Document


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
 
FORM 10-K
 
þ
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 29, 2018
or
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from   ___________ to ___________               
COMMISSION FILE 1-5224 
STANLEY BLACK & DECKER, INC.
(Exact Name Of Registrant As Specified In Its Charter)
Connecticut
 
06-0548860
(State Or Other Jurisdiction Of
Incorporation Or Organization)
 
(I.R.S. Employer
Identification Number)
1000 Stanley Drive
New Britain, Connecticut
 
06053
(Address Of Principal Executive Offices)
 
(Zip Code)
860-225-5111
(Registrant’s Telephone Number)

Securities Registered Pursuant To Section 12(b) Of The Act:
Title Of Each Class
 
Name Of Each Exchange On Which Registered
Common Stock-$2.50 Par Value per Share
 
New York Stock Exchange
Securities Registered Pursuant To Section 12(g) Of The Act:
None 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes  þ    No  ¨
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.
Yes  ¨    No  þ
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days. Yes  þ    No  ¨
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    
Yes  þ    No  ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. þ
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company”, and "emerging growth company" in Rule 12b-2 of the Exchange Act. (Check one): 
Large accelerated filer
þ
  
Accelerated filer
¨
Non-accelerated filer
¨  (Do not check if a smaller reporting company)
  
Smaller reporting company
¨
 
 
 
Emerging growth company
¨
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨
Indicate by check mark whether the registrant is a shell company (as defined in Exchange Act Rule 12b-2).
Yes  ¨    No  þ
As of June 29, 2018, the aggregate market values of voting common equity held by non-affiliates of the registrant was $20.3 billion based on the New York Stock Exchange closing price for such shares on that date. On February 15, 2019, the registrant had 151,356,989 shares of common stock outstanding. 
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the Registrant’s definitive proxy statement relating to its 2019 annual meeting of shareholders (the "2019 Proxy Statement") are incorporated by reference into Part III of this Annual Report on Form 10-K where indicated. The 2019 Proxy Statement will be filed with the U.S. Securities Exchange Commission within 120 days after the end of the fiscal year to which this report relates.




TABLE OF CONTENTS

 
 
 
 
 
 
ITEM 1.
 
ITEM 1A.
 
ITEM 1B.
 
ITEM 2.
 
ITEM 3.
 
ITEM 4.
 
 
 
 
 
 
ITEM 5.
 
ITEM 6.
 
ITEM 7.
 
ITEM 7A.
 
ITEM 8.
 
ITEM 9.
 
ITEM 9A.
 
ITEM 9B.
 
 
 
 
 
 
ITEM 10.
 
ITEM 11.
 
ITEM 12.
 
ITEM 13.
 
ITEM 14.
 
 
 
 
 
 
ITEM 15.
 
ITEM 16.
 
SIGNATURES
 
 
EX-10.4
 
 
 
EX-10.5
 
 
 
EX-10.16(e)
 
 
 
EX-10.16(f)
 
 
 
EX-10.17
 
 
 
EX-21
 
 
 
EX-23
 
 
 
EX-24
 
 
 
EX-31.1.a
 
 
 
EX-31.1.b
 
 
 
EX-32.1
 
 
 
EX-32.2
 
 
 

2



FORM 10-K
PART I
ITEM 1. BUSINESS
Stanley Black & Decker, Inc. ("the Company") was founded over 175 years ago, in 1843, by Frederick T. Stanley and incorporated in Connecticut in 1852. In March 2010, the Company completed a merger ("the Merger") with The Black & Decker Corporation (“Black & Decker”), a company founded by S. Duncan Black and Alonzo G. Decker and incorporated in Maryland in 1910. At that time, the Company changed its name from The Stanley Works ("Stanley") to Stanley Black & Decker, Inc.

The Company is a diversified global provider of hand tools, power tools and related accessories, engineered fastening systems and products, services and equipment for oil & gas and infrastructure applications, commercial electronic security and monitoring systems, healthcare solutions, and mechanical access solutions (primarily automatic doors), with 2018 consolidated annual revenues of $14.0 billion. Approximately 55% of the Company’s 2018 revenues were generated in the United States, with the remainder largely from Europe (22%), emerging markets (14%) and Canada (4%).

The Company continues to execute a growth and acquisition strategy that involves industry, geographic and customer diversification to foster sustainable revenue, earnings and cash flow growth. The Company remains focused on organic growth, including increasing its presence in emerging markets, and leveraging the Stanley Fulfillment System ("SFS 2.0"), which focuses on digital excellence, commercial excellence, breakthrough innovation, core SFS operating principles, and functional transformation. In addition, the Company continues to make strides towards achieving its 22/22 Vision of reaching $22 billion in revenue by 2022 while expanding the margin rate, by becoming known as one of the world’s leading innovators, delivering top-quartile financial performance and elevating its commitment to social responsibility.

Execution of the above strategy has resulted in approximately $9.4 billion of acquisitions since 2002 (excluding the Black & Decker merger and pending acquisition of the International Equipment Solutions Attachments Group, as discussed below), which was enabled by strong cash flow generation and increased debt capacity. In recent years, the Company completed the acquisitions of Nelson Fastener Systems ("Nelson") for approximately $430 million, the Tools business of Newell Brands ("Newell Tools") for approximately $1.84 billion, and the Craftsman® brand from Sears Holdings Corporation ("Sears Holdings") for an estimated cash purchase price of approximately $937 million on a discounted basis. The Nelson acquisition is complementary to the Company's product offerings, enhances its presence in the general industrial end markets, and expands its portfolio of highly-engineered fastening solutions. The Newell Tools acquisition, which included the industrial cutting, hand tool and power tool accessory brands IRWIN® and LENOX®, enhances the Company’s position within the global tools & storage industry and broadens the Company’s product offerings and solutions to customers and end users, particularly within power tool accessories. The Craftsman acquisition provides the Company with the rights to develop, manufacture and sell Craftsman®-branded products in non-Sears Holdings channels. Furthermore, the Company reached an agreement to acquire International Equipment Solutions Attachments Group ("IES Attachments"), a manufacturer of high quality, performance-driven heavy equipment attachment tools for off-highway applications. The acquisition will further diversify the Company's presence in the industrial markets, expand its portfolio of attachment solutions and provide a meaningful platform for continued growth. The acquisition is subject to customary closing conditions, including regulatory approvals, and is expected to close in the first half of 2019.
On January 2, 2019, the Company acquired a 20 percent interest in MTD Holdings Inc. ("MTD"), a privately held global manufacturer of outdoor power equipment, for $234 million in cash.  Under the terms of the agreement, the Company has the option to acquire the remaining 80 percent of MTD beginning on July 1, 2021. The investment in MTD increases the Company's presence in the $20 billion global lawn and garden market and will allow the two companies to work together to pursue revenue and cost opportunities, improve operational efficiency, and introduce new and innovative products for professional and residential outdoor equipment customers, utilizing each company's respective portfolios of strong brands.
In February 2017, the Company completed the sale of the majority of its mechanical security businesses, which included the commercial hardware brands of Best Access, phi Precision and GMT, for net proceeds of approximately $717 million. This sale allowed the Company to deploy capital in a more accretive and growth-oriented manner. The Company has also divested several smaller businesses in recent years that did not fit into its long-term strategic objectives.

Refer to Note E, Acquisitions, and Note T, Divestitures, of the Notes to Consolidated Financial Statements in Item 8 for further discussion.
At December 29, 2018, the Company employed 60,767 people worldwide. The Company’s principal executive office is located at 1000 Stanley Drive, New Britain, Connecticut 06053 and its telephone number is (860) 225-5111.

3



Description of the Business
The Company’s operations are classified into three reportable business segments, which also represent its operating segments: Tools & Storage, Industrial and Security. All segments have significant international operations and are exposed to translational and transactional impacts from fluctuations in foreign currency exchange rates.
Additional information regarding the Company’s business segments and geographic areas is incorporated herein by reference to the material captioned “Business Segment Results” in Item 7 and Note P, Business Segments and Geographic Areas, of the Notes to Consolidated Financial Statements in Item 8.
Tools & Storage
The Tools & Storage segment is comprised of the Power Tools and Equipment ("PTE") and Hand Tools, Accessories & Storage ("HTAS") businesses. Annual revenues in the Tools & Storage segment were $9.8 billion in 2018, representing 70% of the Company’s total revenues.
The PTE business includes both professional and consumer products. Professional products include professional grade corded and cordless electric power tools and equipment including drills, impact wrenches and drivers, grinders, saws, routers and sanders, as well as pneumatic tools and fasteners including nail guns, nails, staplers and staples, concrete and masonry anchors. Consumer products include corded and cordless electric power tools sold primarily under the BLACK+DECKER® brand, lawn and garden products, including hedge trimmers, string trimmers, lawn mowers, edgers and related accessories, and home products such as hand-held vacuums, paint tools and cleaning appliances.
The HTAS business sells hand tools, power tool accessories and storage products. Hand tools include measuring, leveling and layout tools, planes, hammers, demolition tools, clamps, vises, knives, saws, chisels and industrial and automotive tools. Power tool accessories include drill bits, screwdriver bits, router bits, abrasives, saw blades and threading products. Storage products include tool boxes, sawhorses, medical cabinets and engineered storage solution products.
The segment sells its products to professional end users, distributors, retail consumers and industrial customers in a wide variety of industries and geographies. The majority of sales are distributed through retailers, including home centers, mass merchants, hardware stores, and retail lumber yards, as well as third-party distributors and a direct sales force.
Industrial
The Industrial segment is comprised of the Engineered Fastening and Infrastructure businesses. Annual revenues in the Industrial segment were $2.2 billion in 2018, representing 16% of the Company’s total revenues.
The Engineered Fastening business primarily sells engineered fastening products and systems designed for specific applications. The product lines include blind rivets and tools, blind inserts and tools, drawn arc weld studs and systems, engineered plastic and mechanical fasteners, self-piercing riveting systems and precision nut running systems, micro fasteners, and high-strength structural fasteners. The business sells to customers in the automotive, manufacturing, electronics, construction, and aerospace industries, amongst others, and its products are distributed through direct sales forces and, to a lesser extent, third-party distributors.
The Infrastructure business consists of the Oil & Gas and Hydraulics businesses. The Oil & Gas business sells and rents custom pipe handling, joint welding and coating equipment used in the construction of large and small diameter pipelines, and provides pipeline inspection services. The Hydraulics business sells hydraulic tools and accessories. The Infrastructure businesses sell to the oil and natural gas pipeline industry and other industrial customers. The products and services are primarily distributed through a direct sales force and, to a lesser extent, third-party distributors.
Security
The Security segment is comprised of the Convergent Security Solutions ("CSS") and Mechanical Access Solutions ("MAS") businesses. Annual revenues in the Security segment were $2.0 billion in 2018, representing 14% of the Company’s total revenues.
The CSS business designs, supplies and installs commercial electronic security systems and provides electronic security services, including alarm monitoring, video surveillance, fire alarm monitoring, systems integration and system maintenance. Purchasers of these systems typically contract for ongoing security systems monitoring and maintenance at the time of initial equipment installation. The business also sells healthcare solutions, which include asset tracking, infant protection, pediatric protection, patient protection, wander management, fall management, and emergency call products. The CSS business sells to consumers, retailers, educational, financial and healthcare institutions, as well as commercial, governmental and industrial

4



customers. The MAS business primarily sells automatic doors to commercial customers. Products for both businesses are sold predominantly on a direct sales basis.
Other Information
Competition
The Company competes on the basis of its reputation for product quality, its well-known brands, its commitment to customer service, its strong customer relationships, the breadth of its product lines, its innovative products and customer value propositions.
The Company encounters active competition in the Tools & Storage and Industrial segments from both larger and smaller companies that offer the same or similar products and services. Certain large customers offer private label brands (“house brands”) that compete across a wider spectrum of the Company’s Tools & Storage segment product offerings. Competition in the Security segment is generally fragmented via both large international players and regional companies. Competition tends to be based primarily on price and the quality and comprehensiveness of services offered to customers.
Major Customers
A significant portion of the Company’s Tools & Storage products are sold to home centers and mass merchants in the U.S. and Europe. A consolidation of retailers both in North America and abroad has occurred over time. While this consolidation and the domestic and international expansion of these large retailers have provided the Company with opportunities for growth, the increasing size and importance of individual customers creates a certain degree of exposure to potential sales volume loss. One customer, Lowe's, accounted for approximately 12% and 11% of the Company's consolidated net sales in 2018 and 2017, respectively. No other customer exceeded 10% of consolidated sales in 2018, 2017 or 2016.

Working Capital
The Company continues to practice the five operating principles encompassed by Core SFS, one component of the SFS 2.0 operating system, which work in concert: sales and operations planning ("S&OP"), operational lean, complexity reduction, global supply management, and order-to-cash excellence. The Company develops standardized business processes and system platforms to reduce costs and provide scalability. Core SFS / Industry 4.0 has been instrumental in reducing working capital and creating significant opportunities to generate incremental free cash flow (defined as cash flow from operations less capital and software expenditures). Working capital turns were 8.8 at the end of 2018, a slight decrease from 2017, reflecting higher levels of inventory associated with the Craftsman rollout as well as impacts from integrating recent acquisitions. The Company plans to continue leveraging Core SFS / Industry 4.0 to generate ongoing improvements, both in the existing business and future acquisitions, in working capital turns, cycle times, complexity reduction and customer service levels, with a long-term goal of sustaining 10+ working capital turns.
Raw Materials
The Company’s products are manufactured using resins, ferrous and non-ferrous metals including, but not limited to, steel, zinc, copper, brass, aluminum and nickel. The Company also purchases components such as batteries, motors, and electronic components to use in manufacturing and assembly operations along with resin-based molded parts. The raw materials required are procured globally and generally available from multiple sources at competitive prices. As part of the Company's Enterprise Risk Management, the Company has implemented a supplier risk mitigation strategy in order to identify and address any potential supply disruption associated with commodities, components, finished goods and critical services. The Company does not anticipate difficulties in obtaining supplies for any raw materials or energy used in its production processes.
Backlog
Due to short order cycles and rapid inventory turnover primarily in the Company's Tools & Storage segment, backlog is generally not considered a significant indicator of future performance. At February 2, 2019, the Company had approximately $1,001 million in unfilled orders, which mainly related to the Engineered Fastening and Security businesses. Substantially all of these orders are reasonably expected to be filled within the current fiscal year. As of February 3, 2018 and February 4, 2017, unfilled orders amounted to $929 million and $838 million, respectively.
Patents and Trademarks
No business segment is solely dependent, to any significant degree, on patents, licenses, franchises or concessions, and the loss of one or several of these patents, licenses, franchises or concessions would not have a material adverse effect on any of the Company's businesses. The Company owns numerous patents, none of which individually is material to the Company's

5



operations as a whole. These patents expire at various times over the next 20 years. The Company holds licenses, franchises and concessions, none of which individually or in the aggregate are material to the Company's operations as a whole. These licenses, franchises and concessions vary in duration, but generally run from one to 40 years.

The Company has numerous trademarks that are used in its businesses worldwide. In the Tools & Storage segment, significant trademarks include STANLEY®, BLACK+DECKER®, DEWALT®, FLEXVOLT®, IRWIN®, LENOX®, CRAFTSMAN®, PORTER-CABLE®, BOSTITCH®, FATMAX®, Powers®, Guaranteed Tough®, MAC TOOLS®, PROTO®, Vidmar®, FACOM®, USAG™, LISTA® and the yellow & black color scheme for power tools and accessories. Significant trademarks in the Industrial segment include STANLEY®, CRC®, NELSON®, LaBounty®, Dubuis®, CribMaster®, Expert®, SIDCHROME™, POP®, Avdel®, HeliCoil®, Tucker®, NPR®, Spiralock® and STANLEY® Assembly Technologies. The Security segment includes significant trademarks such as STANLEY®, Blick™, HSM®, SONITROL®, Stanley Access Technologies™, AeroScout®, Hugs®, WanderGuard®, Roam Alert®, MyCall®, Arial® and Bed-Check®. The terms of these trademarks typically vary from 10 to 20 years, with most trademarks being renewable indefinitely for like terms.
Environmental Regulations
The Company is subject to various environmental laws and regulations in the U.S. and foreign countries where it has operations. In the normal course of business, the Company is involved in various legal proceedings relating to environmental issues. The Company’s policy is to accrue environmental investigatory and remediation costs for identified sites when it is probable that a liability has been incurred and the amount of loss can be reasonably estimated. In the event that no amount in the range of probable loss is considered most likely, the minimum loss in the range is accrued. The amount of liability recorded is based on an evaluation of currently available facts with respect to each individual site and includes such factors as existing technology, presently enacted laws and regulations, and prior experience in remediation of contaminated sites. The liabilities recorded do not take into account any claims for recoveries from insurance or third parties. As assessments and remediation progress at individual sites, the amounts recorded are reviewed periodically and adjusted to reflect additional technical and legal information that becomes available. As of December 29, 2018 and December 30, 2017, the Company had reserves of $246.6 million and $176.1 million, respectively, for remediation activities associated with Company-owned properties, as well as for Superfund sites, for losses that are probable and estimable. Of the 2018 amount, $58.1 million is classified as current and $188.5 million as long-term, which is expected to be paid over the estimated remediation period. As of December 29, 2018, the Company has recorded $12.4 million in other assets related to funding by the Environmental Protection Agency ("EPA") and monies received have been placed in trust in accordance with the Consent Decree associated with the West Coast Loading Corporation ("WCLC") proceedings, as further discussed in Note S, Contingencies, of the Notes to Consolidated Financial Statements in Item 8. Accordingly, the Company's cash obligation as of December 29, 2018 associated with the aforementioned remediation activities is $234.2 million. The range of environmental remediation costs that is reasonably possible is $214.0 million to $344.3 million, which is subject to change in the near term. The Company may be liable for environmental remediation of sites it no longer owns. Liabilities have been recorded on those sites in accordance with policy.
The amount recorded for identified contingent liabilities is based on estimates. Amounts recorded are reviewed periodically and adjusted to reflect additional technical and legal information that becomes available. Actual costs to be incurred in future periods may vary from the estimates, given the inherent uncertainties in evaluating certain exposures. Subject to the imprecision in estimating future contingent liability costs, the Company does not expect that any sum it may have to pay in connection with these matters in excess of the amounts recorded will have a materially adverse effect on its financial position, results of operations or liquidity. Additional information regarding environmental matters is available in Note S, Contingencies, of the Notes to Consolidated Financial Statements in Item 8.
Employees
At December 29, 2018, the Company had 60,767 employees, 16,801 of whom were employed in the U.S. Employees in the U.S. totaling 1,433 are covered by collective bargaining agreements negotiated with 27 different local labor unions who are, in turn, affiliated with approximately 7 different international labor unions. The majority of the Company’s hourly-paid and weekly-paid employees outside the U.S. are not covered by collective bargaining agreements. The Company’s labor agreements in the U.S. expire between 2019 and 2021. There have been no significant interruptions of the Company’s operations in recent years due to labor disputes. The Company believes it has a good relationship with its employees.
Research and Development Costs
Research and development costs, which are classified in Selling, general and administrative ("SG&A"), were $275.8 million, $252.3 million and $204.4 million for fiscal years 2018, 2017 and 2016, respectively. The increases in 2018 and 2017 reflect the Company's continued focus on becoming known as one of the world's greatest innovators and its commitment to continue generating new core and breakthrough innovations.

6



Available Information
The Company’s website is located at http://www.stanleyblackanddecker.com. This URL is intended to be an inactive textual reference only. It is not intended to be an active hyperlink to the Company's website. The information on the Company's website is not, and is not intended to be, part of this Form 10-K and is not incorporated into this report by reference. The Company makes its Forms 10-K, 10-Q, 8-K and amendments to each available free of charge on its website as soon as reasonably practicable after filing them with, or furnishing them to, the U.S. Securities and Exchange Commission ("SEC"). Also available on the Company's website is the Company's Code of Ethics for its CEO and senior financial officers.


