consolidated basis. We prepare our consolidated financial statements in conformity with IFRS, which differ in certain significant respects from U.S. GAAP. See note 34 to our audited consolidated financial statements included in this document, which include a description of the principal differences between IFRS and U.S. GAAP as they relate to the Company and a reconciliation of net income and shareholders’ equity for the years and at the dates indicated.

Certain information contained in this discussion and analysis is presented elsewhere in this annual report, including information with respect to our plans and strategy for our business, includes forward-looking statements that involve risks and uncertainties. See “Cautionary Statement Concerning Forward-Looking Statements”. In evaluating this discussion and analysis, you should specifically consider the various risk factors identified in this annual report and others that could cause results to differ materially from those expressed in such forward-looking statements.

Overview

Ternium is one of the leading steel companies in the Americas, offering a wide range of flat and long steel products. Ternium has operating locations in México, Argentina and Venezuela, that provide it with a strong position form which to serve its core markets. In addition, Ternium reaches the regional markets through its own network of distribution, sales and marketing offices.

Ternium primarily sells its steel products in the regional markets of North, Central and South America, where it can leverage its strategically-located manufacturing facilities to provide specialized products and delivery services to its clients. We believe that Ternium is the leading supplier of flat steel products in Argentina, through its subsidiary Siderar, and of flat and long steel products in Venezuela, through Amazonia’s subsidiary Sidor and a significant competitor in Mexico through its subsidiary Hylsamex. Amazonia became a subsidiary of Ternium on February 15, 2005, after the capitalization of certain debt instruments convertible into shares of Amazonia. Ternium also maintains a strategic presence in other major steel markets, such as Europe and Asia, through its network of commercial offices, which allows it to reach clients outside its regional markets with a comprehensive range of products and services and place products in case of slower demand in domestic economies, achieve improved effectiveness in the supply of its products and maintain a fluid commercial relationship with its clients by providing continuous services and assistance. In addition, Ternium is a competitive player in the international trade market for flat and long steel products. With the acquisition of Hylsamex, the Mexican steel company acquired in August 2005, Ternium has become a significant competitor in the Mexican market for flat and long steel products and has enhanced its position as an international steel producer, and is expected to increase its presence in these markets if and when the Grupo Imsa transaction referred to elsewhere in this annual report is completed.

 

58


Table of Contents

Ternium’s revenues are affected by general global trends in the steel industry and more specifically by the economic conditions in the countries in which it has manufacturing operations and where its clients are located. Ternium’s revenues are also impacted by events that affect the price and availability of raw materials and energy inputs needed for its operations. Furthermore, due to the highly cyclical nature of the steel industry, recent results may not be indicative of future performance, and historical results may not be comparable to future results. Investors should not rely on the results of a single period, particularly a period of peak prices, as an indication of Ternium’s annual results or future performance. The variables and trends mentioned below could also affect the results of its investments in steel related companies. See Item 4. “Information on the Company—B. Business Overview—Our Business Strategy”.

Ternium’s primary source of revenue is the sale of flat and long steel products. Management expects sales of flat and long steel products to continue to be Ternium’s primary source of revenue. The global market for such steel products is highly competitive, with the primary competitive factors being price, cost, product quality and customer service. Ternium sells its products in several countries worldwide; however, the majority of such sales are concentrated in the Americas. Specifically, Ternium’s largest markets are concentrated in Argentina and Venezuela, where its manufacturing subsidiaries are located. After the acquisition of Hylsamex, Mexico also became one of its primary markets, and is expected to become even more significant if and when the Grupo Imsa transaction referred to elsewhere in this annual report is completed.

Ternium’s results are sensitive to economic activity, steel consumption, prices in the international steel markets and trends in the steel industry. Ternium’s results of operations primarily depend on economic conditions in Argentina and Venezuela (where Ternium is a leading manufacturer and supplier), and, to a lesser extent, on economic conditions in international and regional markets such as Mercosur, the Andean Community and NAFTA. Historically, annual steel consumption in the countries where Ternium operates has varied at a rate that is linked to the annual change in each country’s gross domestic product and per capita disposable income. Recently, worldwide economic growth and favorable economic developments throughout the Americas resulted in increases in investments and in per capita disposable income, which in turn contributed to increased overall demand for Ternium’s products. For example, apparent consumption of finished steel products in Argentina increased by 3.2% and 20.5% during 2005 and 2006, respectively, due to the sustained recovery in the Argentine economy, mainly in the industrial activity, agriculture, construction and automotive sectors.

In addition, steel prices worldwide are determined by global trends of supply and demand. A decline in global steel prices generally leads to a decrease in the prices of Ternium’s products and, consequently, to a decline in revenues and profitability. As a result of the general excess capacity in the industry, the world steel industry was subject to substantial downward pricing pressure, which negatively impacted the results of steel companies in the second half of 2000 and the entire year of 2001. International steel prices generally improved beginning in 2003, driven by a strong increase in global demand fostered by economic growth in Asia and an indication of economic recovery in the United States. However, this new period of high prices for steel has encouraged reactivation of and investment in production capacity and, consequently, oversupply has led to a decline in steel prices beginning in the last quarter of 2004 and continuing through 2005. Nevertheless, prices in 2005 reached generally higher levels than those prevailing in 2001 through 2003. Steel prices began to recover in 2006, exceeding those of 2005, as a result of better global economic performance, but slightly decreased toward the second half of the year.

Furthermore, there has been a trend in recent years toward steel industry consolidation among Ternium’s competitors. For example, Aceralia, Arbed and Usinor merged in February 2002 to create Arcelor, and LNM Holdings and Ispat International merged in October 2004 to create Mittal Steel, which subsequently acquired International Steel Group. Furthermore, in June 2006, Mittal Steel and Arcelor merged to create the world’s largest steel company, Arcelor Mittal. In April 2007, Tata Steel completed the acquisition of Corus. Consolidation has enabled steel companies to lower their production costs and allowed for more stringent supply-side discipline, including through selective capacity closures. Competition from global steel manufacturers with expanded production capacity such as Mittal Steel and Arcelor, and new market entrants, especially from China, could result in significant price competition, declining margins and reductions in revenue.

Ternium’s production costs are generally sensitive to the international prices of raw materials and energy, which reflect supply and demand factors in the global steel industry. Ternium purchases substantial quantities of raw materials, including iron ore, coal, ferroalloys and scrap, for use in the production of its steel products. The availability and price of

 

59


Table of Contents

these inputs vary according to general market and economic conditions and thus are influenced by industry cycles. Since 2003, the recovery of the U.S. economy, an unprecedented demand for steel in China and shortage of shipping capacity resulted in a tight market for raw materials globally. These factors contributed to a strong boost in the prices of raw materials globally. In addition to raw materials, natural gas and electricity are both important components of Ternium’s cost structure. In 2003 and 2004, international energy prices rose substantially from the levels that had prevailed in the previous four years, reflecting higher demand for energy inputs. Moreover, an energy crisis, like that affecting Argentina since 2003, or any other disruption in the supply of natural gas or electricity, could force Ternium to acquire energy from alternative sources and could negatively impact Ternium’s costs.

Ternium’s revenues could be affected by competition from imports and dumping conditions. Ternium’s ability to profitably access the export markets varies with the value of the local currencies where it operates, the strength of the economies of the countries to which it exports and overall steel prices. Ternium’s ability to sell its products is influenced to varying degrees by trends in global trade for steel products, particularly trends in imports of steel products into its principal markets. During 2001, a period of strong over-supply, several anti-dumping measures were imposed in several countries in which Ternium operates (including Argentina, Venezuela and Mexico) to prevent foreign steel producers from “dumping” certain steel products in local markets. The recovery in global economic conditions since 2003 and strong Chinese demand reduced the previously strong competition in the international exports markets. As a consequence, several countries reduced or eliminated the protective measures established in prior years. However, a number of other trade restrictions, both in Ternium’s local and export markets, remain in place.

Prevailing exchange rates have had an impact on Ternium’s results in the past and could impact results again in the future. Ternium’s operating subsidiaries have primarily U.S. dollar-denominated revenues (other than revenues from domestic sales in Mexico), while a significant portion of their costs are denominated in local currency in the markets where they operate. As a result, Ternium’s income is affected by the fluctuation of each local currency against the U.S. dollar. If the local currency appreciates, Ternium receives less local currency for each U.S. dollar of export revenue and imports become cheaper in local currency terms; these factors tend to place a ceiling on domestic prices. However, if the local currency depreciates, as occurred in Argentina in 2002, local costs become cheaper, while imported raw materials become more expensive. Ternium manages this risk through specific hedges to the extent management considers appropriate. The Argentine peso/U.S. dollar exchange rate was relatively stable throughout 2006, with frequent interventions by the Argentine Central Bank to maintain the exchange rate at a level close to ARP3.1/USD. The Venezuelan bolívar/U.S. dollar exchange rate was set by the Venezuelan government at a rate of VEB1,917/USD in February 2004 and remained unchanged until March 2005, when it was set at VEB2,147/USD. The Mexican peso fluctuated during 2006, averaging MXN10.9/USD.

Ternium’s net income in 2006 does not benefit from a non-recurring gain recognized in 2005. As discussed elsewhere in this annual report, in February 2005, Ylopa exercised its option to convert the outstanding balance of the Amazonia convertible debt instrument into newly issued shares of that company. As a result, Ternium’s indirect participation in Amazonia increased form 31.03% to 53.4%. At the time of conversion, the shares had a fair value that exceeded the book value of the convertible debt due to the improvement of Sidor’s business conditions and, accordingly, Ternium recognized a USD188.4 million non-recurring gain.

The consolidation of Amazonia’s results beginning on February 15, 2005 changes the treatment of compensation payable to participants in Sidor’s and Amazonia’s 2003 debt restructuring. As discussed elsewhere in this annual report in connection with their participation in Sidor’s and Amazonia’s 2003 debt restructuring, the Venezuelan government and certain partners of Amazonia (through Ylopa) are entitled to receive compensation in the form of cash payments made by Sidor on a quarterly basis pursuant to a participation agreement. Prior to February 15, 2005, the cash payments received by Ternium were part of its financial income. Following the consolidation of Amazonia’s results beginning on February 15, 2005, such financial income is eliminated in consolidation; however, the cash amounts paid or payable in the future to the Venezuelan government are part of Ternium’s financial expense. See Item 4. “Information on the Company—C. Organizational Structure—Subsidiaries—Amazonia, Ylopa and Sidor—Amazonia.”

Our sales of steel products and our financial expenses are expected to increase significantly if and when we complete the Grupo Imsa transaction. On April 29, 2007, we entered into a definitive agreement, pursuant to which Ternium, or any of its subsidiaries, is expected to obtain control over Grupo Imsa, a steel manufacturer with operations in Mexico, United States and Guatemala. The transaction is subject to Mexican and U.S. regulatory approvals, and other customary conditions.

 

60


Table of Contents

Grupo Imsa has an annual production capacity of 2.2 million tons of hot rolled coils, 1.8 million tons of cold rolled products, 1.7 million tons of galvanized products, and it also produces panels and other steel products, with net sales of USD3.4 billion in 2006, according to Grupo Imsa’s 2006 Annual Report. For more information, see Item 5. “Operating and Financial Review and Prospects—G. Recent Developments—(a) Agreement to obtain control over Grupo Imsa”. If and when the transaction is consummated, we expect that our sales of steel products will increase significantly. In addition, if and when the transaction is consummated, we expect to incur additional debt up to USD2.1 billion under one or more term loan facilities, in which case our financial expenses will increase significantly.

Critical Accounting Estimates

This discussion of our operating and financial review and prospects is based on our audited consolidated financial statements, which have been prepared in accordance with IFRS. The use of IFRS (as opposed to U.S. GAAP) has an impact on our critical accounting policies and estimates. The application of U.S. GAAP would have affected the determination of consolidated net income for the years ended December 31, 2006, 2005 and 2004, and the determination of consolidated shareholders’ equity as of December 31, 2006 and 2005. See note 34 to our audited consolidated financial statements included in this annual report, for a reconciliation of our results of operations and shareholders’ equity presented under IFRS to U.S. GAAP.

The preparation of financial statements requires management to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and the related disclosure of contingent assets and liabilities. On an ongoing basis, management evaluates its accounting estimates and assumptions, including those related to doubtful accounts, obsolescence of inventory, impairment of long-term investments, impairment of other assets and contingencies, and revises them when appropriate. Management bases its estimates on historical experience and on various other assumptions that it believes to be reasonable under the circumstances. These estimates form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Although management believes that its estimates and assumptions are reasonable, they are based upon information available when the estimates and assumptions are made. Actual results may differ significantly from these estimates under different assumptions or conditions.

Our most critical accounting estimates are those that are most important to the portrayal of our financial condition and results of operations, and which require us to make our most difficult and subjective judgments, often as a result of the need to make estimates of matters that are inherently uncertain. We believe that changes in these assumptions and estimates are not likely to have a material impact on our consolidated financial statements. Our most critical accounting estimates and judgments are set forth below.

 

61


Table of Contents

Useful Lives and Impairment of Property, Plant and Equipment and Other Long-lived Assets

As permitted under IFRS 1—“First Time Adoption of IFRS,” management has elected to use the fair value of its property, plant and equipment as at January 1, 2003 as its “deemed cost.” In determining useful lives and impairment estimates, management considered, among others, the following factors: age, operating condition and level of usage and maintenance. Management conducted visual inspections for the purpose of (i) determining whether the current conditions of such assets are consistent with normal conditions of assets of similar age; (ii) confirming that the operating conditions and levels of usage of such assets are adequate and consistent with their design; (iii) establishing obsolescence levels and (iv) estimating expectancy, all of which were used in determining useful lives and impairment estimates. Management believes, however, that it is possible that the periods of economic utilization of property, plant and equipment may be different than the useful lives so determined. Impairments may result from, among other factors, changes in usage level and maintenance capital expenditure policies, obsolescence and external factors (including increases in input prices that would affect the profitability of the selected fixed assets). Any such impairment charges could have a material adverse effect on Ternium’s results of operations, financial condition and net worth. Under IFRS, assets that have an indefinite useful life are not subject to amortization and are tested annually for impairment. An impairment loss is recognized for the amount by which the asset’s carrying amount exceeds its recoverable amount. The recoverable amount is the higher of an asset’s fair value less cost to sell and the present value of estimated future cash flows. For purposes of assessing impairment, assets are grouped at the lowest levels for which there are separately identifiable cash flows (cash-generating units). Management believes that this accounting policy involves a critical accounting estimate because it is subject to change from period to period as a result of variations in economic conditions and business performance.

Allowances for Doubtful Accounts

Management makes estimates of the uncollectibility of our accounts receivable. Management analyzes our trade accounts receivable on a regular basis and, when aware of a third party’s inability to meet its financial commitments to us, management impairs the amounts due by means of a charge to the allowance for doubtful accounts. Management specifically analyzes accounts receivable and historical bad debts, customer concentrations, customer creditworthiness, current economic trends and changes in customer payment terms when evaluating the adequacy of the allowance for doubtful accounts.

In addition, a charge to the allowance for doubtful accounts is recognized when a customer makes a claim in connection with an order that has been invoiced and management estimates that, despite its efforts, we are unlikely to collect the full amount of the invoice.

Allowances for doubtful accounts are adjusted periodically in accordance with the aging of overdue accounts. For this purpose, trade accounts receivable overdue by more than 90 days, and which are not covered by a credit collateral, guarantee or similar surety, are fully provisioned.

Historically, losses due to credit failures, aging of overdue accounts and customer claims have been within expectations and in line with the provisions established. If, however, circumstances were to materially change (e.g., higher than expected defaults), management’s estimates of the recoverability of amounts due to us could be materially reduced and our results of operations, financial condition and net worth could be materially and adversely affected.

Allowance for Obsolescence of Supplies and Spare Parts and Slow-Moving Inventory

Management makes estimates of the recoverability of our inventories of supplies and spare parts based on the following criteria:

 

   

analysis of the aging of the supplies and spare parts; and

 

   

analysis of the capacity of materials to be used according to their level of preservation and of their potential obsolescence due to technological changes in the mills.

 

62


Table of Contents

In addition, in our manufacturing facilities an allowance for slow-moving inventory is made in relation to finished goods based on management’s analysis of their aging and market conditions. For this purpose, stocks of finished goods held in inventory for more than six months before the applicable reporting date are valued at their estimated recoverable value.

Historically, losses due to obsolescence and scrapping of inventory have been within expectations and the provisions established. If, however, circumstances were to materially change (e.g., significant changes in market conditions or in the technology used in the mills), management’s estimates of the recoverability of these inventories could be materially reduced and our results of operations, financial condition and net worth could be materially and adversely affected.

Loss Contingencies

We are subject to various claims, lawsuits and other legal proceedings that arise in the ordinary course of our business, including customer claims in which a third party is seeking reimbursement or indemnity. Our liability with respect to such claims, lawsuits and other legal proceedings cannot be estimated with certainty. Periodically, management reviews the status of each significant matter and assesses potential financial exposure. If the potential loss from the claim or proceeding is considered probable and the amount can be reasonably estimated, a liability is recorded. Management estimates the amount of such liability based on the information available and the assumptions and methods it has concluded are appropriate, in accordance with the provisions of IFRS. Accruals for such contingencies reflect a reasonable estimate of the losses to be incurred based on information available, including the relevant litigation or settlement strategy, as of the date of preparation of the applicable financial statement. As additional information becomes available, management will reassess its evaluation of the pending claims, lawsuits and other proceedings and revise its estimates.

With respect to the loss contingencies described in our financial statements, we do not expect to incur any losses exceeding the amounts accrued as of December 31, 2006 that would be material relative to our consolidated financial position, results of operations or liquidity as of such date. However, if reserves prove to be inadequate and we incur a charge to earnings, such charge could have a material adverse effect on our results of operations, financial condition and net worth.

Impairment of Long-term Investments

Management records an investment impairment charge when it believes an investment has experienced a decline in value that is other than temporary. Future adverse changes in market conditions or poor operating results of these investments could result in losses or an inability to recover the carrying value of the investments that may not be reflected in an investment’s current carrying value, thereby possibly requiring an impairment charge in the future.

As a consequence of certain adverse economic and financial factors experienced by Amazonia in connection with its investment in Sidor, as of December 31, 2003, Ternium recorded an allowance of USD148.3 million to account for potential losses in the value of this investment. In 2004, due to improved performance, Ternium (based on estimates prepared by its management) reversed the impairment provision recorded in previous years on its investment in Sidor. For the purpose of conducting impairment tests, the fair value of the subsidiary was determined using the discounted cash flow method, based on financial projections and on a discount rate using market parameters. Therefore, the impairment on our investment in Amazonia was reversed. In 2006 and 2005 there were no impairment charges. See note 11 to our consolidated financial statements for further reference regarding our investment in Amazonia.

Impairment of Deferred Tax Assets

Management calculates current and deferred income taxes according to the tax laws applicable to our subsidiaries in the countries in which such subsidiaries operate. However, certain adjustments necessary to determine the income tax provision are finalized only after the balance sheet is issued. In cases in which the final tax outcome is different from the amounts that were initially recorded, such differences will impact the income tax and deferred tax provisions in the period in which such determination is made. When assessing the recoverability of deferred tax assets, management considers the scheduled reversal of deferred tax liabilities, projected future taxable income and tax planning strategies. Based on those estimates, management did not record a valuation allowance at December 31, 2006.