7



ITEM 1A. RISK FACTORS
The Company’s business, operations and financial condition are subject to various risks and uncertainties. You should carefully consider the risks and uncertainties described below, together with all of the other information in this Annual Report on Form 10-K, including those risks set forth under the heading entitled "Cautionary Statements Under the Private Securities Litigation Reform Act of 1995" in Item 7, and in other documents that the Company files with the SEC, before making any investment decision with respect to its securities. If any of the risks or uncertainties actually occur or develop, the Company’s business, financial condition, results of operations and future growth prospects could change. Under these circumstances, the trading prices of the Company’s securities could decline, and you could lose all or part of your investment in the Company’s securities.
Changes in customer preferences, the inability to maintain mutually beneficial relationships with large customers, inventory reductions by customers, and the inability to penetrate new channels of distribution could adversely affect the Company’s business.
The Company has certain significant customers, particularly home centers and major retailers. The two largest customers comprised approximately 22% of net sales, with U.S. and international mass merchants and home centers collectively comprising approximately 37% of net sales. The loss or material reduction of business, the lack of success of sales initiatives, or changes in customer preferences or loyalties for the Company’s products, related to any such significant customer could have a material adverse impact on the Company’s results of operations and cash flows. In addition, the Company’s major customers are volume purchasers, a few of which are much larger than the Company and have strong bargaining power with suppliers. This limits the ability to recover cost increases through higher selling prices. Furthermore, unanticipated inventory adjustments by these customers can have a negative impact on net sales.
If customers in the Convergent Security Solutions ("CSS") business are dissatisfied with services and switch to competitive services, or disconnect for other reasons such as preference for digital technology products or other technology enhancements not then offered by CSS, the Company's attrition rates may increase. In periods of increasing attrition rates, recurring revenue and results of operations may be materially adversely affected. The risk is more pronounced in times of economic uncertainty, as customers may reduce amounts spent on the products and services the Company provides.
In times of tough economic conditions, the Company has experienced significant distributor inventory corrections reflecting de-stocking of the supply chain associated with difficult credit markets. Such distributor de-stocking exacerbated sales volume declines pertaining to weak end user demand and the broader economic recession. The Company’s results may be adversely impacted in future periods by such customer inventory adjustments. Further, the inability to continue to penetrate new channels of distribution may have a negative impact on the Company’s future results.
The Company faces active global competition and if it does not compete effectively, its business may suffer.
The Company faces active competition and resulting pricing pressures. The Company’s products compete on the basis of, among other things, its reputation for product quality, its well-known brands, price, innovation and customer service capabilities. The Company competes with both larger and smaller companies that offer the same or similar products and services or that produce different products appropriate for the same uses. These companies are often located in countries such as China, Taiwan and India where labor and other production costs are substantially lower than in the U.S., Canada and Western Europe. Also, certain large customers offer house brands that compete with some of the Company’s product offerings as a lower-cost alternative. To remain profitable and defend market share, the Company must maintain a competitive cost structure, develop new products and services, lead product innovation, respond to competitor innovations and enhance its existing products in a timely manner. The Company may not be able to compete effectively on all of these fronts and with all of its competitors, and the failure to do so could have a material adverse effect on its sales and profit margins.
Core SFS / Industry 4.0 is a continuous operational improvement process applied to many aspects of the Company’s business such as procurement, quality in manufacturing, maximizing customer fill rates, integrating acquisitions and other key business processes. In the event the Company is not successful in effectively applying the Core SFS principles to its key business processes, including those of acquired businesses, its ability to compete and future earnings could be adversely affected.
In addition, the Company may have to reduce prices on its products and services, or make other concessions, to stay competitive and retain market share. Price reductions taken by the Company in response to customer and competitive pressures, as well as price reductions and promotional actions taken to drive demand that may not result in anticipated sales levels, could also negatively impact its business. The Company engages in restructuring actions, sometimes entailing shifts of production to low-cost countries, as part of its efforts to maintain a competitive cost structure. If the Company does not execute restructuring actions well, its ability to meet customer demand may decline, or earnings may otherwise be adversely impacted. Similarly, if

8



such efforts to reform the cost structure are delayed relative to competitors or other market factors, the Company may lose market share and profits.
Customer consolidation could have a material adverse effect on the Company’s business.
A significant portion of the Company’s products are sold through home centers and mass merchant distribution channels in the U.S. and Europe. A consolidation of retailers in both North America and abroad has occurred over time and the increasing size and importance of individual customers creates risk of exposure to potential volume loss. The loss of certain larger home centers as customers would have a material adverse effect on the Company’s business until either such customers were replaced or the Company made the necessary adjustments to compensate for the loss of business.
Low demand for new products and the inability to develop and introduce new products at favorable margins could adversely impact the Company’s performance and prospects for future growth.
The Company’s competitive advantage is due in part to its ability to develop and introduce new products in a timely manner at favorable margins. The uncertainties associated with developing and introducing new products, such as market demand and costs of development and production, may impede the successful development and introduction of new products on a consistent basis. Introduction of new technology may result in higher costs to the Company than that of the technology replaced. That increase in costs, which may continue indefinitely or until increased demand and greater availability in the sources of the new technology drive down its cost, could adversely affect the Company’s results of operations. Market acceptance of the new products introduced in recent years and scheduled for introduction in future years may not meet sales expectations due to various factors, such as the failure to accurately predict market demand, end-user preferences, evolving industry standards, or the emergence of new or disruptive technologies. Moreover, the ultimate success and profitability of the new products may depend on the Company’s ability to resolve technical and technological challenges in a timely and cost-effective manner, and to achieve manufacturing efficiencies. The Company’s investments in productive capacity and commitments to fund advertising and product promotions in connection with these new products could erode profits if those expectations are not met.
The Company’s brands are important assets of its businesses and violation of its trademark rights by imitators, or the failure of its licensees or vendors to comply with the Company’s product quality, manufacturing requirements, marketing standards, and other requirements could negatively impact revenues and brand reputation.
The Company’s trademarks have a reputation for quality and value and are important to the Company's success and competitive position. Unauthorized use of the Company’s trademark rights may not only erode sales of the Company’s products, but may also cause significant damage to its brand name and reputation, interfere with its ability to effectively represent the Company to its customers, contractors, suppliers, and/or licensees, and increase litigation costs. Similarly, failure by licensees or vendors to adhere to the Company’s standards of quality and other contractual requirements could result in loss of revenue, increased litigation, and/or damage to the Company’s reputation and business. There can be no assurance that the Company’s ongoing efforts to protect its brand and trademark rights and ensure compliance with its licensing and vendor agreements will prevent all violations.

Successful sales and marketing efforts depend on the Company’s ability to recruit and retain qualified employees.
The success of the Company’s efforts to grow its business depends on the contributions and abilities of key executives, its sales force and other personnel, including the ability of its sales force to adapt to any changes made in the sales organization and achieve adequate customer coverage. The Company must therefore continue to recruit, retain and motivate management, sales and other personnel sufficiently to maintain its current business and support its projected growth. A shortage of these key employees might jeopardize the Company’s ability to implement its growth strategy.
The Company has significant operations outside of the United States, which are subject to political, legal, economic and other risks arising from operating outside of the United States.
The Company generates a significant portion of its total revenue outside of the United States. Business operations outside of the United States are subject to political, economic and other risks inherent in operating in certain countries, such as:
the difficulty of enforcing agreements and protecting assets through legal systems outside the U.S.;
managing widespread operations and enforcing internal policies and procedures such as compliance with U.S. and foreign anti-bribery and anti-corruption regulations;
trade protection measures and import or export licensing requirements including those related to the U.S.'s relationship with China;
the application of certain labor regulations outside of the United States, including data privacy;

9



compliance with a wide variety of non-U.S. laws and regulations;
changes in the general political and economic conditions in the countries where the Company operates, particularly in emerging markets;
the threat of nationalization and expropriation;
increased costs and risks of doing business in a wide variety of jurisdictions;
government controls limiting importation of goods;
government controls limiting payments to suppliers for imported goods;
limitations on, or impacts from, the repatriation of foreign earnings; and
exposure to wage, price and capital controls.
Changes in the political or economic environments in the countries in which the Company operates could have a material adverse effect on its financial condition, results of operations or cash flows. Additionally, the Company is subject to complex U.S., foreign and other local laws and regulations that are applicable to its operations abroad, such as the Foreign Corrupt Practices Act of 1977, the U.K. Bribery Act of 2010 and other anti-bribery and anti-corruption laws. Although the Company has implemented internal controls, policies and procedures and employee training and compliance programs to deter prohibited practices, such measures may not be effective in preventing employees, contractors or agents from violating or circumventing such internal policies and violating applicable laws and regulations. Any determination that the Company has violated anti-bribery or anti-corruption laws could have a material adverse effect on the Company’s business, operating results and financial condition. Compliance with international and U.S. laws and regulations that apply to the Company’s international operations increases the cost of doing business in foreign jurisdictions. Violations of such laws and regulations may result in severe fines and penalties, criminal sanctions, administrative remedies or restrictions on business conduct, and could have a material adverse effect on the Company’s reputation, its ability to attract and retain employees, its business, operating results and financial condition.
The Company’s business is subject to risks associated with sourcing and manufacturing overseas.
The Company imports large quantities of finished goods, component parts and raw materials. Substantially all of its import operations are subject to customs requirements and to tariffs and quotas set by governments through mutual agreements, bilateral actions or, in some cases unilateral action. In addition, the countries in which the Company’s products and materials are manufactured or imported from (including importation into the U.S. of the Company's products manufactured overseas) may from time to time impose additional quotas, duties, tariffs or other restrictions on its imports (including restrictions on manufacturing operations) or adversely modify existing restrictions. For example, changes in U.S. policy regarding international trade, including import and export regulation and international trade agreements, could also negatively impact the Company’s business. In 2018, the U.S. imposed tariffs on steel and aluminum as well as on goods imported from China and certain other countries, which has resulted in retaliatory tariffs by China and other countries. Additional tariffs imposed by the U.S. on a broader range of imports, or further retaliatory trade measures taken by China or other countries in response, could result in an increase in supply chain costs that the Company may not be able to offset or otherwise adversely impact the Company’s results of operations. Furthermore, imported products and materials may be subject to future tariffs or other trade measures in the U.S. Imports are also subject to unpredictable foreign currency variation which may increase the Company’s cost of goods sold. Adverse changes in these import costs and restrictions, or the Company’s suppliers’ failure to comply with customs regulations or similar laws, could harm the Company’s business.
The Company’s operations are also subject to the effects of international trade agreements and regulations such as the United States-Mexico-Canada Agreement, and the activities and regulations of the World Trade Organization. Although these trade agreements generally have positive effects on trade liberalization, sourcing flexibility and cost of goods by reducing or eliminating the duties and/or quotas assessed on products manufactured in a particular country, trade agreements can also impose requirements that adversely affect the Company’s business, such as setting quotas on products that may be imported from a particular country into key markets including the U.S. or the European Union ("EU"), or making it easier for other companies to compete, by eliminating restrictions on products from countries where the Company’s competitors source products.
The Company’s ability to import products in a timely and cost-effective manner may also be affected by conditions at ports or issues that otherwise affect transportation and warehousing providers, such as port and shipping capacity, labor disputes, severe weather or increased homeland security requirements in the U.S. and other countries. These issues could delay importation of products or require the Company to locate alternative ports or warehousing providers to avoid disruption to customers. These

10



alternatives may not be available on short notice or could result in higher transit costs, which could have an adverse impact on the Company’s business and financial condition.
In addition, the Company has a number of key suppliers in South Korea. Escalation of hostilities with North Korea and/or military action in the region could cause disruptions in the Company's supply chain which could, in turn, cause product shortages, delays in delivery and/or increases in the Company's cost incurred to produce and deliver products to its customers.
The Company’s success depends on its ability to improve productivity and streamline operations to control or reduce costs.
The Company is committed to continuous productivity improvement and evaluating opportunities to reduce fixed costs, simplify or improve processes, and eliminate excess capacity. The Company has undertaken restructuring actions, the savings of which may be mitigated by many factors, including economic weakness, competitive pressures, and decisions to increase costs in areas such as sales promotion or research and development above levels that were otherwise assumed. Failure to achieve, or delays in achieving, projected levels of efficiencies and cost savings from such measures, or unanticipated inefficiencies resulting from manufacturing and administrative reorganization actions in progress or contemplated, would adversely affect the Company’s results.
The Company is exposed to risks related to cybersecurity and data privacy compliance.
The Company’s operations rely on the secure processing, storage and transmission of confidential, sensitive, proprietary and other types of information relating to its business operations, as well as confidential and sensitive information about its customers and employees maintained in the Company’s computer systems and networks, certain products and services, and in the computer systems and networks of its third-party vendors. Cyber threats are rapidly evolving as data thieves and hackers have become increasingly sophisticated and carry out large-scale, complex automated attacks. The Company may not be able to anticipate or prevent all such attacks and could be held liable for any resulting security breach or data loss. In addition, it is not always possible to deter misconduct by employees or third-party vendors.
Breaches of the Company’s or the Company’s vendors’ technology and systems, whether from circumvention of security systems, denial-of-service attacks or other cyber-attacks, hacking, “phishing” attacks, computer viruses, ransomware or malware, employee or insider error, malfeasance, social engineering, physical breaches or other actions, may result in manipulation or corruption of sensitive data, material interruptions or malfunctions in the Company’s or such vendors’ websites, applications, data processing, and certain products and services, or disruption of other business operations. Furthermore, any such breaches could compromise the confidentiality and integrity of material information held by the Company (including information about the Company’s business, employees or customers), as well as sensitive personally identifiable information (“PII”), the disclosure of which could lead to identity theft. Measures that the Company takes to avoid, detect, mitigate or recover from material incidents, including implementing and conducting training on insider trading policies for the Company’s employees and maintaining contractual obligations for the Company’s third-party vendors, can be expensive, and may be insufficient, circumvented, or may become ineffective.
To conduct its operations, the Company regularly moves data across national borders, and consequently is subject to a variety of continuously evolving and developing laws and regulations in the United States and abroad regarding privacy, data protection and data security. The scope of the laws that may be applicable to the Company is often uncertain and may be conflicting, particularly with respect to foreign laws. For example, the European Union’s General Data Protection Regulation (“GDPR”), which became effective in May 2018, greatly increased the jurisdictional reach of European Union law and added a broad array of requirements for handling personal data, including the public disclosure of significant data breaches. Additionally, other countries have enacted or are enacting data localization laws that require data to stay within their borders. In many cases, these laws and regulations apply not only to transfers between unrelated third parties but also to transfers between the Company and its subsidiaries. All of these evolving compliance and operational requirements impose significant costs that are likely to increase over time. Implementation of the GDPR and data localization laws will continue to require changes to certain business practices, thereby increasing costs, or may result in negative publicity, require significant management time and attention, and may subject the Company to remedies that may harm its business, including fines or demands or orders that the Company modify or cease existing business practices.
The Company has invested and continues to invest in risk management and information security and data privacy measures in order to protect its systems and data, including employee training, organizational investments, incident response plans, table top exercises and technical defenses. The cost and operational consequences of implementing, maintaining and enhancing further data or system protection measures could increase significantly to overcome increasingly intense, complex, and sophisticated global cyber threats. Despite the Company’s best efforts, it is not fully insulated from data breaches and system disruptions. Recent well-publicized security breaches at other companies have led to enhanced government and regulatory scrutiny of the

11



measures taken by companies to protect against cyber-attacks, and may in the future result in heightened cybersecurity requirements, including additional regulatory expectations for oversight of vendors and service providers. Any material breaches of cybersecurity, including the accidental loss, inadvertent disclosure or unapproved dissemination of proprietary information or sensitive or confidential data, or media reports of perceived security vulnerabilities to the Company’s systems, products and services or those of the Company’s third parties, even if no breach has been attempted or occurred, could cause the Company to experience reputational harm, loss of customers and revenue, fines, regulatory actions and scrutiny, sanctions or other statutory penalties, litigation, liability for failure to safeguard the Company’s customers’ information, or financial losses that are either not insured against or not fully covered through any insurance maintained by the Company. Any of the foregoing may have a material adverse effect on the Company’s business, operating results and financial condition.
The performance of the Company may suffer from business disruptions or other costs associated with information technology, cyber attacks, system implementations, data privacy, or catastrophic losses affecting distribution centers and other infrastructure.
The Company relies heavily on computer systems, including those of third parties, to manage and operate its businesses, and record and process transactions. Computer systems are important to production planning, customer service and order fulfillment among other business-critical processes. Consistent and efficient operation of the computer hardware and software systems is imperative to the successful sales and earnings performance of the various businesses in many countries.
Despite efforts to prevent such situations and maintaining insurance policies and loss control and risk management practices that partially mitigate these risks, the Company’s systems may be affected by damage or interruption from, among other causes, power outages, system failures or computer viruses. Computer hardware and storage equipment that is integral to efficient operations, such as e-mail, telephone and other functionality, is concentrated in certain physical locations in the various continents in which the Company operates. Additionally, the Company relies on software applications and enterprise cloud storage systems and cloud computing services provided by third-party vendors, and the Company's business may be adversely affected by service disruptions or security breaches in such third-party systems.
In addition, the Company is in the process of system conversions to SAP as well as other applications to provide a common platform across most of its businesses. There can be no assurances that expected expense synergies will be achieved or that there will not be delays to the expected timing of such synergies. It is possible the costs to complete the system conversions may exceed current expectations, and that significant costs may be incurred that will require immediate expense recognition as opposed to capitalization. The risk of disruption to key operations is increased when complex system changes such as SAP conversions are undertaken. If systems fail to function effectively, or become damaged, operational delays may ensue and the Company may be forced to make significant expenditures to remedy such issues. Any significant disruption in the Company’s computer operations could have a material adverse impact on its business and results.
The Company’s operations are significantly dependent on infrastructure, notably certain distribution centers and security alarm monitoring facilities, which are concentrated in various geographic locations. Factors that are hard to predict or beyond the Company’s control, like weather (including any potential effects of climate change), natural disasters, supply and commodity shortages, fire, explosions, terrorism, political unrest, cybersecurity breaches, generalized labor unrest or health pandemics could damage or disrupt the Company’s infrastructure, or that of its suppliers or distributors. If the Company does not effectively plan for or respond to disruptions in its operations, or cannot quickly repair damage to its information, production or supply systems, the Company may be late in delivering or unable to deliver products and services to its customers, and the quality and safety of its products and services might be negatively affected. If a material or extended disruption occurs, the Company may lose its customers’ or business partners’ confidence or suffer damage to its reputation, and long-term consumer demand for its products and services could decline. Although the Company maintains business interruption insurance, it may not fully protect the Company against all adverse effects that could result from significant disruptions. These events could materially and adversely affect the Company’s product sales, financial condition and results of operations.
The Company’s results of operations could be negatively impacted by inflationary or deflationary economic conditions which could affect the ability to obtain raw materials, component parts, freight, energy, labor and sourced finished goods in a timely and cost-effective manner.
The Company’s products are manufactured using both ferrous and non-ferrous metals including, but not limited to, steel, zinc, copper, brass, aluminum, and nickel. Additionally, the Company uses other commodity-based materials for components and packaging including, but not limited to, plastics, resins, wood and corrugated products. The Company’s cost base also reflects significant elements for freight, energy and labor. The Company also sources certain finished goods directly from vendors. If the Company is unable to mitigate any inflationary increases through various customer pricing actions and cost reduction initiatives, its profitability may be adversely affected.

12



Conversely, in the event there is deflation, the Company may experience pressure from its customers to reduce prices, and there can be no assurance that the Company would be able to reduce its cost base (through negotiations with suppliers or other measures) to offset any such price concessions which could adversely impact results of operations and cash flows.
Further, as a result of inflationary or deflationary economic conditions, the Company believes it is possible that a limited number of suppliers may either cease operations or require additional financial assistance from the Company in order to fulfill their obligations. In a limited number of circumstances, the magnitude of the Company’s purchases of certain items is of such significance that a change in established supply relationships with suppliers or increase in the costs of purchased raw materials, component parts or finished goods could result in manufacturing interruptions, delays, inefficiencies or an inability to market products. Changes in value-added tax rebates, currently available to the Company or to its suppliers, could also increase the costs of the Company’s manufactured products, as well as purchased products and components, and could adversely affect the Company’s results.
In addition, many of the Company’s products incorporate battery technology. As other industries begin to adopt similar battery technology for use in their products, the increased demand could place capacity constraints on the Company’s supply chain. In addition, increased demand for battery technology may also increase the costs to the Company for both the battery cells as well as the underlying raw materials. If the Company is unable to mitigate any possible supply constraints or related increased costs, its profitably and financial results could be negatively impacted.
Uncertainty about the financial stability of economies outside the U.S. could have a significant adverse effect on the Company's business, results of operations and financial condition.
The Company generates approximately 45% of its revenues from outside the U.S., including 22% from Europe and 14% from various emerging market countries. Each of the Company’s segments generates sales from these marketplaces. While the Company believes any downturn in the European or emerging marketplaces might be offset to some degree by the relative stability in North America, the Company’s future growth, profitability and financial liquidity could be affected, in several ways, including but not limited to the following:
depressed consumer and business confidence may decrease demand for products and services;
customers may implement cost-reduction initiatives or delay purchases to address inventory levels;
significant declines of foreign currency values in countries where the Company operates could impact both the revenue growth and overall profitability in those geographies;
a slowing or contracting Chinese economy could reduce China’s consumption and negatively impact the Company’s sales in that region, as well as globally;
a devaluation of foreign currencies could have an effect on the credit worthiness (as well as the availability of funds) of customers in those regions impacting the collectability of receivables;
a devaluation of foreign currencies could have an adverse effect on the value of financial assets of the Company in the effected countries;
the impact of an event (individual country default, Brexit, or break up of the Euro) could have an adverse impact on the global credit markets and global liquidity potentially impacting the Company’s ability to access these credit markets and to raise capital. With respect to Brexit, until the terms of the UK’s exit from the EU in March 2019 are determined, including any transition period, it is difficult to predict its impact. It is possible that the withdrawal could, among other things, affect the legal and regulatory environments to which the Company’s businesses are subject, impact trade between the UK and the EU and other parties and create economic and political uncertainty in the region.
The Company is exposed to market risk from changes in foreign currency exchange rates which could negatively impact profitability.
The Company manufactures and sells its products in many countries throughout the world. As a result, there is exposure to foreign currency risk as the Company enters into transactions and makes investments denominated in multiple currencies. The Company’s predominant currency exposures are related to the Euro, Canadian Dollar, British Pound, Australian Dollar, Brazilian Real, Argentine Peso, Chinese Renminbi (“RMB”) and the Taiwan Dollar. In preparing its financial statements, for foreign operations with functional currencies other than the U.S. dollar, asset and liability accounts are translated at current exchange rates, while income and expenses are translated using average exchange rates. With respect to the effects on translated earnings, if the U.S. dollar strengthens relative to local currencies, the Company’s earnings could be negatively impacted. In 2018, translational and transactional foreign currency fluctuations negatively impacted pre-tax earnings by approximately $100.0 million and diluted earnings per share by approximately $0.55. The translational and transactional impacts will vary over time and may be more material in the future. Although the Company utilizes risk management tools,

13



including hedging, as it deems appropriate, to mitigate a portion of potential market fluctuations in foreign currencies, there can be no assurance that such measures will result in all market fluctuation exposure being eliminated. The Company generally does not hedge the translation of its non-U.S. dollar earnings in foreign subsidiaries, but may choose to do so in certain instances.
The Company sources many products from China and other low-cost countries for resale in other regions. To the extent the RMB or other currencies appreciate, the Company may experience cost increases on such purchases. The Company may not be successful at implementing customer pricing or other actions in an effort to mitigate the related cost increases and thus its profitability may be adversely impacted.
The Company has incurred, and may incur in the future, significant indebtedness, or issue additional equity securities, in connection with mergers or acquisitions which may impact the manner in which it conducts business or the Company’s access to external sources of liquidity. The potential issuance of such securities may limit the Company’s ability to implement elements of its growth strategy and may have a dilutive effect on earnings.

As described in Note H, Long-Term Debt and Financing Arrangements, of the Notes to Consolidated Financial Statements in Item 8, the Company has a five-year $2.0 billion committed credit facility and a 364-day $1.0 billion committed credit facility.  No amounts were outstanding against either of these facilities at December 29, 2018.
The instruments and agreements governing certain of the Company’s current indebtedness contain requirements or restrictive covenants that include, among other things:
a limitation on creating liens on certain property of the Company and its subsidiaries;
a restriction on entering into certain sale-leaseback transactions;
customary events of default. If an event of default occurs and is continuing, the Company might be required to repay all amounts outstanding under the respective instrument or agreement; and
maintenance of a specified financial ratio. The Company has an interest coverage covenant that must be maintained to permit continued access to its committed revolving credit facilities. The interest coverage ratio tested for covenant compliance compares adjusted Earnings Before Interest, Taxes, Depreciation and Amortization to adjusted Interest Expense ("adjusted EBITDA"/"adjusted Interest Expense"); such adjustments to interest or EBITDA include, but are not limited to, removal of non-cash interest expense and stock-based compensation expense. The interest coverage ratio must not be less than 3.5 times and is computed quarterly, on a rolling twelve months (last twelve months) basis. Under this covenant definition, the interest coverage ratio was 8.5 times EBITDA or higher in each of the 2018 quarterly measurement periods. Management does not believe it is reasonably likely the Company will breach this covenant. Failure to maintain this ratio could adversely affect further access to liquidity.
Future instruments and agreements governing indebtedness may impose other restrictive conditions or covenants. Such covenants could restrict the Company in the manner in which it conducts business and operations as well as in the pursuit of its growth and repositioning strategies.
The Company is exposed to counterparty risk in its hedging arrangements.
From time to time, the Company enters into arrangements with financial institutions to hedge exposure to fluctuations in currency and interest rates, including forward contracts, options and swap agreements. The failure of one or more counterparties to the Company’s hedging arrangements to fulfill their obligations could adversely affect the Company’s results of operations.
Tight capital and credit markets or the failure to maintain credit ratings could adversely affect the Company by limiting the Company’s ability to borrow or otherwise access liquidity.
The Company’s long-term growth plans are dependent on, among other things, the availability of funding to support corporate initiatives and complete appropriate acquisitions and the ability to increase sales of existing product lines. While the Company has not encountered financing difficulties to date, the capital and credit markets have experienced extreme volatility and disruption in the past and may again in the future. Market conditions could make it more difficult for the Company to borrow or otherwise obtain the cash required for significant new corporate initiatives and acquisitions. In addition, changes in regulatory standards or industry practices, such as the transition away from LIBOR to the Secured Overnight Financing Rate ("SOFR") as a benchmark reference for short-term interests, could create incremental uncertainty in obtaining financing or increase the cost of borrowing.

14



Furthermore, there could be a number of follow-on effects from a credit crisis on the Company’s businesses, including insolvency of key suppliers resulting in product delays; inability of customers to obtain credit to finance purchases of the Company’s products and services and/or customer insolvencies.
In addition, the major rating agencies regularly evaluate the Company for purposes of assigning credit ratings. The Company’s ability to access the credit markets, and the cost of these borrowings, is affected by the strength of its credit ratings and current market conditions. Failure to maintain credit ratings that are acceptable to investors may adversely affect the cost and other terms upon which the Company is able to obtain financing, as well as its access to the capital markets.
The Company’s acquisitions, as well as general business reorganizations, may result in significant costs and certain risks for its business and operations.
In 2018, the Company completed the Nelson acquisition as well as a number of other smaller acquisitions. In addition, the Company reached an agreement to acquire International Equipment Solutions Attachments Group ("IES Attachments"), which is expected to close in the first half of 2019, and may make additional acquisitions in the future.
Acquisitions involve a number of risks, including:
the failure to identify the most suitable candidates for acquisitions;
the ability to identify and close on appropriate acquisition opportunities within desired time frames at reasonable cost;
the anticipated additional revenues from the acquired companies do not materialize, despite extensive due diligence;
the possibility that the acquired companies will not be successfully integrated or that anticipated cost savings, synergies, or other benefits will not be realized;
the acquired businesses will lose market acceptance or profitability;
the diversion of Company management’s attention and other resources;
the incurrence of unexpected costs and liabilities, including those associated with undisclosed pre-closing regulatory violations by the acquired business; and
the loss of key personnel, clients or customers of acquired companies.
In addition, the success of the Company’s long-term growth and repositioning strategy will depend in part on successful general reorganization including its ability to:
combine businesses and operations;
integrate departments, systems and procedures; and
obtain cost savings and other efficiencies from such reorganizations, including the Company's functional transformation initiative.
Failure to effectively consummate or manage the pending IES Attachments acquisition and any future acquisitions or general business reorganizations, and mitigate the related risks, may adversely affect the Company’s existing businesses and harm its operational results due to large write-offs, significant restructuring costs, contingent liabilities, substantial depreciation, and/or adverse tax or other consequences. The Company cannot ensure that such integrations and reorganizations will be successfully completed or that all of the planned synergies and other benefits will be realized.
Expansion of the Company's activity in emerging markets may result in risks due to differences in business practices and cultures.
The Company's growth plans include efforts to increase revenue from emerging markets through both organic growth and acquisitions. Local business practices in these regions may not comply with U.S. laws, local laws or other laws applicable to the Company. When investigating potential acquisitions, the Company seeks to identify historical practices of target companies that would create liability or other exposures for the Company were they to continue post-completion or as a successor to the target. Where such practices are discovered, the Company assesses the risk to determine whether it is prepared to proceed with the transaction. In assessing the risk, the Company looks at, among other factors, the nature of the violation, the potential liability, including any fines or penalties that might be incurred, the ability to avoid, minimize or obtain indemnity for the risks, and the likelihood that the Company would be able to ensure that any such practices are discontinued following completion of the acquisition through implementation of its own policies and procedures. Due diligence and risk assessment are, however, imperfect processes, and it is possible that the Company will not discover problematic practices until after completion, or that the Company will underestimate the risks associated with historical activities. Should that occur, the Company may incur fees,

15



fines, penalties, injury to its reputation or other damage that could negatively impact the Company's earnings.
Significant judgment and certain estimates are required in determining the Company’s worldwide provision for income taxes. Future tax law changes and audit results may materially increase the Company’s prospective income tax expense.
The Company is subject to income taxation in the U.S. as well as numerous foreign jurisdictions. Significant judgment is required in determining the Company’s worldwide income tax provision and accordingly there are many transactions and computations for which the final income tax determination is uncertain. The Company considers many factors when evaluating and estimating its tax positions and tax benefits, which may require periodic adjustments, and which may not accurately anticipate actual outcomes. The Company periodically assesses its liabilities and contingencies for all tax years still subject to audit based on the most currently available information, which involves inherent uncertainty. The Company is routinely audited by income tax authorities in many tax jurisdictions. Although management believes the recorded tax estimates are reasonable, the ultimate outcome of any audit (or related litigation) could differ materially from amounts reflected in the Company’s income tax accruals. Additionally, the global income tax provision can be materially impacted due to foreign currency fluctuations against the U.S. dollar since a significant amount of the Company’s earnings are generated outside the United States. Lastly, it is possible that future income tax legislation may be enacted that could have a material impact on the Company’s worldwide income tax provision beginning with the period that such legislation becomes enacted.
On December 22, 2017, the U.S. government enacted comprehensive tax legislation commonly referred to as the Tax Cuts and Jobs Act (“the Act”). Changes include, but are not limited to, a corporate tax rate decrease from 35% to 21% effective for tax years beginning after December 31, 2017, changes to U.S. international taxation, and a one-time transition tax on the mandatory deemed repatriation of cumulative foreign earnings as of December 31, 2017. Following enactment of the Act and the associated one-time transition tax, in general, repatriation of foreign earnings to the United States can be completed with no incremental U.S. tax. However, repatriation of foreign earnings could subject the Company to U.S. state and non-U.S. jurisdictional taxes (including withholding taxes) on distributions. While repatriation of some foreign earnings held outside the United States may be restricted by local laws, most of the Company’s foreign earnings as of December 31, 2017 could be repatriated to the United States. Pursuant to Staff Accounting Bulletin No. 118 (“SAB 118”) issued by the SEC in December 2017, issuers were permitted up to one year from the enactment of the Act to complete the accounting for the income tax effects of the Act (“the measurement period”). The Company completed its accounting for the tax effects of the Act within the measurement period and has included those effects in Income Taxes in the Consolidated Statements of Operations.
The Company’s failure to continue to successfully avoid, manage, defend, litigate and accrue for claims and litigation could negatively impact its results of operations or cash flows.
The Company is exposed to and becomes involved in various litigation matters arising out of the ordinary routine conduct of its business, including, from time to time, actual or threatened litigation relating to such items as commercial transactions, product liability, workers compensation, arrangements between the Company and its distributors, franchisees or vendors, intellectual property claims and regulatory actions.
In addition, the Company is subject to environmental laws in each jurisdiction in which business is conducted. Some of the Company’s products incorporate substances that are regulated in some jurisdictions in which it conducts manufacturing operations. The Company could be subject to liability if it does not comply with these regulations. In addition, the Company is currently, and may in the future be held responsible for remedial investigations and clean-up costs resulting from the discharge of hazardous substances into the environment, including sites that have never been owned or operated by the Company but at which it has been identified as a potentially responsible party under federal and state environmental laws and regulations. Changes in environmental and other laws and regulations in both domestic and foreign jurisdictions could adversely affect the Company’s operations due to increased costs of compliance and potential liability for non-compliance.
The Company manufactures products, configures and installs security systems and performs various services that create exposure to product and professional liability claims and litigation. If such products, systems and services are not properly manufactured, configured, installed, designed or delivered, personal injuries, property damage or business interruption could result, which could subject the Company to claims for damages. The costs associated with defending product liability claims and payment of damages could be substantial. The Company’s reputation could also be adversely affected by such claims, whether or not successful.
There can be no assurance that the Company will be able to continue to successfully avoid, manage and defend such matters. In addition, given the inherent uncertainties in evaluating certain exposures, actual costs to be incurred in future periods may vary from the Company’s estimates for such contingent liabilities.

16



The Company’s products could be recalled.
The Consumer Product Safety Commission or other applicable regulatory bodies may require the recall, repair or replacement of the Company’s products if those products are found not to be in compliance with applicable standards or regulations. A recall could increase costs and adversely impact the Company’s reputation.
The Company is exposed to credit risk on its accounts receivable.
The Company’s outstanding trade receivables are not generally covered by collateral or credit insurance. While the Company has procedures to monitor and limit exposure to credit risk on its trade and non-trade receivables, there can be no assurance such procedures will effectively limit its credit risk and avoid losses, which could have an adverse effect on the Company’s financial condition and operating results.
If the Company were required to write-down all or part of its goodwill, indefinite-lived trade names, or other definite-lived intangible assets, its net income and net worth could be materially adversely affected.
As a result of the Black and Decker merger and other acquisitions, the Company has approximately $9.0 billion of goodwill, approximately $2.2 billion of indefinite-lived trade names and approximately $1.3 billion of net definite-lived intangible assets at December 29, 2018. The Company is required to periodically, at least annually, determine if its goodwill or indefinite-lived trade names have become impaired, in which case it would write down the impaired portion of the asset. The definite-lived intangible assets, including customer relationships, are amortized over their estimated useful lives and are evaluated for impairment when appropriate. Impairment of intangible assets may be triggered by developments outside of the Company’s control, such as worsening economic conditions, technological change, intensified competition or other factors resulting in deleterious consequences.
If the investments in employee benefit plans do not perform as expected, the Company may have to contribute additional amounts to these plans, which would otherwise be available to cover operating expenses or other business purposes.
The Company sponsors pension and other post-retirement defined benefit plans. The Company’s defined benefit plan assets are currently invested in equity securities, government and corporate bonds and other fixed income securities, money market instruments and insurance contracts. The Company’s funding policy is generally to contribute amounts determined annually on an actuarial basis to provide for current and future benefits in accordance with applicable law which require, among other things, that the Company make cash contributions to under-funded pension plans. During 2018, the Company made cash contributions to its defined benefit plans of approximately $45 million and it expects to contribute $44 million to its defined benefit plans in 2019.
There can be no assurance that the value of the defined benefit plan assets, or the investment returns on those plan assets, will be sufficient in the future. It is therefore possible that the Company may be required to make higher cash contributions to the plans in future years which would reduce the cash available for other business purposes, and that the Company will have to recognize a significant pension liability adjustment which would decrease the net assets of the Company and result in higher expense in future years. The fair value of the defined benefit plan assets at December 29, 2018 was approximately $2.0 billion.


17



ITEM 1B. UNRESOLVED STAFF COMMENTS
None.

18




ITEM 2. PROPERTIES
As of December 29, 2018, the Company and its subsidiaries owned or leased significant facilities used for manufacturing, distribution and sales offices in 20 states and 16 foreign countries. The Company leases its corporate headquarters in New Britain, Connecticut. The Company has 88 other facilities that are larger than 100,000 square feet, as follows:
 
Owned
 
Leased
 
Total
Tools & Storage
45
 
20
 
65
Industrial
12
 
5
 
17
Security
2
 
2
 
4
Corporate
1
 
1
 
2
Total
60
 
28
 
88
The combined size of these facilities is approximately 23 million square feet. The buildings are in good condition, suitable for their intended use, adequate to support the Company’s operations, and generally fully utilized.

ITEM 3. LEGAL PROCEEDINGS

In the normal course of business, the Company is involved in various lawsuits and claims, including product liability, environmental and distributor claims, and administrative proceedings. The Company does not expect that the resolution of these matters will have a materially adverse effect on the Company’s consolidated financial position, results of operations or liquidity.
ITEM 4. MINE SAFETY DISCLOSURES
Not applicable.

19



PART II
ITEM 5. MARKET FOR THE REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
The Company’s common stock is listed and traded on the New York Stock Exchange, Inc. (“NYSE”) under the abbreviated ticker symbol “SWK”, and is a component of the Standard & Poor’s (“S&P”) 500 Composite Stock Price Index. The Company’s high and low quarterly stock prices on the NYSE for the years ended December 29, 2018 and December 30, 2017 follow:
 
 
 
2018
 
2017
 
 
High
 
Low
 
Dividend Per
Common
Share
 
High
 
Low
 
Dividend Per
Common
Share
QUARTER:
 
 
 
 
 
 
 
 
 
 
 
 
First
 
$
175.91

 
$
150.84

 
$
0.63

 
$
132.87

 
$
115.75

 
$
0.58

Second
 
$
157.38

 
$
132.81

 
$
0.63

 
$
143.05

 
$
130.57

 
$
0.58

Third
 
$
154.36

 
$
131.84

 
$
0.66

 
$
152.30

 
$
137.07

 
$
0.63

Fourth
 
$
147.51

 
$
108.45

 
$
0.66

 
$
170.03

 
$
154.53

 
$
0.63

Total
 
 
 
 
 
$
2.58

 
 
 
 
 
$
2.42

As of February 1, 2019, there were 9,705 holders of record of the Company’s common stock. Information required by Item 201(d) of Regulation S-K concerning securities authorized for issuance under equity compensation plans can be found under Item 12 of this Annual Report on Form 10-K.
Issuer Purchases of Equity Securities
The following table provides information about the Company’s purchases of equity securities that are registered by the Company pursuant to Section 12 of the Exchange Act for the three months ended December 29, 2018:
 
2018
 
(a) Total Number Of Shares Purchased
 
Average Price Paid Per Share
  
Total Number Of Shares Purchased As Part Of A Publicly Announced Plan
or Program
 
(b) Maximum Number Of Shares That May
Yet Be Purchased Under The Program
September 30 - November 3
 
7,366

 
$
122.04

  

 
11,500,000

November 4 - December 1
 

 
$

  

 
11,500,000

December 2 - December 29
 
89,899

 
$
129.85

  

 
11,500,000

Total
 
97,265

 
$
129.26

  

 
11,500,000

 
(a)
The shares of common stock in this column were deemed surrendered to the Company by participants in various benefit plans of the Company to satisfy the participants’ taxes related to vesting or delivery of time-vesting restricted share units under those plans.
(b)
On July 20, 2017, the Board of Directors approved a new repurchase program for up to 15.0 million shares of the Company’s common stock and terminated its previously approved repurchase program. As of December 29, 2018, the authorized shares available for repurchase under the new repurchase program totaled approximately 11.5 million shares. The currently authorized shares available for repurchase do not include approximately 3.6 million shares reserved and authorized for purchase under the Company’s previously approved repurchase program relating to a forward share purchase contract entered into in March 2015. Refer to Note J, Capital Stock, of the Notes to Consolidated Financial Statements in Item 8 for further discussion.


20



Stock Performance Graph
The following line graph compares the yearly percentage change in the Company’s cumulative total shareholder return for the last five years to that of the Standard & Poor’s (S&P) 500 Index and the S&P 500 Industrials Index. The Company has decided to use the S&P 500 Industrials Index, which is utilized by a number of the Company’s industrial peers, for the purpose of this disclosure.
grapha01.jpg
THE POINTS IN THE ABOVE TABLE ARE AS FOLLOWS:
2013
 
2014
 
2015
 
2016
 
2017
 
2018
Stanley Black & Decker
$
100.00

 
$
121.28

 
$
137.64

 
$
150.93

 
$
227.12

 
$
161.98

S&P 500
$
100.00

 
$
114.10

 
$
115.69

 
$
129.52

 
$
157.79

 
$
149.56

S&P 500 Industrials
$
100.00

 
$
112.75

 
$
116.07

 
$
127.87

 
$
156.91

 
$
150.95

The comparison assumes $100 invested at the closing price on December 27, 2013 in the Company’s common stock, S&P 500 Index, and S&P 500 Industrials Index. Total return assumes reinvestment of dividends.   


21



ITEM 6. SELECTED FINANCIAL DATA
Acquisitions and divestitures completed by the Company during the five-year period presented below affect comparability of results. Refer to Note E, Acquisitions, and Note T, Divestitures, of the Notes to Consolidated Financial Statements in Item 8 and prior year 10-K filings for further information.
(Millions of Dollars, Except Per Share Amounts)
 
2018 (a)
 
20171 (b)
 
20161
 
20151
 
2014 (c)
Net sales
 
$
13,982

 
$
12,967

 
$
11,594

 
$
11,172

 
$
11,339

Net earnings from continuing operations attributable to common shareowners
 
$
605

 
$
1,227

 
$
968

 
$
904

 
$
857

Net loss from discontinued operations(d)
 
$

 
$

 
$

 
$
(20
)
 
$
(96
)
Net Earnings Attributable to Common Shareowners
 
$
605

 
$
1,227

 
$
968

 
$
884

 
$
761

Basic earnings (loss) per share:
 
 
 
 
 
 
 
 
 
 
Continuing operations
 
$
4.06

 
$
8.20

 
$
6.63

 
$
6.10

 
$
5.49

Discontinued operations(d)
 
$

 
$

 
$

 
$
(0.14
)
 
$
(0.62
)
Total basic earnings per share
 
$
4.06

 
$
8.20

 
$
6.63

 
$
5.96

 
$
4.87

Diluted earnings (loss) per share:
 
 
 
 
 
 
 
 
 
 
Continuing operations
 
$
3.99

 
$
8.05

 
$
6.53

 
$
5.92

 
$
5.37

Discontinued operations(d)
 
$

 
$

 
$

 
$
(0.13
)
 
$
(0.60
)
Total diluted earnings per share
 
$
3.99

 
$
8.05

 
$
6.53

 
$
5.79

 
$
4.76

Percent of net sales (Continuing operations):
 
 
 
 
 
 
 
 
 
 
Cost of sales
 
65.3
%
 
63.1
%
 
63.2
%
 
63.6
%
 
63.8
%
Selling, general and administrative(e)
 
22.7
%
 
23.1
%
 
22.7
%
 
22.3
%
 
22.9
%
Other, net
 
2.1
%
 
2.1
%
 
1.6
%
 
2.0
%
 
2.1
%
Restructuring charges and asset impairments
 
1.1
%
 
0.4
%
 
0.4
%
 
0.4
%
 
0.2
%
Interest, net
 
1.5
%
 
1.4
%
 
1.5
%
 
1.5
%
 
1.4
%
Earnings before income taxes
 
7.3
%
 
11.8
%
 
10.6
%
 
10.3
%
 
9.6
%
Net earnings from continuing operations attributable to common shareowners
 
4.3
%
 
9.5
%
 
8.3
%
 
8.1
%
 
7.6
%
Balance sheet data:
 
 
 
 
 
 
 
 
 
 
Total assets
 
$
19,408

 
$
19,098

 
$
15,655

 
$
15,128

 
$
15,803

Long-term debt, including current maturities
 
$
3,822

 
$
3,806

 
$
3,806

 
$
3,797

 
$
3,800

Stanley Black & Decker, Inc.’s shareowners’ equity
 
$
7,836

 
$
8,302

 
$
6,374

 
$
5,816

 
$
6,429

Ratios:
 
 
 
 
 
 
 
 
 
 
Total debt to total capital
 
34.9
%
 
31.5
%
 
37.4
%
 
39.5
%
 
37.2
%
Income tax rate - continuing operations
 
40.7
%
 
19.7
%
 
21.3
%
 
21.6
%
 
20.9
%
Common stock data:
 
 
 
 
 
 
 
 
 
 
Dividends per share
 
$
2.58

 
$
2.42

 
$
2.26

 
$
2.14

 
$
2.04

Equity per basic share at year-end
 
$
53.07

 
$
55.20

 
$
42.80

 
$
39.11

 
$
41.34

Market price per share — high
 
$
175.91

 
$
170.03

 
$
125.78

 
$
110.17

 
$
97.36

Market price per share — low
 
$
108.45

 
$
115.75

 
$
90.14

 
$
90.51

 
$
75.64

Weighted-average shares outstanding (in 000’s):
 
 
 
 
 
 
 
 
 
 
Basic
 
148,919

 
149,629

 
146,041

 
148,234

 
156,090

Diluted
 
151,643

 
152,449

 
148,207

 
152,706

 
159,737

Other information:
 
 
 
 
 
 
 
 
 
 
Average number of employees
 
60,785

 
57,076

 
53,231

 
51,815

 
50,375

Shareowners of record at end of year
 
9,727

 
10,014

 
10,313

 
10,603

 
10,932

1 2017 and 2016 amounts have been recast as a result of the adoption of the new revenue and pension standards. 2015 Stanley Black & Decker, Inc.'s shareowners' equity includes a $4.3 million adjustment for the adoption of the new revenue standard for periods prior to fiscal year 2016. Impacts from the adoption of the new pension standard on periods prior to 2016 were not significant. Refer to Note A, Significant Accounting Policies, for further discussion.
 