 

63


Table of Contents

Although we believe our estimates are appropriate, significant differences in actual performance of the asset or group of assets may materially affect our asset values and results of operation.

Net Income and Shareholders’ Equity Information on a U.S. GAAP Basis

IFRS differ in significant respects from U.S. GAAP. Under U.S. GAAP, we recorded net income of USD841.0 million for fiscal year ended December 31, 2006 (compared to net income attributable to equity holders of USD795.4 million under IFRS), USD559.3 million for the fiscal year ended December 31, 2005 (compared to net income attributable to equity holders of USD704.4 million under IFRS), and net income of USD424.7 million for the fiscal year ended December 31, 2004 (compared to net income attributable to equity holders of USD457.3 million under IFRS). The principal differences between IFRS and U.S. GAAP that affected our results of operations are as follows:

 

   

differences in the valuation (at fair value) of property, plan and equipment and in the capitalization of interest on property, plant and equipment under construction;

 

   

differences in the accounting for excess of the fair value of assets acquired over cost;

 

   

differences in accounting for acquisition of minority interest in controlled subsidiaries;

 

   

differences in accounting for changes in the fair value of financial assets; and

 

   

the effects on deferred taxes and minority interest of the above reconciling items.

Shareholders’ equity determined in accordance with U.S. GAAP was USD3,435.5 million as of December 31, 2006, compared to USD3,757.6 million under IFRS and USD1,436.6 million as of December 31, 2005, compared to USD1,842.5 million under IFRS. The principal differences affecting the determination of shareholders’ equity are those described above.

For a discussion of the principal differences between IFRS and U.S. GAAP as they relate to our consolidated net income and shareholders’ equity, see note 34 to our audited consolidated financial statements included in this annual report.

A. Results of Operations

The following discussion and analysis of our financial condition and results of operations are based on our audited consolidated financial statements included elsewhere in this annual report. Accordingly, this discussion and analysis present our financial condition and results of operations on a consolidated basis. See “Presentation of Certain Financial and Other Information—Accounting Principles” and notes 2 and 4 to our audited consolidated financial statements included in this annual report. The following discussion should be read in conjunction with our audited consolidated financial statements and the related notes included in this annual report.

 

64


Table of Contents

In thousands of U.S. dollars

(except number of shares and per share data)

   For the year ended December 31,  
   2006     2005(1) (2)     2004(1) (2)     2003(1) (2)  

Selected consolidated income statement data

        

IFRS

        

Net sales

   6,568,975     4,447,680     1,598,925     1,056,566  

Cost of sales

   (4,301,384 )   (2,488,980 )   (965,004 )   (671,720 )
                        

Gross profit

   2,267,591     1,958,700     633,921     384,846  

Selling, general and administrative expenses

   (623,772 )   (500,590 )   (116,626 )   (115,662 )

Other operating expenses, net

   (7,250 )   (65,949 )   (3,124 )   (4,402 )
                        

Operating income

   1,636,569     1,392,161     514,171     264,782  
                        

Interest expense

   (112,918 )   (81,608 )   (18,257 )   (39,980 )

Interest income

   52,554     32,324     8,911     6,036  

Other financial (expenses) income, net

   (322,417 )   (261,452 )   211,635     109,550  

Excess of fair value of net assets acquired over cost

   —       188,356     —       —    

Equity in earnings of associated companies

   4,534     21,524     209,201     110,250  
                        

Income before income tax expense

   1,258,322     1,291,305     925,661     450,638  

Income tax expense

   (262,356 )   (218,492 )   (177,486 )   (94,087 )
                        

Net income for the year(3)

   995,966     1,072,813     748,175     356,551  

Attributable to:

        

Equity holders of the Company

   795,424     704,406     457,339     218,215  

Minority interest

   200,542     368,407     290,836     138,336  
                        
   995,966     1,072,813     748,175     356,551  
                        

Depreciation and amortization

   424,495     316,405     99,192     85,479  

Weighted average number of shares outstanding(4)

   1,936,833,060     1,209,476,609     1,168,943,632     1,168,943,632  

Basic earnings per share for profit attributable to the equity holders of the Company(4)

   0.41     0.58     0.39     0.19  

Diluted earnings per share for profit attributable to the equity holders of the Company(5)

   0.41     0.54     0.39     0.19  

Dividends per share declared(6)

   0.05     —       —       —    

U.S. GAAP

        

Net sales

   6,568,975     4,447,680     1,598,925     1,056,566  

Net income for the year(7)

   841,018     559,305     424,655     264,173  

Weighted average number of shares outstanding(4)

   1,936,833,060     1,209,476,609     1,168,943,632     1,168,943,632  

Basic earnings per share for profit attributable to the equity holders of the Company(4)

   0.43     0.46     0.36     0.23  

Diluted earnings per share for profit attributable to the equity holders of the Company(5)

   0.43     0.43     0.36     0.23  

(1) Combined consolidated financial information on the basis of common control. See note 2 to our audited consolidated financial statements.
(2) Certain comparative amounts for 2005, 2004 and 2003 have been reclassified to conform to changes in presentation in the current period.
(3) For IFRS purposes, net income for the year is shown gross of the interest of minority shareholders in controlled subsidiaries. The portion of net income attributable to the equity holders of the Company and to minority shareholders is disclosed separately. Under U.S. GAAP, net income for the year is shown net of minority interest.
(4) As discussed in note 29 to our audited consolidated financial statements, in October 2005, Usiminas exchanged its 5.3% equity interest in Siderar, its 16.6% equity interest in Amazonia and its 19.1% equity interest in Ylopa and other items for 227,608,254 new shares of the Company. Upon the consummation of this exchange, capital increased to USD1,396.6 million, represented by 1,396,551,887 shares of USD1.00 nominal value each. Pursuant to certain provisions contained in the Subordinated Convertible Loan Agreement, on February 6, 2006 the Company exchanged the Subordinated Convertible Loans (including interest accrued through January 31, 2006) held by ISL and converted them into shares at a conversion price of USD2 per share, resulting in the issuance of 302,962,261 new shares on February 9, 2006. As provided in the Corporate Reorganization Agreement, on February 9, 2006, ISL contributed all of its assets and liabilities (including its interest in Amazonia) to the Company in exchange for 959,482,775 newly-issued shares of the Company after the settlement of its initial public offering. In connection with the over-allotment described in note 1 to our audited consolidated financial statements, on March 1, 2006, the Company issued 22,981,360 new shares. Upon consummation of the transactions mentioned above, as of December 31, 2006, the capital of the Company was increased to USD2,004.7 million, represented by 2,004,743,442 shares, each having a nominal value of USD1.00. Ternium’s combined earnings per share for the years ended December 31, 2004 and 2003 have been calculated based on the assumption that 1,168,943,632 shares were issued and outstanding in each of the periods presented. For fiscal years 2006 and 2005, the weighted average of shares outstanding totaled 1,936,833,060 shares and 1,209,476,609 shares, respectively.
(5) Diluted earnings per share have been calculated giving effect to the conversion of the Subordinated Convertible Loans. See note 1 to our audited consolidated financial statements.
(6) On June 6, 2007, at Ternium’s annual general shareholders meeting a dividend of USD0.05 per share (USD0.50 per ADS), or approximately USD100 million was approved. Ternium paid the dividend on June 12, 2007.
(7) We are not presenting net income from continuing operations since it is identical to net income for all years presented.

 

65


Table of Contents

In thousands of U.S. dollars

(except number of shares and per share data)

   At December 31,
   2006    2005 (2)    2004(1) (2)    2003(1)

Selected consolidated balance sheet data

           

IFRS

           

Non-current assets

   6,117,284    6,116,423    1,728,410    1,610,810

Property, plant and equipment, net

   5,420,683    5,463,871    1,244,691    1,275,699

Other non-current assets(3)

   696,601    652,552    483,719    335,111

Current assets

   2,653,255    2,543,558    918,220    576,078

Cash and cash equivalents

   643,352    765,630    194,875    129,020

Other current assets

   2,002,861    1,774,768    723,345    447,058

Non-current assets classified as held for sale

   7,042    3,160    —      —  

Total assets

   8,770,539    8,659,981    2,646,630    2,186,888

Capital and reserve attributable to equity holders(4)

   3,757,558    1,842,454    1,026,725    701,821

Minority interest

   1,729,583    1,733,465    745,126    550,264

Non-current liabilities

   1,875,894    3,691,288    359,510    677,649

Borrowings

   548,401    2,399,878    1,008    283,914

Deferred income tax

   985,155    1,048,188    337,473    374,907

Other non-current liabilities

   342,338    243,222    21,029    18,828

Current liabilities

   1,407,504    1,392,774    515,269    257,154

Borrowings

   508,694    516,399    121,998    80,238

Other current liabilities

   898,810    876,375    393,271    176,916

Total liabilities

   3,283,398    5,084,062    874,779    934,803

Total equity and liabilities

   8,770,539    8,659,981    2,646,630    2,186,888

Number of shares outstanding(5)

   2,004,743,442    1,396,551,887    1,168,943,632    1,168,943,632

U.S. GAAP

           

Total assets

   8,181,931    7,938,086    2,115,271    1,201,734

Non-current liabilities

   1,938,505    3,699,842    44,647    311,054

Total shareholders’ equity

   3,435,516    1,436,638    954,255    382,703

(1) Combined consolidated financial information on the basis of common control. See note 2 to our audited consolidated financial statements.
(2) Certain comparative amounts for 2005, 2004 and 2003 have been reclassified to conform to changes in presentation in the current period.
(3) As of December 31, 2006 and 2005 includes goodwill related to the acquisition of Hylsamex for a total amount of USD397.9 million and USD399.7 million, respectively. See note 3(e) to our audited consolidated financial statements.
(4) The Company’s common stock as of December 31, 2006, 2005, 2004 and 2003 was represented by 2,004,743,442, 1,396,551,887, 1,168,943,632 and 1,168,943,632, par value USD1.00 per share, for a total amount of USD2,004.7 million, USD1,396.6 million, USD1,168.9 million and USD1,168.9 million, respectively.
(5) As described in note 29 to our audited consolidated financial statements, in October 2005, Usiminas exchanged its 5.3% equity interest in Siderar, its 16.6% equity interest in Amazonia and its 19.1% equity interest in Ylopa and other items for 227,608,254 new shares of the Company. Upon the consummation of this exchange, capital increased to USD1,396.6 million, represented by 1,396,551,887 shares of USD1.00 nominal value per share. As per the provisions contained in the Subordinated Convertible Loan Agreement, on February 6, 2006 the Company exchanged the Subordinated Convertible Loans (including interest accrued through January 31, 2006) held by ISL and converted them into shares at a conversion price of USD2 per share, resulting in the issuance of 302,962,261 new shares on February 9, 2006. As provided in the Corporate Reorganization Agreement, on February 9, 2006, ISL contributed all of its assets and liabilities (including its interest in Amazonia) to the Company in exchange for 959,482,775 newly-issued shares of the Company after the settlement of its initial public offering. In connection with the over-allotment described in note 1 to our audited consolidated financial statements, on March 1, 2006, the Company issued 22,981,360 new shares. Upon consummation of the transactions mentioned above, as of December 31, 2006, the capital of the Company was increased to USD2,004.7 million, represented by 2,004,743,442 shares, each having a nominal value of USD1.00.

 

66


Table of Contents

The following table sets forth our operating and other costs and expenses as a percentage of net sales for the years indicated:

 

Percentage of net sales

   For the year ended December 31,  
   2006     2005     2004     2003  

Net sales

   100.0 %   100.0 %   100.0 %   100.0 %

Cost of sales

   (65.5 )%   (56.0 )%   (60.4 )%   (63.6 )%
                        

Gross profit

   34.5 %   44.0 %   39.6 %   36.4 %

Selling, general and administrative expenses

   (9.5 )%   (11.3 )%   (7.3 )%   (10.9 )%

Other operating expenses, net

   (0.1 )%   (1.5 )%   (0.2 )%   (0.4 )%
                        

Operating income

   24.9 %   31.3 %   32.2 %   25.1 %
                        

Interest expense

   (1.7 )%   (1.8 )%   (1.1 )%   (3.8 )%

Interest income

   0.8 %   0.7 %   0.6 %   0.6 %

Other financial (expense) income, net

   (4.9 )%   (5.9 )%   13.2 %   10.4 %

Excess of fair value of net assets acquired over cost

   —       4.2 %   —       —    

Equity in earnings of associated companies

   0.1 %   0.5 %   13.1 %   10.4 %
                        

Income before income tax expense

   19.2 %   29.0 %   57.9 %   42.7 %

Income tax expense

   (4.0 )%   (4.9 )%   (11.1 )%   (8.9 )%
                        

Net income for the year

   15.2 %   24.1 %   46.8 %   33.7 %
                        

Attributable to:

        

Equity holders of the Company

   12.1 %   15.8 %   28.6 %   20.7 %

Minority interest

   3.1 %   8.3 %   18.2 %   13.1 %
                        

Fiscal Year Ended December 31, 2006 compared to Fiscal Year Ended December 31, 2005

Due to the consolidation of Amazonia and Hylsamex since February 15, 2005 and August 22, 2005, respectively, the results and other financial data for the year ended December 31, 2006 varied significantly from the results and other financial data for the years ended December 31, 2005 and 2004. Fiscal year ended December 31, 2006 figures consolidate the results of Hylsamex, Siderar and Sidor together with all other consolidating subsidiaries for the full year.

Overview

Ternium’s net income attributable to equity holders increased to USD795.4 million for the year ended December 31, 2006, from USD704.4 million for the year ended December 31, 2005.

The results in 2006 were attributable to:

 

   

a positive environment for improved volumes and strong steel prices;

 

   

the consolidation for the full fiscal year of Hylsa’s and Sidor’s results;

 

   

the absence of the non-recurring gain of USD188.4 million recorded in 2005 upon the conversion, in February 2005, of a convertible loan granted by Ylopa into Amazonia shares;

 

   

all of which was partially offset by increases in cost of sales, selling, general and administrative expenses, and financial expense. The increase in cost of sales was principally due to higher iron ore and coal costs in 2006 related to the annual increases in the international prices for those commodities; but also the result of three items that affected the year’s cost of sales: a charge related to an increase in pension plan benefits at Sidor; lower efficiencies that resulted from the work slowdowns and strikes at Sidor; and costs associated with the relining of blast furnace No.1 at Siderar. The increase in selling, general and

 

67


Table of Contents

administrative expenses was mainly due to higher freight and transportation expenses attributable to an increase in sales. Finally, the increase in financial expenses was principally attributable to higher interest expense resulting from the indebtedness under the facilities entered into in connection with the Hylsamex acquisition and to the recognition of Sidor’s excess cash payments that resulted in a financial loss of USD270.2 million.

Cash and cash equivalents as of December 31, 2006 were USD633.0 million (not including USD10.4 million of restricted cash), compared to USD755.0 million (not including USD10.7 million of restricted cash) in the previous year. This 16.2% decrease was mainly due to the performance of the operating activities which provided USD1,245.0 million, offset mainly by capital expenditures of USD405.8 million, acquisition of business of USD210.5 million and the net cash used in financing activities of USD756.3 million.

Net Sales

Net sales in 2006 totaled USD6,569.0 million, a 47.7% increase from USD4,447.7 million in 2005. This significant increase was primarily due to the consolidation for the full fiscal year of Amazonia and Hylsamex’s sales of USD239.9 million (net of intercompany transactions) and USD1,760.4 million (net of intercompany transactions), respectively, together with an increase in Siderar’s sales of USD305.1 million, which was partially offset by a decrease in Ternium Internacional’s sales of USD184.2 million. Both Amazonia and Hylsamex had strong sales consistent with the solid pricing environment and the positive economic activity in the markets in which they participate.

The following table shows Ternium’s total consolidated net sales by product and geographical region for the years indicated:

 

In thousands of U.S. dollars

   For the year ended
December 31,
   2006    2005

Flat Steel Product Sales

     

South and Central America

   3,038,369    2,384,649

North America

   1,960,793    948,852

Europe and Other

   48,365    326,926
         

Total Flat Steel Products Sales

   5,047,527    3,660,427
         

Long Steel Product Sales

     

South and Central America

   526,780    370,634

North America

   735,823    252,576

Europe and Other

   —      2,158
         

Total Long Steel Product Sales

   1,262,603    625,368
         

Total Other Sales(1)

   258,845    161,885
         

Total Sales

   6,568,975    4,447,680
         

(1) The item “Total Other Sales” includes mainly sales of pig iron and iron ore.

 

68


Table of Contents

In 2006, Ternium derived the majority of its revenues (approximately 76.8 %) from sales of flat steel products. Total sales of flat steel products increased significantly from USD3,660.4 million in 2005 to USD5,047.5 million in 2006. USD95.2 million (net of intercompany transactions) and USD1,142.7 million (net of intercompany transactions) resulted from the consolidation of Amazonia’s and Hylsamex’s results for the full year, respectively, together with an increase in Siderar’s sales of USD290.2 million, partially offset by a decrease in Ternium International’s sales. After the consolidation of Amazonia and Hylsamex’s results in 2005, long steel product sales increased significantly from USD625.4 million in 2005 to USD1,262.6 million in 2006. The variation was as a consequence of an increase in Amazonia and Hylsamex’s sales of USD135.6 million and USD530.0 million respectively.

The other sales increased from USD161.9 million in 2005 to USD258.8 million in 2006, mainly as a consequence of the consolidation of Hylsamex, which exported iron ore pellets and fines to China, as well as sales of iron ore pellets from Amazonia.

Sales Volume

The following table shows our sales volume by product and market for the years indicated:

 

In thousands of tons

(unaudited)

   For the year ended December 31,
   2006    2005

Flat Steel Product Sales Volume

     

South and Central America

   4,361    3,463

North America

   2,413    1,406

Europe and Other

   88    514
         

Total Flat Steel Product Sales Volume

   6,861    5,383
         

Long Steel Product Sales Volume

     

South and Central America

   948    709

North America

   1,225    503

Europe and Other

   —      5
         

Total Long Steel Product Sales Volume

   2,174    1,218
         

Total Sales Volume(1)

   9,035    6,600
         

(1) The “Total Sales Volume” does not include the tons related to Other sales.

Total sales volume increased by 36.9% to 9,035 thousand tons in 2006 from 6,600 thousand tons in 2005. The increase of Sidor’s and Hylsamex’s sales volume of 201 thousand tons and 2,202 thousand tons (net of intercompany transactions), respectively, for the fiscal year 2006 mainly reflects the consolidation of these companies, together with an increase in Siderar’s sales volume of 341 thousand tons, which was partially offset by a decrease in Ternium International’s sales volume of 309 thousand tons.

In 2006, flat steel product sales volume increased by 27.5% to 6,861 thousand tons from 5,383 thousand tons in 2005. The increase of 1,383 thousand tons (net of intercompany transactions) of Hylsamex’s sales volume was mainly due to the effect of the consolidation for the full year. Sales in South and Central America increased by 898 thousand tons, or 26.0%, from 3,463 thousand tons in 2005 to 4,361 thousand tons in 2006. The variation was attributable to an increase of Sidor’s and Siderar’s sales of 468 thousand tons and 471 thousand tons, respectively. Sales to North America increased by 71.7% to 2,413 thousand tons in 2006 from 1,405 thousand tons in 2005. The substantial difference was due to an increase of Hylsamex’s sales volume of 1,351 thousand tons, partially offset by a decrease in Sidor’s sales of 411 thousand tons. Sales to Europe and Other markets decreased by 426 thousand tons, or 82.9%, from 514 thousand tons in 2005 to 88 thousand tons in 2006 due to the due to the shift in sales to Ternium’s traditional markets.

In 2006, long steel product sales volume increased by 78.5% to 2,174 thousand tons from 1,218 thousand tons in 2005, due to the effect of the consolidation for the full year of Sidor and Hylsamex’s sales volume of 200 thousand tons and 819 thousand tons, respectively. Sales in South and Central America increased by 239 thousand tons, or

 

69


Table of Contents

33.7%, from 709 thousand tons in 2005 to 948 thousand tons in 2006, as a consequence of an increase of Sidor’s sales of 207 thousand tons. Sales to North America increased by 722 thousand tons, or 143.5%, from 503 thousand tons in 2005 to 1,225 thousand tons in 2006, as a result of the consolidation for the full year of Hylsamex’s sales of 802 thousand tons. Sales to Europe and other markets were no recorded during 2006.

The following table shows the percentage of market distribution of Ternium’s total sales by region for the years indicated:

 

Percentage of total sales

   For the year ended December 31,  
   2006     2005  

South and Central America

   56.4 %   63.1 %

North America

   42.1 %   29.0 %

Europe and Other

   1.5 %   7.9 %
            
   100.0 %   100.0 %
            

Sales destined to the Americas increased to 98.5% of the net sales in 2006 from 92.1% of net sales in 2005 primarily due to the effect of the consolidation of Hylsamex’s sales for the full year in 2006. During the same period, sales destined to South and Central America decreased slightly as percentage of net sales, while sales destined to North America increased sharply from 29.0% of net sales in 2005 to 42.1% of net sales in 2006. This variation was mainly due to the consolidation of Hylsamex for the full fiscal year in 2006, which is located in Mexico and channeled most of its shipments in the North America Region. Sales to Europe and other markets decreased to 1.5% of net sales in 2006 from 7.9% of net sales in 2005, due to the shift in sales to Ternium’s traditional markets.

Sales prices

Revenue per ton of flat steel products increased by 8.2% to USD736 in 2006 from USD680 in 2005. Revenue per ton for long steel products increased by 13.0% to USD581 in 2006 from USD514 in 2005. While prices remained relatively stable throughout 2006 in the South and Central America region, steel prices in the North America region grew during the first part of 2006, peaked in August and softened later in the year due to increased imports pressure in the U.S. and a de-stocking process in Mexico and in the U.S.

Cost of sales

Total cost of sales increased by 72.8%, from USD2,489.0 million in 2005 to USD4,301.4 million in 2006. The variation was mainly an increase of Hylsamex’s cost of sales of USD1,401.8 million due to the consolidation for the full fiscal year in 2006, together with an increase in Sidor’s and Siderar’s cost of sales of USD347.0 million and 249.6 million, respectively. Ternium experienced higher iron ore and coal costs in 2006 related to the annual increases in the international prices for those commodities. Furthermore, 2006 results included three items that affected the year’s cost of sales: a charge related to an increase in pension plan benefits at Sidor; lower efficiencies that resulted from the work slowdowns and strikes at Sidor that ended on November 8, 2006; and costs associated with the relining of blast furnace No.1 at Siderar, which resumed operations on January 31, 2007.

Natural gas and electricity prices for the South and Central America operations were relatively stable. Energy for the Venezuelan operations is tied to long-term contracts, and prices of electricity and natural gas under such contracts were relatively stable. Operations in Argentina are largely self-sufficient in electricity through their self-generation capabilities. Most of the energy input at this operation is obtained from metallurgical coal and pet coke, the balance being fulfilled with fuel oil and natural gas. Natural gas prices in Argentina showed only slight fluctuations.

The natural gas consumption for the operations in Mexico was largely fixed through hedging mechanisms, which prevented major cost changes associated with natural gas prices. Electricity prices in Mexico experienced slight increases due to the higher finished steel production that required the use of additional electricity at higher peak hour rates.

 

70


Table of Contents

Average cost of sales per ton of flat steel products increased by 28.8% from USD372 per ton in 2005 to USD479 per ton in 2006 largely due to additional processing cost associated with Hylsamex’s richer product mix and also to overall increases in raw materials and energy, such as, iron ore, coal and coke, costs related to the annual increases in the international prices for those commodities. The average cost of sales per ton of long steel products increased by 24.2% from USD318 per ton in 2005 to USD395 per ton in 2006, mainly due to the same reasons expressed previously for flat steel products.

Cost of sales, expressed as a percentage of net sales, increased to 65.5% during 2006, compared to 56.0% in 2005. The increase was due to higher costs of supplies, raw materials and labor costs, together with a product mix with a lower gross margin, and also due to Hylsamex’s consolidation for the full fiscal year.

Selling, general and administrative expenses

Selling, general and administrative expenses in 2006 were USD623.8 million, or 9.5% of net sales, compared to USD500.6 million, or 11.3% of net sales in 2005.

The consolidation of Sidor and the acquisition of Hylsamex increased the absolute figure for selling, general and administrative expenses, which reflected higher freight associated with the increased volume of sales and higher personnel costs due to the integration of the three main companies into Ternium. Despite the increase in selling, general and administrative expenses, the reduction in the ratio of selling, general and administrative expenses to net sales in 2006 as compared to the previous year reflects a significant rationalization in white collar head count and improved efficiencies.

Other operating expenses, net

Other operating income and expenses decreased by USD58.7 million, from a net loss of USD65.9 million for the fiscal year ended December 31, 2005 to a net loss of USD7.3 million in 2006. This variation was mainly due to a decrease of USD41.0 million in the de-recognition property, plant and equipment, together with a decrease of USD4.9 million in the charge accounted for 2006 related to the provisions for legal claims.

Operating income

Operating income totaled USD1,636.6 million in 2006, 17.6% higher than the operating income of USD1,392.2 million in 2005. This variation was mainly due to a positive environment for improved volumes and strong steel pricing, partially offset by higher input costs. Operating income as a percentage of sales was 24.9% in 2006, compared to 31.3% in 2005.

Financial expenses, net

Net financial expense resulted in a net financial loss of USD382.8 million in 2006, compared to a net financial loss of USD310.7 million in 2005. The significant change was due to:

 

   

an increase of USD31.3 million in interest expense, from USD112.9 million in 2006 to USD81.6 million in 2005, due to higher interest costs resulting from the indebtedness under the facilities entered into in connection with the Hylsamex acquisition;

 

   

an increase in net financial losses from the participation account in an amount of USD49.0 million. Until February 15, 2005, Ternium accounted for its investment in Amazonia under the equity method of accounting. Thus, income arising from the Participation Account Agreement has been recorded under Income from Participation Account within Financial income, net. Upon the conversion of the Amazonia convertible debt instrument, on February 15, 2005, Ternium acquired indirect control of Amazonia and began accounting for such investment on a consolidated basis. Following the consolidation of Amazonia’s results, income resulting from Ternium’s share of the Participation account has been offset against Amazonia’s loss for the same concept and shown net under loss from participation account line item;

 

71


Table of Contents
   

an increase of USD10.5 million in the debt issuance costs, mainly in connection with the Hylsamex’s acquisition in 2005; and

 

   

an increase of USD13.7 million in other charges due to the issuance of letters of credit, payment of commissions and other financial costs associated to the higher level of activity;

 

   

all of which was partially offset by an USD20.2 million increase in interest income and a USD12.3 million decrease in losses related to net foreign exchange transactions and changes in the fair value of derivatives.

Equity in earnings of associated companies

Ternium’s share in the results of associated companies during 2006 was a gain of USD4.5 million, compared to a gain of USD21.5 million for 2005. The decrease was mainly due to the earnings of associated companies recorded under the equity method until February 15, 2005, relating to Ternium’s investment in Amazonia.

Income tax expense

During 2006, Ternium recorded an income tax expense of USD262.4 million, compared to an income tax expense of USD218.5 million for the fiscal year ended December 31, 2005. The effective tax rate of Ternium is calculated as income tax on income (before equity in earnings of associated companies, income tax and excess of fair value of net assets acquired over cost and minority interest). Ternium’s effective tax rate for 2006 was 20.9%, compared to 20.2% in 2005.

Net income attributable to minority interest

Net income attributable to minority interest for the fiscal year ended December 31, 2006 was USD200.5 million compared to USD368.4 million in 2005. The decrease was mainly due to an increase in Siderar’s minority interest results of USD10.6 million and a decrease of USD165.7 million related to Amazonia’s acquisition in February 15, 2005, and the Usiminas and ISL’s exchanges.

Fiscal Year Ended December 31, 2005 compared to Fiscal Year Ended December 31, 2004

Due to the consolidation of Amazonia and Hylsamex since February 15, 2005 and August 22, 2005, respectively, the results and other financial data for the year ended December 31, 2005 varied significantly from the results and other financial data for the previous year. The consolidation of Amazonia resulted, among other things, in the elimination of intercompany sales between Sidor and Ternium’s subsidiaries, following which trading activities are no longer material.

Overview

Ternium’s net income attributable to equity holders increased to USD704.4 million for the year ended December 31, 2005, from USD457.3 million for the year ended December 31, 2004.

The improved results in 2005 were also the result of:

 

   

the acquisition of Amazonia and Hylsamex, since February 15, 2005 and August 22, 2005, respectively;

 

   

a non-recurring gain of USD188.4 million recorded upon the conversion, in February 2005, of a convertible loan granted by Ylopa into Amazonia shares;

 

   

which were partially offset by an increase in financial expenses principally attributable to higher interest expense resulting from the indebtedness under the facilities entered into in connection with the Hylsamex acquisition, and also attributable to the effect of the change in the recognition of Sidor’s excess cash payments that resulted in a financial loss of USD265.2 million.

 

72


Table of Contents

Cash and cash equivalents as of December 31, 2005 were USD755.0 million (not including USD10.7 million of restricted cash), compared to USD194.9 million in the previous year. This 287.4% increase was mainly due to the consolidation of Amazonia and Hylsamex in 2005.

Net Sales

Net sales in 2005 totaled USD4,447.7 million, a 178.2% increase from USD1,598.9 million in 2004. This significant increase was primarily due to the consolidation of Amazonia and Hylsamex’s sales of USD1,863.5 million (net of intercompany transactions) and USD723.8 million (net of intercompany transactions), since February 15, 2005 and August 22, 2005, respectively, together with an increase in Siderar’s sales of USD292.8 million, which was partially offset by a decrease in Ternium Internacional’s sales of USD31.0 million. Both Amazonia and Hylsamex enjoyed strong sales consistent with the solid pricing environment and the positive economic activity in the markets in which they participate.

The following table shows Ternium’s total combined consolidated net sales by product and geographical region for the years indicated:

 

In thousands of U.S. dollars

   For the year ended December 31,
   2005    2004

Flat Steel Product Sales

     

South and Central America

   2,384,651    999,567

North America

   948,852    94,299

Europe and Other

   326,926    172,331
         

Total Flat Steel Products Sales

   3,660,429    1,266,197
         

Long Steel Product Sales

     

South and Central America

   370,634    —  

North America

   252,576    —  

Europe and Other

   2,157    —  
         

Total Long Steel Product Sales

   625,367    —  
         

Trading Sales(1)

     

South and Central America

   —      116,624

North America

   —      136,530

Europe and Other

   —      72,073
         

Total Trading Sales

   —      325,227
         

Total Other Sales(2)

   161,885    7,501
         

Total Sales

   4,447,680    1,598,925
         

(1) The item “Trading Sales” includes mainly trading activities for the year ended December 31, 2004 and 2003. The consolidation of Amazonia’s results since February 15, 2005 resulted in the elimination of intercompany sales between Sidor and Ternium’s subsidiaries, following which trading activities are no longer material.
(2) The item “Total Other Sales” includes mainly sales of pig iron, iron ore pellets and steel tubes.

 

73


Table of Contents

In 2005, Ternium derived the majority of its revenues (approximately 82.3%) from sales of flat steel products. Total sales of flat steel products increased significantly from USD1,266.2 million in 2004 to USD3,660.4 million in 2005. USD1,569.5 million (net of intercompany transactions) and USD429.8 million (net of intercompany transactions) resulted from the consolidation of Amazonia’s and Hylsamex’s results, respectively, together with an increase in Siderar’s sales.

After the consolidation of Amazonia and Hylsamex’s results in 2005, long steel product sales totaled USD625.4 million. Because Amazonia and Hylsamex are the only Ternium subsidiaries that manufacture long steel products, no such sales were recorded in 2004.

Due to the consolidation of Amazonia’s results since February 15, 2005, the intercompany sales between Sidor and Ternium’s subsidiaries were eliminated, following which trading activities are no longer material. Furthermore, other sales increased from USD7.5 million in 2004 to USD161.9 million in 2005, mainly as a consequence of the consolidation of Hylsamex, which exported iron ore pellets and fines to China, as well as sales of iron ore pellets from Amazonia and steel tubes from the tubing facilities located in Mexico.

Sales Volume

The following table shows our sales volume by product and market for the years indicated:

 

In thousands of tons

(unaudited)

   For the year ended December 31,
   2005    2004

Flat Steel Product Sales Volume

     

South and Central America

   3,463    1,718

North America

   1,406    147

Europe and Other

   514    311
         

Total Flat Steel Product Sales Volume

   5,383    2,176
         

Long Steel Product Sales Volume

     

South and Central America

   709    —  

North America

   503    —  

Europe and Other

   5    —  
         

Total Long Steel Product Sales Volume

   1,218    —  
         

Trading Sales Volume(1)

     

South and Central America

   —      159

North America

   —      246

Europe and Other

   —      142
         

Trading Sales Volume

   —      546
         

Total Sales Volume(2)

   6,600    2,722
         

(1) The item “Trading Sales Volume” includes mainly trading activities for the year ended December 31, 2004 and 2003. The consolidation of Amazonia’s results since February 15, 2005 resulted in the elimination of intercompany sales between Sidor and Ternium’s subsidiaries, following which trading activities are no longer material.
(2) The Total Sales Volume does not include 130 thousand tons and 26 thousand tons of other sales item in 2005 and 2004, respectively.

Total sales volume increased by 142.5% to 6,600 thousand tons in 2005 from 2,722 thousand tons in 2004. The increase mainly reflects the consolidation of Sidor’s and Hylsamex’s sales volume of 3,037 thousand tons and 770 thousand tons (net of intercompany transactions) for the fiscal year 2005, which was partially offset by a decrease of 36 thousand tons of Siderar’s sales volume.

In 2005, flat steel product sales volume increased by 147.4% to 5,383 thousand tons from 2,176 thousand tons in 2004. The increase was mainly due to the effect of the consolidation of 2,550 thousand tons (net of intercompany transactions) and 429 thousand tons (net of intercompany transactions) of Sidor and Hylsamex’s sales volume, respectively. The difference was mainly attributable to increases in Siderar’s sales volume. Sales in South and

 

74


Table of Contents

Central America increased by 1,744 thousand tons, or 101.5%, from 1,718 thousand tons in 2004 to 3,463 thousand tons in 2005. The increase was attributable to the consolidation of Sidor’s sales, which occurred primarily in the South and Central America region. Sales to North America increased by 856.1% to 1,406 thousand tons in 2005 from 147 thousand tons in 2004. The substantial increase was due to the consolidation of Hylsamex’s sales volume. Sales to Europe and Other markets increased by 65.6% from 311 thousand tons in 2004 to 514 thousand tons in 2005 due to the strong demand in the European market.

Long steel product sales were recorded in 2005 as a result of the consolidation of Sidor and Hylsamex’s results and reached a total of 1,218 thousand tons in 2005. In 2004, no such sales were recorded because Ternium did not offer long steel products. Of the 1,218 thousand tons of long steel products volume sold in 2005, 758 thousand tons (net of intercompany transactions) and 340 thousand tons (net of intercompany transactions) corresponded to Sidor and Hylsamex, respectively, while the difference corresponded mostly to Ternium Internacional. The long steel product markets are traditionally more local, particularly reinforcing bar, with Sidor volumes corresponding largely to South and Central America and those of Hylsamex to North American markets. In addition, Sidor sold wire rod to North America.

The following table shows the percentage of market distribution of Ternium’s total combined sales by region for the years indicated:

 

Percentage of total sales

   For the year ended December 31,  
   2005     2004  

South and Central America

   63.1 %   70.3 %

North America

   29.0 %   14.4 %

Europe and Other

   7.9 %   15.3 %
            
   100.0 %   100.0 %
            

Sales destined to the Americas increased to 92.1% of net sales in 2005 from 84.7% of net sales in 2004 primarily due to the effect of the consolidation of Sidor’s and Hylsamex’s sales. During the same period, tons destined to South and Central America decreased slightly as percentage of net sales, while tons destined to North America increased from 14.4% of net sales in 2004 to 29.0% of net sales in 2005. This variation was mainly due to the consolidation of Hylsamex, which is located in Mexico and channeled most of its shipments in the North America Region. Sales to Europe and other markets decreased to 7.9% of net sales in 2005 from 15.3% of net sales in 2004, due to the shift in sales to Ternium’s traditional markets.

Sales prices

Revenue per ton of flat steel products increased by 16.8% to USD680 in 2005 from USD582 in 2004. Although international steel prices receded from the peak levels observed during the second half of 2004 and early 2005, international reference prices remained at very strong levels. The healthy sales figure in 2005 was due to better pricing in emerging economies, as well as to an improvement in the product mix resulting from the consolidation of Hylsamex (which has a higher value added product mix) in the latter part of 2005. Revenue per ton for long steel products reached USD513 per ton in 2005. Due to the consolidation of Amazonia’s results in 2005, sales between Sidor and Ternium’s subsidiaries were eliminated, following which trading activities are no longer material.

Cost of sales

Total cost of sales rose by 157.9%, from USD965.0 million in 2004 to USD2,489.0 million in 2005 primarily due to the consolidation of Sidor’s and Hylsamex’s cost of sales amounting to USD809.5 million and USD530.6 million, respectively, together with an increase of USD228.6 million in Siderar’s cost of sales. The increase, however, was partially offset by a decrease in Ternium Internacional’s cost of sales. The increase was mainly due to higher prices for metallurgic coal, coke and iron ore for Siderar. Also, labor costs for Siderar increased from USD89.4 million in 2004 to USD104.7 million in 2005, and freight and transportation costs increased from USD18.7 million to USD22.7 million for the same period.

 

75


Table of Contents

The consolidation of Hylsamex’s resulted in additional costs associated with processing raw steel into value added products. Costs for iron ore were relatively stable as iron ore was supplied entirely from Hylsamex’s mines. Energy costs experienced a significant increase, mainly in natural gas, which rose throughout the year. The increase in gas prices was partially offset by hedging and a price rebate offered by the Mexican government late in 2005 as a response to the effect of hurricane Katrina on gas prices. Conversely, Sidor’s consolidation resulted in lower costs for raw materials due to its favorable access to energy resources and proximity to premier sources of iron ore.