(a)
The Company's 2018 results include $450 million of pre-tax charges related to acquisitions, an environmental remediation settlement, a non-cash fair value adjustment, a cost reduction program, an incremental freight charge related to a service provider's bankruptcy, and a loss related to a previously divested business. As a result, as a

22



percentage of Net sales, Cost of sales was 47 basis points higher, Selling, general, & administrative was 113 basis points higher, Other, net was 77 basis points higher, Restructuring charges and asset impairments was 84 basis points higher, and Earnings before income taxes was 322 basis points lower. The Company also recorded a net tax charge of $181 million, which is comprised of charges related to the Tax Cuts and Jobs Act ("the Act") partially offset by the tax benefit of the above pre-tax charges. Overall, the amounts described above resulted in a decrease to Net earnings attributable to common shareowners of $631 million (or $4.16 per diluted share). The Income tax rate - continuing operations was 247 basis points higher.
(b)
The Company's 2017 results include $156 million of pre-tax acquisition-related charges and a $264 million pre-tax gain on sales of businesses, primarily related to the divestiture of the mechanical security businesses. As a result, as a percentage of Net sales, Cost of sales was 36 basis points higher, Selling, general, & administrative was 29 basis points higher, Other, net was 45 basis points higher, Restructuring charges and asset impairments was 11 basis points higher, and Earnings before income taxes was 83 basis points higher. The net tax benefit of the acquisition-related charges and gain on sales of businesses was $7 million. Income taxes on continuing operations for 2017 also includes a one-time net tax charge of $24 million related to the Act. Overall, the acquisition-related charges, gain on sales of businesses, and one-time net tax charge related to the recently enacted U.S. tax legislation resulted in a net increase to the Company's 2017 net earnings from continuing operations attributable to common shareowners of $91 million (or $0.59 per diluted share).
(c)
The Company's 2014 results include $54 million of pre-tax charges related to merger and acquisition-related charges. As a result of these charges, net earnings attributable to common shareowners were reduced by $49 million (or $0.30 per diluted share). As a percentage of Net sales, Cost of sales was 2 basis points higher, Selling, general & administrative was 28 basis points higher, Other, net was 2 basis points higher, Earnings before income taxes was 48 basis points lower, and Net earnings attributable to common shareowners was 43 basis points lower. The Income tax rate - continuing operations was 53 basis points higher.
(d)
Discontinued operations in 2015 reflects a $20 million loss, or $0.13 per diluted share, primarily related to operating losses associated with the Security segment’s Spain and Italy operations (“Security Spain and Italy”), which were classified as held for sale in the fourth quarter of 2014 and subsequently sold in 2015. Amounts in 2014 reflect a $96 million loss, or $0.60 per diluted share, associated with Security Spain and Italy as well as two small businesses that were divested in 2014.
(e)
SG&A is inclusive of the Provision for Doubtful Accounts.



23



ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The financial and business analysis below provides information which the Company believes is relevant to an assessment and understanding of its consolidated financial position, results of operations and cash flows. This financial and business analysis should be read in conjunction with the Consolidated Financial Statements and related notes. All references to “Notes” in this Item 7 refer to the Notes to Consolidated Financial Statements included in Item 8 of this Annual Report.
The following discussion and certain other sections of this Annual Report on Form 10-K contain statements reflecting the Company’s views about its future performance that constitute “forward-looking statements” under the Private Securities Litigation Reform Act of 1995. These forward-looking statements are based on current expectations, estimates, forecasts and projections about the industry and markets in which the Company operates as well as management’s beliefs and assumptions. Any statements contained herein (including without limitation statements to the effect that Stanley Black & Decker, Inc. or its management “believes,” “expects,” “anticipates,” “plans” and similar expressions) that are not statements of historical fact should be considered forward-looking statements. These statements are not guarantees of future performance and involve certain risks, uncertainties and assumptions that are difficult to predict. There are a number of important factors that could cause actual results to differ materially from those indicated by such forward-looking statements. These factors include, without limitation, those set forth, or incorporated by reference, below under the heading “Cautionary Statements Under The Private Securities Litigation Reform Act Of 1995.” The Company does not intend to update publicly any forward-looking statements whether as a result of new information, future events or otherwise.
Strategic Objectives
The Company continues to pursue a growth and acquisition strategy, which involves industry, geographic and customer diversification to foster sustainable revenue, earnings and cash flow growth, and employ the following strategic framework in pursuit of its vision to reach $22 billion in revenue by 2022 while expanding its margin rate ("22/22 Vision"):
Continue organic growth momentum by utilizing the Stanley Fulfillment System ("SFS") 2.0 operating system, diversifying toward higher-growth, higher-margin businesses, and increasing the relative weighting of emerging markets;
Be selective and operate in markets where brand is meaningful, the value proposition is definable and sustainable through innovation, and global cost leadership is achievable; and
Pursue acquisitive growth on multiple fronts by building upon its existing global tools platform, expanding the Industrial platform in Engineered Fastening and Infrastructure, consolidating the commercial electronic security industry, and pursuing adjacencies with sound industrial logic.
Execution of the above strategy has resulted in approximately $9.4 billion of acquisitions since 2002 (excluding the Black & Decker merger), several divestitures, improved efficiency in the supply chain and manufacturing operations, and enhanced investments in organic growth, enabled by cash flow generation and increased debt capacity. In addition, the Company's continued focus on diversification and organic growth has resulted in improved financial results and an increase in its global presence. The Company also remains focused on increasing its presence in emerging markets, with a goal of generating greater than 20% of annual revenues from those markets over time, and leveraging SFS 2.0 to upgrade innovation and digital capabilities, maintain commercial and supply chain excellence, and focus on reducing SG&A, in part, through functional transformation. Lastly, the Company continues to make strides towards achieving its 22/22 Vision by becoming known as one of the world’s leading innovators, delivering top-quartile financial performance and elevating its commitment to social responsibility.
The Company’s long-term financial objectives remain as follows:

4-6% organic revenue growth;
10-12% total revenue growth;
10-12% total EPS growth (7-9% organically) excluding acquisition-related charges;
Free cash flow equal to, or exceeding, net income; and
Sustain 10+ working capital turns.
In terms of capital allocation, the Company remains committed, over time, to returning approximately 50% of free cash flow to shareholders through a strong and growing dividend as well as opportunistically repurchasing shares. The remaining free cash flow (approximately 50%) will be deployed towards acquisitions.

24



The following represents recent examples of the Company executing its strategic objectives:

Acquisitions and Other Transactions
On January 2, 2019, the Company acquired a 20 percent interest in MTD Holdings Inc. ("MTD"), a privately held global manufacturer of outdoor power equipment, for $234 million in cash.  With 2017 revenues of $2.4 billion, MTD manufactures and distributes gas-powered lawn tractors, zero turn mowers, walk behind mowers, snow throwers, trimmers, chain saws, utility vehicles and other outdoor power equipment. Under the terms of the agreement, the Company has the option to acquire the remaining 80 percent of MTD beginning on July 1, 2021 and ending on January 2, 2029. In the event the option is exercised, the companies have agreed to a valuation multiple based on MTD’s 2018 EBITDA, with an equitable sharing arrangement for future EBITDA growth. The investment in MTD increases the Company's presence in the $20 billion global lawn and garden segment and will allow the two companies to work together to pursue revenue and cost opportunities, improve operational efficiency, and introduce new and innovative products for professional and residential outdoor equipment customers, utilizing each company's respective portfolios of strong brands.
On April 2, 2018, the Company acquired Nelson Fastener Systems (“Nelson”) from the Doncasters Group for approximately $430 million. This acquisition is complementary to the Company's product offerings, enhances its presence in the general industrial end markets, expands its portfolio of highly-engineered fastening solutions, and will deliver cost synergies. The results of Nelson are being consolidated into the Industrial segment.  
On March 9, 2017, the Company acquired the Tools business of Newell Brands ("Newell Tools") for approximately $1.86 billion, which included the highly attractive industrial cutting, hand tool and power tool accessory brands IRWIN® and LENOX®. The acquisition enhanced the Company’s position within the global tools & storage industry and broadened the Company’s product offerings and solutions to customers and end-users, particularly within power tool accessories. The Newell Tools results have been consolidated into the Company's Tools & Storage segment.
On March 8, 2017, the Company purchased the Craftsman® brand from Sears Holdings Corporation (“Sears Holdings”) for an estimated cash purchase price of approximately $937 million on a discounted basis. The acquisition provided the Company with the rights to develop, manufacture and sell Craftsman®-branded products in non-Sears Holdings channels. The Company plans to significantly increase the availability of Craftsman®-branded products to consumers in previously underpenetrated channels, enhance innovation, and add manufacturing jobs in the U.S. to support growth. The Craftsman results have been consolidated into the Company's Tools & Storage segment.

Pending Acquisition

On August 6, 2018, the Company reached an agreement to acquire International Equipment Solutions Attachments Group ("IES Attachments"), a manufacturer of high quality, performance-driven heavy equipment attachment tools for off-highway applications. On January 29, 2019, the agreement was amended to exclude the mobile processors business. The Company expects the acquisition to further diversify the Company's presence in the industrial markets, expand its portfolio of attachment solutions and provide a meaningful platform for continued growth. This transaction is expected to close in the first half of 2019 subject to customary closing conditions, including regulatory approvals.

Refer to Note E, Acquisitions, for further discussion of the Company's acquisitions.

Divestitures

On February 22, 2017, the Company sold the majority of its mechanical security businesses, which included the commercial hardware brands of Best Access, phi Precision and GMT, for net proceeds of approximately $717 million. The sale allowed the Company to deploy capital in a more accretive and growth-oriented manner.

Refer to Note T, Divestitures, for further discussion of the Company's divestitures.

Certain Items Impacting Earnings

Throughout MD&A, the Company has provided a discussion of the outlook and results both inclusive and exclusive of acquisition-related charges, a non-cash fair value adjustment, gains or losses on sales of businesses, an environmental remediation settlement, charges associated with a cost reduction program, an incremental freight charge related to a service provider's bankruptcy, and tax charges primarily related to the Tax Cuts and Jobs Act ("the Act"). The results and measures, including gross profit and segment profit, on a basis excluding these amounts are considered relevant to aid analysis and understanding of the Company's results aside from the material impact of these items. These amounts are as follows:

25




2018

The Company reported $450 million in pre-tax charges during 2018, which were comprised of the following:

$66 million reducing Gross Profit primarily pertaining to amortization of the inventory step-up adjustment for the Nelson acquisition and an incremental freight charge recorded in the fourth quarter of 2018 due to nonperformance by a third-party service provider;
$158 million in SG&A primarily for integration-related costs, consulting fees, and a non-cash fair value adjustment;
$108 million in Other, net primarily related to deal transaction costs and the settlement with the Environmental Protection Agency ("EPA");
$1 million related to a previously divested business; and
$117 million in Restructuring charges which primarily related to a cost reduction program in the fourth quarter of 2018.
 
The Company also recorded a net tax charge of $181 million, which is comprised of charges related to the Act partially offset by the tax benefit of the above pre-tax charges. The above amounts resulted in net after-tax charges of $631 million, or $4.16 per diluted share.

2017

The Company reported $156 million in pre-tax acquisition-related charges, which were comprised of the following:

$47 million reducing Gross Profit primarily pertaining to amortization of the inventory step-up adjustment for the Newell Tools acquisition;
$38 million in SG&A primarily for integration-related costs and consulting fees;
$58 million in Other, net primarily for deal transaction and consulting costs; and
$13 million in Restructuring charges pertaining to facility closures and employee severance.
 
The Company also reported a $264 million pre-tax gain on sales of businesses in 2017, primarily relating to the sale of the majority of the mechanical security businesses. The net tax benefit of the acquisition-related charges and gain on sales of businesses was $7 million. Furthermore, in the fourth quarter of 2017, the Company recorded a $24 million net tax charge relating to the Act.

The acquisition-related charges, gain on sales of businesses, and net tax charge relating to the Act resulted in a net after-tax gain of $91 million, or $0.59 per diluted share.

Driving Further Profitable Growth by Fully Leveraging Our Core Franchises

Each of the Company's franchises share common attributes: they have world-class brands and attractive growth characteristics, they are scalable and defensible, they can differentiate through innovation, and they are powered by our SFS 2.0 operating system.
The Tools & Storage business is the tool company to own, with strong brands, proven innovation, global scale, and a broad offering of power tools, hand tools, accessories, and storage & digital products across many channels in both developed and developing markets.
The Engineered Fastening business is a highly profitable, GDP+ growth business offering highly engineered, value-added innovative solutions with recurring revenue attributes and global scale.
The Security business, with its attractive recurring revenue, presents a significant margin accretion opportunity over the longer term and has historically provided a stable revenue stream through economic cycles, is a gateway into the digital world and an avenue to capitalize on rapid digital changes. Security has embarked on a business transformation which will apply technology to lower its cost to serve and create new offerings for its small to medium enterprise and large key account customers.
While diversifying the business portfolio through strategic acquisitions remains important, management recognizes that the core franchises described above are important foundations that continue to provide strong cash flow and growth prospects. Management is committed to growing these businesses through innovative product development, brand support, continued investment in emerging markets and a sharp focus on global cost-competitiveness.

26



Continuing to Invest in the Stanley Black & Decker Brands
The Company has a strong portfolio of brands associated with high-quality products including STANLEY®, BLACK+DECKER®, DEWALT®, FLEXVOLT®, IRWIN®, LENOX®, CRAFTSMAN®, PORTER-CABLE®, BOSTITCH®, PROTO®, MAC TOOLS®, FACOM®, AeroScout®, Powers®, LISTA®, SIDCHROME®, Vidmar®, SONITROL®, and GQ®. Among the Company's most valuable assets, the STANLEY®, BLACK+DECKER® and DEWALT® brands are recognized as three of the world's great brands, while the CRAFTSMAN® brand is recognized as a premier American brand.
During 2018, the STANLEY®, DEWALT® and CRAFTSMAN® brands had prominent signage in Major League Baseball ("MLB") stadiums appearing in many MLB games. The Company has also maintained long-standing NASCAR and NHRA racing sponsorships, which provided brand exposure during nearly 60 events in 2018 with the STANLEY®, DEWALT®, CRAFTSMAN®, IRWIN® and MAC TOOLS® brands. The Company also advertises in the English Premier League, which is the number one soccer league in the world, featuring STANLEY®, STANLEY Security, BLACK+DECKER® and DEWALT® brands to a global audience. Starting in 2014, the Company became a sponsor for one of the world’s most popular football clubs, FC Barcelona ("FCB"), including player image rights, hospitality assets and stadium signage. In 2018, the Company was announced as the first ever shirt sponsor for the FCB Women's team in support of its commitment to global diversity and inclusion. Also in 2018, the Company joined forces by sponsoring the Envision Virgin Racing Formula E team, in support of the Company's commitment to sustainability and the future of electric mobility.
The above marketing initiatives highlight the Company's strong emphasis on brand building and support, which has resulted in more than 300 billion brand impressions via digital and traditional advertising annually and a steady improvement across the spectrum of brand awareness measures. The Company will continue allocating its brand and advertising spend wisely to capture the emerging digital landscape, whilst continuing to evolve proven marketing programs to deliver famous global brands that are deeply committed to societal improvement, along with transformative technologies to build relevant and meaningful 1:1 customer, consumer, employee and shareholder relationships in support of the Company's 22/22 Vision.
The Stanley Fulfillment System and SFS 2.0
Over the years, the Company has successfully leveraged SFS to drive efficiency throughout the supply chain and improve working capital performance in order to generate incremental free cash flow. Historically, SFS focused on streamlining operations, which helped reduce lead times, realize synergies during acquisition integrations, and mitigate material and energy price inflation. In 2015, the Company launched a refreshed and revitalized SFS operating system, entitled SFS 2.0, to drive from a more programmatic growth mentality to a true organic growth culture by more deeply embedding breakthrough innovation and commercial excellence into its businesses, and at the same time, becoming a significantly more digitally-enabled enterprise.
Leveraging SFS 2.0, the Company is building a culture in which it strives to become known as one of the world’s great innovative companies by embracing the current environment of rapid innovation and digital transformation. To pursue faster innovation, the Company is building a vast ecosystem to remain aware of and open to new technologies and advances by leveraging both internal initiatives and external partnerships. The innovation ecosystem and focus on digital disruption will allow the Company to apply innovation to its core processes in manufacturing and back office functions to reduce operating costs and inefficiencies, develop core and breakthrough product innovations within each of its businesses, and pursue disruptive business models to either push into new markets or change existing business models before competition or new market entrants capture the opportunity. The Company has already made progress towards these objectives, as evidenced by the creation of breakthrough innovation teams in each business, the Stanley Ventures group, which invests capital in new and emerging start-ups in core focus areas, the Techstars partnership, which selects start-ups from around the world with the goal of bringing breakthrough manufacturing technologies to market, and a Silicon Valley based team, which is building its own set of disruptive initiatives and exploring new business models.

The Company has made a significant commitment to SFS 2.0 and management believes that its success will be characterized by continued organic growth in the 4-6% range as well as expanded operating margin rates over the next 3 to 5 years as the Company leverages the growth and reduces structural SG&A levels.

SFS 2.0 is transforming the Company by focusing its employees on the following five key pillars:
Digital Excellence uses the power of digital to contemporize, be disruptive, and create value throughout the Company's array of products, processes and business models. Digital Excellence means leveraging the power of emerging technologies across the Company's businesses to connected devices, the Internet of Things ("IoT"), and big data, as well as social and mobile, even more than what is being done today. Digital is penetrating all aspects of the organization and feeds into and supports the other elements of SFS 2.0 - enabling better asset efficiency through Core

27



SFS / Industry 4.0, greater cost effectiveness via the Company's support functions, and improving revenues and margins via customer-facing opportunities.
Commercial Excellence is about how the Company becomes more effective and efficient in its customer-facing processes resulting in continued share gains and margin expansion throughout its businesses. The Company views Commercial Excellence as world-class execution across seven areas: customer insights, innovation and portfolio management, pricing and promotion, brand and marketing, sales force deployment and effectiveness, channel programs, and the customer experience.
Breakthrough Innovation is aimed at developing a culture to identify and commercialize market disrupting innovations, each with revenue generation potential greater than $100 million annually. The Company's focus remains on utilizing technologies to come up with major breakthroughs in the industries in which the Company operates which, when combined with its existing strong core innovation machine, will drive outsized share gains and margin expansion.
Core SFS / Industry 4.0, which targets cost and asset efficiency, remains as the foundation for the Company's operating system and has yielded significant advances in improving working capital turns and free cash flow generation. The five operating principles encompassed by Core SFS / Industry 4.0, which work in concert, include: sales and operations planning ("S&OP"), operational lean, complexity reduction, global supply management, and order-to-cash excellence. The Company plans to continue leveraging these principles to further enhance the Company's already strong asset efficiency performance. Additionally, the Company is making investments behind the adoption of Industry 4.0 and advancing the Company's capabilities surrounding the automation of manufacturing that includes IoT, cloud computing, Artificial Intelligence ("AI"), 3-D printing, robotics, and advanced materials, among others.
Functional Transformation takes a clean-sheet approach to redesigning the Company's key support functions such as Finance, HR, IT and others, which although highly effective, after roughly a hundred acquisitions are not as efficient as they can be based on external benchmarks. This presents the Company with an opportunity to reduce complexity in order to realize the benefits from scale, reduce its SG&A as a percent of sales, and become a cost effectiveness enabler with the side benefit of helping to fund the other aspects of SFS 2.0 over the long term and to support margin expansion.
SFS 2.0 will serve as a powerful value driver in the years ahead, feeding the Company's innovation ecosystem, embracing outstanding commercial and supply chain excellence, embedding digital into the various business models, and funding it with world-class functional efficiency. Taken together, the five pillars above will directly support achievement of the Company's long-term financial objectives, including its 22/22 Vision, and further enable its shareholder-friendly capital allocation approach, which has served the Company well in the past and will continue to do so in the future.
Outlook for 2019
This outlook discussion is intended to provide broad insight into the Company’s near-term earnings and cash flow generation prospects. The Company expects 2019 diluted earnings per share to approximate $7.45 to $7.65 ($8.45 to $8.65 excluding acquisition-related and other charges), and free cash flow conversion, defined as free cash flow divided by net income, to approximate 85% to 90%. The 2019 outlook for adjusted diluted earnings per share assumes approximately $0.30 to $0.40 of accretion related to organic sales volume growth; approximately $1.05 of accretion due to the benefit from the cost reduction program partially offset by modest investments; approximately $0.10 of accretion related to the benefits from the MTD partnership and lower shares partially offset by higher interest expense; approximately $0.90 to $1.00 of dilution from incremental tariffs, commodity inflation, and currency partially offset by pricing actions; and approximately $0.15 of dilution due to an expected tax rate of approximately 17.5%.