Average cost of sales per ton of flat steel products increased by 24.8% from USD298 per ton in 2004 to USD372 per ton in 2005 largely due to additional processing cost associated with Hylsamex’s richer product mix and also to overall increases in raw materials and energy, such as, iron ore, coal, coke, natural gas and electricity. The average cost of sales per ton of long steel products was USD318 in 2005.

Cost of sales, expressed as a percentage of net sales, decreased to 56.0% during 2005, compared to 60.4% in 2004. The decrease was due to an increase in revenue per ton, due to a combination of improved mix and better product pricing, which more than compensated for the increases in costs of supplies, raw materials and labor costs.

Selling, general and administrative expenses

Selling, general and administrative expenses in 2005 were USD500.6 million, or 11.3% of net sales, compared to USD116.6 million, or 7.3% of net sales in 2004.

Selling expenses in 2005 increased by USD210.0 million to USD268.2 million, or 6.0% of net sales, compared to USD58.2 million, or 3.6% of net sales, in 2004. The increase was mainly due to the consolidation of Amazonia and Hylsamex’s expenses, in an amount of USD151.9 million and USD42.8 million, respectively. Also, Siderar’s selling expenses increased due to higher freight and transportation and services and fees expenses.

General and administrative expenses in 2005 were USD232.4 million, or 5.2% of net sales, compared to USD58.4 million, or 3.7% of net sales in 2004. The increase was mainly due to the consolidation of Sidor’s and Hylsamex’s expenses, in an amount of USD86.8 million and USD62.5 million, respectively. Siderar’s expenses increased by USD20.6 million in 2005 due to higher labor costs, taxes and services and fees. The higher level of general and administrative expenses as a percentage of sales also reflected one-time charges of USD22.5 million in 2005 related to the administrative reorganization of Hylsamex.

Other operating expenses, net

Other operating income and expenses showed a net loss of USD65.9 million for the fiscal year ended December 31, 2005, compared to a net loss of USD3.1 million in 2004. This variation was mainly due to a loss of USD54.3 million from the disposal of property, plant and equipment that was recognized in 2005 in connection with the closure of Hylsamex’s ingot casting mill and other facilities.

Operating income

Operating income totaled USD1,392.2 million in 2005, 170.8% higher than the operating income of USD514.2 million in 2004. The large increase was primarily due to the consolidation of Amazonia and Hylsamex in 2005, which amounted to USD808.7 million and USD35.7 million, respectively (net of intercompany transactions). Operating income as a percentage of sales was 31.3% in 2005, compared to 32.2% in 2004.

Financial (expenses) income, net

Net financial expense resulted in a net financial loss of USD310.7 million in 2005, compared to a net financial gain of USD202.3 million in 2004. The significant change was due to:

 

   

a significant increase in interest expense, which totaled USD81.6 million in 2005 from USD18.3 million in 2004. The increase was mainly due to the consolidation of Amazonia and Hylsamex’s results in 2005, in

 

76


Table of Contents
 

amounts of USD20.9 million and USD18.5 million, respectively, as well as to increased indebtedness in Siderar and Ternium under the Ternium Credit Facility and the Siderar Credit Facility, related to the acquisition of Hylsamex on August 22, 2005; and

 

   

the effect of the change in the recognition of Sidor’s excess cash distribution related to the participation account established as a result of its 2003 debt restructuring. On February 15, 2005, Ternium acquired indirect control of Sidor and began accounting for such investment on a consolidated basis. Accordingly, any excess cash payments received by Ternium were eliminated in the consolidation process, while any excess cash payments made by Sidor to third parties were recorded as a financial loss. This resulted in a financial loss of USD265.2 million in 2005.

Excess of Fair Value of Net Assets Acquired Over Cost

Excess of fair value of net assets acquired over cost was USD188.4 million in 2005, while no amount was recorded in 2004. This non-recurring gain is related to the conversion of Amazonia’s convertible debt instruments into Amazonia’s shares in February 2005. At the time of conversion, the shares had a fair value that exceeded the value of the convertible debt due to the improvement of Sidor’s business conditions. Amazonia is the direct controlling shareholder of Sidor.

Equity in earnings of associated companies

Ternium’s share in the results of associated companies during 2005 was a gain of USD21.5 million, compared to a gain of USD209.2 million for 2004. The variation was mainly due to the consolidation of Ternium’s investment in Amazonia, which was accounted for under the equity method until February 15, 2005. In 2004, equity in earnings of associated companies reached a gain of USD60.9 million mainly due to the performance of Ternium’s investment in Amazonia and the considerable upturn experienced by Sidor, its operating subsidiary, and in addition, the reversal of the impairment provision for USD148.3 million in connection with the Amazonia investment recorded in 2003.

Income tax expense

During 2005, Ternium recorded an income tax provision of USD218.5 million, compared to an income tax provision of USD177.5 million for the fiscal year ended December 31, 2004. The effective tax rate of Ternium is calculated as income tax on income (before equity in earnings of associated companies, income tax and excess of fair value of net assets acquired over cost and minority interest). For the year 2005, Ternium’s effective tax rate was 20.2%, compared to 24.8% in 2004. This effective tax rate reduction is attributable to the following reasons:

 

   

in 2005, Sidor absorbed taxable income by using tax loss carryforwards, that were previously impaired; and

 

   

while Sidor’s payments to Ylopa as compensation for its participation in Sidor and Amazonia’s 2003 debt restructuring are tax deductible, Ylopa’s income is tax-free as a result of the application of the Venezuela-Portugal tax treaty and Ylopa’s status as a company organized in the Madeira tax-free zone.

Net income attributable to minority interest

Net income attributable to minority interest for the fiscal year ended December 31, 2005 was USD368.4 million compared to USD290.8 million in 2004. The increase was primarily due to the consolidation of Amazonia since February 15, 2005, which triggered the recognition of the minority interest in the subsidiary. Lower results at Siderar in 2005, with the consequent effect on the minority interest, partially offset the mentioned increase.

Foreign Currency Fluctuations

See Item 11. “Quantitative and Qualitative Disclosure About Market Risk—Foreign Exchange Exposure Risk”.

 

77


Table of Contents

Governmental Economic, Fiscal, Monetary or Political Policies or Factors

See Item 3. “Key Information—D. Risk Factors— Risks Relating to the Countries in Which We Operate”.

B. Liquidity and Capital Resources

We obtained funds from our operations and short-term as well as long-term borrowings from banking institutions. These funds are primarily used to finance our working capital and capital expenditures requirements, acquisitions and dividend payments to our shareholders. We hold money market investments and variable-rate or fixed-rate securities from investment grade issuers. During 2006, we significantly reduced our financial indebtedness, from USD2,308.8 million to USD1,054.9 million using our strong liquidity position. At the beginning of 2006, Ternium made a prepayment in an aggregate principal amount of USD500 million on the credit facility incurred by the Company in connection with the Hylsamex acquisition, mainly with the proceeds from its initial public offering. In addition, in 2006 we prepaid other indebtedness in aggregate principal amount of USD544.5 million.

Management believes that funds from operations and our access to external borrowing will be sufficient to satisfy our current working capital needs and to service our debt in the foreseeable future. Management also believes that our liquidity and capital resources give us adequate flexibility to manage our planned capital spending programs and to address short-term changes in business conditions.

The following table shows the changes in our cash and cash equivalents, excluding funds placed in trust, for each of the periods indicated below:

 

     For the year ended December 31,  

In thousands of U.S. dollars

   2006     2005 (1)     2004 (1)  

Net cash provided by operating activities

   1,244,973     1,262,455     517,565  

Net cash used in investing activities

   (610,353 )   (2,351,984 )   (91,701 )

Net cash (used in) provided by financing activities

   (756,283 )   1,163,368     (359,887 )
                  

(Decrease) Increase in cash and cash equivalents

   (121,663 )   73,839     65,977  

Acquisition of business – Amazonia

   —       305,342     —    

Acquisition of business – Hylsamex

   —       215,411     —    

Effect of exchange rate changes

   (315 )   (34,487 )   (122 )

Cash and cash equivalents at the beginning of the year

   754,980     194,875     129,020  
                  

Cash and cash equivalents at the end of the year

   633,002 (2)   754,980 (2)   194,875  
                  

(1) Cash and cash equivalents do not include certain funds that Ternium placed in a trust established to ensure that the financial needs for the normal development of Siderar’s operations were met. As of December 31, 2005 and 2004, the amounts placed in the trust totaled USD5.2 million and USD88.8 million, respectively, and were presented as Other Current Investments as described in note 21 of Ternium’s consolidated financial statements.
(2) As of December 31, 2006 and 2005, cash and cash equivalents do not include USD10.4 million and USD10.7 million, respectively, of restricted cash.

Fiscal Year Ended December 31, 2006 compared to Fiscal Year Ended December 31, 2005

Overview

During 2006, Ternium’s primary source of funding was cash flows from its operating activities.

Cash and cash equivalents decreased by 16.2%, or USD122.0 million, from USD755.0 million as of December 31, 2005 (not including USD10.7 million of restricted cash) to USD633.0 million as of December 31, 2006 (not including USD10.4 million of restricted cash). This amount includes an increase in the initial cash and cash equivalent of USD305.3 million and USD215.4 million, attributable to the consolidation of Amazonia and Hylsamex, respectively. In addition to cash and cash equivalents, as of December 31, 2005, we held other current

 

78


Table of Contents

investments totaling USD5.2 million, which were primarily financial resources placed in a trust established to ensure that the financial needs for the normal development of Siderar’s operations were met.

Operating activities

Net cash provided by operations during 2006 was USD1,245.0 million compared to USD1,262.5 million in 2005.

The main reasons for the variation in operating cash flow were:

 

   

the absence of gain of excess of net assets acquired over cost recognized in 2005 of USD188.4 million and a loss accounted for in 2006 related to changes in Sidor’s pension plan for an amount of USD46.9 million;

 

   

a strong increase in working capital needs of USD330.6 million that mainly reflects greater requirements for inventories and trade receivables, partially offset by a decrease in other receivables and other assets.

Investing activities

Net cash used in investing activities in 2006 was USD610.4 million, compared to USD2,352.0 million in 2005. The variation was mainly due to:

 

   

a capital expenditures increase from USD244.9 million in 2005 to USD405.8 million in 2006, as a result of the consolidation of Amazonia and Hylsamex for the full fiscal year in 2006. During 2006, the main capital expenditures, were the installation of facilities for storing and handling slabs, a new reheating furnace and the upgrading of the hot strip mill No.1 in Hylsa; the relining of blast furnace No.1, as well as, improvements and enhancements in the areas of sinter production, coking facilities and the hot strip mill in Siderar; and new oxygen production facilities, the revamping and expansion of the Midrex direct reduction of iron modules and disbursements associated with the installation of a new ladle furnace in Sidor; and

 

   

a decrease in the acquisitions of businesses in the amount of USD1,986.1 million, that in 2005 were invested principally in the acquisition of Hylsamex. In 2006, Ternium made principally the following transactions for an amount of USD207.3 million: the purchase of the remaining 50% equity interest in Acerex for USD44.6 million; the acquisition of tube manufacturing assets from Acindar by Siderar for USD55.2 million; and the purchase of CVRD’s 4.85% equity stake in Siderar for USD107.5 million.

Financing activities

Net cash used in financing activities was USD756.3 million in 2006, compared to USD1,163.4 million of net cash provided by financing activities in 2005. The variation was mainly due to:

 

   

net proceeds of USD525.0 million from Ternium’s initial public offering in January 2006;

 

   

a decrease in proceeds from borrowings of USD1,968.1 million, that comprised the loans in which we entered into in 2005 for the acquisition of Amazonia and Hylsamex;

 

   

an increase in the repayments of borrowings of USD766.9 million, due to Ternium’s use of its strong liquidity position to reduce its financial indebtedness; and

 

   

a decrease in dividends paid to the Company’s and minority’s shareholders of USD342.0 million.

 

79


Table of Contents

Fiscal Year Ended December 31, 2005 compared to Fiscal Year Ended December 31, 2004

Overview

During 2005, Ternium’s primary source of funding was cash flows from its operating activities. In the third quarter of 2005, we significantly changed the mix of financial resources as a result of the credit facilities obtained in connection with the acquisition of Hylsamex.

Cash and cash equivalents increased by 287.4%, or USD560.1 million, from USD194.9 million as of December 31, 2004 to USD755.0 million as of December 31, 2005. This amount includes an increase in the initial cash and cash equivalent of USD305.3 million and USD215.4 million, attributable to the consolidation of Amazonia and Hylsamex, respectively. In addition to cash and cash equivalents, we held other current investments totaling USD5.2 million, which were primarily financial resources placed in a trust established to ensure that the financial needs for the normal development of Siderar’s operations were met.

Operating activities

Net cash provided by operations during 2005 was USD1,262.5 million compared to USD517.6 million in 2004. The main reasons for the variation in operating cash flow were:

 

   

the consolidation of Amazonia and Hylsamex since February 15, 2005 and August 22, 2005, respectively;

 

   

the strong increase in business activity, with higher prices and sales volumes, which resulted in a net income increase of USD324.6 million; and

 

   

a reduction in working capital needs of USD259.1 million that mainly reflects a decrease in cash requirements for receivables and prepayments of USD141.4 million and trade receivables for USD153.1 million. The reductions were partially offset by an increase in requirements for inventories for USD19.3 million and lower sources provided by trade payables and other liabilities of USD16.0 million.

Investing activities

Net cash used in investing activities in 2005 was USD2,352.0 million, compared to USD91.7 million in 2004. The variation was mainly due to the:

 

   

capital expenditures increase from USD92.6 million in 2004 to USD244.9 million in 2005, as a result of the consolidation of Amazonia and Hylsamex, in amounts of USD71.1 million and USD42.7 million, respectively, together with an increase of USD37.2 million in Siderar’s capital expenditures;

 

   

a USD2,196.7 million payment applied to the acquisition of Hylsamex; and

 

   

the liquidation of the trust fund of USD83.6 million, which provided cash but was partially offset by the applications described above.

Financing activities

Net cash provided by financing activities was USD1,163.4 million in 2005, compared to USD359.9 million of net cash used in financing activities in 2004. The variation reflects the dividends paid in cash and other distributions to the Company’s shareholders and to the minority shareholders made in 2005 of USD238.7 million and USD130.6 million, respectively, compared to USD80.9 million and USD70.3 million, respectively, in 2004, and a net increase in borrowings of USD1,477.8 million in 2005 compared to USD208.7 million in 2004, as a result of the Hylsamex acquisition.

 

80


Table of Contents

Principal Sources of Funding

Funding Policies

Management’s policy is to maintain a high degree of flexibility in operating and investment activities by maintaining adequate liquidity levels and ensuring access to readily available sources of financing. We obtain financing primarily in U.S. dollars. Whenever feasible, management bases its financing decisions, including the election of term and type of the facility, on the intended use of proceeds for the proposed financing.

Financial Liabilities

Our financial liabilities currently consist of loans with banks and related parties and overdrafts. These facilities are mainly denominated in U.S. dollars. As of December 31, 2006, U.S. dollar-denominated financial liabilities represented 91% of total financial liabilities. Total financial debt decreased from USD2,916.3 million as of December 31, 2005 to USD1,057.1 million as of December 31, 2006. During 2006, Ternium’s bank borrowings decreased by USD1,253.9 million, principally due to the repayment of a significant portion of the credit facility of USD1.0 billion entered into by Ternium to fund the Hylsamex’s acquisition and the prepayment of several syndicated loans in Hylsa and Hylsamex. Also, in 2006, borrowings with related parties were reduced from USD607.5 million in 2005 to USD2.2 million in 2006, as a result of the conversion of the Subordinated Convertible Loans. As of December 2006, current borrowings were 48% of total borrowings, of which less of 1% corresponded to borrowings with related parties. See Item 7. “Major Shareholders and Related Party Transactions—B. Related Party Transactions—Financial Operations and Administrative Services.”

The following table shows Ternium’s financial liabilities as of December 31 of each of the last three years:

 

In thousands of U.S. dollars

   2006     2005     2004

Borrowings with related parties

   2,161     607,472     75,927

Bank borrowings

   1,054,934 (1)   2,308,805 (1)   46,636

Other

   —       —       443
                

Total borrowings

   1,057,095     2,916,277     123,006
                

(1) Net of debt issuance costs

The weighted average interest rates at December 31, 2006, 2005 and 2004 shown below were calculated using the rates set for each instrument in its corresponding currency and weighted using the dollar-equivalent outstanding principal amount of those instruments at December 31, 2006, 2005 and 2004, respectively.

 

     2006     2005     2004  

Bank borrowings

   6.82 %   6.08 %   2.25 %

The maturity of our financial liabilities is as follows:

 

At December 31, 2006

  

1 year

or less

  

1 - 2

years

  

2 – 3

years

  

3 - 4

years

  

4 - 5

years

  

Over 5

Years

   Total

Borrowings with related parties

   2,161    —      —      —      —      —      2,161

Borrowings(1)(2)

   506,533    290,804    120,021    94,923    1,358    41,295    1,054,934
                                  

Total borrowings

   508,694    290,804    120,021    94,923    1,358    41,295    1,057,095
                                  

(1) Borrowings are primarily bank borrowings with third parties. See “—Liquidity and Capital Resources—Principal Sources of Funding—Financial Liabilities”.
(2) Net of debt issuance costs.

 

81


Table of Contents

For information on our derivative financial instruments, please see Item 11. “Quantitative and Qualitative Disclosures About Market Risk” and note 26 to our audited consolidated financial statements.

Principal Borrowings

Our credit agreements and other debt instruments contain covenants, financial tests and cross-default provisions. As of December 31, 2006, we were in compliance with all of our financial covenants. Management believes that current covenants allow us a high degree of operational and financial flexibility and do not impair our ability to obtain additional financing at competitive rates. For further information on our financial liabilities, borrowings and commitments please see notes 27 and 28(iii) to our audited consolidated financial statements.

C. Research and Development, Patents and Licenses, Etc.

See Item 4. “Information on the Company—B. Business Overview—Research and Development”.

D. Trend Information

See “—Overview.”

E. Off-Balance Sheet Arrangements

Ternium does not use “off-balance sheet arrangements” as such term is defined by applicable SEC rules. However, as described above Ternium has various off-balance sheet commitments for the provision of raw materials (iron ore, entered into by Sidor, Amazonia’s operating subsidiary) and energy (gas, gas transportation and steam for the production of electricity, entered into by Siderar). Off-balance sheet commitments are discussed in note 28(iii) to Ternium’s audited consolidated financial statements included in this annual report.

F. Contractual Obligations

The following table summarizes our contractual obligations at December 31, 2006, and the effect such obligations are expected to have on our liquidity and cash flow in future periods:

 

In millions of U.S. dollars

   Payments Due by Period
as of December 31,2006

Contractual Obligations

   Total    Less
than 1
year
   1-3
years
   4-5
years
   After 5
years

Borrowings(1)

   1,057.1    508.7    505.7    1.4    41.3

Estimated interest payments(2)

   112.0    54.9    44.6    2.9    9.6

Purchase Obligations(3)

   2,570.5    278.9    798.9    484.0    1,008.8

Sales Obligations(4)

   1,087.6    110.9    332.7    221.8    422.3
                        

Total Contractual Obligations

   4,827.2    953.4    1,681.9    710.1    1,482.0
                        

(1) Borrowings are primarily bank borrowings with third parties. See “—Liquidity and Capital Resources—Principal Sources of Funding—Financial Liabilities”.
(2) Variable rates used in the projection are the ones settled in the current interest period and are considered to be fixed over the years.
(3) Includes contracts with T.G.N. (gas transportation), PDVSA GAS, ALASA (industrial gases), Siderca (steam), Iberdrola and Edelca (electricity), Peña Colorada (mines) and Matesi.
(4) Includes a contract for the sale of pellets by Sidor to FMO and a contract for the sale of blooms to TAVSA. For further information see “Item 4. Information on the Company—Business Overview—Raw Materials and Energy—Venezuela” and “Item 7. Major Shareholders and Related Party Transactions—B. Related Party Transactions—Sales of Steel Products and Raw Materials.”

G. Recent Developments

(a) Agreement to obtain control over Grupo Imsa

On April 29, 2007 Ternium entered into a definitive agreement under which it expects to obtain control of Grupo Imsa for a total consideration of approximately USD1.7 billion. Under the agreement, Ternium, or any of its

 

82


Table of Contents

subsidiaries, will make a tender offer in accordance with applicable Mexican law for all of the issued and outstanding share capital of Grupo Imsa at a price of USD6.40 per share. Concurrently with the consummation of the tender offer, Grupo Imsa’s majority shareholders, owning approximately 90.4% of Grupo Imsa’s issued and outstanding share capital, will have their shares redeemed in cash at the same price per share.

Ternium currently expects to finance the transactions primarily through debt, for which bank commitments have been secured.

The transaction is subject to Mexican and U.S. regulatory approvals, and other customary conditions. If consummated, the transaction is expected to close in the third quarter of 2007.

Grupo Imsa is a steel manufacturer with operations in Mexico, the United States and Guatemala. Grupo Imsa has an annual production capacity of 2.2 million tons of hot rolled coils, 1.8 million tons of cold rolled products and 1.7 million tons of galvanized products. In addition, Grupo Imsa produces panels and other steel products. Grupo Imsa had net sales of USD3.4 billion in 2006.

(b) Annual General Shareholders Meeting

On June 6, 2007, the Company’s shareholders re-elected the eleven of the twelve members of the Company’s board of directors to each serve a one-year term ending at the Company’s next annual general shareholders meeting to be held on June 4, 2008 and appointed Pedro Pablo Kuczynski as a member of the board of directors.

The board of directors subsequently re-appointed Paolo Rocca and Rinaldo Campos Soares as chairman and vice chairman, respectively, of the Company’s board of directors; Daniel Novegil as chief executive officer; and re-appointed Ubaldo Aguirre as chairman of the audit committee of the Company’s board of directors, with Adrián Lajous Vargas and Pedro Pablo Kuczynski being the other members of such committee.

At the annual general shareholders’ meeting, the Company’s shareholders approved a dividend of USD0.05 per share (USD0.50 per ADS), or approximately USD100 million. The Company paid the dividend on June 12, 2007.

The Company’s shareholders also approved the Company’s consolidated financial statements as of and for the fiscal year ended December 31, 2006 and re-appointed PricewaterhouseCoopers (acting, in connection with the Company’s annual accounts required under Luxembourg law, through PricewaterhouseCoopers S.ár.l., and, in connection with the Company’s annual and interim financial statements required under the laws of other relevant jurisdictions, through Price Waterhouse & Co. S.R.L.) as the Company’s independent auditors for the fiscal year 2007.

 

Item 6. Directors, Senior Management and Employees

A. Directors and Senior Management

Board of Directors

Our articles of association provide for a board of directors consisting of a minimum of five (5) members (when the shares of the Company are listed on a regulated market as they currently are) and a maximum of fifteen (15) members. The board of directors is vested with the broadest powers to act on behalf of the Company and accomplish or authorize all acts and transactions of management and disposal which are within its corporate purpose and which are not specifically reserved in the articles of association to the general shareholders’ meetings.

The board of directors is required to meet as often as required by the interests of the Company. A majority of the members of the board of directors in office present or represented at each board of director’s meeting constitutes a quorum, and resolutions may be adopted by the vote of a majority of the directors present or represented. In case of a tie, the chairman is entitled to cast the deciding vote.

 

83


Table of Contents

Directors are elected at the annual ordinary general shareholders’ meeting to serve one-year renewable terms, as determined by the shareholders. Our current board of directors is comprised of 12 directors and an audit committee, which is comprised entirely of independent directors.

The shareholders may dismiss all or any one director at any time, with or without cause, by resolution passed by majority vote, irrespective of the number of shares present or represented at the general shareholders’ meeting. Pursuant to the terms of a shareholders’ agreement, dated July 20, 2005, between Usiminas and I.I.I.-Industrial Investments Inc., a wholly-owned subsidiary of San Faustín organized in the Cayman Islands and the Company’s indirect controlling shareholder (“I.I.I. CI”), Usiminas is entitled to designate two directors, one of whom shall be the vice-chairperson of the board of directors, and I.I.I. CI is entitled to designate the chief executive officer of the Company and seven directors (and, in the case of an increase in the total number of directors, a majority of such directors), one of whom shall be the chairperson of the board of directors. The shareholders’ agreement will remain in full force and effect so long as Usiminas and I.I.I. CI each hold at least 5% of the shares of the Company or until it is terminated by either of Usiminas or I.I.I. CI pursuant to its terms. Rinaldo Campos Soares and Bertoldo Machado Veiga were nominated as directors pursuant to this agreement.

In addition, on January 9, 2006, Tenaris and ISL entered into a shareholders’ agreement, pursuant to which ISL will take all actions in its power to cause one of the members of the Company’s board of directors to be one nominated by Tenaris and any directors nominated by Tenaris only be removed pursuant to written instructions by Tenaris. Tenaris and ISL also agreed to cause any vacancies on the board of directors to be filled with new directors nominated by either Tenaris or ISL, as applicable. On April 27, 2007, ISL assigned all of its rights and obligations under the shareholders’ agreement to its sole shareholder I.I.I. C.I. The shareholders’ agreement will remain in effect so long as each of the parties holds at least 5% of the shares of the Company or until it is terminated by either Tenaris or I.I.I. C.I. pursuant to its terms. Carlos A. Condorelli was nominated as a director pursuant to this agreement.

Under the Company’s articles of association, an independent director is a director who:

 

  (i) is not employed, and has not been employed in an executive capacity by the Company or any of its subsidiaries within the five years preceding the ordinary general shareholders’ meeting at which the candidate for the board of directors was voted upon;

 

  (ii) does not receive consulting, advisory or other compensatory fees from the Company or any of its subsidiaries (other than fees received as a member of the board of directors of any committee thereof and fees received as a member of the board of directors or other governing body, or any committee thereof, of any of the Company’s subsidiaries);

 

  (iii) is not a person who directly or indirectly controls the Company;

 

  (iv) does not have, and does not control a business entity that has, a material business relationship with the Company, any of its subsidiaries or a person who directly or indirectly controls the Company, if such material business relationship would reasonably be expected to adversely affect the director’s ability to properly discharge his or her duties;

 

  (v) does not control, and is not and has not been, within the five years preceding the ordinary general shareholders’ meeting at which the candidate for the board of directors was voted upon, employed by a present or former internal or external auditor of the Company, any of its subsidiaries or a person who directly or indirectly controls the Company; and

 

  (vi) is not a spouse, parent, sibling or relative up to the third degree of, and does not share a home with, any of the persons above described.

Within the limits of applicable law, the board of directors of the Company may delegate to one or more persons, whether or not members of the board of directors, the Company’s day-to-day management and the authority to

 

84


Table of Contents

represent the Company, provided that such delegation shall be subject to prior authorization by the general shareholders’ meeting. On September 14, 2005, following the requisite authorization at the general shareholders’ meeting, the board of directors delegated such day-to-day management and authority to Daniel A. Novegil. On June 6, 2007, the Company’s shareholders re-elected Mrs. Ubaldo Aguirre, Roberto Bonatti, Rinaldo Campos Soares, Carlos Condorelli, Adrian Lajous, Bertoldo Machado Veiga, Bruno Marchettini, Gianfelice Mario Rocca, Paolo Rocca and Daniel Novegil as members of the Company’s board of directors and appointed Mr. Pedro Pablo Kuczynski as a member of the board of directors to each serve a one-year term ending at the Company’s next annual general shareholders meeting to be held in June 4, 2008. The board of directors subsequently re-appointed Paolo Rocca and Rinaldo Campos Soares as chairman and vice chairman, respectively, of the Company’s board of directors and Daniel Novegil as chief executive officer.

The following table sets forth the current members of the board of directors of the Company, their respective offices on the board, their principal occupation, their years of service as board members and their age.

 

Name

  

Position

  

Principal Occupation

   Years as
Director
   Age at
December 31,
2006

Paolo Rocca(1)

   Chairman    Chairman and C.E.O. of Tenaris and Chairman of Ternium    1    54

Rinaldo Campos Soares

   Vice-chairman    President of Usiminas    1    68

Ubaldo Jose Aguirre

   Director    Managing Director of Aguirre, Gonzalez, Marx & Asociados S.A.    1    58

Roberto Bonatti(1)

   Director    President of San Faustín    1    57

Carlos Condorelli

   Director    C.F.O. of Tenaris    1    55

Adrián Lajous

   Director    Energy advisor at McKinsey & Company    1    63

Bertoldo Machado Veiga

   Director    Chairman of the board of Usiminas    1    64

Bruno Marchettini

   Director    Member of the board of San Faustín, Tenaris and Siderar.    1    65

Daniel Novegil

   Director    C.E.O. of the Company    1    54

Gianfelice Mario Rocca(1)

   Director    Chairman of the board of directors of San Faustín    1    58

Pedro Pablo Kuczynski

   Director    Partner of Westfield Capital    —      68

(1) Paolo Rocca and Gianfelice Rocca are brothers, and Roberto Bonatti is Paolo and Gianfelice Rocca’s first cousin.

Paolo Rocca. Mr. Rocca has served as our chairman since 2005. He is also chairman and chief executive officer of Tenaris S.A., director and vice president of San Faustin N.V. and director of Techint Financial Corporation N.V. Mr. Rocca currently serves as the chairman of Tubos de Aceros de México S.A. (“Tamsa”) and Dalmine S.p.A.; vice president of Confab Industrial S.A. and honorary president of the Board of Directors of Siderar. Mr. Rocca is member of the executive committee of the IISI (“International Iron and Steel Institute”) and member of the International Advisory Committee of the NYSE (“New York Stock Exchange”). Mr. Rocca is an Italian citizen.

Rinaldo Campos Soares. Mr. Campos Soares has served as our vice-chairman since 2005. Mr. Campos Soares currently serves as the president of Usiminas and as a member of its board of directors, as the president of Cosipa, chairman of the board of directors of Rio Negro Comércio e Indústria de Aço, chairman of the board of directors of Usiparts Sistemas Automotivos, president of Usiminas Mecânica and president of Fundação São Francisco Xavier. In addition, he serves as vice president of the Brazilian Steel Institute and a member of the Brazilian National Council for Economic and Social Development. Mr. Campos Soares also serves as the general honorary consul of Japan for the State of Minas Gerais. Mr. Campos Soares has served in various positions at Usiminas throughout his career, including plant general manager, executive director of operations, head of production, head of the industrial engineering department, head of the hot strip mill, head of the cold strip mill, and head of metallurgy and inspection. He previously served as coordinator of industrial research at Fundação Gorceix and was formerly employed as a researcher at the Institute de Recherches de la Siderurgie de France. To date, Mr. Soares has 38 years of experience in the steel industry. Mr. Campos Soares is a Brazilian citizen.

 

85


Table of Contents

Ubaldo Aguirre. Mr. Aguirre has served on our board of directors since January 12, 2006. Mr. Aguirre is a managing director of Aguirre, Gonzalez and Marx S.A., an Argentine investment banking firm, and also serves as a member of the board of directors of Juan Minetti S.A., a subsidiary of Holcim, the Swiss cement producer. Since 2005, he also serves as chairman of the board of directors of Permasur S.A. since 2000 as member of the board of directors of URS Argentina S.A. Mr. Aguirre formerly served as director and chairman of the audit committee of Siderar. Mr. Aguirre began his career at the World Bank in Washington, D.C. In addition, Mr. Aguirre has been a member of the boards of each of Argentina’s Central Bank—where he was responsible for that country’s external borrowing program and financial negotiations—Banco de la Nación Argentina and Banco Nacional de Desarrollo. He also served as the Republic of Argentina’s financial representative for Europe in Geneva and negotiator on behalf of the Republic of Argentina with the Paris Club. Mr. Aguirre is an Argentine citizen.

Roberto Bonatti. Mr. Bonatti has served as a director since 2005. Mr. Bonatti is the grandson of Agustín Rocca and has been involved in businesses of the companies controlled by San Faustin, or the Techint Group, specifically in the engineering and construction and corporate sectors, throughout his career. He was first employed by the Techint Group in 1976, as deputy resident engineer in Venezuela. In 1984, he became a director of San Faustín, and, since 2001, he has served as its president. In addition, Mr. Bonatti currently serves as president of Tecpetrol and Techint Compañía Técnica Internacional S.A.C.I. of Argentina and as a director of Tenaris and Siderar. Mr. Bonatti is an Italian citizen.

Carlos Condorelli. Mr. Condorelli has served as a director since 2005. Mr. Condorelli currently serves as Director since 2007 and chief financial officer of Tenaris, a position that he assumed in October 2002. Mr. Condorelli began his career within the Techint Group in 1975, as an analyst in the accounting and administration department of Siderar. Mr. Condorelli has held several positions within Tenaris and other Techint Group companies, including finance and administrative director of Tamsa and president of the board of directors of Empresa Distribuidora La Plata S.A., or Edelap, an Argentine utilities company. He is an Argentine citizen.

Adrián Lajous. Mr. Lajous has served on our board of directors since January 12, 2006. Mr. Lajous currently serves as the senior energy advisor to McKinsey & Company, chairman of the Oxford Institute for Energy Studies, president of Petrométrica, S.C. and non-executive director of Schlumberger, Ltd. Mr. Lajous began his career teaching economics at El Colegio de México and in 1977 was appointed director general for energy at Mexico’s Ministry of Energy. Mr. Lajous joined Pemex in 1983, where he held a succession of key executive positions including executive coordinator for international trade, corporate director of planning, corporate director of operations and director of refining and marketing. From 1994 until 1999, he served as chief executive officer of Pemex and chairman of the boards of the Pemex Group of operating companies. Mr. Lajous is a Mexican citizen.

Bertoldo Machado Veiga. Mr. Machado Veiga has served on our board of directors since January 12, 2006. Mr. Machado Veiga currently serves as chairman of the board of Usiminas and as a director at Fasal S/A Comércio e Indústria de Produtos Siderúrgicos. He was first employed by Usiminas as a lawyer in 1968 and was appointed head of its legal department in 1986. Mr. Machado Veiga has served as the representative of the employees on the board of directors of Usiminas since its privatization in 1991. Mr. Machado Veiga is a Brazilian citizen.

Bruno Marchettini. Mr. Marchettini has served on our board of directors since January 12, 2006. He has retired from executive positions but continues to be an advisor to the Techint Group in steel technology matters. He is a member of the board of San Faustín, Tenaris and Siderar. Mr. Marchettini is an Italian citizen.

Daniel A. Novegil. Mr. Novegil has served as a director and as our chief executive officer. Mr. Novegil joined Siderar in 1978 and was appointed as its general director in 1991. In 1993, following the merger of the privatized company Somisa with Propulsora, he was appointed managing director of Siderar. In 1998, after the acquisition of Sidor, Mr. Novegil was appointed chairman and chief executive officer of Sidor. In March 2003, Mr. Novegil was designated executive vice-president of the Techint Flat and Long Steel Division, with executive responsibilities over Siderar and Sidor. He became president of Siderar in May 2005. He is an Argentine citizen.

Gianfelice Mario Rocca. Mr. Rocca has served in our board of directors since January 12, 2006. Mr. Rocca is chairman of the board of directors of San Faustín, a director of I.I.I. Industrial Investments Inc., Techint Financial

 

86


Table of Contents

Corporation N.V., Tenaris, Dalmine S.p.A., Tamsa, president of the Humanitas Group and president of the board of directors of Techint-Compagnia Tecnica Internazionale S.p.A. and Techint S.A. de C.V. In addition, he sits on the board of directors or executive committees of several companies, including Sirti S.p.A., Riunione Adriatica di Sicurtà, RCS Quotidiani, Fastweb, Buzzi Unicem and Cam Finanziara S.p.A. He is vice president of Confindustria, the leading association of Italian industrialists. He is also a member of the European Advisory Board of the Harvard Business School, the Trilateral Commission. Mr. Rocca is an Italian citizen.

Pedro Pablo Kuczynski. Mr. Kuczynski was appointed as Director in the shareholders’ meeting held on June 6, 2007 and took office on June 7, 2007. He was Prime Minister of Peru in 2005-2006 and prior to that he was the Minister of Economy and Finance from 2001. He was the Republic of Peru’s Minister of Energy and Mines in 1980-82. He was president until 2001 of a private equity firm he founded in 1992 after spending ten years as Chairman of First Boston International (today Credit Suisse) in New York. Since 2007, he is Senior Advisor to the Rohatyn Group, a firm specializing in emerging markets. He ran a bauxite mining company affiliated with Alcoa between 1977 and 1980. He began his career at the World Bank in 1961 and was in the 1970s head of its Policy Planning Division, Chief Economist for Latin America and Chief Economist of IFC. He was born in Peru in 1938 and educated in Peru and at Oxford and Princeton. He is a U.S. and Peruvian citizen.

Director Liability

Under Luxembourg law, a director may be liable to the Company for any damage caused by management errors, such as wrongful acts committed during the execution of the mandate granted to them by the Company, and to the Company, its shareholders and third parties in the event that the Company, its shareholders, or third parties suffer a loss due to an infringement of either the Luxembourg Company Law or the Company’s articles of association. A shareholder may in certain circumstances have rights to damages if a duty owed by the directors is breached.

Under Luxembourg law, related party transactions involving directors and giving rise to personal conflicts of interest are subject to approval procedures established by Luxembourg law requiring the abstention of the relevant director and are to be reported at the next shareholders’ meeting. Any director may be removed from or reappointed to office at any time by a shareholders’ resolution passed by simple majority vote, irrespective of the number of shares present or represented at the meeting.

A director will not be liable for acts committed in accordance with a resolution if, notwithstanding his presence at the meeting at which such a resolution was adopted, such director advised the board of directors that he opposed the resolution and caused a record of his statement of opposition to be included in the minutes of the meeting.

Causes of action against directors for damages may be initiated by the Company upon a resolution of the shareholders passed by a simple majority vote, irrespective of the number of shares present or represented at the meeting. Causes of action against directors who misappropriate corporate assets (for example, by using corporate assets for their own benefit) or commit a breach of trust (for example, by breaching their fiduciary duties to the Company) may be brought by any shareholder for personal losses different from those of the Company. In general, claims must be brought within five years from the occurrence of an action for which liability may apply, or in the case of fraud, from the date the fraud is discovered.

It is customary in Luxembourg that the shareholders expressly discharge the members of the board of directors from any liability arising out of or in connection with the exercise of their mandate when approving the annual accounts of the Company at the annual shareholders’ meeting. However, such discharge will not release the directors from liability for any damage caused by wrongful acts committed during the execution of their mandate or due to an infringement of either the Luxembourg Company Law or the Company’s articles of association.