    

28



RESULTS OF OPERATIONS
Below is a summary of the Company’s operating results at the consolidated level, followed by an overview of business segment performance. Certain amounts reported in the previous years have been recast as a result of the retrospective adoption of new accounting standards in the first quarter of 2018. Refer to Note A, Significant Accounting Policies, for further discussion.
Terminology: The term “organic” is utilized to describe results aside from the impacts of foreign currency fluctuations, acquisitions during their initial 12 months of ownership, and divestitures. This ensures appropriate comparability to operating results of prior periods.
Net Sales: Net sales were $13.982 billion in 2018 compared to $12.967 billion in 2017, representing an increase of 8% with strong organic growth of 5%. Acquisitions, primarily Newell Tools and Nelson, increased sales by 3%. Tools & Storage net sales increased 9% compared to 2017 due to strong organic growth of 7%, fueled by solid growth across all regions, and acquisition growth of 2%. Industrial net sales increased 11% compared to 2017 primarily due to acquisition growth of 9% and favorable currency of 2%. Security net sales increased 2% compared to 2017 due to increases of 1% in price, 3% in small bolt-on commercial electronic security acquisitions and 1% in foreign currency, partially offset by declines of 1% from the sale of the majority of the mechanical security businesses and 2% from lower volumes.
Net sales were $12.967 billion in 2017 compared to $11.594 billion in 2016, representing an increase of 12% fueled by strong organic growth of 7%. Acquisitions, primarily Newell Tools, and foreign currency increased sales by 7% and 1%, respectively, while the impact of divestitures decreased sales by 3%. Tools & Storage net sales increased 19% compared to 2016 due to strong innovation-fueled organic growth of 9%, with solid growth across all regions, and acquisition growth of 10%. Industrial net sales increased 6% relative to 2016 due to a 6% increase in sales volume, which was mainly driven by strong automotive system shipments in the Engineered Fastening business and successful commercial actions and higher inspection and onshore pipeline project activity in the Infrastructure business. Net sales in the Security segment decreased 8% compared to 2016 primarily due to a 12% decline from the sale of the majority of the mechanical security businesses, which more than offset increases from organic growth and small bolt-on commercial electronic security acquisitions of 1% and 3%, respectively.
Gross Profit: The Company reported gross profit of $4.851 billion, or 34.7% of net sales, in 2018 compared to $4.778 billion, or 36.9% of net sales, in 2017. Acquisition-related and other charges, which reduced gross profit, were $65.7 million in 2018 and $46.8 million in 2017. Excluding these charges, gross profit was 35.2% of net sales in 2018, compared to 37.2% in 2017, as volume leverage, productivity and price were more than offset by external headwinds, including commodity inflation, foreign exchange and tariffs.
The Company reported gross profit of $4.778 billion, or 36.9% of net sales, in 2017 compared to $4.268 billion, or 36.8% of net sales, in 2016. Excluding acquisition-related charges of $46.8 million, which primarily related to the amortization of the inventory step-up adjustment for the Newell Tools acquisition, gross profit was 37.2% of net sales in 2017. The year-over-year increase in the profit rate was attributable to volume leverage, productivity and cost control, which more than offset increasing commodity inflation and the impact from the mechanical security business divestiture.
SG&A Expense: Selling, general and administrative expenses, inclusive of the provision for doubtful accounts (“SG&A”), were $3.172 billion, or 22.7% of net sales, in 2018 compared to $2.999 billion, or 23.1% of net sales, in 2017. Within SG&A, acquisition-related and other charges totaled $157.8 million in 2018 and $37.7 million in 2017. Excluding these charges, SG&A was 21.6% of net sales in 2018 compared to 22.8% in 2017, due primarily to prudent cost management and volume leverage.
SG&A expenses were $2.999 billion, or 23.1% of net sales, in 2017 compared to $2.633 billion, or 22.7% of net sales, in 2016. Excluding acquisition-related charges of $37.7 million, SG&A was 22.8% of net sales in 2017. The slight year-over-year increase was driven by investments in growth initiatives partially offset by continued tight cost management.
Distribution center costs (i.e. warehousing and fulfillment facility and associated labor costs) are classified within SG&A. This classification may differ from other companies who may report such expenses within cost of sales. Due to diversity in practice, to the extent the classification of these distribution costs differs from other companies, the Company’s gross margins may not be comparable. Such distribution costs classified in SG&A amounted to $316.0 million in 2018, $279.8 million in 2017 and $235.3 million in 2016.
Corporate Overhead: The corporate overhead element of SG&A, which is not allocated to the business segments, amounted to $202.8 million, or 1.5% of net sales, in 2018, $217.4 million, or 1.7% of net sales, in 2017 and $190.9 million, or 1.6% of net sales, in 2016. Excluding acquisition-related charges of $12.7 million and $0.7 million in 2018 and 2017, respectively, the corporate overhead element of SG&A was 1.4% of net sales in 2018 compared to 1.7% of net sales in 2017 reflecting cost management. The increase in 2017 compared to 2016 was primarily due to investments in SFS 2.0 initiatives.


29



Other, net: Other, net totaled $287.0 million in 2018 compared to $269.2 million in 2017 and $185.9 million in 2016. Excluding the aforementioned EPA settlement charge and acquisition-related charges which totaled $108.1 million in 2018 and acquisition-related charges of $58.2 million in 2017, Other, net totaled $178.9 million and $211.0 million in 2018 and 2017, respectively. The year-over-year decrease in 2018 was driven by an environmental remediation charge of $17 million in 2017 relating to a legacy Black & Decker site and a favorable resolution of a prior claim in 2018, which more than offset higher intangible amortization expense in 2018. The increase in 2017 compared to 2016 was primarily driven by higher amortization expense related to the 2017 acquisitions, negative impacts of foreign currency and the environmental remediation charge of $17 million discussed above.

Refer to Note S, Contingencies, for additional information regarding the EPA settlement discussed above.

Loss (Gain) on Sales of Businesses: During 2018, the Company reported a $0.8 million pre-tax loss relating to a previously divested business. During 2017, the Company reported a $264.1 million pre-tax gain primarily relating to the sale of the majority of the Company's mechanical security businesses, as previously discussed.

Pension Settlement: Pension settlement of $12.2 million in 2017 reflects losses previously reported in Accumulated other comprehensive loss related to a non-U.S. pension plan for which the Company settled its obligation by purchasing an annuity and making lump sum payments to participants.

Interest, net: Net interest expense in 2018 was $209.2 million compared to $182.5 million in 2017 and $171.3 million in 2016. The increase in 2018 compared to 2017 was primarily due to higher interest rates and higher average balances relating to the Company's U.S. commercial paper borrowings partially offset by higher interest income. The increase in net interest expense in 2017 versus 2016 was primarily due to the termination of interest rate swaps in June 2016 hedging the Company's fixed rate debt.

Income Taxes: The Company's effective tax rate was 40.7% in 2018, 19.7% in 2017, and 21.3% in 2016. The 2018 effective tax rate includes net charges associated with the Act, which primarily related to the re-measurement of existing deferred tax balances, adjustments to the one-time transition tax, and the provision of deferred taxes on unremitted foreign earnings and profits for which the Company no longer asserts indefinite reinvestment. Excluding the impacts of the net charge related to the Act as well as the acquisition-related and other charges previously discussed, the effective tax rate in 2018 was 16.0%.  This effective tax rate differs from the U.S. statutory tax rate primarily due to a portion of the Company's earnings being realized in lower-taxed foreign jurisdictions and the favorable effective settlements of income tax audits.

The 2017 effective tax rate included a one-time net charge relating to the provisional amounts recorded associated with the U.S. tax legislation enacted in December 2017. The net charge primarily related to the re-measurement of existing deferred tax balances and the one-time transition tax. Excluding the impact of the divestitures, acquisition-related charges, and the net charge related to the Act, the effective tax rate was 20.0% in 2017.  This effective tax rate differed from the U.S. statutory rate primarily due to a portion of the Company's earnings being realized in lower-taxed foreign jurisdictions, the favorable settlement of certain income tax audits, and the acceleration of certain tax credits resulting in a tax benefit. The effective tax rate in 2016 differed from the U.S. statutory rate primarily due to a portion of the Company's earnings being realized in lower-taxed foreign jurisdictions, adjustments to tax positions relating to undistributed foreign earnings, and reversals of valuation allowances for certain foreign and U.S. state net operating losses, which had become realizable. 

Business Segment Results
The Company’s reportable segments are aggregations of businesses that have similar products, services and end markets, among other factors. The Company utilizes segment profit which is defined as net sales minus cost of sales and SG&A inclusive of the provision for doubtful accounts (aside from corporate overhead expense), and segment profit as a percentage of net sales to assess the profitability of each segment. Segment profit excludes the corporate overhead expense element of SG&A, other, net (inclusive of intangible asset amortization expense), loss (gain) on sales of businesses, pension settlement, restructuring charges and asset impairments, interest income, interest expense, and income taxes. Corporate overhead is comprised of world headquarters facility expense, cost for the executive management team and expenses pertaining to certain centralized functions that benefit the entire Company but are not directly attributable to the businesses, such as legal and corporate finance functions. Refer to Note F, Goodwill and Intangible Assets, and Note O, Restructuring Charges and Asset Impairments, for the amount of intangible asset amortization expense and net restructuring charges and asset impairments, respectively, attributable to each segment.


30



The Company classifies its business into three reportable segments, which also represent its operating segments: Tools & Storage, Industrial and Security.
Tools & Storage:
The Tools & Storage segment is comprised of the Power Tools & Equipment ("PTE") and Hand Tools, Accessories & Storage ("HTAS") businesses. The PTE business includes both professional and consumer products. Professional products include professional grade corded and cordless electric power tools and equipment including drills, impact wrenches and drivers, grinders, saws, routers and sanders, as well as pneumatic tools and fasteners including nail guns, nails, staplers and staples, concrete and masonry anchors. Consumer products include corded and cordless electric power tools sold primarily under the BLACK+DECKER® brand, lawn and garden products, including hedge trimmers, string trimmers, lawn mowers, edgers and related accessories, and home products such as hand-held vacuums, paint tools and cleaning appliances. The HTAS business sells hand tools, power tool accessories and storage products. Hand tools include measuring, leveling and layout tools, planes, hammers, demolition tools, clamps, vises, knives, saws, chisels and industrial and automotive tools. Power tool accessories include drill bits, screwdriver bits, router bits, abrasives, saw blades and threading products. Storage products include tool boxes, sawhorses, medical cabinets and engineered storage solution products.
(Millions of Dollars)
2018
 
2017
 
2016
Net sales
$
9,814

 
$
9,045

 
$
7,619

Segment profit
$
1,393

 
$
1,439

 
$
1,258

% of Net sales
14.2
%
 
15.9
%
 
16.5
%
Tools & Storage net sales increased $769.0 million, or 9%, in 2018 compared to 2017. Organic sales increased 7%, with a 6% increase in volume and 1% increase in price, reflecting strong growth in each of the regions, and acquisitions, primarily Newell Tools, increased net sales by 2%. North America growth was driven by new product innovation, the rollout of the Craftsman brand and price realization. Europe growth was supported by new products and successful commercial actions. The growth in emerging markets was driven by mid-price-point product releases, e-commerce strategies and pricing actions.

Segment profit amounted to $1.393 billion, or 14.2% of net sales, in 2018 compared to $1.439 billion, or 15.9% of net sales, in 2017. Excluding acquisition-related and other charges of $142.6 million and $81.8 million in 2018 and 2017, respectively, segment profit amounted to 15.6% of net sales in 2018 compared to 16.8% in 2017, as the benefits from volume leverage, pricing and cost control were more than offset by the impacts from currency, commodity inflation and tariffs.
Tools & Storage net sales increased $1.426 billion, or 19%, in 2017 compared to 2016. Organic sales increased 9%, with strong organic growth in each of the regions, and acquisitions, primarily Newell, increased net sales by 10%. North America growth was supported by share gains from strong commercial execution and market-leading innovation, including sales from the FLEXVOLT® system, as well as a healthy U.S. tool market. Europe delivered above-market organic growth enabled by successful commercial actions and new product launches. The strong organic growth in emerging markets was supported by mid-price-point product releases, higher e-commerce volumes and strong commercial execution. Foreign currency increased sales by 1% while the sales of two small businesses in 2017 resulted in a 1% decrease.

Segment profit amounted to $1.439 billion, or 15.9% of net sales, in 2017 compared to $1.258 billion, or 16.5% of net sales, in 2016. Excluding acquisition-related charges of $81.8 million, segment profit amounted to 16.8% of net sales in 2017 compared to 16.5% in 2016, as volume leverage and productivity more than offset growth investments and increased commodity inflation.
Industrial:
The Industrial segment is comprised of the Engineered Fastening and Infrastructure businesses. The Engineered Fastening business primarily sells engineered fastening products and systems designed for specific applications. The product lines include blind rivets and tools, blind inserts and tools, drawn arc weld studs and systems, engineered plastic and mechanical fasteners, self-piercing riveting systems, precision nut running systems, micro fasteners, and high-strength structural fasteners. The Infrastructure business consists of the Oil & Gas and Hydraulics businesses. The Oil & Gas business sells and rents custom pipe handling, joint welding and coating equipment used in the construction of large and small diameter pipelines, and provides pipeline inspection services. The Hydraulics business sells hydraulic tools and accessories.

31



(Millions of Dollars)
2018
 
2017
 
2016
Net sales
$
2,188

 
$
1,974

 
$
1,864

Segment profit
$
320

 
$
346

 
$
300

% of Net sales
14.6
%
 
17.5
%
 
16.1
%
Industrial net sales increased $213.5 million, or 11%, in 2018 compared to 2017, due to acquisition growth of 9% and favorable foreign currency of 2%. Engineered Fastening organic revenues increased 1% due primarily to industrial and automotive fastener penetration gains which were partially offset by the expected impact from lower automotive system shipments. Infrastructure organic revenues were down 1% due to anticipated lower pipeline project activity in the Oil & Gas business, partially offset by volume growth within the Hydraulics business.

Segment profit totaled $319.8 million, or 14.6% of net sales, in 2018 compared to $345.9 million, or 17.5% of net sales, in 2017. Excluding acquisition-related and other charges of $26.0 million in 2018, segment profit amounted to 15.8% of net sales in 2018 compared to 17.5% in 2017, as productivity gains and cost control were more than offset by commodity inflation and the modestly dilutive impact from the Nelson acquisition.

Industrial net sales increased $110.3 million, or 6%, in 2017 compared to 2016, due to a 6% increase in organic sales. Engineered Fastening organic sales increased 4% as strong automotive system shipments and volume growth in general industrial markets more than offset lower volumes within electronics. Infrastructure organic sales increased 12% due to successful commercial actions and improved market conditions in the Hydraulics business and higher inspection and North American onshore pipeline project activity in the Oil & Gas business.

Segment profit totaled $345.9 million, or 17.5% of net sales, in 2017 compared to $300.1 million, or 16.1% of net sales, in 2016. The year-over-year increase in segment profit rate was primarily due to volume leverage, productivity gains and cost control.

Security:
The Security segment is comprised of the Convergent Security Solutions ("CSS") and the Mechanical Access Solutions ("MAS") businesses. The CSS business designs, supplies and installs commercial electronic security systems and provides electronic security services, including alarm monitoring, video surveillance, fire alarm monitoring, systems integration and system maintenance. Purchasers of these systems typically contract for ongoing security systems monitoring and maintenance at the time of initial equipment installation. The business also sells healthcare solutions, which include asset tracking, infant protection, pediatric protection, patient protection, wander management, fall management, and emergency call products. The MAS business primarily sells automatic doors.
(Millions of Dollars)
2018
 
2017
 
2016
Net sales
$
1,981

 
$
1,947

 
$
2,110

Segment profit
$
169

 
$
212

 
$
268

% of Net sales
8.5
%
 
10.9
%
 
12.7
%
Security net sales increased $33.3 million, or 2%, in 2018 compared to 2017, primarily due to increases of 1% in price, 3% in small bolt-on commercial electronic security acquisitions and 1% in foreign currency, partially offset by declines of 1% from the sale of the majority of the mechanical security businesses and 2% from lower volumes. Organic sales for North America decreased 1% as higher volumes within automatic doors were offset by lower installations in commercial electronic security. Europe declined 1% organically as strength within the Nordics was offset by weakness in the U.K. and France.
Segment profit amounted to $169.3 million, or 8.5% of net sales, in 2018 compared to $211.7 million, or 10.9% of net sales, in 2017. Excluding acquisition-related and other charges of $42.2 million and $2.0 million in 2018 and 2017, respectively, segment profit amounted to 10.7% of net sales in 2018 compared to 11.0% in 2017. The year-over-year change in segment profit rate reflects investments to support business transformation in commercial electronic security and the impact from the sale of the majority of the mechanical security business, partially offset by a continued focus on cost containment.
Security net sales decreased $163.0 million, or 8%, in 2017 compared to 2016, primarily due to a 12% decline from the sale of the majority of the mechanical security businesses. Organic sales and small bolt-on commercial electronic security acquisitions provided increases of 1% and 3%, respectively. North America organic sales increased 2% on higher installation volumes within the commercial electronic security and automatic doors businesses and growth within healthcare. Europe organic growth was relatively flat as strength within the U.K. and the Nordics was mostly offset by anticipated ongoing weakness in France.


32



Segment profit amounted to $211.7 million, or 10.9% of net sales, in 2017 compared to $267.9 million, or 12.7% of net sales, in 2016. Excluding acquisition-related charges of $2.0 million in 2017, segment profit amounted to 11.0% of net sales in 2017 compared to 12.7% in 2016. The decrease in the 2017 segment profit rate reflected an approximate 90 basis point decline related to the sale of the mechanical security businesses, as well as impacts from mix and funding growth investments.

RESTRUCTURING ACTIVITIES
A summary of the restructuring reserve activity from December 30, 2017 to December 29, 2018 is as follows:
(Millions of Dollars)
12/30/2017
 
Net Additions
 
Usage
 
Currency
 
12/29/2018
Severance and related costs
$
20.0

 
$
151.0

 
$
(64.1
)
 
$
(1.2
)
 
$
105.7

Facility closures and asset impairments
3.2

 
9.3

 
(9.4
)
 

 
3.1

Total
$
23.2

 
$
160.3

 
$
(73.5
)
 
$
(1.2
)
 
$
108.8

During 2018, the Company recognized net restructuring charges and asset impairments of $160.3 million, which primarily relates to the cost reduction program in the fourth quarter of 2018. This amount reflects $151.0 million of net severance charges associated with the reduction of 4,184 employees and $9.3 million of facility closure and other restructuring costs. The Company expects the 2018 actions to result in annual net cost savings of approximately $230 million by the end of 2019.
The majority of the $108.8 million of reserves remaining as of December 29, 2018 is expected to be utilized within the next twelve months.
During 2017, the Company recognized net restructuring charges and asset impairments of $51.5 million. This amount reflected $40.6 million of net severance charges associated with the reduction of 1,584 employees and $10.9 million of facility closure and other restructuring costs. The 2017 actions resulted in annual net cost savings of approximately $45 million in 2018, primarily in the Tools & Storage and Security segments.
During 2016, the Company recognized net restructuring charges and asset impairments of $49.0 million. This amount reflected $27.3 million of net severance charges associated with the reduction of 1,326 employees. The Company also recognized $11.0 million of facility closure costs and $10.7 million of asset impairments. The 2016 actions resulted in annual net cost savings of approximately $20 million in each segment.
Segments: The $160 million of net restructuring charges and asset impairments for the year ended December 29, 2018 includes: $80 million pertaining to the Tools & Storage segment; $30 million pertaining to the Industrial segment; $36 million pertaining to the Security segment; and $14 million pertaining to Corporate.
The anticipated annual net cost savings of approximately $230 million related to the 2018 restructuring actions include: $115 million pertaining to the Tools & Storage segment; $30 million pertaining to the Industrial segment; $55 million relating to the Security segment; and $30 million relating to Corporate.