Auditors

Our articles of association require the appointment of at least one independent auditor chosen from among the members of the Luxembourg Institute of Independent Auditors. The primary responsibility of the independent auditor is to audit our annual accounts and to submit a report on the accounts to shareholders at the annual general shareholders’ meeting. Following a recommendation from our Audit Committee, auditors are appointed by the

 

87


Table of Contents

shareholders through a resolution passed by a simple majority vote irrespective of the number of shares present or represented. Shareholders can determine the number and the term of office of the auditors at the general shareholders’ meeting. Luxembourg law does not allow directors to serve concurrently as independent auditors. An auditor’s term may not exceed one year and they may be reappointed and dismissed at any time.

PricewaterhouseCoopers (acting, in connection with the Company’s annual accounts required under Luxembourg law, through PricewaterhouseCoopers S.ár.l., and, in connection with the Company’s annual and interim financial statements required under the laws of other relevant jurisdictions, through Price Waterhouse & Co. S.R.L.) are the Company’s independent auditors for the year ending December 31, 2006.

Senior Management

The following table sets forth certain information concerning our senior management:

 

Name

  

Age at

December 31, 2006

  

Position

Daniel Novegil

   54    Chief Executive Officer; Director

Roberto Philipps

   60    Chief Financial Officer

Alfredo A. Indaco

   53    International Commercial Officer

Regulo Salinas

   51    North Region Area Manager

Martín Berardi

   49    South Region Area Manager

Julián Eguren

   43    Central Region Area Manager

Oscar Montero Martínez

   46    Planning and Operations General Director

Luis Andreozzi

   56    Engineering and Environment Director

Miguel Punte

   59    Human Resources Director

Rubén Bocanera

   50    Chief Information Officer

Daniel A. Novegil. Mr. Novegil has served as our Chief Executive Officer. Mr. Novegil joined Siderar in 1978 and was appointed as its general director in 1991. In 1993, following the merger of the privatized company Somisa with Propulsora, he was appointed managing director of Siderar. In 1998, after the acquisition of Sidor, Mr. Novegil was appointed chairman and chief executive officer of Sidor. In March 2003, Mr. Novegil was designated executive vice-president of the Techint Flat and Long Steel Division, with executive responsibilities over Siderar and Sidor. He became president of Siderar in May 2005. To date, Mr. Novegil has 28 years of experience in the Techint Group. He is an Argentine citizen.

Roberto Philipps. Mr. Philipps currently serves as our Chief Financial Officer. He joined Siderar in 1988 and has held the position of chief financial officer of Siderar and chief financial officer of Amazonia. He oversaw the restructuring of Sidor’s debt in 2000 and 2003 and of Siderar’s debt in 2002. From 2003 until August 2005, he was the chief executive officer of TGN. He assumed his current position at the Company in September 2005. He is also past president of the Argentine Financial Executives Institute (IAEF). Mr. Philipps is an Argentine citizen.

Alfredo Indaco. Mr. Indaco currently serves as our International Commercial Officer. He began his career with the Techint Group in 1982 as an employee of the Marketing and Export Department of Siderca. In 2001, he left his position as export director of Siderca to serve as commercial director of Siderar, a position that he held until he assumed his present position at the Company. Mr. Indaco is an Argentine citizen.

Régulo Salinas. Mr. Salinas currently serves as our North Region Area Manager. He is responsible for all our operations within Mexico. He began his career with our subsidiary in Mexico in 1978 as “budget and cost analyst” in Hylsa. He has held several executive positions, including managing director of the Flat Products Division and the Bar and Rod Division of the former Hylsa and vice-president of sales and marketing, vice-president of administration and vice-president of planning. He is President of Canacero (Camara Nacional de la Industria del Hierro y el Acero) in Mexico and vice-chairman of the AISI (“American Iron and Steel Institute”) and member of the executive committee of the board of the SMA (Steel Manufacturers Organization) in the United States. Mr. Salinas is a Mexican citizen.

 

88


Table of Contents

Martín Berardi. Mr. Berardi currently serves as our South Region Area Manager. He began his career with the Techint Group in 1980 as a trainee in Propulsora Siderúrgica. He has held several positions within the Techint Group including in Propulsora Siderúrgica, Siat S.A.I.C. and Siderca. He served as managing director of Siat (1992-1995), managing director of Tamsa (1995-2000), president and chief executive officer of Sidor (2000-2004) and became managing director of Siderar in October 2004, a position which he held until he assumed his present position at the Company. He was president of the “Instituto Venezolano de Siderurgia” between 2002 and 2004 and he has also been vice-president of “Centro Industriales Siderurgicos de Argentina” since 2004. Mr. Berardi is an Argentine citizen.

Julián Eguren. Mr. Eguren currently serves as our Central Region Area Manager. Since July 2005, he has been the chief executive officer of Ternium’s Venezuelan subsidiary Sidor. Prior to that he served as commercial director of Sidor. He has held several other executive positions since joining the Techint Group in 1987, such as chief executive officer of Tavsa, general manager of Socominter (Venezuela), economic planning manager and treasurer of Tamsa and commercial planning manager of Siderca. He is also director of IVES (Venezuelan Steel Institute), ILAFA (Latin-American Institute of Iron and Steel) and Matesi, and president of CAVEARG (Venezuelan Argentinean Chamber). Mr. Eguren is an Argentine citizen.

Oscar Montero Martínez. Mr. Montero currently serves as our Planning and Operations General Director. He began his career with the Techint Group in 1984 as a commercial analyst in Siderar. Since then, he has held several positions within Siderar in the planning, commercial and procurement areas. In 1998 he assumed the position of strategic planning director in Sidor. Since 2005, he serves as planning and operations general director of the Company. Mr. Montero is an Argentine citizen.

Luis Andreozzi. Mr. Andreozzi currently serves as our Engineering and Environment Director. He began his career with the Techint Group in 1968 as a trainee in Siderca. He has held several positions within other Techint Group companies including Techint Engineering Company, or TEING, Siderar and Sidor. Most recently, he served as construction manager of TEING (1986-1992), construction manager of Siderar (1992-1998), engineering and environment general manager of Sidor (1998-2004) and technology manager of the Techint Flat and Long Steel Division, a position he held until he assumed his present position at the Company. Mr. Andreozzi is an Italian citizen.

Miguel Punte. Mr. Punte currently serves as our Human Resources Director. In 1970, Mr. Punte joined Siderar, where he held several positions within Human Resources Department. In 1984, he joined Finma S.A., or Finma, an affiliate of the Techint Group that provides human resources services to Techint Group companies. At Finma, Mr. Punte served first as human resources manager and later as human resources director until 2005, when he was appointed human resources director of Siderar, a position that he held until he assumed his present position at the Company. Mr. Punte is an Argentine citizen.

Rubén Bocanera. Mr. Bocanera currently serves as our Chief Information Officer. He joined the Techint Group in 1983 as a junior analyst for Siderca. Since then he has held several positions in different Techint Group companies, including project manager and automation and control manager of Siderca and Sidor and chief information officer of Siderar. Since 2002, he has been responsible for the information technology unit of the Techint Flat Steel Division. Mr. Bocanera is an Argentine citizen.

B. Compensation

The compensation of the Company’s directors is approved annually at the ordinary general shareholders’ meeting. The aggregate compensation earned by directors and executive officers during 2006 amounted to approximately USD10,276 thousand.

On January 1, 2007, Ternium adopted an employee retention and long term incentive program. Pursuant to this program, certain senior executives may be granted a number of units, with the value of such units being determined based in the Company’s equity value (excluding minority interest). Each unit entitles the holder thereof to receive

 

89


Table of Contents

cash amounts equal to the amount of dividends paid from time to time to the Company’s shareholders. Units vest over a four-year period and we will redeem vested units on the tenth anniversary of the grant date, or when the employee ceases employment if that should be sooner; provided, however, that we are required to repurchase the units at full value (regardless of vesting) within ten business days of the death or permanent disability of the relevant beneficiary. Compensation under this program is not expected to exceed 35% of the total annual compensation of the beneficiaries.

C. Board Practices

See “—Directors and Senior Management”.

There are no service contracts between any director and Ternium that provide for benefits upon termination of employment.

Audit Committee

On June 6, 2007, our board of directors re-appointed Ubaldo Aguirre (chairman) and Adrián Lajous, and appointed Pedro Pablo Kuczynski, as members of its audit committee. All three members of the audit committee are independent directors. The members of the audit committee are not eligible to participate in any incentive compensation plan for employees of the Company or any of its subsidiaries.

Under our articles of association and the audit committee charter, the audit committee is required, among other things, to report to the board of directors on its activity and the adequacy of the Company’s systems of internal control over financial reporting. In addition, the charter of the audit committee sets forth, among other things, the audit committee’s purpose and responsibilities. The audit committee assists the board of directors in its oversight responsibilities with respect to the integrity of the Company’s financial statements and is responsible for making recommendations regarding the appointment, dismissal, compensation, retention and oversight of, and assess the independence of the Company’s independent auditors (see Item 16.C for additional information about the audit committee’s procedures with respect to our independent auditors). The audit committee also performs other duties entrusted to it by the Company’s board of directors.

In addition, the audit committee is required by the Company’s articles of association to review “Material Transactions,” as such term is defined by the Company’s articles of association, to be entered into by the Company or its subsidiaries with “Related Parties,” as such term is defined by the Company’s articles of association (other than transactions reviewed and approved by the independent members of the board of directors of the Company or through any other procedures that the board of directors may deem substantially equivalent to the foregoing) , in order to determine whether their terms are consistent with market conditions or are otherwise fair to the Company and/or its subsidiaries. In the case of Material Transactions entered into by the Company’s subsidiaries with Related Parties, the Company’s audit committee will review those transactions entered into by those subsidiaries whose boards of directors do not have independent members, or that have not been reviewed and approved by such independent directors or through any other procedures that the board of directors of the Company may deem substantially equivalent to the foregoing.

Under the Company’s articles of association, as supplemented by the audit committee’s charter:

 

   

a Material Transaction is (i) any transaction with or involving a Related Party (x) with an individual value equal to or greater than ten million U.S. dollars or (y) with an individual value lower than ten million U.S. dollars, when the aggregate sum of any series of transactions reflected in the financial statements of the four fiscal quarters of the Company preceding the date of determination (excluding any transactions that were reviewed and approved by any of the audit committee of the Company, or any of its subsidiaries, the board of directors of the Company, the independent members of the board of directors or other governing body of any subsidiary of the Company, or a majority of the members of the board of directors or similar governing body of any subsidiary of the Company that were not nominated by or at the request of the Company or any entity that directly or indirectly controls or is under common control with the Company) exceeds 1.5% of the Company’s consolidated net sales made in the fiscal year preceding the year on

 

90


Table of Contents
 

which the determination is made; or (ii) any corporate reorganization transaction (including a merger, spin-off or bulk transfer of a business) involving the Company or any of its direct or indirect subsidiaries for the benefit of or involving a Related Party; and

 

   

a Related Party is, in relation to the Company or its direct or indirect subsidiaries, any of the following persons: (i) a member of the board of directors of the Company or of the board of directors or other governing body of any of the Company’s subsidiaries; (ii) any member of the board of directors or other governing body of an entity that directly or indirectly controls the Company; (iii) any entity that directly or indirectly controls or is under common control with the Company (other than the Company’s subsidiaries); (iv) any entity controlled directly or indirectly by any member of the board of directors of the Company, or of the board of directors or other governing body of any subsidiary of the Company; and (v) any spouses, parents, siblings or relatives up to the third degree of, and any person that shares a home with, any person referred to in (i) or (ii).

The audit committee has the power (to the maximum extent permitted by applicable laws) to request that the Company or relevant Subsidiary provide any information necessary for it to review any Material Transaction. A Related Party transaction shall not be entered into unless (i) the circumstances underlying the proposed transaction justify that it be entered into before it can be reviewed by the Company’s audit committee or approved by the board of directors and (ii) the Related Party agrees to unwind the transaction if the Company’s audit committee or board of directors does not approve it.

The audit committee has the authority to conduct any investigation appropriate to fulfilling its responsibilities, and has direct access to the Company’s internal and external auditors as well as Ternium’s management and employees and, subject to applicable laws, its subsidiaries.

D. Employees

The following table shows the number of persons employed by Ternium and its consolidated subsidiaries:

 

     At
December 31,
2006
 

Argentina

   5,072  

Venezuela

   5,660  

Mexico

   7,469  

Other

   70  
      

Total employees

   18,271 (1)
      

(1) It does not include 3,983 outsourced employees. We expect that during 2007 some outsourced personnel will be incorporated in Ternium as direct employees.

At December 31, 2006, number of persons employed by Ternium was 18,271. During 2006, previously outsourced personnel became direct employees of Ternium, while the aggregate number of employees decreased compared to 2005.

Argentina

Most of Siderar’s employees are members of the Unión Obrera Metalúrgica de la República Argentina (“UOM”), the union of employees related to the steel industry. Employees are covered by a collective agreement that includes all workers in Argentina in the steel and metalmechanic industry. The employees are also covered by certain complementary collective agreements signed between Siderar and UOM that define specific issues related to any plant in particular or Siderar as a whole, such as working structures, salary levels related to performance, productivity, production quantity and quality and the results of Siderar. These agreements are subject to periodic modification according to changing circumstances and are updated in relation to competitiveness, quality, security and efficiency goals.

 

91


Table of Contents

As part of the privatization process in 1992, 20% of Siderar’s shares were sold to former employees of state-owned Somisa under the Programa de Propiedad Participada (the “Employee Stock Ownership Plan”). For further information see Item 4. “Information on the Company—C. Organizational Structure—Subsidiaries—Siderar”.

Many foremen of Siderar are affiliated with the Asociación de Supervisores de Industria Metalmecánica de la República Argentina (“ASIMRA”), the union of supervisors of different activities in the metal manufacturing industry. ASIMRA-affiliated employees are subject to an agreement signed with Siderar that establishes regulations relating to salaries, working organization, absences, vacations, benefits and labor relations. We believe that Siderar maintains good relations with its unions, and the measures that it has taken in order to make Siderar more competitive have not resulted in significant labor unrest.

Basic salaries remained stable during the 1989-2001 period when Argentina had its Convertibility Law. The peso devaluation produced a significant reduction in salary values in U.S. dollar terms. Since then, salaries in nominal terms have slowly increased, mainly due to a revaluation of the peso against the U.S. dollar and increases in salaries resulting from private agreements and government regulation.

Under Argentine law, Siderar is required to contribute up to 23% of its employees’ base salaries to various national and privately-run health, pension and retirement plans. Siderar must also withhold an additional percentage from salaries for contribution to such funds. The amount to be withheld for the pension fund has varied according to emergency measures imposed by the government to cope with the Argentine crisis of 2002. As of December 2004, the withholding percentage was 13% for those employees affiliated with the privately-run pension funds and 17% for those affiliated with the public plan. During 2006, the latter percentage increased to 16.3%. Furthermore, as of 2003, there was a maximum of ARP4,800 over which Siderar must contribute and withhold the percentage for the pension fund. From this year, this maximum was progressively increased for the employer’s contributions for the middle and superior personnel and finally completely eliminated in 2005.

Under Argentine law, in order to terminate an employee without cause, Siderar must indemnify the employee based on the employee monthly salary per each year of employment. For the UOM unionized employees (as agreed with the union) the maximum monthly salary is ARP3,681 while for the ASIMRA unionized employees is ARP8,916. However, for the non-unionized employees the maximum compensation prescribed by law is higher and variable. Since January 2002, the Argentine government established an emergency regime under which employees that are terminated without cause are entitled to an extra 50% over the legally required indemnification amount. In addition to its legal obligations, in 1995 Siderar established a benefit program for its senior management that is applied in certain cases of employment termination.

Venezuela

In Venezuela, approximately two-thirds of Sidor’s employees are organized in the Sindicato Único de Trabajadores de la Industria Siderúrgica y sus Similares del Estado Bolívar (Sole Union of Steel and Related Industry Workers of Bolivar State or “SUTISS”). Sidor has from time to time suffered labor disruptions. Social conflicts in Venezuela and in particular conflicts with SUTISS have affected Sidor’s results during recent years. The main labor-related incidents were the Civic National Strike initiated in December 2002 that lasted 63 days and that heavily impacted natural gas provision due to the stoppage by PDVSA; and the general strikes initiated by SUTISS lasting 21 days in October 2003 and 20 days in 2004. During 2005, there were no important labor disruptions. In 2006, a claim related to the interpretation of the modifications of the regulation of the labor law was interposed, resulting in an illegal strike that heavily impacted the Sidor’s operation due to the 9 days full stoppage.

In October 2004, a collective bargaining agreement was reached with the union which terminated in February 2007. As of the date of this annual report, Sidor is negotiating a new collective bargaining agreement with the union. See Item 3. “Key Information—D. Risk Factors—Risks Relating to our Business—Labor disputes at Ternium’s operating subsidiaries could result in work stoppages and disruptions to Ternium’s operations.” Although Ternium has reached this agreement with SUTISS, Ternium may suffer additional plant stoppages or strikes as a result of future work force reductions in connection with its productivity improvement and cost reduction plans. No assurance can be given that any future stoppage or strikes would not have a material adverse effect on Ternium’s financial condition, cash flows and results of operations.

 

92


Table of Contents

Sidor established a labor participation program (“Programa de Participación Laboral” or “PPL”) in 1997, under which current and retired workers of Sidor were entitled to receive 20% of the Sidor’s shares. From May 2004 to date, BANDES and CVG transferred 6,335,648 Class “B” shares, representing 19.9% of Sidor’s share capital to employees and eligible former employees pursuant to the terms of the PPL. The remaining 29,694 shares are also expected to be transferred to the PPL.

Under Venezuelan law, Ternium employees who are laid-off are entitled to the following benefits:

 

   

indemnification for seniority of up to 150 days’ salary;

 

   

severance pay for seniority that ranges from two to five days’ salary for every month of seniority accumulated after June 1997, up to a maximum amount equivalent to 90 days’ salary;

 

   

payment of unused vacation days during the year preceding the employee’s termination and a proportional allocation in the year in which the employee is terminated; and

 

   

compensation/profit sharing equivalent to four months’ salary (this benefit is also accrued annually for the services provided). In some specified situations, like death, accident, work-related disease or retirement under the pension plan of the company, employees who had been covered by the collective bargaining agreement with SUTISS are entitled to additional indemnification equal to indemnification for seniority of up to 150 days’ salary, whereas employees not covered by the collective bargaining agreement are entitled to additional indemnification ranging from 50% to 100% of the amount of such additional indemnification.

Mexico

In Mexico, approximately two-thirds of Ternium employees are unionized, and the rest are not. The majority of its unionized workers in Mexico are members of FENASA (“Federación Nacional de Asociaciones Sindicales Autónomas”), the national federation of independent union associations. The unionized employees of Peña Colorada, however, are members of Sindicato de Trabajadores Mineros, Metalúrgicos y Similares de la República Mexicana. The applicable collective bargaining agreements are negotiated every two years and salary adjustments are made on an annual basis. Despite some minor social and union problems, Ternium’s subsidiary Hylsamex maintains good relations with its labor force in Mexico and has never experienced a strike or work stoppage.

Under Mexican law, Ternium’s Mexican subsidiaries are required to pay their employees an annual benefit of approximately 10% of pre-tax income, calculated using a methodology similar to the methodology used for the calculation of the income tax.

E. Share Ownership

To our knowledge, the total number of the Company’s shares (in the form of ordinary shares or ADSs) owned by our directors and executive officers as of April 30, 2007 was 693,900, which represents 0.03% of our outstanding shares. The following table provides information regarding share ownership by our officers and directors.

 

Director or Officer

   Number of Shares Held

Adrián Lajous

   42,000

Daniel Novegil

   503,000

Roberto Philipps

   74,600

Martín Berardi

   60,000

Alfredo Indaco

   14,300
    

Total

   693,900
    

 

93


Table of Contents
Item 7. Major Shareholders and Related Party Transactions

A. Major Shareholders

The following table shows the beneficial ownership of our shares, as of March 30, 2007, by (1) our principal shareholders (persons or entities that own beneficially 5% or more of the Company’s shares), (2) our directors and executive officers as a group and (3) non-affiliated public shareholders.

 

Identity of Person or Group

   Number    Percent  

San Faustín, ISL, I.I.I. CI(1)

   1,184,069,232    59.06 %

Tenaris(2)

   229,713,194    11.46 %

Usiminas(3)

   285,731,726    14.25 %

Directors and executive officers as a group

   693,900    0.03 %

Public

   304,535,390    15.19 %
           

(1) ISL is controlled by I.I.I. CI, which is controlled by San Faustín and holds 959,482,775 shares of the Company. In addition, San Faustín, which is ultimately controlled by Rocca & Partners, owns 224,586,457 shares of the Company through I.I.I. C.I.
(2) Tenaris is controlled by I.I.I. CI, which is controlled by San Faustín and ultimately by Rocca & Partners.
(3) Usiminas holds its shares through a wholly-owned subsidiary.

As of May 31, 2007, 30,300,511 ADSs (representing 303,005,110 shares of common stock, or 15.11% of all outstanding shares of common stock of the Company) were registered in the name of 106 holders resident in the United States.

The voting rights of our principal shareholders do not differ from the voting rights of other shareholders. None of our directors or officers is a legal or beneficial owner of any of our shares. We are not aware of any arrangement which may at a later date result in a change of control of the Company.

B. Related Party Transactions

Ternium is party to several related party transactions as described below. These related party transactions are subject to the review of the audit committee of the Company’s board of directors and the requirements of Luxembourg law. For further detail on the approval process for related party transactions, see Item 6. “Directors, Senior Management and Employees—A. Directors and Senior Management—Director Liability” and “C. Board Practices—Audit Committee”.

Amazonia (Sidor’s controlling shareholder) and Hylsamex became subsidiaries of the Company on February 15, 2005, and August 22, 2005, respectively, and consolidation of their results began on those dates. Accordingly, transactions between Sidor or Hylsamex for the year 2005, as applicable, with related parties are only shown as related-party transactions for the Company to the extent attributable to periods beginning on or after the respective consolidation dates.

Purchases of Raw Materials

In the ordinary course of business, Ternium buys raw materials and other production inputs from the subsidiaries of Tenaris. These purchases are made on similar terms and conditions to those purchases made by the Ternium companies from unrelated third parties. These transactions include:

 

   

purchase of ferrous scrap and other raw material, which amounted to USD19.2 million in 2006 and USD9.7 million in 2005 (during the period beginning on January 1, 2005 and ending on February 14, 2005 the additional purchases amounted to USD0.1 million).

 

94


Table of Contents
   

purchase of steam and operational services from the Argentine electric power generating facility of Tenaris for Siderar in San Nicolás. These purchases amounted to USD6.4 million in 2006 and USD2.6 million in 2005. In addition, Siderar recorded an income of USD6.1 million in 2005 due to a penalty charge paid by a subsidiary of Tenaris for the failure to deliver contractual volumes of steam.

Sales of Steel Products and Raw Materials

In the ordinary course of business, Ternium sells flat steel products, steel bars and raw materials to the subsidiaries of Tenaris. These transactions include:

 

   

Sales of flat steel products to be used in the production of welded pipes and accessories, which amounted to USD35.9 million in 2006 and USD29.2 million in 2005.

 

   

Sales of steel bars to be used in the seamless pipe operation of the subsidiaries of Tenaris in Venezuela, which amounted to USD30.5 million in 2006 and USD31.8 million in 2005 (during the period beginning on January 1, 2005 and ending on February 14, 2005 the complementary sales amounted to USD4.9 million)

 

   

Sales of pig iron, DRI and scrap to be used in the production of seamless pipes, which amounted to USD23.7 million in 2006 and USD11.7 million in 2005.

In certain circumstances, Ternium sells steel products to other companies in the Techint Group. These sales amounted to USD0.6 million in 2006 and USD0.2 million in 2005.

All these sales are made on similar terms and conditions to those sales made by Ternium to unrelated third parties.

Transactions involving Matesi

Sidor established Matesi jointly with a subsidiary of Tenaris to operate an HBI production facility in Venezuela. Sidor holds 49.8% of Matesi and the subsidiary of Tenaris holds 50.2%. Transactions associated with this operation include:

 

   

purchases of HBI (Hot Briquette Iron) pursuant to an off-take agreement, which amounted to USD77.3 million in 2006 and USD79.0 million in 2005 (during the period beginning on January 1, 2005 and ending on February 14, 2005 the additional purchases amounted to USD8.1 million). The agreement establishes that Matesi is required to sell to Sidor, on a take-or-pay basis, 29.9% of Matesi’s HBI production, or up to 49.8% at the election of Sidor.

 

   

Sidor entered into a Management Assistance Agreement with Matesi. As part of this agreement, Matesi paid fees to Sidor amounting USD1.1 million in 2006 and USD1.2 million in 2005, related to the provision of managerial services (during the period beginning on January 1, 2005 and ending on February 14, 2005 the complementary fees amounted to USD0.1 million). Additionally, Sidor purchased goods and services on behalf of Matesi for an amount of USD15.1 million in 2005 (during the period beginning on January 1, 2005 and ending on February 14, 2005 the complementary transactions amounted to USD1.1 million).

 

   

as part of the investment agreement to finance the acquisition of Matesi’s assets and its start-up, in July, 2004 Sidor granted a loan to Matesi for an outstanding amount at December 31, 2006 of USD58.4 million. This loan bears interest at a rate of LIBOR plus 2%. Interest earned on this loan amounted to USD3.6 million in 2006 and USD2.9 million in 2005 (during the period beginning on January 1, 2005 and ending on February 14, 2005 the additional interest amounted to USD0.4 million).

 

   

Hylsa earned royalties and technical assistance fees in respect of licensed technology to Matesi. These royalties and fees amounted to USD1.6 million in 2006 and USD1.6 million in 2005.

 

95


Table of Contents
   

during 2006, Sidor entered into a Service Agreement with Matesi under which Sidor recycles by-products form Matesi’s operations into raw materials. During 2006, Sidor provided services to Matesi for an amount of USD1.5 million.

Purchase Agency Services

Until September 2006, Ternium entered into agreements with Exiros, a subsidiary of Tenaris, to act as purchase agent. In October 2006, Ternium and Tenaris entered into a joint venture through which each of them hold 50% of Exiros, and continue acting as purchase agent. This acquisition amounted to USD2.3 million. Ternium paid fees amounting to USD11.5 million in 2006 and USD4.8 million in 2005.

Supply of Natural Gas

Siderar is party to contracts with Tecpetrol, TGN, Litoral Gas and Energy Consulting Services relating to the supply of natural gas to Siderar’s operations. Tecpetrol is a Techint group company engaged in oil and gas exploration and production and has rights to various oil and gas fields in Argentina and elsewhere in Latin America. TGN operates two major pipelines in Argentina connecting the major gas basins of Neuquén and Noroeste-Bolivia to the major consumption centers in Argentina. Litoral Gas is a company that distributes gas in the Province of Santa Fé and in the northeastern section of the Province of Buenos Aires. Energy Consulting Services is a company engaged in energy and management consulting, representing one of the major and most reliable natural gas traders in Argentina. The Techint group holds significant but non-controlling interests in TGN, Litoral Gas and Energy Consulting Services.

In March 2003, Siderar entered into an agreement with Tecpetrol under which Siderar paid USD17.3 million for the purchase of a total 725 million cubic meters of natural gas to be delivered to Siderar’s facilities over a period of five years. Under this agreement, the prices are equivalent or more competitive than those charged by Repsol YPF (Siderar’s principal gas supplier) to Siderar. Tecpetrol’s sales to Ternium amounted to USD8.9 million in 2006 and USD7.4 million in 2005.

TGN charges Siderar a price to transport its natural gas supplies that is equivalent on a comparable basis to prices paid by other industrial users. The Argentine government regulates the general framework under which TGN operates and prices its services. TGN’s sales to Ternium amounted to USD4.0 million in 2006 and USD2.4 million in 2005.

Litoral Gas’ and Energy Consulting Services provide Siderar with natural gas. Litoral Gas’ sales to Ternium totaled USD0.7 million in 2006 and USD0.9 million in 2005, while Energy Consulting Services’ sales amounted to USD1.4 million in 2006 and USD1.5 million in 2005.

Provision of Engineering and Labor Services

Ternium contracts with certain Techint group companies engineering, construction, specialized labor and supervision services for civil and electromechanical works and non-specialist manual labor services, such as cleaning, general maintenance and handling of by-products. These services can usually be provided by other Techint group companies at more competitive prices than if Ternium performed them and are contracted out at market rates. Fees accrued for these services amounted to USD135.9 million in 2006 and USD63.8 million in 2005 (during the period beginning on January 1, 2005 and ending on February 14, 2005 Sidor paid additional fees amounting USD0.4 million).

Sales and Purchases of Other Products and Services

Ternium entered into other transactions with Techint group companies, the most important ones including:

 

96


Table of Contents
   

payment of commissions to Techintrade Corp. owing to commercial agency services, which amounted to USD10.2 million in 2005. On May 17, 2005 this contract was transferred to a full owned subsidiary of Ternium.

 

   

purchase of plant equipment and spare parts to Techint Compagnia Tecnica Internazionale and other related companies, which amounted to USD19.8 million in 2006 and USD9.5 million in 2005 (during the period beginning on January 1, 2005 and ending on February 14, 2005 Sidor additional purchases amounted to USD8.2 million).

 

   

purchases of steel products from Tenaris’s subsidiaries, which amounted to USD3.3 million in 2006 and USD2.4 million in 2005.

 

   

in July 2006, Siderar entered into a contract with Information Systemas & Technologies, a subsidiary of Tenaris, for the provision of technology and information services. Fees paid under this contract amounted to USD1.6 million.

 

   

in late 2005, Hylsamex transferred to Techint Compagnia Tecnica Internazionale the rights to market and license the HYL technology to unaffiliated third parties for royalty fees.

Financial Operations and Administrative Services

In order to finance the acquisition of Hylsamex, Ternium entered into Subordinated Convertible Loans with related parties. Interest paid amounted to USD1.8 million in 2006 and USD9.7 million in 2005. For a description of these loans, see Item 5. “Operating and Financial Review and Prospects—B. Liquidity and Capital Resources—Principal Sources of Funding—Financial Liabilities”.

Finma S.A., a company owned by various Techint group companies, provides administrative and legal support services to Techint group companies, including Siderar and Sidor. In August 2006, Finma was reorganized and Ternium acquired 33.33% of its share capital. Fees accrued under this agreement amounted to USD4.0 million in 2006 and USD3.5 million in 2005 (during the period beginning on January 1, 2005 and ending on February 14, 2005 Sidor paid additional fees amounting USD0.1 million).

Other Transactions

In the ordinary course of business, from time to time, Ternium carries out other transactions and enter into other arrangements with Techint group companies, none of which are believed to be material.

C. Interest of Experts and Counsel

Not applicable.

 

Item 8. Financial Information

A. Consolidated Statements and Other Financial Information

See Item 18 and pages F-1 through F-51 for our audited consolidated financial statements.

Legal Proceedings

Ternium is involved in litigation arising from time to time in the ordinary course of business. Based on management’s assessment and the advice of legal counsel, it is not anticipated that the ultimate resolution of existing litigation will result in amounts in excess of recorded provisions that would be material to Ternium’s consolidated financial position or results of operations.

 

97


Table of Contents

In June 2004, the arbitration proceedings brought by Sidor against PDVSA Gas, C.A. (on the basis that PDVSA Gas had charged Sidor higher than agreed-upon prices in its supplies of gas against the application of the most favored client clause) were resolved in Sidor’s favor. Accordingly, in its financial statements at December 31, 2004, Sidor reversed the USD41.4 million provision it had recorded at December 31, 2003. In July 2004, PDVSA Gas, C.A. filed an appeal with the Venezuelan courts seeking to void an arbitral award. Sidor believes that applicable Venezuelan law does not allow the courts to void this arbitral award under the circumstances and that the likelihood of loss thereunder is remote. Accordingly, Sidor did not record any liabilities in connection with the appeal. At December 31, 2006, Sidor’s potential exposure under this litigation amounted to USD125.7 million. As a consequence of the commercial transactions entered into by Sidor and PDVSA Gas during the three-month period ended March 31, 2007, Sidor’s potential exposure under this litigation increased by USD9.0 million, thus reaching a total amount of USD134.7 million.

Sidor recorded a provision for a total amount of USD26.3 million in connection with tax matters arising from compensations of tax credits made by the Company since the implementation of the V.A.T. law in June 1999. The SENIAT, the Venezuelan tax and customs authority, is claiming the interest accrued on the application of those tax credits as payment on account of tax obligations.

The Argentine tax authority, the Administración Federal de Ingresos Públicos (the “AFIP”), has challenged the income tax treatment of certain disbursements that Siderar has treated as expenses necessary to maintain industrial installations, which as such should be deducted in the year in which they take place. The AFIP considered the treatment given by Siderar to these expenses asserted that they should be treated as investments or improvements that must be capitalized and, therefore, the AFIP made a reassessment of income tax due on a nominal tax basis plus fines and interest in fiscal years 1995 to 1999 amounting to approximately USD20.4 million.

Siderar appealed these assessments before the Argentine Tax Court. On April 13, 2005, Siderar was notified of a ruling issued by the Argentine Tax Court reducing the assessments made by the AFIP for fiscal years 1995 and 1996 by USD13.9 million and instructing that the taxes be recalculated in accordance with this ruling. Siderar recorded a provision amounting to USD4.6 million as of December 31, 2006, as management of the Company considers there is a probable outflow of benefits. The ruling issued by the Argentine Tax Court regarding fiscal years 1995 and 1996 has been appealed by both AFIP and Siderar, but Siderar is required to pay the amounts (capital and interests) due to the AFIP, pursuant to this ruling (once the recalculation ordered by the Argentine Tax Court has been approved by said Tribunal) even if, at that time, Siderar’s appeal has not been resolved.

Dividend Policy

We do not have, and have no current plans to establish, a formal dividend policy governing the amount and payment of dividends or other distributions. The amount and payment of dividends will be determined by a simple majority vote at a general shareholders’ meeting, typically, but not necessarily, based on the recommendation of our board of directors. All shares of our capital stock rank pari passu with respect to the payment of dividends.

 

98


Table of Contents

On June 6, 2007, the Company’s shareholders approved a dividend of USD0.05 per share (USD0.50 per ADS), or approximately USD100 million. The Company paid the dividend on June 12, 2007. This is the first dividend distribution made by the Company since its formation.

We will conduct all of our operations through subsidiaries and, accordingly, our main source of cash to pay dividends will be the dividends received from our subsidiaries. See Item 3. “Key Information—D. Risk Factors—Risks Relating to the Structure of the Company—As a holding company, our ability to pay dividends and obtain financing depends on the results of operations and financial condition of our subsidiaries and could be restricted by legal, contractual or other limitations.” These dividend payments will likely depend on our subsidiaries’ results of operations, financial condition, cash and capital requirements, future growth prospects and other factors deemed relevant by their respective boards of directors, as well as on any applicable legal restrictions. See Item 3. “Key Information—D. Risk Factors—Risks Relating to the Countries in Which We Operate—Argentina” and—Venezuela” and Item 10. “Additional Information—B. Memorandum and Articles of Association—Dividends” for a discussion of the current Argentine and Venezuelan restrictions on the payment of dividends.

Pursuant to our articles of association, the board of directors has the power to distribute interim dividends in accordance with applicable Luxembourg law, but dividend payments must be approved by our shareholders at the annual general meeting, subject to the approval of our annual accounts. Dividends may be lawfully declared and paid if our net profits and distributable reserves are sufficient under Luxembourg law.

Under Luxembourg law, at least 5% of our net profits per year must be allocated to the creation of a legal reserve until such reserve has reached an amount equal to 10% of our issued share capital. If the legal reserve later falls below the 10% threshold, at least 5% of net profits again must be allocated toward the reserve. The legal reserve is not available for distribution.

B. Significant Changes

Except as otherwise disclosed in this annual report, there has been no undisclosed significant change since the date of the annual financial statements.

 

Item 9. The Offer and Listing

A. Offer and Listing Details

The Company’s ADSs are listed on the NYSE under the symbol “TX.” Trading on the NYSE began on February 1, 2006. As of March 30, 2007, a total of 2,004,743,442 shares were registered in the Company’s shareholder register.

As of May 31, 2007, a total of 303,005,110 shares were registered in the name of the depositary for the Company’s ADR program. On June 28, 2007, the closing sales price for the Company’s ADSs on the NYSE was USD30.38.

New York Stock Exchange

As of May 31, 2007, a total of 30,300,511 ADSs were registered of record. Each ADS represents 10 shares of the Company’s stock. The Bank of New York acts as the Company’s depositary for issuing ADRs evidencing the ADSs. Fluctuations between the Argentine peso and the U.S. dollar will affect the U.S. dollar equivalent of the price of the ADSs on the NYSE. The following table sets forth, for the periods indicated, the high and low quoted prices for the Company’s shares, in the form of ADSs, traded on the NYSE.

 

99


Table of Contents
     Price per ADS
2006    High    Low

First quarter

   30.00    20.00

Second quarter

   29.00    19.91

Third quarter

   26.00    21.07

Fourth quarter

   30.50    21.40
Last Six Months    High    Low

January 2007

   29.50    23.00

February 2007

   30.74    25.25

March 2007

   28.89    24.52

April 2007

   30.00    26.00

May 2007

   27.69    25.28

June 2007 (through June 28, 2007)

   30.90    30.09

B. Plan of Distribution

Not applicable.

C. Markets

See “—Offer and Listing Details”.

D. Selling Shareholders

Not applicable.

E. Dilution

Not applicable.

F. Expenses of the Issue

Not applicable.

 

Item 10. Additional Information

A. Share Capital

Not applicable.

B. Memorandum and Articles of Association

General

The following is a summary of certain rights of holders of our shares. These rights are set out in our articles of association or are provided by applicable Luxembourg law, and may differ from those typically provided to shareholders of U.S. companies under the corporation laws of some states of the United States of America. This summary is not exhaustive and does not contain all information that may be important to you. For more complete information, you should read our articles of association, which are attached as an exhibit to this annual report.