FINANCIAL CONDITION
Liquidity, Sources and Uses of Capital: The Company’s primary sources of liquidity are cash flows generated from operations and available lines of credit under various credit facilities. Below is a summary of the Company’s cash flow results. Certain amounts reported in the previous years have been recast as a result of the adoption of new accounting standards in the first quarter of 2018. Refer to Note A, Significant Accounting Policies, for further discussion.
Operating Activities: Cash flows provided by operations were $1.261 billion in 2018 compared to $669 million in 2017. As discussed further in Note A, Significant Accounting Policies, operating cash flows in 2017 have decreased by approximately $750 million as a result of the retrospective adoption of new cash flow standards in the first quarter of 2018. Excluding the impact of the new standards, cash flows provided by operations in 2018 decreased year-over-year primarily due to higher income tax payments and higher payments associated with acquisition-related and other charges.
In 2017, cash flows from operations were $669 million compared to $1.186 billion in 2016. Excluding the impacts of the new cash flow standards described above, operating cash flows in 2017 decreased slightly compared to 2016 due primarily to higher cash outflows from working capital to support outsized organic growth in the Tools & Storage segment, partially offset by higher earnings excluding the impacts of non-cash items (gain on sales of businesses and amortization of inventory step-up).
Free Cash Flow: Free cash flow, as defined in the table below, was $769 million in 2018 compared to $226 million in 2017 and $839 million in 2016. Excluding the retrospective impacts of the previously discussed new cash flow standards adopted in the first quarter of 2018, free cash flow totaled $976 million in 2017 and $1.138 billion in 2016. Management considers free cash

33



flow an important indicator of its liquidity, as well as its ability to fund future growth and provide dividends to shareowners. Free cash flow does not include deductions for mandatory debt service, other borrowing activity, discretionary dividends on the Company’s common stock and business acquisitions, among other items.
(Millions of Dollars)
2018
 
2017 1
 
2016 1
Net cash provided by operating activities
$
1,261

 
$
669

 
$
1,186

Less: capital and software expenditures
(492
)
 
(443
)
 
(347
)
Free cash flow
$
769

 
$
226

 
$
839

1 Certain amounts reported in the previous years have been recast as a result of the adoption of new accounting standards in the first quarter of 2018. Refer to Note A, Significant Accounting Policies, for further discussion.
Investing Activities: Cash flows used in investing activities totaled $989 million in 2018, primarily due to business acquisitions of $525 million, mainly related to the Nelson acquisition, and capital and software expenditures of $492 million. The increase in capital and software expenditures in 2018 was primarily due to technology-related and capacity investments to support the Company's strong organic growth and its SFS 2.0 initiatives.
Cash flows used in investing activities in 2017 totaled $1.567 billion, which primarily consisted of business acquisitions of $2.584 billion, mainly related to the Newell Tools and Craftsman acquisitions, and capital and software expenditures of $443 million, partially offset by proceeds of $757 million from sales of businesses and $705 million from the deferred purchase price receivable related to an accounts receivable sales program, which was terminated in February 2018. The increase in capital and software expenditures in 2017 was due to growth in the Company's supply chain and investments related to functional transformation.
Cash flows provided by investing activities in 2016 totaled $61 million, which primarily consisted of $345 million of proceeds from the deferred purchase price receivable related to the terminated accounts receivable sales program discussed above and net investment hedge settlements of $105 million, partially offset by capital and software expenditures of $347 million. The proceeds from net investment hedge settlements were primarily driven by the significant fluctuations in foreign currency rates during 2016 associated with foreign exchange contracts hedging a portion of the Company's pound sterling, Canadian dollar, and Euro denominated net investments.
Financing Activities: Cash flows used in financing activities totaled $562 million in 2018 due primarily to the repurchase of common shares for $527 million and cash dividend payments of $385 million, partially offset by $433 million of net proceeds from short-term borrowings under the Company's commercial paper program.
Cash flows provided by financing activities totaled $295 million in 2017 primarily due to $726 million in proceeds from the issuance of equity units, partially offset by $363 million of cash payments for dividends and $77 million of net repayments of short-term borrowings under the Company's commercial paper program.
Cash flows used in financing activities in 2016 totaled $433 million, primarily due to share repurchases of $374 million, cash payments for dividends of $331 million, and the settlement of the October 2014 forward share purchase contract for $147 million, partially offset by proceeds from issuances of common stock of $419 million, which mainly related to the issuance of 3.5 million shares associated with the settlement of the 2013 Equity Purchase Contracts.
Fluctuations in foreign currency rates negatively impacted cash by $54 million in 2018 due to the strengthening of the U.S. Dollar against the Company's other currencies. Foreign currency positively impacted cash by $81 million in 2017 and negatively impacted cash by $102 million in 2016 due to movements in the U.S. Dollar against other currencies.
Refer to Note H, Long-Term Debt and Financing Arrangements, and Note J, Capital Stock, for further discussion regarding the Company's debt and equity arrangements.
Credit Ratings and Liquidity:
The Company maintains strong investment grade credit ratings from the major U.S. rating agencies on its senior unsecured debt (S&P A, Fitch A-, Moody's Baa1), as well as its commercial paper program (S&P A-1, Fitch F2, Moody's P-2). There have been no changes to any of the ratings during 2018.  Failure to maintain strong investment grade rating levels could adversely affect the Company’s cost of funds, liquidity and access to capital markets, but would not have an adverse effect on the Company’s ability to access its existing committed credit facilities.
Cash and cash equivalents totaled $289 million as of December 29, 2018, comprised of $60 million in the U.S. and $229 million in foreign jurisdictions. As of December 30, 2017, cash and cash equivalents totaled $638 million, comprised of $54 million in the U.S. and $584 million in foreign jurisdictions.

34



As a result of the Act, the Company's tax liability related to the one-time transition tax associated with unremitted foreign earnings and profits totaled $366 million at December 29, 2018. The Act permits a U.S. company to elect to pay the net tax liability interest-free over a period of up to eight years. See the Contractual Obligations table below for the estimated amounts due by period. The Company has considered the implications of paying the required one-time transition tax, and believes it will not have a material impact on its liquidity. Refer to Note Q, Income Taxes, for further discussion of the impacts of the Act.
In November 2018, the Company issued $500 million of senior unsecured notes, maturing on November 15, 2028 ("2028 Term Notes") and $500 million of senior unsecured notes, maturing on November 15, 2048 ("2048 Term Notes"). The 2028 Term Notes and 2048 Term Notes will accrue interest at fixed rates of 4.25% per annum and 4.85% per annum, respectively, with interest payable semi-annually in arrears on both notes. The notes are unsecured and rank equally with all of the Company's existing and future unsecured and unsubordinated debt. The Company received net proceeds of $990.0 million which reflects a discount of $0.9 million and $9.1 million of underwriting expenses and other fees associated with the transaction. The Company used the net proceeds from the offering for general corporate purposes, including repayment of other borrowings. Contemporaneously with the issuance of the 2028 Term Notes and 2048 Term Notes, the Company paid $977.5 million to settle its remaining obligations of two unsecured notes that matured in November 2018, which related to the Equity Units issued in December 2013 and the Convertible Preferred Units issued in November 2010. Refer to Note H, Long-Term Debt and Financing Arrangements, for further discussion of these arrangements.

In May 2017, the Company issued 7,500,000 Equity Units with a total notional value of $750.0 million ("$750 million Equity Units"). Each unit has a stated amount of $100 and initially consisted of a three-year forward stock purchase contract ("2020 Purchase Contracts") for the purchase of a variable number of shares of common stock, on May 15, 2020, for a price of $100, and a 10% beneficial ownership interest in one share of 0% Series C Cumulative Perpetual Convertible Preferred Stock, without par, with a liquidation preference of $1,000 per share ("Series C Preferred Stock"). The Company received approximately $726 million in cash proceeds from the $750 million Equity Units, net of underwriting costs and commissions, before offering expenses, and issued 750,000 shares of Series C Preferred Stock, recording $750.0 million in preferred stock. The proceeds were used for general corporate purposes, including repayment of short-term borrowings. The Company also used $25.1 million of the proceeds to enter into capped call transactions utilized to hedge potential economic dilution. On and after May 15, 2020, the Series C Preferred Stock may be converted into common stock at the option of the holder. At the election of the Company, upon conversion, the Company may deliver cash, common stock, or a combination thereof. On or after June 22, 2020, the Company may elect to redeem for cash, all or any portion of the outstanding shares of the Series C Preferred Stock at a redemption price equal to 100% of the liquidation preference, plus any accumulated and unpaid dividends. If the Company calls the Series C Preferred Stock for redemption, holders may convert their shares immediately preceding the redemption date. Upon settlement of the 2020 Purchase Contracts, the Company will receive additional cash proceeds of $750 million. The Company will pay the holders of the 2020 Purchase Contracts quarterly contract adjustment payments, which commenced in August 2017. As of December 29, 2018, the present value of the contract adjustment payments was $58.8 million.

In January 2017, the Company amended its existing $2.0 billion commercial paper program to increase the maximum amount of notes authorized to be issued to $3.0 billion and to include Euro denominated borrowings in addition to U.S. Dollars. As of December 29, 2018, the Company had $373.0 million of borrowings outstanding against the Company's $3.0 billion commercial paper program, of which approximately $228.9 million in Euro denominated commercial paper was designated as a Net Investment Hedge as described in more detailed in Note I, Financial Instruments. At December 30, 2017, the Company had no borrowings outstanding against the Company’s $3.0 billion commercial paper program.

In September 2018, the Company amended and restated its existing five-year $1.75 billion committed credit facility with the concurrent execution of a new five-year $2.0 billion committed credit facility (the "5 Year Credit Agreement"). Borrowings under the Credit Agreement may be made in U.S. Dollars, Euros or Pounds Sterling. A sub-limit of $653.3 million is designated for swing line advances which may be drawn in Euros pursuant to the terms of the 5 Year Credit Agreement. Borrowings bear interest at a floating rate plus an applicable margin dependent upon the denomination of the borrowing and specific terms of the 5 Year Credit Agreement. The Company must repay all advances under the 5 Year Credit Agreement by the earlier of September 12, 2023 or upon termination. The 5 Year Credit Agreement is designated to be a liquidity back-stop for the Company's $3.0 billion U.S. Dollar and Euro commercial paper program. As of December 29, 2018 and December 30, 2017, the Company had not drawn on its five-year committed credit facility.

In September 2018, the Company terminated its previous 364-day $1.25 billion committed credit facility and concurrently executed a new 364-Day $1.0 billion committed credit facility (the "364 Day Credit Agreement"). Borrowings under the 364 Day Credit Agreement may be made in U.S. Dollars or Euros and bear interest at a floating rate plus an applicable margin dependent upon the denomination of the borrowing and pursuant to the terms of the 364 Day Credit Agreement. The Company must repay all advances under the 364 Day Credit Agreement by the earlier of September 11, 2019 or upon termination. The

35



Company may, however, convert all advances outstanding upon termination, into a term loan that shall be repaid in full no later than the first anniversary of the termination date, provided that the Company, among other things, pays a fee to the administrative agent for the account of each lender. The 364 Day Credit Agreement serves as a liquidity back-stop for the Company's $3.0 billion U.S. Dollar and Euro commercial paper program. As of December 29, 2018, the Company had not drawn on its 364-Day committed credit facility.

In addition, the Company has other short-term lines of credit that are primarily uncommitted, with numerous banks, aggregating $455.4 million, of which $357.8 million was available at December 29, 2018. Short-term arrangements are reviewed annually for renewal.

At December 29, 2018, the aggregate amount of committed and uncommitted lines of credit, long-term and short-term, was $3.5 billion. At December 29, 2018, $376.1 million was recorded as short-term borrowings relating to commercial paper and amounts outstanding against uncommitted lines. In addition, $97.6 million of the short-term credit lines was utilized primarily pertaining to outstanding letters of credit for which there are no required or reported debt balances. The weighted-average interest rates on U.S. dollar denominated short-term borrowings for the years ended December 29, 2018 and December 30, 2017 were 2.3% and 1.2%, respectively. The weighted-average interest rate on Euro denominated short-term borrowings for the years ended December 29, 2018 and December 30, 2017 was negative 0.3%.

In March 2015, the Company entered into a forward share purchase contract with a financial institution counterparty for 3,645,510 shares of common stock. The contract obligates the Company to pay $350.0 million, plus an additional amount related to the forward component of the contract. In June 2018, the Company amended the settlement date to April 2021, or earlier at the Company's option.

In December 2013, the Company issued $400.0 million 5.75% fixed-to-floating rate junior subordinated debentures maturing December 15, 2053 (“2053 Junior Subordinated Debentures”) that bore interest at a fixed rate of 5.75% per annum, up to, but excluding December 15, 2018. From and including December 15, 2018, the 2053 Junior Subordinated Debentures will bear interest at an annual rate equal to three-month LIBOR plus 4.304%. The debentures subordination and long tenor provides significant credit protection measures for senior creditors and as a result, the debentures were awarded a 50% equity credit by S&P and Fitch, and 25% equity credit by Moody's. The net proceeds from the offering were primarily used to repay commercial paper borrowings. On February 25, 2019, the Company redeemed all of the outstanding 2053 Junior Subordinated Debentures for $405.7 million, which represented 100% of the principal amount plus accrued and unpaid interest to the redemption date.

Refer to Note H, Long-Term Debt and Financing Arrangements, and Note J, Capital Stock, for further discussion regarding the Company's debt and equity arrangements.
Contractual Obligations: The following table summarizes the Company’s significant contractual obligations and commitments that impact its liquidity:
Payments Due by Period
(Millions of Dollars)
Total
 
2019
 
2020-2021
 
2022-2023
 
Thereafter
Long-term debt (a)
$
3,862

 
$
403

 
$
401

 
$
758

 
$
2,300

Interest payments on long-term debt (b)
3,065

 
161

 
310

 
258

 
2,336

Short-term borrowings
373

 
373

 

 

 

Operating leases
533

 
135

 
188

 
98

 
112

Inventory purchase commitments (c)
466

 
466

 

 

 

Deferred compensation
27

 
3

 
5

 
1

 
18

Marketing obligations
52

 
32

 
16

 
4

 

Derivatives (d)
8

 

 

 
8

 

Forward stock purchase contract (e)
350

 

 
350

 

 

Pension funding obligations (f)
44

 
44

 

 

 

Contract adjustment fees (g)
60

 
40

 
20

 

 

Purchase price (h)
250

 

 
250

 

 

U.S. income tax (i)
366

 

 
62

 
102

 
202

Total contractual cash obligations
$
9,456

 
$
1,657

 
$
1,602

 
$
1,229

 
$
4,968

 

36



(a)
Future payments on long-term debt encompass all payments related to aggregate debt maturities, excluding certain fair value adjustments included in long-term debt. As previously discussed, the Company redeemed all of the outstanding 2053 Junior Subordinated Debentures on February 25, 2019. Accordingly, the payment related to the redemption has been reflected in 2019 in the table above. Refer to Note H, Long-Term Debt and Financing Arrangements, for further discussion.
(b)
Future interest payments on long-term debt reflect the applicable fixed interest rate or variable rate for floating rate debt in effect at December 29, 2018. In addition, interest payments related to the 2053 Junior Subordinated Debentures have been adjusted accordingly as a result of the February 25, 2019 redemption discussed in (a) above.
(c)
Inventory purchase commitments primarily consist of open purchase orders to purchase raw materials, components, and sourced products.
(d)
Future cash flows on derivative instruments reflect the fair value and accrued interest as of December 29, 2018. The ultimate cash flows on these instruments will differ, perhaps significantly, based on applicable market interest and foreign currency rates at their maturity.
(e)
In March 2015, the Company entered into a forward share purchase contract with a financial institution counterparty which obligates the Company to pay $350 million, plus an additional amount related to the forward component of the contract.  In June 2018, the Company amended the settlement date to April 2021, or earlier at the Company's option. See Note J, Capital Stock, for further discussion.
(f)
This amount principally represents contributions either required by regulations or laws or, with respect to unfunded plans, necessary to fund current benefits. The Company has not presented estimated pension and post-retirement funding beyond 2019 as funding can vary significantly from year to year based upon changes in the fair value of the plan assets, actuarial assumptions, and curtailment/settlement actions.
(g)
These amounts represent future contract adjustment payments to holders of the Company's 2020 Purchase Contracts. See Note J, Capital Stock, for further discussion.
(h)
The Company acquired the Craftsman® brand from Sears Holdings in March 2017. As part of the purchase price, the Company is obligated to pay $250 million in March 2020. See Note E, Acquisitions, for further discussion.
(i)
Income tax liability for the one-time deemed repatriation tax on unremitted foreign earnings and profits. See Note Q, Income Taxes, for further discussion.

To the extent the Company can reliably determine when payments will occur, the related amounts will be included in the table above. However, due to the high degree of uncertainty regarding the timing of potential future cash flows associated with the contingent consideration liability related to the Craftsman acquisition and the unrecognized tax liabilities of $169 million and $460 million, respectively, at December 29, 2018, the Company is unable to make a reliable estimate of when (if at all) these amounts may be paid. Refer to Note E, Acquisitions, Note M, Fair Value Measurements, and Note Q, Income Taxes, for further discussion.

Payments of the above contractual obligations (with the exception of payments related to debt principal, the forward stock purchase contract, contract adjustment fees, the March 2020 purchase price, and tax obligations) will typically generate a cash tax benefit such that the net cash outflow will be lower than the gross amounts summarized above.

Other Significant Commercial Commitments:
Amount of Commitment Expirations Per Period
(Millions of Dollars)
 
Total
 
2019
 
2020-2021
 
2022-2023
 
Thereafter
U.S. lines of credit
 
$
3,000

 
$
1,000

 
$

 
$
2,000

 
$

Short-term borrowings, long-term debt and lines of credit are explained in detail within Note H, Long-Term Debt and Financing Arrangements.
MARKET RISK
Market risk is the potential economic loss that may result from adverse changes in the fair value of financial instruments, currencies, commodities and other items traded in global markets. The Company is exposed to market risk from changes in foreign currency exchange rates, interest rates, stock prices, bond prices and commodity prices, amongst others.
Exposure to foreign currency risk results because the Company, through its global businesses, enters into transactions and makes investments denominated in multiple currencies. The Company’s predominant currency exposures are related to the Euro, Canadian Dollar, British Pound, Australian Dollar, Brazilian Real, Argentine Peso, Chinese Renminbi (“RMB”) and the Taiwan Dollar. Certain cross-currency trade flows arising from both trade and affiliate sales and purchases are consolidated and netted prior to obtaining risk protection through the use of various derivative financial instruments which may include: purchased basket options, purchased options, collars, cross-currency swaps and currency forwards. The Company is thus able

37



to capitalize on its global positioning by taking advantage of naturally offsetting exposures and portfolio efficiencies to reduce the cost of purchasing derivative protection. At times, the Company also enters into foreign exchange derivative contracts to reduce the earnings and cash flow impact of non-functional currency denominated receivables and payables, primarily for affiliate transactions. Gains and losses from these hedging instruments offset the gains or losses on the underlying net exposures. Management determines the nature and extent of currency hedging activities, and in certain cases, may elect to allow certain currency exposures to remain un-hedged. The Company may also enter into cross-currency swaps and forward contracts to hedge the net investments in certain subsidiaries and better match the cash flows of operations to debt service requirements. Management estimates the foreign currency impact from its derivative financial instruments outstanding at the end of 2018 would have been an incremental pre-tax loss of approximately $52 million based on a hypothetical 10% adverse movement in all net derivative currency positions. The Company follows risk management policies in executing derivative financial instrument transactions, and does not use such instruments for speculative purposes. The Company generally does not hedge the translation of its non-U.S. dollar earnings in foreign subsidiaries, but may choose to do so in certain instances in future periods.
As mentioned above, the Company routinely has cross-border trade and affiliate flows that cause an impact on earnings from foreign exchange rate movements. The Company is also exposed to currency fluctuation volatility from the translation of foreign earnings into U.S. dollars and the economic impact of foreign currency volatility on monetary assets held in foreign currencies. It is more difficult to quantify the transactional effects from currency fluctuations than the translational effects. Aside from the use of derivative instruments, which may be used to mitigate some of the exposure, transactional effects can potentially be influenced by actions the Company may take. For example, if an exposure occurs from a European entity sourcing product from a U.S. supplier it may be possible to change to a European supplier. Management estimates the combined translational and transactional impact, on pre-tax earnings, of a 10% overall movement in exchange rates is approximately $174 million, or approximately $0.96 per diluted share. In 2018, translational and transactional foreign currency fluctuations negatively impacted pre-tax earnings by approximately $100.0 million and diluted earnings per share by approximately $0.55.
The Company’s exposure to interest rate risk results from its outstanding debt and derivative obligations, short-term investments, and derivative financial instruments employed in the management of its debt portfolio. The debt portfolio including both trade and affiliate debt, is managed to achieve capital structure targets and reduce the overall cost of borrowing by using a combination of fixed and floating rate debt as well as interest rate swaps, and cross-currency swaps.
The Company’s primary exposure to interest rate risk comes from its floating rate debt in the U.S. which is based on LIBOR rates. At December 29, 2018, the impact of a hypothetical 10% increase in the interest rates associated with the Company’s floating rate debt instruments would have an immaterial effect on the Company’s financial position and results of operations.
The Company has exposure to commodity prices in many businesses, particularly brass, nickel, resin, aluminum, copper, zinc, steel, and energy used in the production of finished goods. Generally, commodity price exposures are not hedged with derivative financial instruments, but instead are actively managed through customer product and service pricing actions, procurement-driven cost reduction initiatives and other productivity improvement projects.
Fluctuations in the fair value of the Company’s common stock affect domestic retirement plan expense as discussed below in the Employee Stock Ownership Plan ("ESOP") section of MD&A. Additionally, the Company has $85 million of liabilities as of December 29, 2018 pertaining to unfunded defined contribution plans for certain U.S. employees for which there is mark-to-market exposure.
The assets held by the Company’s defined benefit plans are exposed to fluctuations in the market value of securities, primarily global stocks and fixed-income securities. The funding obligations for these plans would increase in the event of adverse changes in the plan asset values, although such funding would occur over a period of many years. In 2018, 2017, and 2016, investment returns on pension plan assets resulted in a $72 million decrease, a $217 million increase, and a $260 million increase, respectively. The Company expects funding obligations on its defined benefit plans to be approximately $44 million in 2019. The Company employs diversified asset allocations to help mitigate this risk. Management has worked to minimize this exposure by freezing and terminating defined benefit plans where appropriate.
The Company has access to financial resources and borrowing capabilities around the world. There are no instruments within the debt structure that would accelerate payment requirements due to a change in credit rating.
The Company’s existing credit facilities and sources of liquidity, including operating cash flows, are considered more than adequate to conduct business as normal. Accordingly, based on present conditions and past history, management believes it is unlikely that operations will be materially affected by any potential deterioration of the general credit markets that may occur. The Company believes that its strong financial position, operating cash flows, committed long-term credit facilities and borrowing capacity, and ability to access equity markets, provide the financial flexibility necessary to continue its record of