The Company is a joint stock corporation (société anonyme holding) organized under the laws of Luxembourg. Its object and purpose, as set forth in Article 2 of its articles of association, is the taking of interests, in any form, in corporations or other business entities, and the administration, management, control and development thereof. The Company is registered under the number B98 668 in the Registre du Commerce et des Sociétés.

 

100


Table of Contents

We have an authorized share capital of a single class of 3.5 billion shares having a nominal value of USD1.00 per share. There were 2,004,743,442 shares issued as of May 31, 2007. All issued shares are fully paid.

Our articles of association currently authorize our board of directors, for a period commencing on June 17, 2005 and ending on October 26, 2010, to issue shares within the limits of our authorized share capital at such times and on such terms and conditions as the board of directors or its delegates may determine. Accordingly, until October 26, 2010, shares may be issued up to the authorized share capital limit of USD3.5 billion by a decision of the board of directors.

Our shareholders have authorized the board of directors to waive, suppress or limit any pre-emptive subscription rights of shareholders provided for by law to the extent it deems such waiver, suppression or limitation advisable for any issue or issues of shares within the authorized share capital. However, if and from the date our shares are listed on a regulated market (and only for as long as they are so listed), any issuance of shares for cash within the limits of the authorized share capital shall be subject to the pre-emptive subscription rights of the then existing shareholders (as set out in the articles of association), except in the following cases (in which cases no pre-emptive rights shall apply):

 

  (a) any issuance of shares for, within, in conjunction with or related to, an initial public offering of our shares on one or more regulated markets (in one or more instances);

 

  (b) any issuance of shares against a contribution other than in cash;

 

  (c) any issuance of shares upon conversion of convertible bonds or other instruments convertible into our shares; provided, however, that the pre-emptive subscription rights of the then existing shareholders shall apply by provision of our articles of association in connection with any issuance of convertible bonds or other instruments convertible into our shares for cash; and

 

  (d) any issuance of shares (including by way of free shares or at a discount), up to an amount of 1.5% of the issued share capital of the Company, to our directors, officers, agents or employees, to the directors, officers, agents or employees of our direct or indirect subsidiaries or of our affiliates, including without limitation the direct issue of shares upon the exercise of options, rights convertible into shares, or similar instruments convertible or exchangeable into shares issued for the purpose of, or in relation to, compensation or incentive of any such persons.

Our authorized share capital is fixed by our articles of association, as amended from time to time, with the approval of shareholders at an extraordinary general shareholders’ meeting.

Dividends

Subject to applicable law, all shares (including shares underlying ADSs) are entitled to participate equally in dividends when, as and if declared by the shareholders at the ordinary general shareholders’ meeting out of funds legally available for such purposes. Under Luxembourg law, claims for dividends will lapse five years after the date such dividends are declared. However, we may elect to pay a declared dividend after such period. The shareholders may, at the ordinary general shareholders’ meeting, which every shareholder has the right to attend in person or by proxy, declare a dividend under Article 21 of our articles of association.

Under Article 21 of the articles of association, our board of directors has the power to distribute interim dividends in accordance with the conditions that apply to commercial companies set forth in particular in Section 72-2 of the Luxembourg law of August 10, 1915 on commercial companies.

Voting Rights; Shareholders’ Meetings; Election of Directors

Each share (including shares underlying ADSs) entitles the holder to one vote at the Company’s general shareholders’ meetings. Shareholder action by written consent is not permitted, but proxy voting is permitted. Notices of general shareholders’ meetings are governed by the provisions of Luxembourg law and the Company’s

 

101


Table of Contents

articles of association. Notices of such meetings must be published twice, at least at eight-day intervals, the second notice appearing at least eight days prior to the meeting, in the Luxembourg Official Gazette and in a leading newspaper having general circulation in Luxembourg. If an extraordinary general shareholders’ meeting is adjourned for lack of a quorum, notices must be published twice, in the Luxembourg Official Gazette and two Luxembourg newspapers, at 15-day intervals, the second notice appearing at least 15 days prior to the meeting. In case our shares are listed on a foreign regulated market, notices of general shareholders’ meetings shall also be published in accordance with the publicity requirements of such regulated market. At an ordinary general shareholders’ meeting, there is no quorum requirement, and resolutions are adopted by a simple majority vote of the shares present or represented and voted. An extraordinary general shareholders’ meeting must have a quorum of at least 50% of the issued and outstanding shares. If a quorum is not reached, such meeting may be reconvened at a later date with no quorum requirements by means of the appropriate notification procedures provided for by Luxembourg company law. In both cases, Luxembourg company law and the Company’s articles of association require that any resolution of an extraordinary general shareholders’ meeting be adopted by a two-thirds majority vote of the shares present or represented. If a proposed resolution consists of changing the Company’s nationality or of increasing the shareholders’ commitments, the unanimous consent of all shareholders is required. Directors are elected at an ordinary meeting. Cumulative voting is not permitted. As our articles of association do not provide for staggered terms, directors are elected for a maximum of one year and may be reappointed or removed at any time, with or without cause, by a majority vote of the shares present or represented and voted.

Our annual ordinary general shareholders’ meeting is held at 2:30 P.M., Luxembourg time, on the first Wednesday of June of each year at the place indicated in the notices of meeting. If that day is a legal or banking holiday in Luxembourg, the meeting shall be held on the following business day.

Any shareholder who holds one or more of our shares on the fifth calendar day preceding the general shareholders’ meeting (the “Record Date”) shall be admitted to a general shareholders’ meeting. Those shareholders who have sold their shares between the Record Date and the date of the general shareholders’ meeting, may not attend or be represented at the meeting.

In the case of shares held through fungible securities accounts, each shareholder may exercise all rights attached to his shares and, in particular, may participate in and vote at shareholders’ meetings of the Company upon presentation of a certificate issued by the financial institution or professional depositary holding the shares, evidencing such deposit and certifying the number of shares recorded in the relevant account on the Record Date. Such certificate must be filed at least five days before the meeting with the Company at its registered address or at the address stated in the convening notice or, in case the shares of the Company are listed on a regulated market, with an agent of the Company located in the country of the listing and designated in the convening notice. In the event that the shareholder votes by proxy, he shall file the required certificate and a completed proxy form within the same period of time at the registered office of the Company or with any local agent of the Company duly authorized to receive such proxies.

The board of directors and the shareholders’ meeting may, if they deem so advisable, reduce these periods of time for all shareholders and admit all shareholders (or their proxies) who have filed the appropriate documents to the general shareholders’ meeting, irrespective of these time limits.

Access to Corporate Records

Luxembourg law and our articles of association do not generally provide for shareholder access to corporate records. Shareholders may inspect the annual accounts and auditors’ reports at our registered office during the fifteen-day period prior to a general shareholders’ meeting.

Appraisal Rights

In the event the shareholders approve any of the following:

 

   

the delisting of our shares from all regulated markets where our shares are listed at that time, excluding a delisting made pursuant to an offer to all of our shareholders made by a business entity subject to

 

102


Table of Contents
 

common control with us, whereby such business entity offers to issue, in exchange for our shares, shares to be listed on the same regulated market(s) on which our shares are listed;

 

   

a merger in which we are not the surviving entity (unless the shares or other equity securities of such entity are listed on the New York or London stock exchanges);

 

   

a sale, lease, exchange or other disposition of all or substantially all of our assets;

 

   

an amendment to our articles of association that has the effect of materially changing our corporate purpose;

 

   

the relocation of our domicile outside the Grand Duchy of Luxembourg; or

 

   

amendments to our articles of association that restrict the rights of our shareholders (excluding any amendments in relation with, or to, the authorized share capital and/or the waiver or suppression of any preferential subscription rights relating thereto);

dissenting or absent shareholders have the right to have their shares repurchased by the Company at (i) the average market value of the shares over the 90 calendar days preceding the applicable general shareholders’ meeting or (ii) in the event that our shares are not traded on any regulated market, the amount that results from applying the proportion of our equity that the shares being sold represent over our net worth as determined in our last consolidated financial statements approved by the shareholders or in our last interim consolidated financial statements approved by the board of directors, whichever is more recent. Shareholders who voted in favor of the relevant resolution are not entitled to exercise this right.

Dissenting or absent shareholders must present their claim within one month following the date of the applicable general shareholders’ meeting and supply the Company with evidence of their shareholding at the time of such meeting. We must (to the extent permitted by applicable laws and regulations and in compliance therewith) repurchase our shares within six months following the date of the applicable general shareholders’ meeting. If delisting from one or more, but not all, of the regulated markets where our shares are listed is approved by the shareholders, only dissenting or absent shareholders with shares held through participants in the local clearing system for that market or those markets can exercise this appraisal right if:

 

   

they held the shares as of the date of the announcement by us of our intention to delist or as of the date of publication of the first convening notice for the general shareholders’ meeting that approved the delisting;

 

   

they present their claim within one month following the date of the general shareholders’ meeting and supply evidence of their shareholding as of the date of the Company’s announcement or the publication of the first convening notice to the meeting; and

 

   

the delisting is not being made pursuant to an offer to all of our shareholders made by a business entity subject to common control with us, whereby such business entity offers to issue, in exchange for our shares, shares to be listed on the same regulated market(s) on which such dissenting or absent shareholders hold their shares through participants in the local clearing system for that market or markets.

In the event a shareholder exercises its appraisal right, applicable Luxembourg law provisions shall apply.

Distribution of Assets on Winding-up

In the event of our liquidation, dissolution or winding-up, the net assets remaining after allowing for the payment of all debts, charges and expenses shall be paid out to holders of our shares in proportion to their respective holdings.

 

103


Table of Contents

Transferability and Form

Our articles of association do not impose restrictions on the transfer of our shares. The shares are issuable in registered form.

Pursuant to our articles of association, the ownership of registered shares is evidenced by the inscription of the name of the shareholder, the number of shares held by him and the amount paid on each share in our shareholders’ register. In addition, our articles of association provide that our shares may be held through fungible securities accounts with financial institutions or other professional depositaries. Shares held through fungible securities accounts have the same rights and obligations as shares recorded in our shareholders’ register.

Shares held through fungible securities accounts may be transferred in accordance with customary procedures for the transfer of securities in book-entry form. Shares that are not held through fungible securities accounts may be transferred by a written statement of transfer signed by both the transferor and the transferee or their respective duly appointed attorney-in-fact and recorded in our shareholders’ register. The transfer of shares may also be made in accordance with the provisions of Article 1690 of the Luxembourg Civil Code. As evidence of the transfer of registered shares, we may also accept any correspondence or other documents evidencing the agreement between transferor and transferee as to the transfer of registered shares.

Fortis Banque Luxembourg S.A. maintains our shareholders’ register.

Limitation on Securities Ownership

There are no limitations currently imposed by Luxembourg law or the articles of association on the rights of non-resident shareholders to hold or vote our shares.

Change in Control

Our articles of association do not contain any provision that would have the effect of delaying, deferring or preventing a change in control of the Company and that would operate only with respect to a merger, acquisition or corporate restructuring involving the Company. In addition, the Company does not know of any significant agreements or other arrangements to which the Company is a party and which take effect, alter or terminate in the event of a change of control of the Company.

There are no rights associated with the Company’s shares other than those described above.

C. Material Contracts

For a summary of any material contract entered into by us outside of the ordinary course of business during the last two years, see Item 4. “Information on the Company—Raw Materials and Energy”.

D. Exchange Controls

Many of the countries which are important markets for us or in which we have substantial assets have a history of substantial government intervention in currency markets, volatile exchange rates and government-imposed currency controls. These include Argentina, Mexico and Venezuela. Currently, only Venezuela and Argentina have exchange controls or limitations on capital flows, including requirements for the repatriation of export earnings, in place.

Argentina

On January 11, 2002, the exchange rate began to float for the first time since April 1991. Heightened demand for scarce U.S. dollars caused the Argentine peso to trade well above the one-to-one parity under the Convertibility

 

104


Table of Contents

Law. However, beginning in the second half of 2002, the adjustments in Argentina’s balance of payments and the stabilization in the value of the peso allowed the Argentine Central Bank to more effectively manage the level of liquidity and, as income from trade increased and the demand for pesos began to recover, it was able to begin replenishing its international reserves.

Starting in 2004 and during 2005 the Argentine Central Bank has, from time to time, purchased U.S. dollars in the open market in order to maintain the value of the U.S. dollar around ARP2.9 and ARP3.0, respectively, per U.S. dollar. Additionally, and in order to restrict the inflows of U.S. dollars and avoid volatility in the U.S. dollar market, on June 10, 2005 the Argentine government issued Decree No. 616/2005 establishing certain restrictions on capital inflows into Argentina. During 2006 and the first half of 2007, the Argentine Central Bank maintained the value of the U.S. dollar around ARP3.0 and ARP3.1, per U.S. dollar. Transfers of foreign currency into Argentina are only permitted upon compliance with the following requirements:

 

   

a nominative non-transferable deposit denominated in U.S. dollars for an amount equal to 30% of the relevant transaction must be made with the resulting proceeds of the relevant transaction. This deposit shall be held for a period of 365 calendar days, shall not bear interest (nor yield any other type of profit) and may not be used as collateral in any credit transaction;

 

   

inflows must remain in Argentina for a minimum term of 365 calendar days to be computed starting on the day they were converted into Argentine pesos in the local exchange market;

 

   

inflows and outflows of foreign currency into the local exchange market, and indebtedness transactions by local residents that may result in a foreign currency denominated payment to non-residents, must be registered with the Argentine Central Bank; and

 

   

the funds involved in the transactions covered by the Decree shall be credited in a local banking account.

Such requirements do not apply to foreign trade and export finance related transactions (provided that pre-export financings are repaid exclusively with export proceeds), foreign direct investment, loans granted by multilateral organizations, loans used to fund the purchase of certain fixed assets, or long-term investments overseas or to the primary placement of publicly traded securities listed in one or more exchange markets, among others.

For additional information regarding factors affecting the value of the Argentine peso, see Item 3. “Key Information—D. Risk Factors—Risks Relating to the Countries in Which We Operate—Argentina.”

The market exchange rate of the Argentine peso against the U.S. dollar continues to be determined by the forces of supply and demand in the foreign exchange market, although the Argentine government, acting through the Argentine Central Bank, has a number of means by which it may act to maintain exchange rate stability. See Item 3. “Key Information—D. Risk Factors—Risks Relating to our Business—Ternium’s results of operations and financial condition could be adversely affected by movements in exchange rates.”

Mexico

Between November 1991 and December 1994, the Mexican Central Bank maintained the exchange rate between the U.S. dollar and the Mexican peso within a prescribed range through intervention in the foreign exchange market. The Mexican Central Bank intervened in the foreign exchange market as the exchange rate reached either the minimum or the maximum of the prescribed range in order to reduce day-to-day fluctuations in the exchange rate. On December 20, 1994, the Mexican government modified the prescribed range within which the Mexican peso was permitted to float by increasing the maximum Mexican peso price of the U.S. dollar by MXN0.53, equivalent to an effective devaluation of 15.3%. On December 22, 1994, the Mexican government suspended intervention by the Mexican Central Bank and allowed the Mexican peso to float freely against the U.S. dollar. Factors that contributed to this decision included the size of Mexico’s current account deficit, a decline in the Mexican Central Bank’s foreign exchange reserves, rising interest rates for other currencies (especially the U.S. dollar) and reduced confidence in the Mexican economy on the part of investors due to political uncertainty associated with events in the

 

105


Table of Contents

state of Chiapas and presidential and congressional elections in that year. The value of the Mexican peso against the U.S. dollar rapidly declined by 42.9% from December 19, 1994 to December 31, 1994. The Mexican government has since allowed the Mexican peso to float freely against the U.S. dollar.

Historically, the Mexican economy has suffered balance of payment deficits and shortages in foreign exchange reserves. While the Mexican government does not currently restrict the ability of Mexican or foreign persons or entities to convert Mexican pesos to U.S. dollars and the terms of NAFTA, to which Mexico is a signatory, generally prohibit exchange controls, the Mexican government could institute a restrictive exchange control policy in the future.

For additional information regarding factors affecting the value of the Mexican peso, see Item 3. “Key Information—D. Risk Factors—Risks Relating to the Countries in Which We Operate—Mexico.”

Venezuela

Beginning in 2001, Venezuela experienced intense political and social turmoil involving groups that oppose and those that support the Chávez administration. Between December 2001 and February 2003, the opposition staged four nationwide work stoppages to protest against the Chávez administration, the latest of which began on December 2, 2002 and ended on February 3, 2003. Since that date, pro-government and opposition forces have taken steps towards resolving the political crisis through the electoral process.

The general work stoppage that began in December 2002, however, resulted in a significant decrease in the amount of foreign currency generated from the sale of oil. This decrease was coupled with an extraordinary increase in the demand for foreign currency, resulting in a significant decline in the level of Venezuela’s international reserves and a substantial depreciation of the Venezuelan bolívar against the U.S. dollar during the first few weeks of 2003. From December 2, 2002 until January 23, 2003, on which date Venezuela suspended foreign exchange trading in an attempt to stem the depreciation of the Venezuelan bolívar, the Venezuelan bolívar/U.S. dollar exchange rate depreciated from VEB1,322.75 = USD1.00 to VEB1,853.00 = USD1.00. The substantial reduction of oil exports resulting from the work stoppage also damaged the country’s trade balance. These problems disrupted Venezuela’s economy and threatened to affect negatively Venezuela’s ability to service its external debt. In response to those developments, Venezuela suspended foreign exchange trading on January 23, 2003. On February 5, 2003, the government adopted a series of exchange agreements, decrees and regulations establishing a new exchange control regime.

A commission, referred to as the Comisión de Administración de Divisas, or CADIVI, was created for the administration, control and establishment of the new exchange control regime. CADIVI is composed of five members appointed by the President of Venezuela. Under the new regime, the Ministry of Finance, together with the Central Bank of Venezuela, sets the exchange rate with respect to the U.S. dollar and other currencies and has discretion to modify, at any time, the existing exchange control regime or the free float of the bolívar. The new regime centralizes the purchase and sale of foreign currencies by permitting such sales to be made only through the Central Bank.

On February 5, 2003, the Ministry of Finance and the Venezuelan Central Bank fixed the U.S. dollar exchange rate at VEB1,596 = USD1.00 for purchase operations and VEB1,600 = USD1.00 for sale operations. The exchange rate for the payment of the public foreign debt was set at VEB1,600 = USD1.00 on February 7, 2003.

In February 2004, the Venezuelan government reset the exchange rate to VEB1,917 to USD1.00, a devaluation of 16.5%. In addition, in March 2005, the Venezuelan bolívar suffered a subsequent devaluation of 12%, leaving the exchange rate at VEB2,147 to USD1.00.

For additional information regarding factors affecting the value of the Venezuelan bolívar, see Item 3. “Key Information—D. Risk Factors—Risks Relating to the Countries in Which We Operate—Venezuela.”

 

106


Table of Contents

E. Taxation

The following discussion of the material Luxembourg and United States federal income tax consequences of an investment in our ADSs is based upon laws and relevant interpretations thereof in effect as of the date of this annual report, all of which are subject to change. This discussion does not address all possible tax consequences relating to an investment in our ADSs, such as the tax consequences under United States state and local tax laws.

Grand Duchy of Luxembourg

This section describes the material Luxembourg tax consequences of owning or disposing of ADSs.

You should consult your own tax adviser regarding the Luxembourg tax consequences of owning and disposing of ADSs in your particular circumstan