38



annual dividend payments, to invest in the routine needs of its businesses, to make strategic acquisitions and to fund other initiatives encompassed by its growth strategy and maintain its strong investment grade credit ratings.
OTHER MATTERS
Employee Stock Ownership Plan ("ESOP") As detailed in Note L, Employee Benefit Plans, the Company has an ESOP under which the ongoing U.S. Core and 401(k) defined contribution plans are funded. Overall ESOP expense is affected by the market value of the Company’s stock on the monthly dates when shares are released, among other factors. The Company’s net ESOP activity resulted in expense of $0.4 million in 2018, income of $1.3 million in 2017, and expense of $3.1 million in 2016. ESOP expense could increase in the future if the market value of the Company’s common stock declines. In addition, ESOP expense will increase once all remaining unallocated shares are released, which could occur as early as 2019.
CRITICAL ACCOUNTING ESTIMATES — Preparation of the Company’s Consolidated Financial Statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues and expenses. Significant accounting policies used in the preparation of the Consolidated Financial Statements are described in Note A, Significant Accounting Policies. Management believes the most complex and sensitive judgments, because of their significance to the Consolidated Financial Statements, result primarily from the need to make estimates about the effects of matters with inherent uncertainty. The most significant areas involving management estimates are described below. Actual results in these areas could differ from management’s estimates.
ALLOWANCE FOR DOUBTFUL ACCOUNTS — The Company’s estimate for its allowance for doubtful accounts related to trade receivables is based on two methods. The amounts calculated from each of these methods are combined to determine the total amount reserved. First, a specific reserve is established for individual accounts where information indicates the customers may have an inability to meet financial obligations. In these cases, management uses its judgment, based on the surrounding facts and circumstances, to record a specific reserve for those customers against amounts due to reduce the receivable to the amount expected to be collected. These specific reserves are reevaluated and adjusted as additional information is received. Second, a reserve is determined for all customers based on a range of percentages applied to receivable aging categories. These percentages are based on historical collection and write-off experience.
If circumstances change, for example, due to the occurrence of higher-than-expected defaults or a significant adverse change in a major customer’s ability to meet its financial obligation to the Company, estimates of the recoverability of receivable amounts due could be reduced.
INVENTORIES — Inventories in the U.S. are primarily valued at the lower of Last-In First-Out (“LIFO”) cost or market, while non-U.S. inventories are primarily valued at the lower of First-In, First-Out (“FIFO”) cost and net realizable value. The calculation of LIFO reserves, and therefore the net inventory valuation, is affected by inflation and deflation in inventory components. The Company continually reviews the carrying value of discontinued product lines and stock-keeping-units (“SKUs”) to determine that these items are properly valued. The Company also continually evaluates the composition of its inventory and identifies obsolete and/or slow-moving inventories. Inventory items identified as obsolete and/or slow-moving are evaluated to determine if write-downs are required. The Company assesses the ability to dispose of these inventories at a price greater than cost. If it is determined that cost is less than market or net realizable value, as applicable, cost is used for inventory valuation. If market value or net realizable value, as applicable, is less than cost, the Company writes down the related inventory to that value.
GOODWILL AND INTANGIBLE ASSETS — The Company acquires businesses in purchase transactions that result in the recognition of goodwill and intangible assets. The determination of the value of intangible assets requires management to make estimates and assumptions. In accordance with ASC 350-20, Goodwill, acquired goodwill and indefinite-lived intangible assets are not amortized but are subject to impairment testing at least annually or when an event occurs or circumstances change that indicate it is more likely than not an impairment exists. Definite-lived intangible assets are amortized and are tested for impairment when an event occurs or circumstances change that indicate it is more likely than not that an impairment exists. Goodwill represents costs in excess of fair values assigned to the underlying net assets of acquired businesses. At December 29, 2018, the Company reported $8.957 billion of goodwill, $2.199 billion of indefinite-lived trade names and $1.286 billion of net definite-lived intangibles.
Management tests goodwill for impairment at the reporting unit level. A reporting unit is an operating segment as defined in ASC 280, Segment Reporting, or one level below an operating segment (component level) as determined by the availability of discrete financial information that is regularly reviewed by operating segment management or an aggregate of component levels of an operating segment having similar economic characteristics. If the carrying value of a reporting unit (including the value of goodwill) is greater than its estimated fair value, an impairment may exist. An impairment charge would be recorded to the extent that the recorded value of goodwill exceeded the implied fair value.

39



As required by the Company’s policy, goodwill was tested for impairment in the third quarter of 2018. In accordance with Accounting Standards Update ("ASU") 2011-08, Intangibles - Goodwill and Other (Topic 350): Testing Goodwill for Impairment, companies are permitted to first assess qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount as a basis for determining whether it is necessary to perform the two-step quantitative goodwill impairment test. Under the two-step quantitative goodwill impairment test, the fair value of the reporting unit is compared to its respective carrying amount including goodwill. If the fair value exceeds the carrying amount, then no impairment exists. If the carrying amount exceeds the fair value, further analysis is performed to assess impairment. Such tests are completed separately with respect to the goodwill of each of the Company’s reporting units. Accordingly, for its annual impairment testing performed in the third quarter of 2018, the Company applied the qualitative assessment for two of its reporting units, while performing the quantitative test for three of its reporting units. Based on the results of this testing, the Company determined that the fair values of each of its reporting units exceeded their respective carrying amounts.
In performing the qualitative assessments, the Company identified and considered the significance of relevant key factors, events, and circumstances that could affect the fair value of each reporting unit. These factors include external factors such as macroeconomic, industry, and market conditions, as well as entity-specific factors, such as actual and planned financial performance. The Company also assessed changes in each reporting unit's fair value and carrying value since the most recent date a fair value measurement was performed. As a result of the qualitative assessments performed, the Company concluded that it is more likely than not that the fair value of each reporting unit exceeded its respective carrying value and therefore, no additional quantitative impairment testing was performed.
With respect to the quantitative tests, the Company assessed the fair values of the three reporting units based on a discounted cash flow valuation model. The key assumptions applied to the cash flow projections were discount rates, which ranged from 8.0% to 9.5%, near-term revenue growth rates over the next five years, which represented cumulative annual growth rates ranging from approximately 5% to 8%, and perpetual growth rates of 3%. These assumptions contemplated business, market and overall economic conditions. Based on the results of this testing, the Company determined that the fair values of each of the three reporting units exceeded their respective carrying amounts. Furthermore, management performed sensitivity analyses on the estimated fair values from the discounted cash flow valuation models utilizing more conservative assumptions that reflect reasonably likely future changes in the discount rate and perpetual growth rate. The discount rate was increased by 100 basis points with no impairment indicated. The perpetual growth rate was decreased by 150 basis points with no impairment indicated.
The Company also tested its indefinite-lived trade names for impairment during the third quarter of 2018 utilizing a discounted cash flow model. The key assumptions used included discount rates, royalty rates, and perpetual growth rates applied to the projected sales. Based on these quantitative impairment tests, the Company determined that the fair values of the indefinite-lived trade names exceeded their respective carrying amounts.
In the event that future operating results of any of the Company's reporting units or indefinite-lived trade names do not meet current expectations, management, based upon conditions at the time, would consider taking restructuring or other strategic actions, as necessary, to maximize revenue growth and profitability. A thorough analysis of all the facts and circumstances existing at that time would need to be performed to determine if recording an impairment loss would be appropriate.
DEFINED BENEFIT OBLIGATIONS — The valuation of pension and other postretirement benefits costs and obligations is dependent on various assumptions. These assumptions, which are updated annually, include discount rates, expected return on plan assets, future salary increase rates, and health care cost trend rates. The Company considers current market conditions, including interest rates, to establish these assumptions. Discount rates are developed considering the yields available on high-quality fixed income investments with maturities corresponding to the duration of the related benefit obligations. The Company’s weighted-average discount rates used to determine benefit obligations at December 29, 2018 for the United States and international pension plans were 4.20% and 2.62%, respectively. The Company’s weighted-average discount rates used to determine benefit obligations at December 30, 2017 for the United States and international pension plans were 3.53% and 2.24%, respectively. As discussed further in Note L, Employee Benefit Plans, the Company develops the expected return on plan assets considering various factors, which include its targeted asset allocation percentages, historic returns, and expected future returns. The Company’s expected rate of return assumptions for the United States and international pension plans were 6.25% and 4.37%, respectively, at December 29, 2018. The Company will use a 5.51% weighted-average expected rate of return assumption to determine the 2019 net periodic benefit cost. A 25 basis point reduction in the expected rate of return assumption would increase 2019 net periodic benefit cost by approximately $5 million on a pre-tax basis.
The Company believes that the assumptions used are appropriate; however, differences in actual experience or changes in the assumptions may materially affect the Company’s financial position or results of operations. To the extent that actual (newly measured) results differ from the actuarial assumptions, the difference is recognized in accumulated other comprehensive loss, and, if in excess of a specified corridor, amortized over future periods. The expected return on plan assets is determined using

40



the expected rate of return and the fair value of plan assets. Accordingly, market fluctuations in the fair value of plan assets can affect the net periodic benefit cost in the following year. The projected benefit obligation for defined benefit plans exceeded the fair value of plan assets by $616 million at December 29, 2018. A 25 basis point reduction in the discount rate would have increased the projected benefit obligation by approximately $81 million at December 29, 2018. The primary Black & Decker U.S. pension and post employment benefit plans were curtailed in late 2010, as well as the only material Black & Decker international plan, and in their place the Company implemented defined contribution benefit plans. The vast majority of the projected benefit obligation pertains to plans that have been frozen; the remaining defined benefit plans that are not frozen are predominantly small domestic union plans and those that are statutorily mandated in certain international jurisdictions. The Company recognized $4 million of defined benefit plan income in 2018, which may fluctuate in future years depending upon various factors including future discount rates and actual returns on plan assets.
ENVIRONMENTAL — The Company incurs costs related to environmental issues as a result of various laws and regulations governing current operations as well as the remediation of previously contaminated sites. The Company’s policy is to accrue environmental investigatory and remediation costs for identified sites when it is probable that a liability has been incurred and the amount of loss can be reasonably estimated. The amount of liability recorded is based on an evaluation of currently available facts with respect to each individual site and includes such factors as existing technology, presently enacted laws and regulations, and prior experience in remediation of contaminated sites. The liabilities recorded do not take into account any claims for recoveries from insurance or third parties. As assessments and remediation progress at individual sites, the amounts recorded are reviewed periodically and adjusted to reflect additional technical and legal information that becomes available.
As of December 29, 2018, the Company had reserves of $246.6 million for remediation activities associated with Company-owned properties as well as for Superfund sites, for losses that are probable and estimable. The range of environmental remediation costs that is reasonably possible is $214.0 million to $344.3 million which is subject to change in the near term. The Company may be liable for environmental remediation of sites it no longer owns. Liabilities have been recorded on those sites in accordance with this policy.
INCOME TAXES — The Company accounts for income taxes under the asset and liability method in accordance with ASC 740, Income Taxes, which requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements. Deferred tax assets and liabilities are determined based on the differences between the financial statements and tax basis of assets and liabilities using the enacted tax rates in effect for the year in which the differences are expected to reverse. Any changes in tax rates on deferred tax assets and liabilities are recognized in income in the period that includes the enactment date.

The Company records net deferred tax assets to the extent that it is more likely than not that these assets will be realized. In making this determination, management considers all available positive and negative evidence, including future reversals of existing temporary differences, estimates of future taxable income, tax-planning strategies, and the realizability of net operating loss carryforwards. In the event that it is determined that an asset is not more likely that not to be realized, a valuation allowance is recorded against the asset. Valuation allowances related to deferred tax assets can be impacted by changes to tax laws, changes to statutory tax rates and future taxable income levels. In the event the Company were to determine that it would not be able to realize all or a portion of its deferred tax assets in the future, the unrealizable amount would be charged to earnings in the period in which that determination is made. Conversely, if the Company were to determine that it would be able to realize deferred tax assets in the future in excess of the net carrying amounts, it would decrease the recorded valuation allowance through a favorable adjustment to earnings in the period that the determination was made.

The Act subjects a U.S. shareholder to current tax on global intangible low-taxed income (“GILTI”) earned by certain foreign subsidiaries. The Financial Accounting Standards Board ("FASB") Staff Q&A, Topic 740 No. 5, Accounting for Global Intangible Low-Taxed Income, states that an entity can make an accounting policy election to either recognize deferred taxes for temporary differences expected to reverse as GILTI in future years or provide for the tax expense related to GILTI in the year the tax is incurred. The Company has elected to recognize the tax on GILTI as a period expense in the period the tax is incurred.
The Company records uncertain tax positions in accordance with ASC 740, which requires a two-step process. First, management determines whether it is more likely than not that a tax position will be sustained based on the technical merits of the position and second, for those tax positions that meet the more likely than not threshold, management recognizes the largest amount of the tax benefit that is greater than 50 percent likely to be realized upon ultimate settlement with the related taxing authority. The Company maintains an accounting policy of recording interest and penalties on uncertain tax positions as a component of Income taxes in the Consolidated Statements of Operations.
The Company is subject to income tax in a number of locations, including many state and foreign jurisdictions. Significant judgment is required when calculating the worldwide provision for income taxes. Many factors are considered when evaluating

41



and estimating the Company's tax positions and tax benefits, which may require periodic adjustments, and which may not accurately anticipate actual outcomes. It is reasonably possible that the amount of the unrecognized benefit with respect to certain of the Company's unrecognized tax positions will significantly increase or decrease within the next twelve months. These changes may be the result of settlements of ongoing audits or final decisions in transfer pricing matters. The Company periodically assesses its liabilities and contingencies for all tax years still subject to audit based on the most current available information, which involves inherent uncertainty.
Additional information regarding income taxes is available in Note Q, Income Taxes.
RISK INSURANCE — To manage its insurance costs efficiently, the Company self insures for certain U.S. business exposures and generally has low deductible plans internationally. For domestic workers’ compensation, automobile and product liability (liability for alleged injuries associated with the Company’s products), the Company generally purchases insurance coverage only for severe losses that are unlikely, and these lines of insurance involve the most significant accounting estimates. While different self insured retentions, in the form of deductibles and self insurance through its captive insurance company, exist for each of these lines of insurance, the maximum self insured retention is set at no more than $5 million per occurrence. The process of establishing risk insurance reserves includes consideration of actuarial valuations that reflect the Company’s specific loss history, actual claims reported, and industry trends among statistical and other factors to estimate the range of reserves required. Risk insurance reserves are comprised of specific reserves for individual claims and additional amounts expected for development of these claims, as well as for incurred but not yet reported claims discounted to present value. The cash outflows related to risk insurance claims are expected to occur over a period of approximately 14 years. The Company believes the liabilities recorded for these U.S. risk insurance reserves, totaling $86 million and $87 million as of December 29, 2018, and December 30, 2017, respectively, are adequate. Due to judgments inherent in the reserve estimation process, it is possible the ultimate costs will differ from this estimate.
WARRANTY — The Company provides product and service warranties which vary across its businesses. The types of warranties offered generally range from one year to limited lifetime, and certain branded products recently acquired carry a lifetime warranty. There are also certain products with no warranty. Further, the Company sometimes incurs discretionary costs to service its products in connection with product performance issues. Historical warranty and service claim experience forms the basis for warranty obligations recognized. Adjustments are recorded to the warranty liability as new information becomes available. The Company believes the $102 million reserve for expected warranty claims as of December 29, 2018 is adequate, but due to judgments inherent in the reserve estimation process, including forecasting future product reliability levels and costs of repair as well as the estimated age of certain products submitted for claims, the ultimate claim costs may differ from the recorded warranty liability. The Company also establishes a reserve for product recalls on a product-specific basis during the period in which the circumstances giving rise to the recall become known and estimable for both company-initiated actions and those required by regulatory bodies.
OFF-BALANCE SHEET ARRANGEMENT
SYNTHETIC LEASES — The Company is a party to synthetic leasing programs for certain locations, including one of its major distribution centers and two of its office buildings. The programs qualify as operating leases for accounting purposes, where only the monthly lease expense is recorded in the Consolidated Statements of Operations and the liability and value of the underlying assets are off-balance sheet.
These lease programs are utilized primarily to reduce overall cost and to retain flexibility. The cash outflows for lease payments approximate the $2 million of rent expense recognized in fiscal 2018. As of December 29, 2018, the estimated fair value of the underlying assets and lease guarantees of the residual values for these properties were $117 million and $100 million, respectively.

42




CAUTIONARY STATEMENTS UNDER THE PRIVATE SECURITIES LITIGATION
REFORM ACT OF 1995

This document contains “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. All statements other than statements of historical fact are “forward-looking statements” for purposes of federal and state securities laws, including any projections or guidance of earnings, revenue or other financial items; any statements of the plans, strategies and objectives of management for future operations; any statements concerning proposed new products, services or developments; any statements regarding future economic conditions or performance; any statements of belief; and any statements of assumptions underlying any of the foregoing. Forward-looking statements may include, among other, the words “may,” “will,” “estimate,” “intend,” “continue,” “believe,” “expect,” “anticipate” or any other similar words.
Although the Company believes that the expectations reflected in any of its forward-looking statements are reasonable, actual results could differ materially from those projected or assumed in any of its forward-looking statements. The Company's future financial condition and results of operations, as well as any forward-looking statements, are subject to change and to inherent risks and uncertainties, such as those disclosed or incorporated by reference in the Company's filings with the Securities and Exchange Commission.
Important factors that could cause the Company's actual results, performance and achievements, or industry results to differ materially from estimates or projections contained in its forward-looking statements include, among others, the following: (i) successfully developing, marketing and achieving sales from new products and services and the continued acceptance of current products and services; (ii) macroeconomic factors, including global and regional business conditions (such as Brexit), commodity prices, inflation, and currency exchange rates; (iii) laws, regulations and governmental policies affecting the Company's activities in the countries where it does business, including those related to tariffs, taxation, and trade controls, including section 301 tariffs and section 232 steel and aluminum tariffs; (iv) the economic environment of emerging markets, particularly Latin America, Russia, China and Turkey; (v) realizing the anticipated benefits of mergers, acquisitions, joint ventures, strategic alliances or divestitures; (vi) pricing pressure and other changes within competitive markets; (vii) availability and price of raw materials, component parts, freight, energy, labor and sourced finished goods; (viii) the impact the tightened credit markets may have on the Company or its customers or suppliers; (ix) the extent to which the Company has to write off accounts receivable or assets or experiences supply chain disruptions in connection with bankruptcy filings by customers or suppliers; (x) the Company's ability to identify and effectively execute productivity improvements and cost reductions; (xi) potential business and distribution disruptions, including those related to physical security threats, information technology or cyber-attacks, epidemics, sanctions or natural disasters; (xii) the continued consolidation of customers, particularly in consumer channels; (xiii) managing franchisee relationships; (xiv) the impact of poor weather conditions; (xv) maintaining or improving production rates in the Company's manufacturing facilities, responding to significant changes in product demand and fulfilling demand for new and existing products; (xvi) changes in the competitive landscape in the Company's markets; (xvii) the Company's non-U.S. operations, including sales to non-U.S. customers; (xviii) the impact from demand changes within world-wide markets associated with homebuilding and remodeling; (xix) potential adverse developments in new or pending litigation and/or government investigations; (xx) changes in the Company's ability to obtain debt on commercially reasonable terms and at competitive rates; (xxi) substantial pension and other postretirement benefit obligations; (xxii) potential environmental liabilities; (xxiii) work stoppages or other labor disruptions; and (xxiv) changes in accounting estimates.
Additional factors that could cause actual results to differ materially from forward-looking statements are set forth in this Annual Report on Form 10-K, including under the heading “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and in the Consolidated Financial Statements and the related Notes.
Forward-looking statements in this Annual Report on Form 10-K speak only as of the date hereof, and forward-looking statements in documents attached that are incorporated by reference speak only as of the date of those documents. The Company does not undertake any obligation to update or release any revisions to any forward-looking statement or to report any events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, except as required by law.

43



ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
The Company incorporates by reference the material captioned “Market Risk” in Item 7 and in Note I, Financial Instruments, of the Notes to Consolidated Financial Statements in Item 8.
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
See Item 15 for an index to Financial Statements and Financial Statement Schedule. Such Financial Statements and Financial Statement Schedule are incorporated herein by reference.

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.

44



ITEM 9A. CONTROLS AND PROCEDURES
The management of Stanley Black & Decker, Inc. (the “Company”) is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external reporting purposes in accordance with accounting principles generally accepted in the United States of America. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.
In April 2018, the Company acquired the industrial business of Nelson Fastener Systems ("Nelson") for approximately $430 million. Since Stanley Black & Decker, Inc. has not yet fully incorporated the internal controls and procedures of Nelson into Stanley Black & Decker, Inc.'s internal control over financial reporting, management excluded this business from its assessment of the effectiveness of internal control over financial reporting as of December 29, 2018. Nelson accounted for 3% of Stanley Black & Decker, Inc.'s total assets as of December 29, 2018 and 1% of Stanley Black & Decker, Inc.'s net sales for the year then ended.
Management has assessed the effectiveness of the Company’s internal control over financial reporting as of December 29, 2018. In making its assessment, management has utilized the criteria set forth by the Committee of Sponsoring Organizations (COSO) of the Treadway Commission in Internal Control — Integrated Framework (2013 Framework). Management concluded that based on its assessment, the Company’s internal control over financial reporting was effective as of December 29, 2018. Ernst & Young LLP, the auditor of the financial statements included in this annual report, has issued an attestation report on the registrant’s internal control over financial reporting, a copy of which appears on page 57.
Under the supervision and with the participation of management, including the Company’s President and Chief Executive Officer and its Executive Vice President and Chief Financial Officer, the Company has, pursuant to Rule 13a-15(b) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), evaluated the effectiveness of the design and operation of its disclosure controls and procedures (as defined under Rule 13a-15(e) of the Exchange Act). Based upon that evaluation, the Company’s President and Chief Executive Officer and its Executive Vice President and Chief Financial Officer have concluded that, as of December 29, 2018, the Company’s disclosure controls and procedures are effective. There has been no change in the Company’s internal control over financial reporting that occurred during the fiscal year ended December 29, 2018 that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting aside from the previously mentioned acquisition of Nelson. As part of the ongoing integration activities, the Company will complete an assessment of existing controls and incorporate its controls and procedures into Nelson.
ITEM 9B. OTHER INFORMATION
None.

45




PART III
ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE OF THE REGISTRANT
The information required by this Item, except for certain information with respect to the Company’s Code of Ethics, the identification of the executive officers of the Company and any material changes to the procedures by which security holders may recommend nominees to the Company’s Board of Directors, as set forth below, is incorporated herein by reference to the information set forth in the section of the Company’s definitive proxy statement (which will be filed pursuant to Regulation 14A under the Exchange Act within 120 days after the close of the Company’s fiscal year) under the headings “Information Concerning Nominees for Election as Directors,” “Board of Directors,” and “Section 16(a) Beneficial Ownership Reporting Compliance.”
In addition to Business Conduct Guidelines that apply to all directors and employees of the Company, the Company has adopted a Code of Ethics that applies to the Company’s Chief Executive Officer and all senior financial officers, including the Chief Financial Officer and principal accounting officer. A copy of the Company’s Code of Ethics is available on the Company’s website at www.stanleyblackanddecker.com.

46



The following is a list of the executive officers of the Company as of February 26, 2019: 
Name and Age
 
Office
 
Date Elected to
Office
James M. Loree (60)
 
President & Chief Executive Officer since August 2016. President & Chief Operating Officer (2013); Executive Vice President and Chief Operating Officer (2009); Executive Vice President Finance and Chief Financial Officer (1999).
 
7/19/1999
 
 
 
 
 
Donald Allan, Jr. (54)
 
Executive Vice President & Chief Financial Officer since October 2016. Senior Vice President & Chief Financial Officer (2010); Vice President & Chief Financial Officer (2009); Vice President & Corporate Controller (2002); Corporate Controller (2000); Assistant Controller (1999).
 
10/24/2006
 
 
 
 
 
Jeffery D. Ansell (51)
 
Executive Vice President & President, Tools & Storage since October 2016. Senior Vice President and Group Executive, Global Tools & Storage (2015); Senior Vice President and Group Executive, Construction and DIY (2010); Vice President & President, Stanley Consumer Tools Group (2006); President - Consumer Tools and Storage (2004); President of Industrial Tools & Storage (2002); Vice President - Global Consumer Tools Marketing (2001); Vice President Consumer Sales America (1999).
 
2/22/2006
 
 
 
 
 
Janet M. Link (49)

 
Senior Vice President, General Counsel and Secretary since July 2017. Executive Vice President, General Counsel, JC Penney Company, Inc. (2015); Vice President, Deputy General Counsel, JC Penney Company, Inc. (2014); Vice President, Deputy General Counsel, Clear Channel Companies (2013).
 
7/19/2017
 
 
 
 
 
Jaime A. Ramirez (51)
 
Senior Vice President & President, Global Emerging Markets since October 2012. President, Construction & DIY, Latin America (2010); Vice President and General Manager - Latin America, Power Tools & Accessories, The Black & Decker Corporation (2008); Vice President and General Manager - Andean Region The Black & Decker Corporation (2007).
 
3/12/2010
 
 
 
 
 
Joseph R. Voelker (63)
 
Senior Vice President, Chief Human Resources Officer since April 2013. VP Human Resources (2009); VP Human Resources - ITG/Corporate Staff (2006); VP Human Resources - Tools Group/Operations (2004); HR Director, Tools Group (2003); HR Director, Operations (1999).
 
4/1/2013
 
 
 
 
 
John H. Wyatt (60)
 
President, Stanley Engineered Fastening since January 2016. President, Sales & Marketing - Global Tools & Storage (2015); President, Construction & DIY, Europe and ANZ (2012); President, Construction & DIY, EMEA (2010); President-Europe, Middle East, and Africa, Power Tools and Accessories, The Black & Decker Corporation (2008); Vice President-Consumer Products (Europe, Middle East and Africa), The Black & Decker Corporation (2006).

 
3/12/2010

47



ITEM 11. EXECUTIVE COMPENSATION
The information required by this Item is incorporated herein by reference to the information set forth under the sections entitled "Compensation Discussion & Analysis" and “2018 Executive Compensation” of the Company’s definitive proxy statement, which will be filed pursuant to Regulation 14A under the Exchange Act within 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The information required by Item 403 of Regulation S-K is incorporated herein by reference to the information set forth under the sections entitled "Security Ownership of Certain Beneficial Owners," "Security Ownership of Directors and Officers," "Compensation Discussion & Analysis" and “2018 Executive Compensation” of the Company’s definitive proxy statement, which will be filed pursuant to Regulation 14A under the Exchange Act within 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.
EQUITY COMPENSATION PLAN INFORMATION
Compensation plans under which the Company’s equity securities are authorized for issuance at December 29, 2018 follow:
 
 
 
(A)
 
(B)
 
(C)
 
Plan Category
 
Number of securities to be
issued upon exercise of
outstanding options and stock awards
 
Weighted-average exercise
price of outstanding options
 
Number of securities
remaining available for
future issuance under equity
compensation plans
(excluding securities
reflected in column (A))
 
Equity compensation plans approved by security holders
 
9,141,523

(1) 
$
107.36

(2) 
15,884,117

(3) 
Equity compensation plans not approved by security holders (4)
 

   

   

   
Total
 
9,141,523

   
$
107.36

   
15,884,117

 
 
(1)
Consists of 7,352,263 shares underlying outstanding stock options (whether vested or unvested) with a weighted-average exercise price of $107.36 and a weighted-average term of 6.35 years; 1,702,142 shares underlying time-vesting restricted stock units that have not yet vested and the maximum number of shares that will be issued pursuant to outstanding long-term performance awards if all established goals are met; and 87,118 of shares earned but related to which participants elected deferral of delivery. All stock-based compensation plans are discussed in Note J, Capital Stock, of the Notes to Consolidated Financial Statements in Item 8.
(2)
There is no cost to the recipient for shares issued pursuant to time-vesting restricted stock units or long-term performance awards. Because there is no strike price applicable to these stock awards they are excluded from the weighted-average exercise price which pertains solely to outstanding stock options.
(3)
Consists of 1,606,224 of shares available for purchase under the employee stock purchase plan ("ESPP") at the election of employees and 14,277,893 securities available for future grants by the Board of Directors under stock-based compensation plans. On January 22, 2018, the Board of Directors adopted the 2018 Omnibus Award Plan (the "2018 Plan") and authorized the issuance of 16,750,000 shares of the Company's common stock in connection with the awards pursuant to the 2018 Plan. No further awards will be issued under the Company's 2013 Long-Term Incentive Plan.
(4)
U.S. employees are eligible to contribute from 1% to 25% of their salary to a qualified tax deferred savings plan as described in the Employee Stock Ownership Plan ("ESOP") section of Note L, Employee Benefit Plans, of the Notes to the Consolidated Financial Statements in Item 8. The Company contributes an amount equal to one half of the employee contribution up to the first 7% of salary.  There is a non-qualified tax deferred savings plan for highly compensated salaried employees which mirrors the qualified plan provisions, but was not specifically approved by security holders.  Eligible highly compensated salaried U.S. employees are eligible to contribute from 1% to 50% of their salary to the non-qualified tax deferred savings plan.  The same matching arrangement was provided for highly compensated salaried employees in the non-qualified plan, to the extent the match was not fully met in the qualified plan, except that the arrangement for these employees is outside of the ESOP, and is not funded in advance of distributions. Effective January 1, 2019, the Company, at its discretion, will determine whether matching and core contributions will be made for the non-qualified tax deferred savings plan for a particular year.  If the Company decides to make matching contributions for a year, it will make contributions, in an amount determined in its discretion, that may constitute part or all of or more than the matching contributions that would have been made pursuant to the

48



provisions of the Stanley Black & Decker Supplemental Retirement Account Plan that were in effect prior to 2019. For both qualified and non-qualified plans, the investment of the employee’s contribution and the Company’s contribution is controlled by the employee and may include an election to invest in Company stock. Shares of the Company’s common stock may be issued at the time of a distribution from the qualified plan. The number of securities remaining available for issuance under the plans at December 29, 2018 is not determinable, since the plans do not authorize a maximum number of securities.

49



ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required by Items 404 and 407(a) of Regulation S-K is incorporated by reference to the information set forth under the sections entitled "Corporate Governance," "Director Independence" and "Related Party Transactions" of the Company’s definitive proxy statement, which will be filed pursuant to Regulation 14A under the Exchange Act within 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.
ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES
The information required by Item 9(e) of Schedule 14A is incorporated herein by reference to the information set forth under the section entitled “Fees of Independent Auditors” of the Company’s definitive proxy statement, which will be filed pursuant to Regulation 14A under the Exchange Act within 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.

PART IV
ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULE
(a) Index to documents filed as part of this report:
1. and 2. Financial Statements and Financial Statement Schedule.
The response to this portion of Item 15 is submitted as a separate section of this report beginning with an index thereto on page 51.
3. Exhibits
See Exhibit Index in this Form 10-K on page 116.
(b) See Exhibit Index in this Form 10-K on page 116.
(c) The response in this portion of Item 15 is submitted as a separate section of this Form 10-K with an index thereto beginning on page 51.

50



FORM 10-K
ITEM 15(a) (1) AND (2)
STANLEY BLACK & DECKER, INC. AND SUBSIDIARIES
INDEX TO FINANCIAL STATEMENTS AND FINANCIAL STATEMENT SCHEDULE
 
Schedule II — Valuation and Qualifying Accounts is included in Item 15 (page 54).
Management’s Report on Internal Control Over Financial Reporting (page 55).
Report of Independent Registered Public Accounting Firm — Financial Statement Opinion (page 56).
Report of Independent Registered Public Accounting Firm — Internal Control Opinion (page 57).
Consolidated Statements of Operations — fiscal years ended December 29, 2018, December 30, 2017, and December 31, 2016 (page 58).
Consolidated Statements of Comprehensive Income — fiscal years ended December 29, 2018, December 30, 2017, and December 31, 2016 (page 59).
Consolidated Balance Sheets — December 29, 2018 and December 30, 2017 (page 60).
Consolidated Statements of Cash Flows — fiscal years ended December 29, 2018, December 30, 2017, and December 31, 2016 (page 61).
Consolidated Statements of Changes in Shareowners’ Equity — fiscal years ended December 29, 2018, December 30, 2017, and December 31, 2016 (page 63).
Notes to Consolidated Financial Statements (page 64).
Selected Quarterly Financial Data (Unaudited) (page 115).
Consent of Independent Registered Public Accounting Firm (Exhibit 23).
All other schedules are omitted because either they are not applicable or the required information is shown in the financial statements or the notes thereto.


51



ITEM 16. FORM 10-K SUMMARY
Not applicable.


52



SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Company has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
STANLEY BLACK & DECKER, INC.
 
 
By:
 
/s/ James M. Loree
 
 
James M. Loree, President and Chief Executive Officer
 
 
 
Date:
 
February 26, 2019
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Company and in the capacities and on the dates indicated.
Signature
  
Title
  
Date
 
 
 
 
 
 
 
/s/ James M. Loree
  
President and Chief Executive Officer
  
February 26, 2019
  
James M. Loree
  
 
  
 
 
 
 
 
/s/ Donald Allan, Jr.
  
Executive Vice President and Chief Financial Officer
  
February 26, 2019
  
Donald Allan, Jr.
  
 
  
 
 
 
 
 
 
 
 
/s/ Jocelyn S. Belisle
  
Vice President and Chief Accounting Officer
  
February 26, 2019
  
Jocelyn S. Belisle
  
 
  
 
 
 
 
 
*
  
Director
  
February 26, 2019
 
Andrea J. Ayers
  
 
  
 
 
 
 
 
 
 
 
*
  
Director
  
February 26, 2019
  
George W. Buckley
  
 
  
 
 
 
 
 
*
  
Director
 
February 26, 2019
  
Patrick D. Campbell
  
 
  
 
 
 
 
 
 
 
 
*
  
Director
  
February 26, 2019
  
Carlos M. Cardoso
  
 
  
 
 
 
 
 
*
  
Director
  
February 26, 2019
  
Robert B. Coutts
  
 
  
 
 
 
 
 
 
 
 
*
  
Director
  
February 26, 2019
 
Debra A. Crew
  
 
  
 
 
 
 
 
 
 
 
*
  
Director
  
February 26, 2019
  
Michael D. Hankin
  
 
  
 
 
 
 
 
*
  
Director
  
February 26, 2019
  
Marianne M. Parrs
  
 
  
 
 
 
 
 
 
 
 
*
  
Director
  
February 26, 2019
 
Robert L. Ryan
  
 
  
 
 
 
 
 
 
 
 
*
 
Director
 
February 26, 2019
 
James H. Scholefield
 
 
 
 
 
 
 
 
 
 
 
*
 
Director
 
February 26, 2019
 
Dmitri L. Stockton
 
 
 
 
 
*By: /s/ Janet M. Link                      
Janet M. Link
(As Attorney-in-Fact)

53



Schedule II — Valuation and Qualifying Accounts
Stanley Black & Decker, Inc. and Subsidiaries
Fiscal years ended December 29, 2018, December 30, 2017, and December 31, 2016
(Millions of Dollars)
 
 
 
 
ADDITIONS
 
 
 
 
 
Beginning
Balance
 
Charged To
Costs And
Expenses
 
Charged
To Other
Accounts (b)
 
(a)
Deductions
 
Ending
Balance
Allowance for Doubtful Accounts:
 
 
 
 
 
 
 
 
 
Year Ended 2018
$
80.4

 
$
28.0

 
$
12.5

 
$
(18.9
)
 
$
102.0

Year Ended 2017
$
78.5

 
$
16.3

 
$
8.9

 
$
(23.3
)
 
$
80.4

Year Ended 2016
$
72.9

 
$
23.2

 
$
4.5

 
$
(22.1
)
 
$
78.5

Tax Valuation Allowance:
 
 
 
 
 
 
 
 
 
Year Ended 2018 (c)
$
516.7

 
$
146.2

 
$
(6.4
)
 
$
(29.8
)
 
$
626.7

Year Ended 2017
$
525.5

 
$
262.4

 
$
22.8

 
$
(294.0
)
 
$
516.7

Year Ended 2016
$
480.7

 
$
74.5

 
$
4.4

 
$
(34.1
)
 
$
525.5

 
(a)
With respect to the allowance for doubtful accounts, deductions represent amounts charged-off less recoveries of accounts previously charged-off.
(b)
Amounts represent the impact of foreign currency translation, acquisitions and net transfers to/from other accounts.
(c)
Refer to Note Q, Income Taxes, of the Notes to Consolidated Financial Statements in Item 8 for further discussion.


54



MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING
The management of Stanley Black & Decker, Inc. is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external reporting purposes in accordance with accounting principles generally accepted in the United States of America. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.
In April 2018, the Company acquired the industrial business of Nelson Fastener Systems ("Nelson") for approximately $430 million. Since Stanley Black & Decker, Inc. has not yet fully incorporated the internal controls and procedures of Nelson into Stanley Black & Decker, Inc.'s internal control over financial reporting, management excluded this business from its assessment of the effectiveness of internal control over financial reporting as of December 29, 2018. Nelson accounted for 3% of Stanley Black & Decker, Inc.'s total assets as of December 29, 2018 and 1% of Stanley Black & Decker, Inc.'s net sales for the year then ended.
Management has assessed the effectiveness of Stanley Black & Decker, Inc.’s internal control over financial reporting as of December 29, 2018. In making its assessment, management has utilized the criteria set forth by the Committee of Sponsoring Organizations (COSO) of the Treadway Commission in Internal Control — Integrated Framework (2013 Framework). Management concluded that based on its assessment, Stanley Black & Decker, Inc.’s internal control over financial reporting was effective as of December 29, 2018. Ernst & Young LLP, Registered Public Accounting Firm included in this annual report, has issued an attestation report on the registrant’s internal control over financial reporting, a copy of which appears on page 57.
 
 
 
 
 
/s/ James M. Loree
 
James M. Loree, President and Chief Executive Officer
 
 
 
 
 
 
/s/ Donald Allan, Jr.
 
Donald Allan, Jr., Executive Vice President and Chief Financial Officer
 

55



Report of Independent Registered Public Accounting Firm

To the Shareowners and Board of Directors of Stanley Black & Decker, Inc.
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of Stanley Black & Decker, Inc. (the Company) as of December 29, 2018 and December 30, 2017, and the related consolidated statements of operations, comprehensive income, shareowners' equity and cash flows for each of the three fiscal years in the period ended December 29, 2018, and the related notes (collectively referred to as the “financial statements”). Our audits also included the financial statement schedule listed in the Index at Item 15(a). In our opinion, the financial statements and schedule present fairly, in all material respects, the consolidated financial position of the Company at December 29, 2018 and December 30, 2017, and the consolidated results of its operations and its cash flows for each of the three fiscal years in the period ended December 29, 2018, in conformity with U.S. generally accepted accounting principles.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company’s internal control over financial reporting as of December 29, 2018, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) and our report dated February 26, 2019 expressed an unqualified opinion thereon.
Adoption of ASU 2016-15 and ASU 2014-09
As discussed in Note A to the consolidated financial statements, the Company changed its method for accounting for cash flows and revenue from contracts with customers in fiscal years 2016, 2017, and 2018 due to the adoption of ASU 2016-15, Classification of Certain Cash Receipts and Cash Payments, and ASU 2014-09, Revenue from Contracts with Customers.
Basis for Opinion
These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.


/s/ Ernst & Young LLP
We have served as the Company’s auditor since 1932.
Hartford, Connecticut
February 26, 2019



56



Report of Independent Registered Public Accounting Firm
To the Shareowners and Board of Directors of Stanley Black & Decker, Inc.
Opinion on Internal Control over Financial Reporting
We have audited Stanley Black & Decker, Inc.’s internal control over financial reporting as of December 29, 2018, based on criteria established in Internal ControlIntegrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). In our opinion, Stanley Black & Decker, Inc. (the Company) maintained, in all material respects, effective internal control over financial reporting as of December 29, 2018, based on the COSO criteria.
As indicated in the accompanying Management’s Report on Internal Control over Financial Reporting, management’s assessment of and conclusion on the effectiveness of internal control over financial reporting did not include the internal controls of Nelson Fastener Systems, which is included in the 2018 consolidated financial statements of the Company and constituted 3% of total assets as of December 29, 2018 and 1% of net sales for the fiscal year then ended. Our audit of internal control over financial reporting of the Company also did not include an evaluation of the internal control over financial reporting of Nelson Fastener Systems.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of the Company as of December 29, 2018 and December 30, 2017, and the related consolidated statements of operations, comprehensive income, shareowners' equity and cash flows for each of the three fiscal years in the period ended December 29, 2018, and the related notes (collectively referred to as the “financial statements”). Our audits also included the financial statement schedule listed in the Index at Item 15(a) and our report dated February 26, 2019 expressed an unqualified opinion thereon.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company's internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.
Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
Definition and Limitations of Internal Control Over Financial Reporting
A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ Ernst & Young LLP
Hartford, Connecticut
February 26, 2019

57



Consolidated Statements of Operations
Fiscal years ended December 29, 2018, December 30, 2017, and December 31, 2016
(Millions of Dollars, Except Per Share Amounts)
 
 
2018
 
2017
 
2016
Net Sales
$
13,982.4

 
$
12,966.6

 
$
11,593.5

Costs and Expenses
 
 
 
 
 
Cost of sales
$
9,131.3

 
$
8,188.3

 
$
7,325.5

Selling, general and administrative
3,143.7

 
2,982.9

 
2,609.3

Provision for doubtful accounts
28.0

 
16.3

 
23.2

Other, net
287.0

 
269.2

 
185.9

Loss (gain) on sales of businesses
0.8

 
(264.1
)
 

Pension settlement

 
12.2

 

Restructuring charges and asset impairments
160.3

 
51.5

 
49.0

Interest income
(68.7
)
 
(40.1
)
 
(23.2
)
Interest expense
277.9

 
222.6

 
194.5


$
12,960.3

 
$
11,438.8

 
$
10,364.2

Earnings before income taxes
1,022.1

 
1,527.8

 
1,229.3

Income taxes
416.3

 
300.9

 
261.7

Net earnings
$
605.8

 
$
1,226.9

 
$
967.6

Less: Net earnings (loss) attributable to non-controlling interests
0.6

 
(0.4
)
 
(0.4
)
Net Earnings Attributable to Common Shareowners
$
605.2

 
$
1,227.3

 
$
968.0

Earnings per share of common stock:
 
 
 
 
 
Basic
$
4.06

 
$
8.20

 
$
6.63

Diluted
$
3.99

 
$
8.05

 
$
6.53

See Notes to Consolidated Financial Statements.

58



Consolidated Statements of Comprehensive Income
Fiscal years ended December 29, 2018, December 30, 2017, and December 31, 2016
(Millions of Dollars)

 
2018
 
2017
 
2016
Net Earnings Attributable to Common Shareowners
$
605.2

 
$
1,227.3

 
$
968.0

Other comprehensive (loss) income:
 
 
 
 
 
Currency translation adjustment and other
(373.0
)
 
478.5

 
(285.8
)
Unrealized gains (losses) on cash flow hedges, net of tax
85.8

 
(66.3
)
 
5.8

Unrealized gains (losses) on net investment hedges, net of tax
59.9

 
(85.2
)
 
76.8

Pension gains (losses), net of tax
2.1

 
5.5

 
(24.2
)
Other comprehensive (loss) income
$
(225.2
)
 
$
332.5

 
$
(227.4
)
Comprehensive income attributable to common shareowners
$
380.0

 
$
1,559.8

 
$
740.6


See Notes to Consolidated Financial Statements.

59



Consolidated Balance Sheets
December 29, 2018 and December 30, 2017
(Millions of Dollars)
 
2018
 
2017
ASSETS
 
 
 
Current Assets
 
 
 
Cash and cash equivalents
$
288.7

 
$
637.5

Accounts and notes receivable, net
1,607.8

 
1,628.7

Inventories, net
2,373.5

 
2,018.4

Prepaid expenses
240.5

 
234.6

Other current assets
58.9

 
39.8

Total Current Assets
4,569.4

 
4,559.0

Property, Plant and Equipment, net
1,915.2

 
1,742.5

Goodwill
8,956.7

 
8,776.1

Customer Relationships, net
1,165.2

 
1,170.7

Trade Names, net
2,254.8

 
2,248.9

Other Intangible Assets, net
64.4

 
87.8

Other Assets
482.3

 
512.7

Total Assets
$
19,408.0

 
$
19,097.7

<